Vision M - Not all music displaying in creative Media Explo

When i connect my Vision M to my PC and go into creative Media explorer not all the artists are displayed in the drop down list, i can find them when i go into Creative Media Organizer though..does anyone have any suggestions as to why this would be

Thanks - I've already tried to reinstall the software and there is no update in the download section of microphoto for the Media Explorer.

Similar Messages

  • I have multiple calendars set up but not all are displaying in iOS 7 notification center.  I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary.  Can't get it to show the details of the event.  any ideas?

    I have multiple calendars set up but not all are displaying in iOS 7 notification center.  I just get a heading stating "there is one all-day event scheduled" in the tomorrow summary.  Can't get it to show the details of the event.  any ideas?

    have you tried rebooting your computer?

  • Not all music showing up in iTunes

    The latest version and previous version of iTunes will not show all music in my iTunes Media folder.  All my music files still exist in the Music sub-folder, but only those artists from T - Z are showing in iTunes.  I have tried a previous iTunes library, but it is also not showing all music.   I am on an a 64-bit HP laptop running Windows 7.  Any ideas?  Thanks.

    If you feel that you have enough evidence of the symptoms, use the feedback at http://www.apple.com/feedback/itunesapp.html to let Apple know. The "feedback type" of "bug report" has been removed from the iTunes feedback, so I suggest you use use "Other".
    You will not receive any feedback from them, but they do read the submissions and act upon them. It can take a while, and more than one iTunes update before the issue is resolved.

  • Ipod is synced but not all music will play. The music shows on the Ipod but not highlighted and cannot click to play.

    Ipod is synced but not all music will play. The music shows on the Ipod but not highlighted and cannot click to play.

    Provided the music plays in iTunes on the computer
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync/delete all music and resync
    To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • New version of ITunes installed - Not all music files are being recognized

    My system crashed and Itunes was automatically 're-installed.' My music is located on my external hard drive. When I reconnected my music to ITunes about 3000 music files did not appear in my library. Before the re-install all music files were available in the library.
    The music files are all still located on my external hard drive. Strangely, when I copied my music on my external hard drive to create yet another back up of my music many music files were missing on the copy. The missing files were a combination of downloaded music from a cd and purchased, no trend.
    I welcome any advice on how I can get 1. my ITunes library to read all of my music files (which are in ITunes format) and 2. how do I copy all of my music on my external hard drive to make a safe back up (I-tunes back up is not an option because not all of the music appears in my library)
    Thanks for your help

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Filtering in excel - not all options display in drop down list

    I have found an issue with the filter drop-down list in Excel 2010. I have now been upgraded (by my employee) to Excel 2013 and same problem still exists.
    Problem: I highlight the row containing the column headings; then click on filter (available via the Home tab); then click on the down arrow in the column of interest (in this case "Council Names" column); the drop-down window appears but not all
    council names are displayed in the selection list, even though those council names are still in the list. I am aware of the 10,000 option limit with the selection list, but my spread sheet has well under 10,000 rows (unless there is something hidden that I
    do not know about).
    I have found work-arounds for the problem by searching google for answers to similar problems. I have also spoken to my employee's IT HelpDesk. I will explain the work-arounds I have found below. However, my main concerns now are:
    (1) What is the cause of the problem? Is there are better fix that addresses the cause, rather than having to use work-arounds?
    (2) Is the issue an indication that the spread sheet has been corrupted in some way? - I need assurance that this is not an indication that the spread sheet is unstable and such problems could multiply or already be existing. (The reason I ask
    this is that I had an earlier version of the same spread sheet where the problem did not occur, but it appeared in a later copy - could the copying of the sheet/workbook have caused the problem?)
    Workarounds found:
    (1) Select the entire sheet, then select the filter button in Home tab
    (2) select all the columns manually (click in top left cell and drag down until all data selected), then select filter button
    (3) Ensure all rows in the column of interest are filled in, then select filter button
    I would really appreciate any answers/assistance.

    Hi Jan,
    Thank you very much! Yes you are right - I have looked at the Current Region and the Council Names within that region match those in the filter list. The Current Region does not contain the entire sheet.
    [By the way - there were some errors in my original post: employee should be employer and in my description of the problem the following should read
    "...even though those council names are still in the spread sheet". I assume that this would not change your response?]
    Further questions
    (1) It is odd, though, that an earlier version of the same spread sheet had a complete list of council names (the current range on this sheet contains all of the required rows of the sheet). How did the current region change between versions (I did not knowingly
    do it)?
    (2) Does the above mean that the file, workbook or spread sheet is damaged/corrupted in some way? If yes, can this be corrected and how?
    (3) In addition to (2) above - what is the safest way to copy an excel workbook to minimise risk/avoid future corruption? [I have been copying and keeping earlier versions, partly for testing reasons, but also as a safety measure for the project as
    we are making changes all the time and may decide we wish to go back to the previous version(s)].
    Regards and thanks again,
    Bea Rogers.

