Visit Plans: link activity with visit plan

Hi Colleagues,
After generating activities using a visit plan, we cannot see any relation between the activities and visit plan that generated them. So we cannot check % of fullfilment of visit plan. In other words how many activities were closed by this visit plan. We cannot even relate these activities.
Any suggestion?
Regards,
Renato Petrulis

Hi Rene,
I undestand you that VP are just templates that we use in the activity scheduling to help masive activities creation.
I'm just looking if someone had found a way to relate all activities generated in same run.
Our customer wants to control the fulfillment of planed activities in a particular route a sales rep is assigned to.
Based on this requirement I wanted to have any "mark" to gather all activities created in the activity scheduling based on a particular route, so I could see % of conclusion of these activities generated.
When you generate activities using scheduling, its descriptions records customer name and directions. If there was any BadI in this process I could manipulate this field or any other to be able to relate all activities generated in same run.
Thanks anyway.
Regards.

Similar Messages

  • Can I use my At&t Samsung Galaxy S4 Active with a Verizon Prepaid Plan?

    Can I use my At&t Samsung Galaxy S4 Active with a Verizon Prepaid Plan?

        Sumsumone,
    We're glad to hear that you're considering our Verizon Wireless Prepaid services.  You're current Samsung device will not work properly on our network.  However, we do offer a trade in program in which you can earn money towards a new Verizon Wireless device.  You can check out here; www.trade-in.vzw.com.  Our sales experts are here to assist in setting you up when you're ready; 888-924-7937.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • I have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os)

    i have samsung corby gts3653 mobile and need to connect internet to mac through it but it doesn't have wifi and pcsuite for mac and how could i able to connect it, through gprs? GPRS is active in mobile but unable to link it with macbook pro(using lion os) can any one reply.

    Until the MacBook Air was released and supported in 10.5, the Mac did not consider USB to be a valid Networking Protocol. So set the Mac with USB solutions aside.
    To connect computer-to-computer, you typically need to be using an Ethernet crossover cable. Assigning the same address to two Ethernet devices is never the solution -- it gives a Network Conflict, just as you said.
    If your Windows box has some mechanism for Sharing its WiFi connection over Ethernet, you would have to follow its rules. Whether that means Manually assigning an Ethernet Address in the same range or the PC will provide the Address, I do not know.
    Best success may be running an Ethernet cable to your Wired/Wireless Base Station, or using a "gaming adapter" (Ethernet-to-Wireless no drivers required) connected to the Mac's Ethernet port to give it WiFi access. What is your Base Station {Cable, DSL, FIOS, Other} ? Ethernet cables can be up to 100 meters (an American Football Field). Often the Base Station can be moved closer for more convenience.

  • Content of add-ons, except Weatherbug, periodically requiring deletion of all cookies, restart of compute and re-sign in to Google and YahooMail; the links associated with the add-on remain active

    The content of my add-ons, except Weatherbug, periodically disappear. I have to delete all cookies, restart compute and re-sign-in to Google and YahooMail. Everything is fine for a while and then the content of the add-ons goes away again. The links associated with the add-on remains at the top of the now content-vacant boxes and still work. This problem appears to have cropped-up after the last Firefox update.

    To: David Messner,
    As we cannot login we cannot raise a ticket with billing or anything else for azure.
    Have two valid azure subscriptions, one microsoft account (ex-liveid/ex-officelive) and an organisation account (err microsoft office365).
    Cannot access the azure portal!
    Please raise a ticket for my as it is impossible for me to do so, the system is broken, the website workflow is flawed.
    Dave
    ps: cleared cache several times, IE11, does not work from Win 8.1, 8.0 or 7. It is broken totally.
    The only possible advised support is "
    United Kingdom   
            +44   
            (0)844 800 2400
    and believe my that is not a real option. The two times in the past I phoned in I got absolutely nowhere after weeks and the communication just died. Yes, it is that bad.
    Dave Baker | AIDE for LightSwitch | Xpert360 blog | twitter : @xpert360 | Xpert360 website | Opinions are my own. For better forums, remember to mark posts as helpful/answer.

  • How to make an hypertext link workable with adobe reader for IOS ?

