Vision M 30GB works in Vista but not XP

So, my Vision M no longer will detect in Windows XP SP3. I think it started happening after I upgraded the firmware it says version 0.22 in revovery mode, so I'm assuming that's correct. Everything works great on it on Vista still, but my main computer is running XP. Is there an easy fix to this problem other than upgrading to Vista?
Basically, what happens is this:
I plug in the MP3 player, the XP detects it and installs the driver, then it says there's a problem with the device it just installed. Afterwards, the Vision M shows up in device manager with an exclamation point next to it and I'm unable to access it through XP.
Please help!
Thanks in advance...

I actually was able to fix it by installing the Microsoft User-Mode Driver Framework Feature Pack (I found this suggestion randomly on another forum since it seems to be a common problem), so thankfully I didn't have to format. Thanks for the help though.

Similar Messages

SanDisk ImageMate works on Vista, but not on Leopard

I bought an iMac when my old Windows XP machine from Dell died last Christmas, and am mostly very pleased with it. I used Boot Camp to install Vista Home Basic on it also, because I still needed to run some Windows software.
I recently acquired a digital camera from my daughter, along with a SmartMedia card reader by SanDisk (model SDDR-55 ImageMate). On the SanDisk website I found a driver for Windows that would work for 95, 98, ME, 2000, and XP. I downloaded it after not finding one for Vista listed. Similarly, there was a driver that would work for Macintosh OSX and OS 10.1. I downloaded it after not finding one specifically for Leopard.
I installed both drivers under their appropriate OSes and plugged the ImageMate into a USB port on the computer. What I found was that it worked fine under Vista but was not recognized at all by Leopard. I contacted SanDisk and they had me verify that it was not a problem with the USB port. Also, they had me try to install it on another Mac (my daughter has a Mac laptop running Leopard) and it didn't work there either. So I know the ImageMate works and the USB port works.
SanDisk then suggested I contact Apple. Is there anything I can do to get the ImageMate working on Leopard?
One thing I noticed was that when I ran Terminal and went to /System/Library/Extensions and looked at a couple of files created during the install on the Mac, the owner and group were different from all the other files, so I made them match the others thinking file ownership might be the problem. Alas, it was not. (I did the install while logged in as admin.)
Can anybody point me in the direction of what to do next?
Thanks in advance,
Sherry

Many thanks to both of you for responding. My guess is that my ImageMate is getting old and SanDisk isn't going to help support it. I'm sure they'd rather I replace it by buying one of their newer models.
One of my lesser attractive qualities is that I am cheap, and hate to throw away anything that still works. Since this little doobie still does (under Vista), I'll probably limp along with it there until I can't stand it anymore and buy a new one. I appreciate learning that some require drivers and some don't: that will help when it comes time to buy a replacement.
Neither here nor there, but this is the 2nd device I've had difficulty with getting to work on Leopard but not on Vista (the other being my HP PSC 1315xi printer/scanner/copier).

ITunes sharing works for Vista but not XP on the same network

So all the basic settings are right under Edit->Preferences to share and seek shared music on the network.
Here's the topology:
A - Vista Laptop (wireless)
B - XP Service Pack 2 Laptop (wireless)
C - XP Service Pack 2 Desktop (wired)
A can see C
C can see A
C can see B
A can see B
B can't see anything
Since the other machines can see B I'm lost... can you help?
Message was edited by: Ryan Buckner

After digging and reading since I posted this question, I finally found the issue. My Cisco VPN client was set to stateful firewall (always on). When I turned off this setting, all machines worked for iTunes sharing. The Vista box was coincidentally working because the Cisco VPN client 4.6 didn't work on Vista.

MPEG-2 playback audio syncing issue (works in Vista but not in OS X)

My setup:
- Mac Mini CoreDuo 1.83GHz, 1 GB RAM
- Elgato EyeTV 410 DVB-T
- Sony KDL-46W2000 FullHD LCD-TV (1920x1080p)
I have a rather complicated problem with audio-video synchronization at MPEG-2 playback. I've spent a lot of hours on troubleshooting in the last weeks without coming up with a solution.
I've installed Vista using Bootcamp on my Mac Mini, and in Vista everything works fine, so it's definitely a problem in OS X and not a hardware issue.
I have a Mac Mini CoreDuo 1.83GHz 1GB RAM. I have done a reinstall of OS X and updated it in Software Update until Software update says my "computer is up to date". So it's completely fresh without any third party software.
As display I'm using my brand new Sony KDL-46W2000 FullHD LCD-TV connected via a DVI-HDMI cable. I don't have to do any custom settings for this display. OS X outputs 1920x1080 progressive without me having to do any additional settings.
The issue is that when I watch DVDs the picture is delayed on the screen about 200 millisec compared to the audio. This isn't the case on all DVDs, but on several DVDs that I've tested. I don't know the differences between the DVDs. It's the same problem if I use VLC to playback so it's not just Apple DVD Player. And it doesn't matter if I use the S/PDIF output to let my receiver decode the audio or if I use the internal speaker in my Mac Mini.
Now to the most interesting part...
In addition to DVD playback problem, I experience the exact same problem with Elgato's EyeTV. But ONLY when using their deinterlace method "Progressive scan". If I use "Always" or "Motion-adaptive" the audio and video syncs just fine.
If I playback other media-files (in Quicktime or VLC) like mov, H264/x264 or XviD everything works just fine and as expected.
As far as I can see the problem only seems to affect MPEG-2 playback. And judging on the troubleshooting with EyeTV deinterlacing and/or progressive scan seems to be involved in some way.
I also tested EyeTV on a PowerBook G4 connected to my TV, and it shows the exakt same problem.

