Vision m 30 stuck in recovery with no firmw

hello,my creative zen vision m 30 gb is stuck in recovery mode. I have downloaded the new firmware but the pc does not detect the player. I now have a player with apperantly no firmware that cannot hook up to any pc. I have reformated, reboot, and reloaded firmware (actually only deleted). All the options on the recovery screen I have tried it on a different pc & using different usb cable. Used windows player 0 & . Verified that the device manager does recognize the player. Deleted and reinstalled the player from the device manager. Updated & rolled back the drivers for the device manager.
I have tried downloading new patches, updates to the creative explorer, but they would not execute, they would crash trying to. Each and every time - player not detected. I believe i have exhausted all possibilities of my small knowledge base, searching on the net & on Creative's sites, any help on this would be greatly appreciated. Thanks

You will need a solid Internet connection.  With out it, you will not be able to restore your MBP.  If you have to, go to an Apple store.
A late 2011 MBP came with Lion.
Boot the MBP OPTION+COMMAND+R keys down.
The display should show a revolving globe.
This will connect you to the Apple servers and allow you to install Lion (10.7)
Follow the instructions.
After you have Lion installed, then you can download and install Mavericks (10.9)
Ciao.

Similar Messages

  • Vision M 30GB stuck on recovery m

    My player is stuck on recovery mode. When I turn it on it comes up with "firmware problem" message for a second and went to recovery mode screen. It shows firmware v.6.0_0._.23 and clean up, format all and reload firmware. I tried all the selection and still the same. I downloaded the new firmware and tried to upgrade and came up with upgrade fail message on my pc. I can see dock on the screen and shows zen vision m on the pc.What is the correct way to upgrade the firmware or reinstall the firmware? I can't find old firmware either. Thanks

    branbran,
    Based on your description, it would be advisable to get in touch with support. Check the "Support" folder on your installation CD for Customer Support contact details.

  • Vision m -stuck in recovery,cannot upgrade firmw

    hello there.
    i have a friends zen vision m 30gb here which is stuck in recovery mode,stating version v0.0.6. it is not detected by the pc if i try to upgrade firmware, while the pc detects my own vision m if i run firmware upgrade. is it possible to fix this and might format all
    achieve anything.

    Hi,
    The format probably will not help in this case. if the firmware is not detecting the unit (but works with your own) I'd say perhaps the only option left is try option 3 (reload OS). I would not be optimistic though.
    If there are still problems I'd suggest contacting customer services for a return.
    John

  • Iphone stuck in recovery with itunes logo. wont restore in itunes either. what to do?

    yesterday my iPhone was on the carrier mode 'searching...' and wouldn't find connection, taken sim out put back in. done everything. went to EE store and got told to reset iPhone so that's what I did, from my iPhone. from then it frozen on the restore screen and wouldn't restore. I looked on-line and did recovery mode and now its stuck in recovery and wont restore on iTunes. How do reset and update my phone? HELP

    Had the same thing happen to my iphone 6 that I just purchased 3 weeks ago. I did the latest upgrade to the software ,phone worked fine for the day but later that night it crashed,went to a black screen and would not do anything. I put it into dfu recovery mode to restore which is where it got worse. Phone was locked with the "connect to iTunes screen " and when I tried to restore several times kept getting error code 4003 and 4013. End result was a trip to the genius bar at the Apple Store where it was determined to be most likely some sort of hardware failure so they replaced my phone with what looked like a refurb but so far so good with the new one. Knock on wood. I still believe there are issues with this latest update because although my phone is working it's not running as smooth as it did the first few weeks I had it. I am very disappointed with the ongoing issues with the iPhone's. I've had every model phone from back to the i3 and never had as many issues combined with this latest iPhone 6. Here hoping Apple gets it together or this will be my last ios device!!

  • Stuck in recovery with foreign language can't insatll os COMPLICATED!!

    Stuck in recovery (lanuage is set to foreign country and not changing when clicking on any other country) no wifi connecting tried ethernet not working? Just bought from ebay..2010 macbook pro..it was working fine when first put it on then i wiped the hard drive and tried to reinstall os mavericks but i cant understand any if of it because its in foreign language setting i go up to the right hand corner and change the language but it still just stays the same? I think the airport card could be broke? I put in ethernet and it read it as working but still wouldn't letting me install os? Could someone help?

