Vision M stays in docked mode. How do I "undock"

Hi. Just purchased my Vision M yesterday. When I connect it to my Media Center PC, the PC recognizes the Vision and it immediately goes into "docked" mode. At that point I can sync it with media center, use the vision explorer, etc. My question is... The manual says not to disconnect it while in "docked" mode, but even once I've exited windows media player, mediasource, vision media explorer, it stays in "docked" mode. I ended up disconnecting it anyway and it just said "updating" briefly and then appears to funtion normally. I'm just afraid of damaging the Vision by disconnecting it while it says "docked". Is there a way to "undock" it before disconnecting it's
Thanks!!!
Kevin

I just got mine too. I think the "docked" mode refers to when you are transferring data and not when it is doing nothing. The symbol in the middle only moves when it's transfering data. I hope so, because I keep taking mine out of the dock without any adverse effects !! .

Similar Messages

MY ZEN VISION M STAYS IN RECOVERY MODE!!!!!! HELP!!

i bought a zen vision m two week agoi was listening music today and it just freezedi inserted and removed a thin object from the reset hole and the display got black and after some time "zen" came out and after like 5 minutes it apeared on the display the recovery mode y cleaned it up but nothing happnd i formated it all and nothing happnd againi turned it offf and "zen" came out again and after some minutes the recovery mode came again and it happnds the whole time!!!!!!!!!I NEED HELP!!!!!!!

Try taking the battery out and replacing it. Did this once when I was stuck in Recovery, and it worked.

Camera stays in video mode how do I change to take photos

Need help changing camera from video to photo!

Drag the Video / Photo / Square options so that 'Photo' lines up with the yellow dot to their left

My iphone 4s is permanently stuck in dock mode when it is not connected to a dock, and it will not play music. How do I fix this? Every time I have this problem I have to get it replaced

My iPhone 4s has been replaced at least 4 times within a year and nobody at the genius bar seems to know what's wrong but every time I plugy phone into my cable that connects my iPhone to the stero in my car and when I disconnect it, my iPhone think its in dock mode and will not play music or sounds with our being plugged into a dock. However it will occasionally make sounds when a text comes in but that's about it. I really don't know why this happens or how to fix it, HELP!!

Try This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

How to stop printer icon staying in dock everytime i print

hi all
basically i want to know to stop how to stop printer icon staying in dock everytime i print
whenever i print it stays there, and doesnt disspear everytime automatically

When you print your next document, right click or control click on the printer icon in the Dock. This will provide you with a menu of options. One of them is Auto Quit. Select it. Quit the printer queue and then print another document. The printer "app" will now quit after a successful print.
Hope this helps.

My iTouch 1g wont finishing restoring & stays in recovery mode. How do i fix it?

My iTouch 1g wont finishing restoring & stays in recovery mode. How do i fix it?

- Any error messages?
- At what stage does the restore freeze? What is shown in the staus bar?

How much time can an ipad mini stay in sleep mode with the smart cover on

How much time can an ipad mini stay in sleep mode with the smart cover on?

Hello Kavans,
Thank you for the details of the issue you are experiencing with your MacBook Pro. I recommend reviewing the following article for this issue:
Mac OS X: Why your Mac might not sleep or stay in sleep mode
http://support.apple.com/kb/HT1776
Thank you for using Apple Support Communities.
Best,
Sheila M.

HT1369 my 3gs is stuck in restore mode and when i hook it to my computer to update it goes all the way thru till its to the part where its waiting for iphone and that's it it stays there no matter how long i leave it hooked up.. does anyone know how to fi

my 3gs is stuck in restore mode and when i hook it to my computer to update it goes all the way thru till its to the part where its waiting for iphone and that's it it stays there no matter how long i leave it hooked up.. does anyone know how to fix it??

That does happen. It depends on how hard the server is being hit, as well as the connection speed of your system. If you are on a windows system, you will want to disable any antivirus or firewall software during the download.

