Visiprise 4.2 Configuration for Label Printing using Loftware

Hi All,
I have configured all the needed stuffs in the SAP ME 4.2. My requirement is to generate the .PAS file in the Visiprise-Print-Files/Temp folder.
But instead i could generate the .DAT file inside the same folder. Have done all the configurations quite right and triggered the Assembly using Assembly Operator Dashboard(AOD) using the configured Operation and the SFC's. After doing all such stuffs i couldn't generate .PAS file. I am just wondering why it is not getting generated.
Can anyone guide me whether i am on right path or not?
Please let me know if anyone need anymore info reg this.
Thanks
Praveen

Let me kick in my $.02.
I'm guessing that IT doesn't have auto-discover turned on so you're fending for yourself. In my case, I tried copying the exchange 2007 settings from another mac user at work but they didn't work. I was trying to switch from the webmail settings to newer ones and the manual method of just trying to overwrite the old didn't work.
Then I used the wizard to create a new 2007 account and autodiscover kicked in and I'm connected. What's weird is that the server settings looked exactly like what I entered manually. Go figure.
Back to your question. Before I used auto-discover, I was using web mail server information and it worked. It only used the server info without http or https stuff. Using your example, i looked like webmail.xyz.com.
One more thought. I think you may get some help looking at any other mail client settings except outlook. If you can find someone at work using Thunderbird or Outlook Express, copying their working settings can't hurt. In my experience, the settings are often the same. YMMV.
Your vpn comment is interesting. Using the webmail settings, I had to use Cisco VPN when dialing in from home. At work, it wasn't necessary. My suggestion is to test your settings at work to eliminate the VPN as a factor.
I also found Applecare to offer decent help when I previously ran into exchange issues. But if I had a magic wand, I'd get the IT people to turn on auto-discover for you based on my experiences.
Good luck.

Similar Messages

Third party tool for label printing.

Hi,
Any body given me third party tool for label printing for different items
Regarding
anil

HI,
U can use <b>ZEBRA printer</b> , It is a thrid party tool for lable printing/

Label Printing Using Address Book - How can I Print multiple labels of the same name?

Label Printing Using Address Book - How can I Print multiple labels of the same name?

I used to be able to print multiple copies of the same picture on one page using iphoto. There was a customise button when you went through to print and it was there somewhere. I can't see it anymore - maybe since an upgrade.
It's gone. But as a work-around, duplicate your photo (⌘D) to create as many versions as you want copies and select all at once. Then use the "Custom" print layout and set the photo size you want.
After printing, trash the added versions.

Standard Smartform for label printing for packages - pls advice

Hi All,
I need help in changing a print program ie Standard Smartform for label printing for packages ?
Standard Driver program: SDPACKDR
Please provide me with the detailed steps for editing the Std Smartform according to any requirement.
Points will be rewarded promptly.
Thanks.

hi,
1. The smartform name is SD_PACK_ETIK.
2.Just copy the standard program into Zprogram and make chanes and assign in NACE with the form.
3.But,in smartform lable printing is not possible.
4.you can print barcodes.
Regards,
Kumar(Reward if helpful).

BarTender for Zebra Barcode Label printing using Smartform

HI Experts,
Does anyone know how to use BarTender 7.10 software to create barcode labels for Zebra printer?
I have to include a jpg Logo into the Label using BarTender.
But when I test using the Zebra printer - the logo/picture won't print out.
Any idea?
Thank You.
Best Regards,
CW

Hi There,
I had problems with using Bartender when I tried to print a logo onto my labels, but I contacted a [labelling company |www.iidsolutions.net] who specialise in barcode label printing and the bartender software, they sorted out my problem but then after a chat with them I decided it would be easier to get them to print the labels for me as I had loads of changes and they were quite cheap. See if they can help you. :~)
Good luck.
Dave.

How to set the BARCODE width and length for label printing..

Hi All,
How to set the Code 39 barcode label format in the sizxe of 0.20" * 1.4". By default while printing barcode size exceeds my current requirement. Please let me know to customize the size of barcode labels.
Thanks.