    Hello,
    Hypertext links in a PDF file work perfectly well on Mac OS (Yosemite).
    The same document on an IPAD with IOS is not able to open an hypertext link ...
    How could I do to solve this problem ?
    An author who want to publish electronic books with hypertext links on mobile devices

    Hello Steve,
    All my best wishes for the new year.
    To answer your question :
    . I am writing books on my IMAC with Yosemite  (10.10.1) using Word (14.4.7)
    of  OFFICE MAC.
    . I can open Hyperlink connection by clicking on the link
            . I save the document in a .PDF format
    . This document is sent to my IPAD with IOS 8.1.2
    . In this .PDF document I am no more able to open hyperlink connection
    Please see attached an abstract of my book.
    Thanks a lot for your help and advices.
    Michel Poncet
    Tel: +33 4 76 89 50 82
    http://www.amazon.fr/Glariand-Copent/e/B007NXP7FU
    De :  Steve Werner <[email protected]>
    Répondre à : 
    <[email protected]>
    Date :  vendredi 2 janvier 2015 03:34
    À :  Michel Poncet <[email protected]>
    Objet :   How to make an hypertext link workable with
    adobe reader for IOS ?
    How to make an hypertext link workable with adobe reader for IOS ?
    created by Steve Werner <https://forums.adobe.com/people/Steve+Werner>  in
    Adobe Reader for iOS - View the full discussion
    <https://forums.adobe.com/message/7058559#7058559>
    Hyperlinks can be of several types. What are you linking to? Exactly what
    application did you test the hyperlinks with on the Mac? What application
    did you use to create the hyperlinks?
    If the reply above answers your question, please take a moment to mark this
    answer as correct by visiting:
    https://forums.adobe.com/message/7058559#7058559 and clicking ŒCorrect¹
    below the answer Replies to this message go to everyone subscribed to this
    thread, not directly to the person who posted the message. To post a reply,
    either reply to this email or visit the message page:
    Please note that the Adobe
    Forums do not accept email attachments. If you want to embed an image in
    your message please visit the thread in the forum and click the camera icon:
    https://forums.adobe.com/message/7058559#7058559 To unsubscribe from this
    thread, please visit the message page at
    , click "Following" at the
    top right, & "Stop Following" Start a new discussion in Adobe Reader for iOS
    by email
    <mailto:[email protected]eso
    ftware.com>  or at Adobe Community
    <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=
    14&container=4631>  For more information about maintaining your forum email
    notifications please go to https://forums.adobe.com/thread/1516624.

  • Is AppleCare (Education) can be activated with normal purchased macbook?

    Hi,
    I bought my macbook pro retina 15" about 11 months ago (as normal customer) and I want to activate AppleCare for it.
    Few hours ago, I purchased AppleCare Protection Plan, but as now I am a student in sweden, I purchased it as educational product. Later on, I heard from someone that it can't be activated with my macbook pro because when I bought it it wasn't as educational product and this AppleCare Protection Plan is for education macbook pro !
    is it true, if so can I return it? I have purchased it today afternoon swedish time.
    Thanks

    We are users like yourself, not Apple employees.
    You will need to find a contact here, Khaled
    http://www.apple.com/se/contact/
    For example, here
    Handla för utbildningssektorn
    Om du är student eller lärare ska du besöka sidan om Apple Store for Education eller ringa vår kundtjänst på telefonnummer 020‑120 99 71. Du kan ringa måndag-fredag 09.00 - 19.00.

  • SAP Message No-KL 294 Network Activity with invalid Internal Number

    Hi,
    I am getting System Error:NETWORK ACTIVITY WITH INVALID INTERNAL NUMBER" while doing MIGO.
    I have checked network activity assigned to PO is exist but this shows some internal Number "Plan no.f.oper." which does not exist.
    Please let me know how should i solve this error.
    thanks
    Sunil

    Hi Sunil.
    Did you get any response from SAP?
    I have as similar or maybe the same problem.
    And I found out:
    When I create the purchase request out of the Project-Builder (CJ20n) - SAP seems to lose the entry of the field 'AUFPL' in the table 'EBKN'.
    In these rare cases (this problem is only in about 2-3 % of our purchase requests) the network elements still exist - so they are not deleted or something like that.
    I created a routine, in which I read the entry of 'AUFPL' with the corresponding network number out of table 'EBKN' as key, to correct these wrong purchase requests.
    But I didn't find the reason for the problem, yet.
    Every advice would be great,.
    Best regards,
    Marc

  • If imessage is not activated with my phone number, does text messages can be forwarded to my ipad?

    my imessage is not activating with my mobile number, i do not receive code for text forwarding in my ipad/ air 2, my iphone 4s and ipad is operating with the same iOS. plz help i am being able to use call and messages forwarding facilities.

