Vision:m old firmware cause corrupti

Hi,
I have issues with the sound on my vision:m. I have contacted CS-but no joy. I think it was better before I installed the new firmware. I have the old version saved on my PC- I tried to reload this but it gave me a warning and said it may corrupt my files. Does anyone know if this is true?Maybe Cat or Daniel might be able to help or anyone who has done this themselves?Any help appreciated. Thanks?Weezie

Hi Daniel,
Thanks for the quick reply. I have all my files on my music library, I was concerned it might affect the player, crash it or something. So all you think might happen is I might lose my files?
The sound problem is that I was v. happy with my vision:m to start with I have had it since January.
Over the last week or so I have had a popping sound which makes it unbearable to listen to it occurs randomly and if I skip to another track and back again it is fine.
There is already quite a long thread on this as others are also having problems. I have upgraded the firmware and was hoping that if I "downgraded" it might help!!
Any help would be great!
Thanks
Weezie

Similar Messages

  • The platform firmware has corrupted memory across

    1.After S3(STR) wakeup
    System Eventlog
    The platform firmware has corrupted memory across the previous system power transition. Please check for updated firmware for your system.
    Only affect MBR Boot(Legacy boot), Please FIX
    Windows 8 Pro x64
    990XA-GD55, BIOS v23.1(7640vN1)
    2.Why "DDR Phase Control" was removed?
    3.IOMMU device will used(Increase 20.6MB ram used of Hardware reserved), Please FIX
    IOMMU Mode: Disable OR 64MB
    4."Offical(MSI)" provide update exe please
    RENESAS USB3.0 Host Controller Firmware
     Version 4.0.2.0 : June 15th, 2012 (Today: 2013)
    - The following problems are fixed.
     1. Fixed the USB3.0 Host Controller in D3hot didn't send the PME Message
       when it received any wakeup events.
     2. The following issue is fixed by ver 2.1.19.0 of RENESAS USB 3.0 Host
       Controller Driver, but there was a possibility that this could still
       occur in Windows 8:
       [RENSAS USB 3.0 Host Controler Driver ver 2.1.19.0's history]
       1. USB3.0 devices aren't detected when users perform the below steps.
        a) Turn on a PC.
        b) Enter sleep (S3 state) without connecting USB3.0 devices.
        c) Connect USB3.0 devices to a USB3.0 port during S3 state.
        d) USB 3.0 HDD isn't detected.
       The USB3.0 devices aren't detected after the PC resumes from S3 state.
       With Windows 7 or earlier, this issue only occurs with driver Ver.2.1.16.0.
     3. There is a possibility that the USB 3.0 Host controller cannot notify
       the xHCI Driver when the Host controller receives the following contiguous
       Device Notification Transaction Packets:  Function Wake Notification,
       Latency Tolerance Message (LTM) Device Notification, Bus Interval Adjustment
       Message Device Notification.
       We have never seen this problem on a real system.
     4. Improved the interoperability of UAS devices in Windows 8.
     5. The following issue is fixed by ver 2.1.19.0 of RENESAS USB 3.0 Host
       Controller Driver, but there was a possibility that this issue could
       still occur in Windows 8:
       [RENSAS USB 3.0 Host Controler Driver ver 2.1.19.0's history]
       2. There is a possibility of bluescreen caused by Hot-Plug operation of a
         USB3.0 Hub connecting USB3.0 devices. With Windows 7 or earlier, this issue only occurs
         with Ver 2.1.16.0.
     6. Failed the TD7.3 of Link Layer test by using Ellisys Version : 2.0.4210
       and Lecroy Version  1.35 Build107 or later.
       This issue arose from changing the Link Layer test specification.

    I have never and never will use sleep state.  Seems 90% never work.

  • I have a HP LaserJet M4555h MFP, how do I know if my firmware is corrupt, is it in the event log?

    Model of MFP = HP LaserJet M4555h MFP = CE738A
    With fax accessory for HP LaserJet MFP Analog 500 = CE737A
    Firmware Datecode = 20120623
    Firmware Revision = 2200643_228339
    The inital issue was receiving faxes, so I updated the firmware to the above listed.  In the event log it shows since the firmware was updated on Nov 7th the following:
    The device keeps prompting to restart the printer....  I haven't been able to screen capture the message off the device yet... on the Information tab through the EWS it's shown: "An unexpected error occurred. We apologize for the inconvenience.  Please try again."   What is that suppose to mean?
    Faxing has stopped working completely....
    Can you tell me if this means the firmware is corrupt and show be re-loaded?
    Or suggest what my next steps would be?
    Anything is helpful...Thanks  HP Seeker.