I don't know what you mean by "Code 39" because my Output Designer software doesn't offer that barcode (or do you mean "code 3 of 9?). In any case, are you trying to control the size of the text (which is what I think of when you refer to "label")? If you are, then just change the font & size. If you are wanting to modify the physical characteristics of the barcode itself (height & length for a certain number of characters) then you are probably out of luck. Or at least in for some trial & error.
There are a series of "barcode.xxx" files in the 'config' folder where Output Designer was installed to. These are text files that contain the physical characteristics of the various barcodes for various printers. The parameters that you would be interested in is the height and width of the bars (black & white). For example, a barcode might be defined as .400 high with narrow bars 3 "dots" wide, wide bars 9 "dots" wide and white space the same or different. Presumably changing these values would affect the generated barcode. For example, in this example the wide bars are 3 times the width of the narrow bars so I would assume that relationship would have to remain. To make the resulting barcode shorter you would then use 2 for the narrow and 6 for the wide.
You would have to make the change in the file(s) that would be used for your printer(s).
There are four width values for each of the parameters. Most of the barcodes only use 2 but some have 4. I'm assuming that when there are 4, like in "4 8 12 16", that the barcode definition has 4 different widths of bars and/or spaces.
There is no guarantee that the scanning hardware & software will "see" and interpret the resulting barcode correctly.

Fax configuration for PO printing...

hi,
how to configure the FAX for PO printing....plz suggest me the corresponding tcodes and how to proceed with...i am using ME9f for Po printing...
thanks
jaideep

In scot we are linking fax machine to sap.
In nace we are making setting for condition type as well as we can create condition record.
again u have to do configuration for output determination.
User parameter u have to check for use of fax machine.

Weblogic 10.3.4 as report printer for PDF printing using apex_fop.jsp

Hello,
Is it possible to use the apex_fop.jsp in combination with Oracle Weblogic 10.3.4 for PDF printing?
We have managed to get our Apex application to print PDF documents using Apache FOP with Oracle Weblogic 10.3.3 or Apache Tomcat 6 as a report printer.
But when we are trying the Oracle Weblogic 10.3.4 server as report printer, we will get the Error 500--Internal Server Error error in the pdf.
One of application server log shows the error "Expected Node-set in Path Expression".
Regards,
Mathieu Meeuwissen
Edited by: Meeuwtje on 17-jan-2012 17:00

Steve,
I am using JSF2.0 and getting javax.el.ExpressionFactory NoClassDefFound issues.
OEPE Helios
Weblogic 10.3.3
I have an EAR containing one WAR.
WEB-INF/lib
el-api-2.2jar
el-imp-2.2.jar
jsf-api.jar (2.1.1)
jsf.impl.jar (2.1.1)
jstl.jar (1.1.0-D13)
web.xml has
     <context-param>
          <param-name>com.sun.faces.expressionFactory</param-name>
          <param-value>com.sun.el.ExpressionFactoryImpl</param-value>
     </context-param>
EAR has
weblogic-application.xml with
<wls:prefer-application-packages>
<wls:package-name>org.eclipse.persistence.*</wls:package-name>
<wls:package-name>javax.faces.*</wls:package-name>
<wls:package-name>com.sun.faces.*</wls:package-name>
     <wls:package-name>com.sun.el.*</wls:package-name>
     <wls:package-name>javax.el.*</wls:package-name>
</wls:prefer-application-packages>
I see by your post that JSF2.0 support can be solved by either deploying a shared-library or using the weblogic.Deployer utility. Unfortunately, we don't have access to change the Weblogic instance in any way. I was hoping that using the prefer-application-packages would be sufficient to use alternative classes to Weblogic's but I have not been able to get it to work for the javax.el classes. I have tried not including javax.el and the app deploys but then accessing a page produces a javax.el.ELResolver no method found for invoke. Invoke being a newer method defined in el-api-2.2.jar. If I was able to convince them to add some shared libs, what are all the jars that would be required to make this work?
Any suggestions would be greatly appreciated.
Thanks
John

Configuration for po print out

hi experts,
pls advice me step by step procedure for the configuration to take the po print out.
i saw the first thread but i cant understand . pls help me.
regards
arun

