Vision M, ZEN, 30GB, Music Analyzer probl

When trying to use the music analyzer, the (Acuisition In Progress) window opens then shortly after a window titled (Acti've Movie Window) pops up and the analyzer sto
ps.
Any ideas on how to fix this problem? Support has been no help.

UPDATE: I tried transferring using the 'add media' option and it came up with an error message saying there wasn't enough space for the files. As I said, it's a '60GB' player, and says it has more than 6GB free space left... Is it really full? Incidentally, I've disabled the disk partition thing, so it's not that taking up space. Help!

Similar Messages

  • MediaSource Music Analyzer prob

    Hi,
    I am using MediaSource 3.30.2 together with a X-Fi and a Zen Micro. When I am using Music Analyzer it works without problems as far as acquiring track information goes. But the problem is that everytime I use it the program gathers information for the whole Library again. I have uninstalled every Creative software on my system, cleaned the registry and reinstalled, to no avail. The software is supposed to only gather information for new tracks if I understand correctly. Maybe someone can help with this problem.
    Regards

    hello there! i would be happy if you could help me.
    when i attempt to start music analyser it gives this error message: "unable to load music analyzer engine"
    what could be the reason for this? and how could it be overcome?
    could you please reply to : [email protected] ?
    thanks in advance!
    atakee

  • Creative Zen loading music problem

    "Creative Zen loading music problem?I just started using a creative zen (DVP-FL000, 6Gb) player and i'm having?a few issues copying music onto it.
    I have loaded the latest firmware (.2.03e) onto it and formatted it so was clean when i started loading my music on.
    I'm using winamp on winxp to copy my music to the player, but occasionally i get tracks that wont copy to the player. Winamp just shows 'unspecified error'. If a file fails to copy it will never copy, no matter how many times i try. Somtimes its a random track, sometimes an entire album.
    So i also tried copying the tracks that wont copy using windows explorer, it appears to copy but the file never appears on the device. The same is also true when i try it on my Windows7 laptop with explorer, it will appear to be copying but then part way through it will report that the device has stopped responding.
    It only seems to happen with windows media files, all my mp3s copy fine. The files that dont copy probably represent about 0% of my music but play fine on all my other players.
    sorry for the long post, just really scratching my head with this one!
    anyone have any ideas?

    solved
    did a 'clean up' in the recovery menu, no problems transferring tracks since

  • Music Analyzer / Synthesizer

    I seem to remember reading about a Mac program that can 'listen' to a piece of music, analyze the instrumentation and style, then generate new music based on what it finds. What I'm looking for is a program that I can 'seed' with a piece of music and have it generate similar music. This music would them be used as a background track for slideshows, etc. (personal use only). Sorry I can't be more detailed, but I have zero knowledge in this area.

    What is the current version of your Creative MediaSource?
    Have you downloaded and installed the latest Creative MediaSource v3.30.2 from your product Web download site? Let us know the result.Message Edited by micromouse on 08-3-2005 06:30 AM

  • Smart Playlists' Music Analyzer takes a

    I've had various versions of MediaSource for about fi've years, but I've just recently tried using the smart playlist functions.
    I ran the once-off music analyzer tool for volume and tempo on my collection of ~8000 mp3/wma files. This took a lot longer than I had bargained for. My PC is from late 200 but it's not ridiculously slow. IT TOOK 3.5 DAYS. It's a P4 .66GHz with 52Mb RAM running XP SP2. I had stopped all unnecessary processes for this, and even removed my wallpaper to save RAM (although I don't think RAM is the issue as the analyzer seems to only process one file at a time).
    Is this normal?
    ThanksMessage Edited by duffmagic on 03-2-200604:47 PM

    highice wrote:
    Hi,
    I have tried running that tool too with no luck i'm afraid.
    I have a collection of around 6000 MP3S/WAVS
    It takes ages to run on my machine, and processes one track at a time. AMD X2 3800, 2GB ram, 2X7800gt's SLI, SB Audigy 2ZS, Raptor sys Dri've.
    It gets about Half way through and just stops, after restarting pc you can resume scanning from the last track processed, I was happy when I saw this. It was a short li'ved happiness however, I hit the resume button and it resumed into the paused/crashed state it was originally in before the restart. NICE.
    I could always uninstall, reinstall, run it again, sit staring at the screen until it gets to the same point, note the offending file, remove or rencode the offending file, hope no more files offend it or will have to uninstall/reinstall again, then resume scanning............... Sod it I think I can li've without it :-)
    not much help sorry, more of an opinion
    What is the version of your Creative MediaSource?