    A late 2011 MBP came with Lion (10.7).  Since you say that you have erased the HDD, I suggest that you do the following:
    YOU WILL NEED A SOLID INTERNET CONNECTION.
    Boot the MBP with the OPTION+COMMAND+R keys.
    That should result in a display with a revolving globe.
    This will connect you to the Apple servers and allow you to install the original OSX (LION).
    Follow the instructions.
    Installing Lion will create your own account with Apple.
    Then you may download and install Mavericks (10.9) from the App store..
    Ciao.

  • Iphone 3GS (4.3.3) stuck in recovery with latest 10.4iTunes and Safari5.1

    Hi Service Support,
    I need help on this issue.
    Recently my 3GS battery went flat and i recharge it. It prompt me a message error 1604 and i viewed into the information which i follow the remedy steps.
    I download the latest iTune10.4 as well as Safari5.1. Then when I turn off to reboot my laptop but before that i already took out the USB and my phone.
    I reconnect to my laptop. it prompt me another error message' Need to restore your iphone' so i restore it. i restore it and now the restoration is restore half the bar and it is jam there. I tried for the whole yesterday night till now today it stays there.
    Can anyone help me on this?
    Jason

    I’ve managed to get iOS 5.0.1 on now using a differentmachine, if I’d have just though to clear the recent IPSW file and re-downloadI’d have avoided this maybe
    Thanks for your help as well
    Ben

  • Zen vision:m, stuck in recovery mode and cant press "ok&qu

    My zen vision:m is stuck in recovery mode. The real problem I have though is that I cant press the touch button and choose a alternati've. I can scroll and everything, but I just can't press "ok". Anyone have an idea of what I can do to fix this?

    Did you try to revert to Windows Media Player 0 by removing WMP and WMP Runtime ? Then try to add your firmware. It worked for me on a couple of other Creative players and when I was trying to reload firmware, and install the Vision M. Seems to me that I also removed all the Creative software one time, but try reverting to WMP 0 first.
    luvmyrescuedogs

  • My iphone5 is stuck on recovery mode and wont exit

    my iphone 5 gave the option to update carrier on ios7 and is stuck in recovery with no exit

    Force the phone into DFU mode (search Google) and attempt to restore again.

  • Creative Zen Vision 30Gb Stuck in Recovery Mode, Freezes when trying to deal with Firmware

    My Zen Vision is stuck in Recovery Mode. The PC recognizes it but it comes up as 50mb Storage Media. When you touch Reload Firmware or Format All, it freezes and you have to pull the battery out to shut it off. I don't know what to do. Charges fine, never said anything about HARDWARE issues, just can't get it to not freeze when trying to load firmware back onto it.

    I did the same thing, my unit was working perfectly.
    I just read that these players have a laptop 2.5 hard dri've installed in the unit. If this is true, the next chance I get, I will take my unit apart (40 gig nomad zen xtra) and see if I can reinstall the firmware directly. It's probably what they do at the repair sho
    ps.
    Check it out, It may be worth a try!!!

  • Zen Vision M 30GB is stuck in Recovery Mode

    Hi, I have a Zen Vision M 30GB that is stuck in Recovery Mode. I have tried ' Cleaning ', ' Formatting ' and ' Reload Firmware ' but none of my 3 computers in which it was previously used recognise the device. The computers have Win Xp Home, Win xP Pro and Win 7 Pro, 64-bit. I could get it to connect once to my Win 7 and I set the firmware down to .4 ( I think), as I have read that latest Firmware .20 does not recognise some of the new batteries with 400 mAh and 700mAh batteries. I have tried the MP3 Recovery Tool, Creative Wizard tool but none work. Would appreciate any suggestion. I have read extensi'vely the postings about Zen Vision M in the ABIT (anythingbutipod) Forums, but no luck in re-loading the firmware. TIA, MPM

    I had installed .4. and in the Recovery Mode, it dispalys v0.0.6. I have Creative Zen Vision M Media Explorer installed in both, my Xp Home desktop and Xp Pro ( not 64-bit) in my laptop. I will check which version of WMP is installed in my Xp systems.
    On many occasions, all 3 computers (including Win & Pro 64-bit) signalled ' Un-recognised USB Device many times but now nothing happens and I can operate the touch pad of the Zen even when it is connected to the computers !!