Hi,
For PO print out follow the below steps;
A1. Define Number Range for Purchase Order
SPRO -> Material Management-> Purchasing -> Purchase Order -> Define Number range for Purchase Order
A 2. Define Document Types for Purchase Order
SPRO-> Material Management-> Purchasing -> Purchase Order -> Define Document Types for Purchase Order
Copy from Standard Purchase Order NB and rename to ZNB
Maintain Number Range In case of Internal Number Assignment & Number Range In case of External Number Assignment.
A.3. Define Screen layout at Document Level of Purchase Order
SPRO-> Material Management-> Purchasing -> Purchase Order -> Define Screen Layout at Document Level
Maintain Output of Purchase Order
1. Condition Table
SPRO  Material Management-> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
Ex:
EF---> ZNEU
Select ZNEU and double click on Mail title and texts and go to
EN- New Purchase Order Print Out,
Select ZNEU again and double click on Processing routines,
Select ZNEU again and double click on Partner Roles
4. Message Determination Schemas
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
ZNEU -> ZNB
Now you create PO(ME21N) and maintain the text and save it. Go to ME22N and print the PO by giving our output type ZNEU).
Hope the above will solve your problems. If helpful then reward.
Regards,
Biju K

I need to change the page setup to an unusual size for label printing

Hello. I'm trying to print a label that is 2" wide x 1-1/2 high. Firefox defaults to 8-1/2" x 11" or A4 page size and I've been unable to figure out how to change the default size to 2" x 1-1/2".
I've cleared all the margins to zero and removed all header and footer information. But how do I change the size to 2" wide x 1-1/2" high?
When I print, it will print the label correctly. However, it spits out 11" of labels instead of stopping at 1-1/2"
The printer is set up to accept the size (it's a Zebra label printer), but Firefox appears to be sending a page size that is different.
Any help here would be most appreciated.
Thank you

Thanks for your answer. Instead of formatting through FireFox, I had to go in and format it via the printer. Duh! Feel stupid not doing this first. If any one else has this problem, I was able to set it up on the printer by going to Printers > Printer Properties > Printer Preferences and set it up. Good luck and thank you for your reply.

OSM-1CHOC12/T1-SI configuration for all VC4 used

hello all,
Please can you share the right configuration for channalized STM4 card to benefit from all the 4 VC4 means 622 Mbps. below the information about the existing config:
controller SONET 9/1
framing sdh
au-4 1 pos
au-4 2 pos
au-4 3 pos
au-4 4 pos
interface POS9/1:1
ip address 10.123.123.2 255.255.255.252
no mls qos trust
interface POS9/1:2
no mls qos trust
interface POS9/1:3
no mls qos trust
interface POS9/1:4
no mls qos trust
the card si: 1-port CHOC-12/DS0 SI OSM-1CHOC12/T1-SI
I tried the multilink but no thing happen, the multilink was inactive.
please advise
regards,

This somehow got gabrbled on the way in - it should be:
We can see the digits coming into the router via debug voip vtsp all but cannot get them beyond - ccapi inout and debug voip dialpeer act as if nothing is passed in. The call is incoming from an Avaya PBX, the number being passed is 8986809. If I do a connection plar on the voice-port the call completes successfully.
From the configuartion guide:
Example: Gateway Configuration for Hookflash Relay
controller T1 2/0
framing esf
linecode b8zs
ds0-group 1 timeslots 1-24 type fxo-loop-startvoice-port 0/1/0:1
output attenuation 0
timing hookflash-out 600 */ Can be adjusted for the specific needs of PBX /*
dial-peer voice 11 pots
port 0/1/0:1
forward-digits all */ Necessary to forward DNIS to CVP for T1/CAS FXO /*

LABEL printing using Thermal printers during GR for a PO

Hi
Can you pl. let me know the steps involved to print a label on thermal printer
when GR is made against a PO.
appreciate if you can provide me with detailed steps
Thanks
Prasanna
Edited by: B.A.PRASANNA KUMAR on Oct 26, 2009 11:14 AM

Hi,
The steps are described in SAP Notes #135894 and #.
The main problem with label printers is that all these printers have their own unique printer languages which are not supported by the SAP system. So Note #183777 and #135894 describe a workaround.
All print data including all printer sequences are created by an external program and uploaded into the R/3 system. As per Note #183777, this is done with Intermec's design program LabelShop PRO.
You should use device type LB_INT to print the barcode labels. The SAP system only replaces the symbols and besides that it sends the print data to the printer which was uploaded.
So you need to design the label with LabelShop PRO or another third party program for Intermec label printers. You then need to upload the label file to a standard text in transaction SO10 as described in the Notes above.
Regards,
Aidan