  • Latest iTunes update moved some (but not all) Music Videos to Film catalogue.

    iTunes has moved 1 of my music videos (Gorillaz - Feel Good Inc.) to Films so now it appears in my film list instead of my music list. It had somehow changed some of the detils to match one of the films in my Films list (Simon Peggs 'Paul') including it's name (at first I though it had just replaced Pauls image with one from the Gorrilaz song).
    Going into the Get Info menu option to change file types from Film to Music Video is impossible as the 'media kind' dropbox is set to 'Film' and greyed out.
    I've tried deleting and re-downloading it from iTunes but it puts it in the same place. Any ideas how to get this to move back to the music list?
    I've noticed that a lot (although, not all) of the music that I've purchased through iTunes is now duplicated (with a cloud download icon) and was wondering if it was related to this?

    Sign out of the store, sign back in again.
    See Empty/corrupt library after upgrade/crash...
    tt2

  • Computer and ipod crashed. not all music was backed up. please help!

    Ok so both my computer and ipod crashed in the same week. I was able to fix my ipod but had to wipe all the music off of it. I lost all my itunes files on the computer and not all of my music was backed up. I know that's really bad, and I should back up all of my music but I got lazy. Which again is a bad thing! Sorry! But is there anyway to re-download purchases that I made? Someone please help me.

    You can change the email address of one's appleID...
    I'd recommend changing moms email to yours to get a good backup on the Mac
    Then switch mom's back to hers
    Then change your account to the same email you used.
    I've done something similar when I needed to update my Apple account (one ID changing email addresses and phone)

  • Not all music appears in ipod even though memory used and in i-tunes

    How come all my latest music doesn't appear in my ipod. My itunes memory for all music and my ipod memory for music is both about same amount (4.7 gb) and i have no other downloads. It doesnt matter if I resync. I don't wont to have to reset the ipod and resync from scratch again.

    When you plug your ipod in a summary screen comes up in itunes for your ipod. Click on the music tab at the top of the summary screen, that is where itunes gets its information on what to sync or not to sync. What are the settings there set to?

  • Not all music showing up after Match

    I recently subscribed to the iTunes Match service.  Let it run overnight to match and upload my songs.  I woke up in the morning, and my library was about 500 songs smaller! 
    Music Library: 1582 songs, 6.73 GB
    Thankfully I had all my songs backed up, although this proved to be unnecessary, as the music IS still there upon further examination
    All Music smart playlist: 2039 songs, 5.5 days, 8.89 GB
    How odd.  I created a smart playlist to easily identify which songs were and which songs were not in the Music Library
    Now there is a very definite pattern: All the songs not included in the Library are those that (for whatever reason) couldn't be matched
    1 ineligible song + 457 uploaded songs.
    Most of those songs I know are in the iTunes store, so I am not sure why they aren't matched to begin with.

    Are those apps purchased using a different Apple ID?
    On iPhone, start App Store app, tap Updates (bottom right) > tap Purchased > tap Not on This iPhone
    are those apps there?

  • Not all music in iTunes will sync to iPhone4.

    I have plenty of open available space on my iPhone4.  But for some reason, not all the songs in my iTunes library will sync to the iPhone.
    Any ideas??
    Help please!
    Thanks

    apparently you're question is answered because you marked it so ... ?
    anyhoo, what's the capacity of your Touch and what's the total size of the 1500 songs ?
    JGG

  • Mp3 player not showing on sources for Creative Media Souce 5

    I've reinstalled XP (for some unrelated reason) and all my Creative applications work fine except for some reason Creative Media Source 5 isn't showing me my player so I can drag my music to my device. I've reinstalled it, downloaded drivers (from disc) but nothing works. Creative recognize the the device is plugged in. I can synchronize, add media through the Import Wizard but I can't have it listed on Media Source. (image provided) Please help
    http://i446.photobucket.com/albums/q...nOrganizer.jpg

    reynald wrote:
    I can't download the plugin. It says "Setup could not detect the minimum version of Creative 5 5.0.38 in your system." I have version 5.0.25 but when i check for updates it says i already have the latest update.
    http://support.creative.com/download...ownloadId=9834