My IPOD classic 6 will no longer stay in sleep mode. It's less than 2 years old

My IPOD classic 6th generation will no longer stay in sleep mode and it is less then 2 years old. It is running the battery down because of this. Does anybody know how to fix this issue? I have use the hold button when I put it in sleep mode. I have already restored my IPOD and that only worked temporarily. I've charged my battery fully and synced my IPOD and reset to the original settings my IPOD, but none of them worked.

Reset your iPod.
Turn the Hold switch on, then off again and then press-and-hold the Menu and Select (centre) buttons at the same time for at least ten seconds. During this time, you should see the Apple logo appear on the iPod. After a while (it could take up to four minutes) the iPod should display the Main Menu screen and it will be ready to go.
Then see if the iPod sleeps correctly. If it doesn't, you may need to Restore the iPod. To do that, connect it to your iTunes Library and by looking at the iPod through iTunes, you will see the Restore button.
Be aware that a Restore will remove all the content from your iPod and (if you if you use Sync to manage your iPod) put back only what is in your Library. If you use Manually Manage, then you will have to manually add back everything that you want to be on the iPod.
If neither of these steps cures the issue, that may suggest a hardware problem.

Icons not staying in dock!

Today, for no apparent reason several of my application icons refuse to stay in Dock, including Safari, Address Book and Mail. When I move the icons to the doc after 2-3 seconds they move out. When I right clock and check "Keep in Dock", it does not remain checked and does not show "remove from dock". I already tried reloading my Mobileme preferences with my Macbook, and it didn't work.
I would appreciate any suggestions.
Thanks

this still is most likely a mobileme problem. how exactly did you reload mobileme preferences?
try this link
http://support.apple.com/kb/HT1497
if that does not work reset the whole sync folder as described here
http://support.apple.com/kb/TS1627

Why Won't Mail Icon Stay in Dock Where I Place It?

on Mac G5 Power PC 10.5.8. My Mail icon keeps moving to the right most position on my dock (dock is at bottom of screen) and will only stay in dock while the Mail application is open. When I close Mail, the icon completely disappears. I want my Mail icon to appear on the left side of the dock. When I drag mail icon to left, after a few seconds it automatically moves to the right end (next to the left side of the separator in the dock).
I would appreciate some help. Happened only after I updated to 10.5.8. Thank you. Dale (see my other dock-related issue with my Intel iMac - also after I updated to 10.5.8).

I did exactly as you described, locating the plist file and moving it from Library/Preferences to the desktop. I logged out, logged back in, and Mail started on the left side of my Dock and then promptly shot to the right. It is now to the left of a Google quick search box, an Applications Folder, a Documents folder, and a Downloads folder. I want the mail icon on the left side of my screen. How can I ensure that?

My ipod touch 5 gen still in recovery mode how can i get out in recovery mode? i update it in ios 6.2 while my itouch is in jailbrake

my ipod touch 5 gen still in recovery mode how can i get out in recovery mode? i update it in ios 6.2 while my itouch is in jailbrake

Google "DFU mode", put it in that mode and Restore it in iTunes.
And stay away from jailbreaking.

Satellite P100 will not stay in hibernate mode

Hi everyone~
Satellite P100
Vista
Before going to bed I always put my computer in hibernate mode. It won't stay in hibernate mode. I'm not talking about sleep mode here.
I click the start button then choose hibernate. It goes into hibernate and I go to bed so I don't know when it goes out of hibernate mode.
I used to have to press the power button to get it up and running after it went into hibernate. Along the front of the computer are 5 blue lights. I will call them a,b,c,d, and e.
d&e are generally off when I'm using the computer.
a, b, and c are lit up when I'm on the computer. When it goes into hibernate mode b goes out.
When I get up in the morning a,b and c are all back on and all I have to do is move my mouse around then log on instead of first pressing the power button.
I have some scheduled tasks but I've always had those.
Please help. Is there a setting I can do to take care of this issue? TIA