  • Vision M stuck on recovery m

    Hi
    I have a Zen Vision M, and when I turn it on, it is stuck on recovery mode. Looking through previous posts, I see this is a common problem, however the fixes that were posted didn't help. I think what needs to happen, is for me to find the original firmware, not the update, since the firmware is probably messed up... if any one knows where I could find the firmware to download, NOT the upgrade which is on the download section, PLEASE post it! Thanks in advance,
    Aaron

    branbran,
    Based on your description, it would be advisable to get in touch with support. Check the "Support" folder on your installation CD for Customer Support contact details.

  • My iPhone 3g is stuck in recovery mode. When I connect to iTunes to restore it shuts off with only 4 mins. left. How can I fix this?

    My iPhone 3G is stuck in recovery mode. When I connect to iTunes to restore it (It takes about 20 mins) it shuts off with only 4 mins left. Can this be fixed?

    unhappy@apple wrote:
    but t say's that it will delet all the my stuff i have on their, can i get some other way?
    Not if it is in Recovery mode.
    -> http://support.apple.com/kb/HT1808
    You can restore from backup.
    -> http://support.apple.com/kb/HT1766

  • IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

    hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
    I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
    help please, this phone is all the means of communication I have.

    It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

  • My iPod touch 4th gen is stuck in recovery mode with a broken 'lock' button.

    My iPod touch 4th generation is stuck in recovery mode with a black screen and I can't get it out. It has a broken lock button and I have tried everything to get it out of recovery mode. Every time I plug it into iTunes, it recognises my iPod and says 'iTunes has detected an iPod in recovery mode. You must restore this iPod before it can be used in iTunes, so I have restored it several times and every time, it says there is an unknown error. Please Help!! (my iPod is IOS 6.0.1)

    What is the complete wording of the error message that says unknown error? Usually more information like a error number is also given.

  • I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help!

    I tried updating my iPhone3g through itunes. Now i'm stuck in recovery mode and i've EVERYTHING even websites and such but nothing worked out! I've also tried restarting and fiddling with the home button but nothing still worked. Please help! What should I do??

    Well, if you've indeed tried EVERYTHING, then you'll need to bring your phone to Apple for evaluation.

Maybe you are looking for

  • Strange Firefox Display problem

    I don't understand why one of my pages isn't displaying properly in Firefox. You'll notice that the main photo window is cut off. It's fine in all other browsers. I'm stumped - any thoughts would be greatly appreciated! http://thewoodshopmalvern.com/

  • Font book doesn't show a preview of a newly installed font

    I purchased the postscript ITC font Zapf Dingbat. It appears in the Font Book list, but there isn't a preview. It works fine in Illustrator, put it appears as Helvetica in Text Edit. Quark Xpress lists it in the font menu, but it doesn't appear in th

  • External enclosure and hard drives for mac g5 quad

    I would like to add an external enclosure with two drives to my mac g5 quad. Does anyone have experience with these or do you know if this will work okay without issues? http://eshop.macsales.com/item/Maxtor/7H500F0/ http://eshop.macsales.com/item/Ot

  • Can't Burn DVD - keep getting "Error during rendering/encoding"...Help!

    I have a new IMac computer with Leopard and I'm having problems burning DVDs. I created a project using IDVD and have audio and pictures (imported individually from Iphoto) that I created into slideshows. I'm try to burn my final copy and continue to

  • Portfolio build download not working cs5.5.

    Hi, So I'm making an interactive magazine and am now ready to build the portfolio, I've downloaded and installed the 'update' but it isn't working when I go back into Indesign to make the portfolio... My deadline if Friday, PLEASSSEEEE help =s p.s. I