  • How to play MPEG4 music files using Creative Media Source

    I use iTunes store for buying music pretty much and receive files in MPEG4 format.
    Instead of converting to MP3 I would prefer that my Creative Media Source player/organiser could handle the MPEG4 format. I'm using the Media Source player with an Audigy2ZS and sometimed the older Soundblaster-USB for notebooks.
    Is there an upgrade that I have overlooked or ...
    Or shall I buy a more professional player, like BMP studio?
    I don't like the iTunes player very well!
    /Peter

    I use iTunes store for buying music pretty much and receive files in MPEG4 format.
    Instead of converting to MP3 I would prefer that my Creative Media Source player/organiser could handle the MPEG4 format. I'm using the Media Source player with an Audigy2ZS and sometimed the older Soundblaster-USB for notebooks.
    Is there an upgrade that I have overlooked or ...
    Or shall I buy a more professional player, like BMP studio?
    I don't like the iTunes player very well!
    /Peter

  • Problems installing Creative Media Explo

    I just purchased the Creative Zen 8gb flash player. The box lists system requirements: Windows XP (Service Pack 2) which I have. However, when I went to install the Creative media explorer an error message came up: Not compatible with Windows versions older than 2005. I know I'm working with an older windows version and that's why I check the system requirements prior to purchase. Creative seemed to leave out that the windows version needed to be 2005 or newer. My windows version is Windows XP media center with service pack 2. I went to the windows site and I states that my windows service pack 2 is up to date. The installation process with the CD that came with the player was also a disaster. Had to reboot 7 times and my system stated that windows had serious errors afterwards. I consider myself an medium to advanced technical computer user and can't imagine a person trying to do this with low technical knowledge. This shouldn't be this hard!
    Uggh... I'm quite aware that @pple sells 4 out of 5 MP3 players today. I'm starting to understand why now. If I can't get the player to communicate with my pc it is of no value to me and therefore will have to return for a refund and eat the shipping cost. That is, if Creative will refund as I haven't started that process yet. How frustrating

    I got the same problem. I might know the cause of this, I downloaded windows media player , it might have messed up some things.... However I really don't know how to fix this. Previous files could be converted but now I can't convert those same files anymore. And this was after I installed Windows Media Player , thats the only thing I can think of...

  • I had a virus on the pc I have itunes on.  I had to reload itunes and tell it to find my music.  After gettingh the itunes going again, I reloaded both my ipods and now, purchased music cuts off after 10 seconds.  Not all music but some.

    I had a virus on the pc I have itunes on.  The person who fixed it, put all files in 1 file and put it on the desktop.  I could not access the itunes at all so finally, I reloaded Itunes and got all my music back.  When I synched both my ipods, it had to erase the ipod and load the current page...no problem.  Today I had my ipod on shuffle and the songs started to play.  Then a song came on and it played part of the song and went to the next one.  It started doing this on about every 3 songs.  I got home and tried to play the song off my itunes page and the samething happened.  This is music I bought from itunes.
    I am not a pc person and this is totally frustrating me.
    Any help would be greatly appreciated.
    Thanks in advance.

    Delete and redownload them if doing so is free in your country.
    (98014)

Maybe you are looking for

  • CCP Build Install Issues

    I have been trying all day to get my first CCP build to install. I have engaged Enterprise support as well and made no progress. I have manually uninstalled and used the cleaner app to remove all adobe products (including Flash and Reader). Prior to

  • Another Install question

    Hi all, I'm currenty with sky but will be moving back to BT when Infinity is available (shoudbe June) so my questions is, My mater socket is locted in the hallway and i do not hve a electrical socket in the hallway, cn i get BT to move my master sock

  • RFC's For XI

    I am an XI Developer but I am trying to expand my knowledge into ABAP a little... Basically I want to know how to create an RFC that I can call from XI. I want a scenario where the following is done. In the Sender System I want a Program/Function Mod

  • Regarding Authorization object's changed date..

    Hi All, Could someone help me, I wanna a table name which holds the changed/modify date for Authorization object.. e.g. change date for S_TCODE etc..... Regards, Ankur

  • Slow DTP extraction running on top of a cube with BIA

    Hi Experts, Ive a DTP, which is running on top of a cube, without aggregates. But I have the BIA built for the cube. Its taking 2 n half hour to extract 2 million records which is quite slow. Initial 1 hour of the extraction, it doesnt do anything. I