You can create an on task!!!
- go to Start > Control Panel > System and Maintenance > Administrative Tools > Task Scheduler- In the far right pane, click Create Basic Task.
- In the Create Basic Task Wizard, type the name of your task then click Next.
- schedule based on the calendar, click Daily, Weekly, Monthly, or One time and click Next.
- Leave Start a program selected and click Next.
- For Program/script, use this path C:\Windows\System32\Wuapp.exe (but you path could be different).
- Click Next and then click Finish.
For details you coudl also check this MS page:
[Schedule a task - How to|http://207.46.197.98/Windows/en-US/Help/d2a0a504-6a29-4358-b04b-d4bd1abf36c51033.mspx]
_But if you want to change ONLY the Windows update then go here:_
- Control Panel -> Windows Update
- On the left click Change settings
- There you can set the date and time when the update should be installed
Regards

Airport Extreme won't stay in Bridge Mode

I have the AE being used as a USB print server and for some reason it doesn't stay in Bridge mode. Every few days/weeks I have to run the AirPort Utility and put it back on Bridge Mode. No idea how/why it gets reset.
I am printing over the network (not wireless) from two iMacs. The AE is plugged into a router in the basement. Any other configuration options I could try?

I'm having a similar problem and I'm at wit's end. I know almost nothing about hardware.
My DSL comes in through AT&T on a Motorola MSTATEA (whatever that is) modem and goes to a single iMac. The brand new Airport Extreme handles my 802.11n network (several iMacs) without a problem.
When I change the configuration to be DSL modem > AE > wireless iMacs, there is DSL for everybody for a short period of time (seconds to minutes). Then I get a very ugly error message (I believe an exclamation mark on a red background) saying that 192.168.1.64 (the address printed on the modem) is in use by 00:1b:63:... (not the MAC ID of my Airport Extreme) Server 192.168.1.254. Airport Utility starts and tells me I must set up my AE in bridge mode. I do that successfully, restart my hardware, and the whole cycle begins again. Airport Utility keeps telling me my AE needs to be changed bridge mode, and I keep doing it. Is there a way to verify that the AE ever even accepts to the command to go to bridge mode?
--Scott

When trying to download 4.1.5f WAE stays in pending mode

in the process of upgradinf from 4.13b to 4.1.5f
, CM is at 4.1.5f, when start a software upgrade most of the WAEs upgrade ok, but a couple stay in pending mode and when I look at the syslog i see the following message:
2010 May 5 21:54:54 BATWAD01 java: %WAAS-CMS-4-700002: ce(DataFeedPoll): java.l
ang.IllegalStateException: Managed store key does not exists, which is needed to
process SslCertificateKey objects. Rejecting updates from CM: java.lang.Illegal
StateException: Managed store key does not exists, which is needed to process Ss
lCertificateKey objects. Rejecting updates from CM      at com.cisco.unicorn.dir
ector.DataFeedAgent.storeUpdateInternal(DataFeedAgent.java:251)         at com.c
isco.unicorn.server.ADataFeedAgent.storeUpdate(ADataFeedAgent.java:755)        a
t com.cisco.unicorn.server.ADataFeedAgent.onUpdate(ADataFeedAgent.java:510)    a
t com.cisco.unicorn.server.ADataFeedAgent.getUpdatesFromCurrentCdm(ADataFeedAgen
t.java:1230)    at com.cisco.unicorn.server.ADataFeedAgent.getUpdates(ADataFeedA
gent.java:956) at com.cisco.unicorn.director.DataFeedAgent.getUpdates(DataFeedA
gent.java:1248)         at com.cisco.unicorn.server.ADataFeedAgent.runImpl(AData
FeedAgent.java:678)     at com.cisco.unicorn.server.AModule.run(AModule.java:177
)       at java.lang.Thread.ru
I do not use SSL so not have any keys
How do I download the new code and get rid of thepending message
can I just do the CLI "copy ftp install" command?

Hi,
Do you have any alarms in the box. I faced the same issue and it had an SSLAO alarm. I downgraded to 4.1.3b, disabled SSLAO and upgraded 4.1.5f .It worked. I am not sure thats a perfect solution, but it worked for me

Vision M stays in docked mode. How do I "undock"

Similar Messages

Maybe you are looking for