    Hi, uttam_june15.  
    Thank you for visiting Apple Support Communities.  
    I am not sure if you are unable to activate iMessage or that your phone number is not registering with iMessage.  However, here are the troubleshooting articles that cover both scenarios.  
    If you get an error when trying to activate iMessage or FaceTime
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    -Jason H.  

  • InDesign 5.0 tools/panels not activated with mouseover/mouseclick

    The following summarizes the hardware, software, procedures and results in my attempt to resolve issues with InDesign 5.0. Suggestions would be appreciated. Thanks!
    System:
    HP EliteBook 8540W
    Intel Core i7 CPU  Q820 @ 1.73GHz 1.73 GHz
    8 GB
    64-bit Operating System
    Pen Input Available
    Wacom Intuos4 pen and mouse
    Adobe Products:
    Adobe Creative Suite 5 Master Collection, Version 5.0
    Acrobat 9.4.6
    Procedure:
    The computer system control panel > program uninstall was used to clear all Adobe products except Acrobat, AIR, Flash Player and Media Player. The Adobe CS5 Cleaner Tool for Windows was installed and run at Clean All to remove all products and installer-related files for the Creative Suite 5.0.
    The Creative Suite 5.0 was re-installed on the HP cpu using the registered program discs.
    The Adobe 7_0_4 InDesign Patch-All was downloaded from Adobe and installed.
    Result:
    Tools Panel: Selection Tool and Direct Selection Tool will not highlight with mouseover nor activate with mouseclick.
    Layers Panel: Can't click-on Layer Name to activate that Layer; individual Layer Names can't be double-clicked to rename; visability can't be toggled with mouseclick; the Create New Layer icon at bottom of panel can't be activated with a mouseclick; a New Layer can be created from the Panel upper dropdown menu; Panels location can be moved, panels opened/closed, and collapsed with mouseclick.
    Character Panel: None of the Character styling dropdowns within the panel can be activated; Character styling options can be activated from the upper right panel options triangle dropdown, and they can be activated from the Application Bar: Type > Font and Type > Size. In the Type > Font flyout panel displaying all fonts, the mouse wheel will not scroll through the fonts.
    Paragraph Panel: Can't click on paragraph alignment option icons.
    Links Panel: In Pre-flight, can't activate link list item with mouseclick.
    Stroke/Color/Swatch Panels: Can't activate any tools within these panels with mouse.                             

    Peter,
    Thank you very much. I re-set DPI to default, rebooted, and the issues I was experiencing with InDesign were gone.
    Brad

  • Extending TaskOutput for a Human Activity with WebDynpro UI

    Dear Experts,
    For my process I need to change some data object values in my context using WebDynpro UI. For that I would typically use a Human Activit with WebDynpro and some output mappings on
    TaskOutput->UIResponse->MyTaskCompleteEvent->xxx.
    But in my case I don't want to close the task. I want to use a different Event for the mapping without completing the task. Something like:
    TaskOutput->UIResponse->MyTaskChangeContextEvent->xxx
    But I couldn't find a way to extend the TaskOutput and UIResponse to be able to use other custom events for output mapping.
    I would appreciate any help.
    Thanks,
    Koray
    Edited by: korayyersel on Aug 19, 2011 9:49 AM

    Ok, you can not update the BPM context without completing the task. You can have temporary data store in CAF (with default data source or external data source) and you can store/retrieve the data temporarily using JPA (Java Persistence API).
    You can refer the below link for more details: http://help.sap.com/saphelp_nwce72/helpdata/en/47/d67d5357a34ac5e10000000a42189d/content.htm
    http://help.sap.com/saphelp_nwce72/helpdata/en/4a/9e7b9845816c3de10000000a42189c/content.htm
    So you can call EJB/Web Service from WD task to save the changes and when user reopens the task you can retrieve the data from DB and show to it to the user.
    Thanks
    Abhilash

  • I want to bring in text from Word (and the web) that is already hyperlinked into InDesign. How do I do it while keeping the links active?