I don't know what causing the problem, but if you play the files with VLC you can adjust the audio synchronization in its "Audio" preferences if you check the "Advanced" box at the bottom-left.

Dual Core Center working in Vista but not XP on a dual boot system?

Hi All.
My system specs are:
Dual Boot Windows XP Pro SP2 and Windows Vista Ultimate
Temps for CPU in Vista averaging at 43 - 45 degrees in XP averaging at 38 to 42 degrees. It never seems to go much higher than 53 on Load.
Thermaltake Soprano tower
MSI K9N Diamond Motherboard
Hiper 580watt Modular PSU
4GB OCZ Gold 6400
AMD X2 6000+
2 X 300gb diamond maxtor 10 HDD
MSI Geforce 7800gt
DVD Rom
LG Dual Layer DVDRW+/-
I am running a dual boot system with Windows XP Pro SP2 on one partition and Windows Vista Ultimate on the other. Both operating systems seem to be operating properly except for an odd situation with Dual Core Center. In Windows XP Dual Core Center only indicates the Mainboard properties - No VGA, whereas on Windows Vista Ultimate Dual Core Center indicates both VGA & Motherboard properties. I have installed MSI Nvidia drivers for the Graphics card & also tried straight Nvidia drivers for the card but it has made no difference VGA will not show up in XP. Yet on installing Dual Core Center on the Vista partition VGA showed up immediately. Can anyone help.
If anyone can come up with an answer to this it would be a real help.
Many Thanks in advance.

have you try to update/install the dual core driver from amd?

F4580 - WiFi works on Vista but not XP???

Just bought a F4580 as needed WiFi (old PSC 1410 still working OK). Have installed onto Vista laptop, fine. Have failed 4 times to get it onto XP laptop despite reaching the stage of recognising the printer on the network and printing the test page, then freezing at 38% saying 'Hardware Problem' "The data is invalid"??? (it does install OK via USB, of course)
I have been through all the 'fixes' on HP website and same result.
Anyone any idea why it gets so close then dies on me? PLEASE.
This question was solved.
View Solution.

Let's add the printer manually since it appears the software is already installed for your USB connection.
Verify that you can browse to the printer's internal web page by typing its IP address into a browser.
1. Click "Start" button --> Printers and Faxes.
2. Under Printer Tasks, click "Add Printer".
3. Click "Next" button on the Add Printer Wizard window.
4. Select "Local printer attached to this computer". Deselect "Automatically detect and install My Plug and play printer". Click "Next".
5. Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
6. In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on and connected to same network that your computer is connected to. Click "Next" button.
7. Under "Add Standard TCP/IP Printer Port" enter the printer's IP address. Click "Next" then click "Finish".
8. Now, select HP from the list of manufacturers, select your printer from the list of Printer models and click 'Next' button.
9. If you can't find your printer, you'll need to find the install CD and use the "Have Disk" option to select one of the hp*.ini files. Alternatively, you can select another HP printer model from the same type.
10. Add the print spooler name and click "Next".
11. Click "Next"
12. Click "Next" and then "Finish"
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

WRT110 works for Vista, but not XP

Today I purchased a new RangePlus router (WRT110) and performed the setup as shown. What's strange is that my Windows Vista laptop, which I used to install the router (via hardwire connection) is able to connect to the wireless router, however, I have a Windows XP desktop (with PCI Linksys wireless card) and laptop both which cannot access the router. Please note that at this time I don't have security enabled on this router (open access).
Is there anything with the Vista "Network Sharing Center" that might block the other computers from accessing the WRT110 router?
Any suggestions on how to resolve this issue would be greatly appreciated.

Wireless connectivity help can be found here.

External monitor. Works with Vista but not detected in Windows 7

I have an external monitor connected to my laptop which runs vista and win 7. However, when I use the WIndows 7 OS, the monitor is not detected. Any tips?

Hi,
Write down Your p/n number which is under Your computer and looks like this.
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Flash Player works in Safari but not Internet Explorer 9

I've installed Flash Player 10.3 and it works in Safari but not Internet Explorer 9. When I look in Manage Add-Ins I see Flash Shockwave but not Flash Player. My operating system is Windows Vista Ultimate (32bit). Safari is 5.0.5 and IE 9 is 9.0.8112.16421. I've tried uninstalling and re-installing Flash Player and uninstalling Norton 360. Nothing has worked so far. Can you help?