    Hello, you can also try a partial clean and reload the latest firmware, see if that will work.

  • Can I use both the Iphone 3GS and 4S on the same computer without causing corruption?

    I want to be able to sync and backup both devices with different song and app selections on the same computer with Itunes. Can I do that without causing corruption or over writing the other phone?

    Yes.  Connect a device to the computer with iTunes.  Click on the device name.  Then click on the various tabs such as Music, Apps, etc. and on each tab there are options to select what to sync on the device.  For example, on the music tab you will be able select which songs to sync.

  • How can I get my old firmware back again?

    With firmware version 2.17 I used to have some problems with my system hanging now and then.
    With firmware 2.30 all my problems were solved and I was happy.
    Stupidly enough I upgraded to firmware verison 2.50 because MSI mentioned better support for various DVD brands.
    Since the upgrade my system again often hangs when trying to acces the drive.
    I WANT MY OLD FIRMWARE VERSION 2.30 BACK AGAIN!!!!!
    Could anyone please help my out by sending it to me or by sending a link where I can find older firware versions??
    Thanks a lot in advance!!
    Sjaak

    from my old phone?

  • Zen Vision:M 60GB firmware: NEEDS 'Disc Number' tag supp

    The Creative Zen Vision:M 60GB firmware (.20.02e) does not recognise the 'Disc Number' part of ID3 tags.
    This is VERY annoying as albums made up of more than one CD do not play in the correct order (they play in order of 'Track Number', e.g. ",,,,2,2,2,2,3,3,3,3,4,4,5,5" etc). I do not want to go through my collection separating these large albums into a messy bunch of single discs.
    This seems like a simple firmware issue: please update it!

    jjwood,
    Although I can understand the situation, please refrain from using bad language which is uncalled for. In any case, if the player is still having problem despite attempt at rescue mode, then contact Customer Support for service. If the store where you purchase the product allow exchanges, it maybe faster to be done through them.
    Jason

  • If my firmware is corrupt, how do I restore iphone and then sync if it is set up as a new phone

    I was told that my 'Springboard' firmware was corrupt and taking my battery life down hard. If I restore my phone as if it is a new one, how then can I sync my stuff back onto it? It seems that if I restort as new, I have no sync info to work with.
    Thanks.

    yes.

  • I reinstalled my system on a new hard drive, from time machine. However my old photos seem corrupt within aperture. iphoto seems okay.  Have you heard of this?

    I reinstalled my system on a new hard drive, from time machine. However my old photos seem corrupt within aperture. iphoto seems okay. New photos take a long time to load as well.
    Have you heard of this?
    Thanks

    We need a little more information to be able to help.
    However my old photos seem corrupt within aperture.
    What kind of corruption? And when do you see it? All your images, or only some? Are the images distorted, discolored, or not displayed at all?
    Are you shooting in raw? Is your library referenced or managed? Is your library on your system volume or on an external harddrive?
    And it would help to know your MacOS version and Aperture version too.
    Regards
    Léonie

  • I was try to restore iPhone 4 but iTunes appear the iphone :iphone: firmware was corrupt? how to restore then

    i  was try to restore iPhone 4 but iTunes appear the iphone :iphone: firmware was corrupt? how to restore then

    Try this
    http://support.apple.com/kb/HT1808?viewlocale=en_US

  • How can i Restore Old Firmware of n73 !

    How can i Restore or update Old Firmware of n73 !
    actually i want old ‎ - V3.0705.1.0.31 some like that !
    becoz new firmware is not good !
    problem in playing songs when i want to play new song its show all songs list from begning
    in old version easy to select any song
    and itz very slow
    please can any tell me how can i get it back in old one please
    my n73 is old
    date 2007 
    please help me

    You can't.
    What you can do is go to your nearest Nokia Care Point and explain the situation and why you'd rather roll back to an older version. They might be able to flash the phone with older firmware but there's no guarantee that they will.
    Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

  • HT5552 I see mediocrity is still trademark of Apple. Cannot enter my Visa number to make a purchse. Mind you my old iTunes got corrupted (again); so info should still be there.

    I see mediocrity is still trademark of Apple. Cannot enter my Visa number to make a purchse. Mind you my old iTunes got corrupted (again); so info should still be there.