    I want to bring in text from Word (and the web) that is already hyperlinked into InDesign. How do I do it while keeping the links active?
    Whenever I copy/paste from web or Word it removes the hyperlinks.  And when I try to do it by "Place"ing a Word document into my InDesign project it keeps the formatting with it, the rectangles around the text.
    I have the latest version of InDesign.
    Any help is appreciated. 

    Copy-and-paste may not include formatting. A regular import using Place is the best way.
    The rectangles around the hyperlinks are just to indicate they are links -- they do not print, but they do show up in your PDF.
    You can remove them by double-clicking the hyperlink in the Hyperlinks panel and select "Invisible Rectangle" as type.
    Typically, Word hyperlinks are formatted -- blue text, underline -- with a Character Style. If you want to remove or change the formatting, all you have to do is change the character style. My experience, though, is you must check all hyperlinks because for no apparent reason sometimes they appear in the document without the character style.

  • Trying to paste pdf into mail and keep links active

    I've created a pdf in iWork with active links. When I copy and paste it into Mail the links stop working. Anyone know how to keep the links active?
    iMac   Mac OS X (10.4.6)  

    You attach pdfs to email. I have never met a pdf reader that works inside a mail client.
    Links, inactive or not, are a separate problem. Under what circumstances do they not work for you?

  • Parents iphone and my iphone activated with same email, now parents gets my text messages from freinds?

    Hi my parents iphone(4s) and my iphone(5c) were activated with the same email now when I get a text message(imessage) from a friend they also receive the message my friend sent, so how would I turn this off on their phone; because I dont want them to read what my friend is sending me?

    Hi cloudhalo,
    Based on your description that both phones are receiving each other's messages, you may need to make sure that the phone numbers aren't both linked to the same Apple ID, and/or adjust which addresses the phones are set to send and receive messages from. You may find the information outlined in the following article helpful:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
    Regards,
    - Brenden

  • I need a field like "System.RelatedLinkCount" but where the count is linked items with a field in a certain state

    I need a field like "System.RelatedLinkCount" but where the count is linked items with a field in a certain state.
    e.g. I've got a WI with a field on it that tells me how many active bugs are linked to it. (I'm not actually counting active bugs, but hopefully you get the idea). 
    The only way I can think to do this is with a TFS plugin and catching the workitemchanged event. I'd prefer to do this entirely in the WI if possible? is there a way to do this? Thanks

    Hi TimB33, 
    Thanks for your post.
    As far as I know there’s no default WI rule support to get the specific WIT linked count, I think you need to create your custom work item control to achieve that if you want this field.
    For this scenario, please submit it to User Voice site at: http://visualstudio.uservoice.com/forums/121579-visual-studio. Microsoft engineers will evaluate them
    seriously.  
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Record is not displayed in Historical Reports-Activity with no Customer

    Hi All,
    We have an issue in Historical Reports for Activity.we are using Book of Business also.
    Now the issue is under Activity History as subject area, when an activity doesn't have any Customer it should come as Unspecified in the report.
    Like if it doesn't have account assosiated to it then it is shown as Unspecified in the report.
    But for activity with no customer assosiated to it, it is not showing the entire record (Acitivity) in the report.
    When the Customer field is removed from the displayed columns then we are able to see those activities in the report.
    Note:
    But when the Book of Business is not there previously, it was working fine
    An response is appreciated.
    Thanks & Regards,
    Lemu
    Edited by: Lemu on Dec 28, 2010 10:33 PM
    Edited by: Lemu on Dec 28, 2010 10:34 PM

    Hi,
    Yes we have a workaround for this.
    Since the Primary Customer is not exposed as an Activity filed.
    Copy the value of the Primary Customer and display it in a filed of activity using workflows.
    Then replace the customer filed with this filed.
    Then u will get the activity without customer also cause the customer filed is a normal activity field.
    Hope this helps.
    Regards
    Lemu

Maybe you are looking for