Thank you for your reply. Shockwave is loaded and enabled.
The files in flash directory are: a folder called FlashPlayerTrust: file, flash10q.ocx: file, FlashInstall.log; file, FlashUtil10q_ActiveX.dll; file, FlashUtil10q_ActiveX.exe, file, install.log.
There is no file: NPSWF32.dll.
When I test the browsers I get no spinning logo in either Safari or IE9. Safari says: missing plug-in, where I think the logo should be. IE-9 says nothing at the same location.
Thanks.

Spry form validation working in IE but not in Firefox or...

Ok putting together a contact us form and would like a few
fields to be required. It works in IE7 but not in Firefox, Safari
or Google Chrome. In IE7 I get the error msg for no valid email but
in the other browsers it just does nothing. Here is the link to the
page
Aspen
Homes
Can anyone help with this? I have used Spry on a couple other
site and never had an issue. I am updated to the most recent
version also. I am running
Vista Ultimate (64-bit)
DW CS3 or DW CS4 (both do the same thing)
I have attached my code here in a txt file
Page
Code
thanks
B

Anyone?

Rollovers work in Netscape but not IE?

I have the rolloverbuttons working great with Netscape but when I run my app in IE the images aren't showing up. The jar is loading fine and when I use the default rollovers ( [ROLLOVER]exit ) they work fine, but my images aren't showing up. Thanks for any and all help.
Jeremy.

Hytrical wrote:
The site www.lamps-on-line.com has rollovers and actions created a few years ago in GoLive and now these effects only work in Firefox, but not in Interenet Explorer (IE7) which displays page errors.
I didn't see any errors when I looked at yourhome page in IE7 (on Vista). So which page elements were producing an error and what was the error you were seeing? Did you delete the cache in IE7 to check whether it was a caching problem? Tools > Internet Options > Browsing history (choose to delete)?
John

Rollovers & actions work in Firefox but not IE

Hello,
The site www.lamps-on-line.com has rollovers and actions created a few years ago in GoLive and now these effects only work in Firefox, but not in Interenet Explorer (IE7), which displays page errors. Is there a way to fix this? I acknowledge that the site needs replacing but while it's still running my client wants it fixed.
I set up a test page at www.lamps-on-line-com/test.html in which I took off all rollovers and actions, and this loads OK but I really don't want to have to resort to doing this on every page.
I wondered if it is somrthing to do with 'Doctype'?
Hope someone can help.
Stephen

Hytrical wrote:
The site www.lamps-on-line.com has rollovers and actions created a few years ago in GoLive and now these effects only work in Firefox, but not in Interenet Explorer (IE7) which displays page errors.
I didn't see any errors when I looked at yourhome page in IE7 (on Vista). So which page elements were producing an error and what was the error you were seeing? Did you delete the cache in IE7 to check whether it was a caching problem? Tools > Internet Options > Browsing history (choose to delete)?
John

Password works for login but not for the Adobe CC Desktop application

Password works for login but not for the Adobe CC Desktop application

Please refer to http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
ou can try deleting OPM.DB from steps below and try again.
Mac OS: You can locate the OPM.db file in the \User\\Library\Application Support\Adobe\OOBE folder. To access the hidden user Library folder, see Access hidden user library files | Mac OS 10.7 Lion. - http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-f iles.html
Windows: You can locate the OPM.db file in the :\Users\\AppData\Local\Adobe\OOBE folder. To view the hidden AppData folder, see Show hidden files, folders, filename extensions | Windows XP, Vista, Windows 7. -http://helpx.adobe.com/x-productkb/global/show-hidden-files-folders-ex tensions.html
3) update to the latest version of the Creative Cloud app.
Also we would like few more details:
When has this issue started occurring, was this after installation of any specific adobe product.
On which platform are you seeing this.
Also we would like to know if after above steps this issue occurs ever again in future.
You can refer to http://forums.adobe.com/thread/1239510
Regards,
Rajshree

Does Indesign CSS work on VISTA or not?

Does Indesign CSS work on VISTA or not?

By CSS, you mean CC? or CS6? or CS5.5?
The Indesign CC Tech Specs say only Windows 7 and Windows 8.
http://www.adobe.com/products/indesign/tech-specs.html
Indesign CS6 was not supported in Vista either (CS5.5 and earlier were OK)
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-indesign.html
It may still be made to work on Vista but it's untested by Adobe and not a supported configuration.

Custom F4 help in a BSP application working in Mozilla but not in IE

Hi,
I have created a custom F4 help in a BSP application.
It is working in Mozilla but not in IE. I tried enabling javascript as well but still it is not working.
Can someone please suggest a possible solution for this?

Hi,
See simmilar discussion in thread /thread/1883519 [original link is broken]
I think this may be helpful for you.
Thanks,
Chandra

Vision M 30GB works in Vista but not XP

Similar Messages

Maybe you are looking for