  • Creative MediaSource 3.30.35 - Music Analyzer is

    Hi all,
    Just playing around for the first time with the MediaSource program. I have started the Music analyzer to rate the BPM and only 40 tracks out of the 350 available tracks in the PC-library have been rated. All other have a '-'sign in the BPM property column(Dutch: Tempo). So my Smart Play Lists are rather empty...:-)
    Any help on this is appreciated.
    Regards,
    Egbert, The Netherlands

    The issue is related to the performance of the MediaSource software which is somewhat unpredictable. I have deleted the media database to force an refresh of the PC music library and started the music analyzer again. This gave a much better score than before; 200 out of 350 tracks had a tempo rate. Repeated this a second time which gave different results...

  • Zen Vision: M 30GB...proble

    I had just?installed my Zen Vision: M and everything was working as it should. I then attempted to transfer almost 900 songs. It was taking a long time, but it was working. But, then it just stopped transfering. A good 600 songs were successfully transfered over to my player. The Creative MediaSource organizer froze up. Then my computer froze up. I restarted my computer and tried to transfer the rest of the songs. It wouldn't work. My computer detected that my Zen Vision was plugged in, but when it came down to transfering songs over nothing would happen. I mean nothing!? My Creative MediaSource kept acting up and nothing would work anymore. So, I uninstalled everything. Then I re-installed it, thinking that it was the mediasource.
    Nothing works. I have been at this for over 6 hours...does anyone have any suggestions? Please?

    reset your player, format it etc.

  • ZEN VISION 30GB - Music Capacity Quest

    Re. http://www.creative.com/products/pro...4&product=2985?I would want to store as much music?as possible. Can I use the entire 30 GB for MP3 files or is the player partitioned for music, video, and pictures thus limiting the space that can be used for each file type. Thanks. AZ

    It is not seperated or partitioned for certain files, you can use the space whichever way you want, if you want to put only music on it, you can do that.
    Cat

  • Outside of Warranty Zen Xtra 30gb Power Jack probl

    Hello,
    I have had my Zen for over a year now, purchased in early last if memory serves, although this particular one is a replacement for a first unit that had headphone jack problems, and I have it since June of last year. For a few weeks my Zen has had problems recharging, only indicating that it is being powered up when the AC Adapter prong is pulled or pushed at a certain angle and held at that angle. At first I thought that it may be the actual cord that was causing the problem, since it was damaged from being chewed on my one of my family's cats, but it seems as though it may be an internal player problem. After trying the above mentioned method with no success yesterday I noticed that the small prong inside the player end of the power connection was bent or loose, and it will no longer indicate recieving a charge for more than a second.
    My question is can I still send it in (recieve an RMA and return to creative labs at a cost), or is there a Do it yourself solution? Recommendations for a third party repair solution?
    If necessary I can provide pics within the next couple of days, to help describe the problem.
    Thank you all for any help in advance

    If your handy with a soldering iron the Socket can be replaced although Creative wont recommend this.