Label-print using po qty-how to print using unit of measurement from po

I have a report that's using the po qty to determine the amount of lables to print.
However, this does not work for items when they are ordered by conversion factors other than 1. What I need help with it how to get my qty of my conversion to make it print the amount i need - some examples of orders
1- bx10 - (1 box of 10 per box) - need 10 tags(conversion is 10)
12- bags - work fine with this one - need 12 tags (conversion is 1 here)
3- bag100 (3 bags of 100 per bag) - this one i only need 3 tags(conversion is 100 but only need 2 tags because items are in a 3 bags rather then 300 individual item ( this might be a issue) This will print correctly but if a conversion is added that factors it in - i may get 300 labels which i dont need
as you can see i have different conversion for most every type of item I order.
This method seems to get close to what I need - as do other label reports I have- I thought I would feel this method out since the conversion problem seems a rather simple fix.
here is what I have for my sql query and then my select statement:
As stated I need somehow to have the conversion from the po added into the report to determine the amount of labels to print
max40385
SELECT "INVENTORY"."ITEMNUM", "INVENTORY"."ORDERUNIT",
"INVENTORY"."BINNUM", "INVENTORY"."MODELNUM",
"ITEM"."DESCRIPTION", "POLINE"."ITEMNUM",
"POLINE"."ENTERDATE", "POLINE"."PONUM", "POLINE"."ORDERQTY"
FROM "MAXIMO"."INVENTORY" "INVENTORY",
"MAXIMO"."POLINE" "POLINE", "MAXIMO"."ITEM" "ITEM"
WHERE ("INVENTORY"."ITEMNUM"="POLINE"."ITEMNUM") AND ("POLINE"."ITEMNUM"="ITEM"."ITEMNUM") AND
"POLINE"."PONUM"='24142' AND "POLINE"."ITEMNUM"='1201020021N'
EXTERNAL JOIN POLINE.ORDERQTY>={?C:\Documents and Settings\kpowell\My Documents\test table.xls: Sheet1_.Column1}
C:\Documents and Settings\kpowell\My Documents\test table.xls
SELECT `Sheet1_`.`Column1`
FROM `Sheet1$` `Sheet1_`
WHERE `Sheet1_`.`Column1`<={?max40385: POLINE.ORDERQTY}

Calculate the number of labels outside of CR

Label printing using Markpoint

Hi,
Has anybody worked with Markpoint MP 160 , MKII series printers & successfully integrated the same with SAP to print labels ? How to go about ? What should be the device type ?
This is a thermal printer & the stationery is the adhesive type.
Does printer port have any significance, normally printers are connected to LPT port but this printer is connected to COM2 port which is a serial port.
Regards,

Hi,
is you want to use Zebra-Printers you need to have a CUPS-Infrastructure (for BI Publisher Standalone), which converts your output to ZPL. To get Barcode output you need to register your barcode font on the server. Have a look at http://www.oracle.com/technology/products/xml-publisher/demoshelf/viewlets/TemplateBuilder-AddingExternalFonts.html to see how to add your Barcode-Font and use it.
Regards
Rainer

Color Management for Epson printer using Photoshop Elements 6

I have consistently dark prints when using my new Epson workhorse 1100. It prints fine from iPhoto but not from Photoshop Elements 6. The Epson people say it's an Adobe problem. The Adobe people won't help, as it's not under warranty. I am interested in settings in PSE6 or on my Mac OSX. Or, what's a profile and how do I set it? Thanks!!

Yes, I've tried all of the options: Printer manages color, PSE manages color. All are the same dark prints.
On another conversation on this forum, I read the following. Very discouraging to think that Adobe knows of this problem but won't give me any tech support because too much time has lapsed.
I don't know what "plugs" are--sounds like this user figured out a way around it.
Any advice?
Thanks!
Fran
Re: Color mismatch EpsonR800 and Elements 6
Adobe has admitted that there is a color management issue with PSE 6 for Mac. I have an Epson R1900 and I am now getting acceptable color-managed prints by allowing the Epson Printer driver to manage color management (ie; color management in PSE 6 turned off). The Epson Photoshop Plug In also works well with PSE6 and ICC profiles; however, I have yet to solve 2 problems with this particular plug in: (1) How to get the program to capture 3rd party ICC profiles and (2) how to print borderless prints. If anyone has seen a user guide for this particular plug in, I would be grateful to know how to download it.

Visiprise 4.2 Configuration for Label Printing using Loftware

Similar Messages

Maybe you are looking for