    Hi Aidan123,
    Welcome to the forum and thanks for your post!
    Sorry for the problems you've had getting set up on BT Mobile and getting your number transferred across.  You can send over your details and I'll help you with this from here.
    Click on my username and under the "about me" section of my profile you'll see the link to get in touch with us.
    Cheers,
    Robbie
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Airport Extreme, need old firmware, help

    I have an airport extreme and I need to revert back to an older version of the firmware. Specifically I need the 7.2.1 firmware.
    A link is here, http://support.apple.com/kb/DL218  And it does not work...
    Where can I find a copy of that specific firmware?

    The reason:
    I have jailbroke my apple tv and I an using the extreme as a hub to pass through my hard drives so I can see them on XBMC (XBMC is the media center program I am running on the apple tv box)... I need the old firmware so I can make it work...
    When I recieved the extreme this morning it had 7.2.1 installed on it... But I am a retard and upgraded because I did not know it woudl be a problem... Then to make things worse, I was not aware that upgrading the firmware was the problem, I thought it was the utility settings I had changed, so I removed the utility and reinstalled it... So now I do not have the option to fall back on 7.2.1, which was installed this morning...
    So I am hoping to find a copy somehow so I can restore it and make this all work the way I want it to... It sure would be cool if the apple link worked, so I could restore it that way...

  • Zen NX reverted to old firmware - won't display new firmwa

    I upgraded my firmware quite a long time ago on my Zen NX. I was having trouble recently getting creative mediasource to recognize my player on my new computer (still haven't figured that one out), so I went through all the usual stuff where you clean up and reboot and all that. Well, after the reboot the player was displaying the old firmware with the scroll down menus rather than the graphic tabs (and with a few extra bugs too like when I turn it on now it always goes to the menu screen with volume set on '7' and will often say "add tracks to playlist" when there are already tracks in the playlist). I've reloaded, erased again, loaded again, cleaned up, rebooted and it STILL displays the old format firmware (and the little bugs appear to still be there too). Any ideas other than format the player?

    The "tabs" view is an option on the player's setup menu - figured it out!

  • Firmware File Corrupt

    Hello,
    Each time after dowloading, updating, backing up all of the sudden the same error came up for both my iPhone and hubby's iPod Touch:
    Firmware File Corrupt
    Unconnect, reconnect, and try again later
    Anyone know if this is due to way too much traffic on iTunes or did something go wrong in download? Thinking that was possible, I attempted to download again and it of course told me that I had "already purchased and dowloaded the update would I like to download again for free?" I tried that too, same error as stated above!!!!!
    Has anyone else seen this error message?
    Thanks!

    excellent news. glad you're up and running again.
    apologies for the nosy question, but what make and model of firewall was blocking the software server for you? (i'm trying to get a heads-up on possible culprits with this, apart from CyberSitter.)

  • I update my iphone 4g .now not working how to find old firmware version

    i update my iphone 4g to newer version ios 7.now not working how to find old firmware version

    Downgrading the iOS version is not supported by Apple.
    Without know how it is not working:
    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar                                              
    BTW you posted in the iPod touch forum

Maybe you are looking for

  • Windows 7-Internet Explorer 8 and Mozilla Firefox 3.5

    Hi friends; I want to share that great news which is posted Steven Chan (Oracle Development) : I'm very pleased to announce that Microsoft Windows 7 desktop clients are certified for the Oracle E-Business Suite. Both Microsoft Internet Explorer 8 and

  • Hdiutil: attach failed - No such file or directory, in Maven Projects using applescript??

    Hi All. am trying to mount the application which is present in some module named x, am using Maven projects here, so for my mounting the app am using shell script and  i have given path of the application which is present in module x. If a try to run

  • Remove background picture file name from my macbook pro

    I have a 17" macbook pro with MAC OS 10.7.5 and was trying to access the desktop pictures to copy the images.  I entered a command that I thought would reveal the hidden picture folder and instead my dispaly now not only shows the image but also its

  • How can I make Color Tags color the whole line?!

    All, I have been using Color Tags every since they first  appeared on the Mac. It WAS great to color code files and folder of which I now have hundreds done that way. Problem is that now Apple has done away with the easy to see, easy to use colored l

  • How to erase Photos on iOS 6?

    Updated to iOS 6 , love it, but now I can not erase pics on devise! Trying to free up space urgently! Used to erase pics and vids before with older iOS pretty easily .