  • Including Vision M in PC music libr

    Is there any way that I can consolidate the tracks on my Zen Vision M into the 'PC music library' WITHOUT the files being physically copied to my hard dri've. At the moment I have to access tracks by selecting the Music directory on the Zen Vision, and clicking through all the folders to play the files. As most of my music is stored on my vision m, it makes all the windows to the right pretty much redundant.
    I also have an iaudio attached to my computer most of the time, and would like to be able to search through that, the vision m and mp3s on my hard dri've all at once.
    Thanks

    Don't use the Generic one as it can damage the player, The cell phone one doesn't output enough juice for it.Can't say about the SanDisk one. The older the battery the less playtime it will output. Age of the battery has more to do with it than use of it. So the charger itself would be my guess. Get either the car charger that is made for the Playstation Portable (a real one) or the one Creative makes. http://www.walmart.com/catalog/produ...duct_id=396047

  • Zen Sleek Photo Transfer Probl

    For the past 2 weeks or so my Zen will not upload music files. The software does not recognize that it is connected at all. I tried uninstalling and reinstalling and also following the suggestions provided on the site. Is there anything else I can do?
    Also, another minor problem is that it does not display the name of the songs that are playing.. instead it says select music to play

    I hope you know that there is more than one Zen?
    How about picking from the list below - Forum members cannot read your mind!
    Creative "Zen" MP3 Models:
    Zen 2/4/8/6/32 GB (Flash)
    Zen Micro -HD
    Zen MicroPhoto -HD
    Zen Nano 52 MB
    Zen Nano Plus
    Zen Neeon 5GB/6GB
    Zen Sleek - HD
    Zen Sleek Photo
    Zen Stone - With built-in speaker
    Zen Stone Plus - With built-in speaker
    Zen Stone Plus 2/4 GB
    Zen Stone
    Zen Touch - HD
    Zen V
    Zen V Video
    Zen V Plus
    Zen Vision - HD 30 GB
    Zen Vision M - HD 30/60 GB
    Zen Vision W - HD
    Zen Wav
    Zen Xtra

  • Re: Zen M music albums, hel

    I have recently bought a Zen M Vision, and I'm just trying to put all my music on it.BlablaAnyway, the problem is, when I put 5 different albums (by the same band) on it, it doesn't show as 5 different albums, it puts all the songs into one album 'unkown'. And they are all mixed up so I can't play one album by itself without having to skip loads of tracks inbetween songs. I don't know if that makes sense, sorry! I am rubbish at explaining things :smileytongue:So if you understood that and can help me out and tell me how to get my songs into different albums then that's great!Thanks.

    Sounds like the "Album" field in the ID3 tag was filled in as Unknown. When you rip your music, you can use the online CDDB tool to get the information about the album (like the artist and track names), or you can fill it in manually. If you fill it in manually, don't forget to fill in the Album title aswell.
    Which application do you use to transfer your music to the player, and do you use that same application to rip your CDs?
    Cat

  • My new Vision:M stops transferring music after like 10 so

    Hello:
    I just received my Vision:M today and cannot transfer my music!
    After transferring like 0 songs my Vision:M seemingly stops taking additional data. The computer shows the moving folders, but the same song shows and the data transfer bar doesn't move. I eventually have to go into task manager and end task. This happens every time I try to transfer songs and it does not seem to get caught on the same song every time. I have tried reloading the software which came with the player to no avail. The computer I am using is brand new running WinXP. I do not have any other programs running at the same time. Anybody have any ideas before I return this thing and give up on Creative? Wow, my Iaudio X5 had no problems transferring music, but this thing is a mess! Any help would be greatly appreciated!
    John

    I had that same problem too at first. Are you connecting your zen vision: m to a usb port on your computer monitor or another prehipheral? I had connected my zen to a usb port on my monitor and it would freeze up just as you described, but when I connected it to a usb port on my computer it works great.
    Hope that helps

  • How many times can you format a zen xtra without causing proble

    I had many transfer problems due to id3 tagging done through ripping cds using windows media 9 before i got mediasource software.i found most of my problem were solved by formatting the zen which i did many times over past month until i got it right. I have over 0gs or music on computer thus no problem transferring it to zen after formats. I have had to reburn some cds to mediasource and may have to in future.could this formatting,retransferring of the zen hard dri've cause mechanical problems down the road if its done too many times?

    Nope, the hard dri've is designed to be used. Don't worry

  • How to make best videos/audios for Creative Zen/Zen Vision W/Zen Vision M/Z

    4Easysoft Creative Zen Video Converter is an all-in-one Video Converter for Creative Zen software with high output quality and powerful video editing functions, which can help all the zen users to make the best video/audio effect.
    First of all, let’s make clear what kinds of videos/audios can get the best effect in the zen players.
    Video:
    MPEG, WMV, and AVI (MPEG-4 SP, DivX, Xvid), while MPEG-1, and MPEG-2 are supported, but must be transcoded with the included software.
    Audio:
    MP3, AAC, WMA, WAV, and Audible 2, 3, and 4 formats.
    Settings:
    Video resolution: 320×240; Video Bitrate: 500 kbps; Audio Bitrate: between 96 to 128 kbps.
    Then, let me show you how to make a full use of this powerful converter.
    Preparation:Download and install 4Easysoft Creative Zen Video Converter
    http://www.4easysoft.com/guide/creative-zen-video-converter/main.jpg
    Step 1: Run this software and add video/audio files.
    Step 2: Select output video format from the profile drop-down list.
    Click the “Profile” button to select the output video format from the drop-down list button.
    Step 3: Customize output settings.
    Click “Settings” button in the output settings area, you are allowed to customize the output parameters, specify output folder and select output format.
    Step 4: Start conversion
    Click “Start” button on right bottom of the main interface, you can begin the conversion. All the tasks of conversion will be finished at fast speed and high output quality.
    http://www.4easysoft.com/guide/creative-zen-video-converter/steps.jpg
    Tips on editing videos:
    1: Capture your favorite picture.
    Just click the “Snapshot” button to save your favorite image.
    2: Merge videos into one file.
    Just check the “merge into one file” option if you want to merge the selected contents into one file As default the merged file is named after the first selected file (either a title or a chapter)
    3: Select preference
    Click the “Preference” button and a dialog pops up, you can select the output destination, the Snapshot foler, the format of the snapshot image. You can also choose to shut down your computer or do nothing after your conversion. You can also select the CPU usage.
    4: Trim video
    You can get any clip of your video and put it on your zen.
    5: Crop video
    You can crop your video by selecting your video mode, setting crop values, or drag the frame.
    http://www.4easysoft.com/guide/creative-zen-video-converter/tips.jpg
    Ok, just enjoy movies and music with your Creative Zen player now!
    More useful tools:
    MP4 Converter is a powerful MP4 Video Converter which is designed to convert almost any video formats to MPEG-4 standard formats; WMV Converter provides perfect solution to convert common video formats to WMV with the best quality of picture and sound; Apple TV Video Converter is the excellent Apple TV converter software to convert all video files such as AVI, MPEG, WMV, MP4, MOV, RM, ASF, 3GP, VOB, etc, to Apple TV movies.
    Edited by: user11254370 on 2009-6-9 下午11:58

    Just wanted to mention - I bought the IR Remote thinking to make the player useful without navigation keys. Now I feel like I wasted more money instead of shifting to some other player by some other company with better customer service.

Maybe you are looking for

  • How big effort it is to setup Change Request Management?

    We are interested in implementing Change Request Management into our Solution manager 7.0. What size of an effort in mandays it actually is and what kind of professional roles are required to set it up? Some background information for your responses:

  • How to make Outlook the default mail sender?

    I have a new MacBook Pro. I have installed Outlook and works great. But, when I am viewing a picture if I click on send new email it opens the Mail application and not the Outlook email. Is there a way around? Thanks.

  • Import List with History

    I have migrated sharepoint Custom List from a Sharepoint2010 server to other Sharepoint2010 server by the commands: export-spweb, import-spweb. 1) The data of the list is migrated fine but column with type "Person and group" gets empty. How to move t

  • About pre-defined function

    Respected sir, My name is kiran, I’m studying 3rd year B.Tech. Sir, I have written one predefined function in java which was not present yet. This function performs mathematical operation, calculating “DET” of given matrix of any order. Can this func

  • Where is layer locking stored in psd?

    i'm referring to to transparent pixel lock, image pixel lock and position lock. file formats pdf mentions the transparency protected flag at bit 0 in the layer records section - which sounds suspiciously similar, but none of the other locks are to be