VISTA & 10g Database Configuration Assistant

Trying to run the 10g Database Configuration Assistant. I'm using Vista.
It just never appears. No welcome screen, no anything.
I looked at the firewall but it did not show up. I also turned off Norton firewall temp to try it. Nothing.
Under task manager is shows a process. But no screen anywhere. ?

Vista is junk ... that said it is still possible to install Oracle on Vista if it is the appropriate version of Vista. Be very specific about edition and full version number.
I'd recommend formatting the hard disk and getting a real operating system. That is most often the best solution.

Similar Messages

10g installation stays at 45% during Database Configuration Assistant

Hi,
I am trying to install Oracle 10g in my windows XP machine.Installation goes on smoothly and the configuration assistant window appears.The Database Configuration Assistant page showing the progess bar for database creation also appears.The progress shows Clone database creation in progress at 45%. It has been running for more than 6 hours.
What should i do? Can i stop and run Database Configuration Assistant independently? Is installation of all oracle database component complete?
Please advice.
Regards,
Jay

Hi,
I have checked and the Oracle listener is started.The problem is still there.
Where do i locate the files created during DBCA process? If there are any files left will they be replaced when i run DBCA independently?
Please advice.
Thanks.
Jay

Problem using template in database configuration assistant Oracle 10g

Hi,
I created a database using the database configuration assistant for Oracle 10g on a Windows Server 2003 box. The database I created worked perfectly, and I had saved it as a template so I could save some time when creating similar databases (which I have to do on occasion)
When I try to use the template though, I get an error (at about 4% through the database creation) saying:
ORA-01501: CREATE DATABASE failed
ORA-09314: sltln: error translating logical name
I'm creating this new database on the same server as the one I created my previous database on and NOTHING has changed on it, I did this just minutes apart and can duplicate it at will (just try and use a template)
Heres the template file contents (KM1.dbt)
<DatabaseTemplate name="KM1" description="" version="10.1.0.2.0">
<CommonAttributes>
<option name="ISEARCH" value="false"/>
<option name="OMS" value="false"/>
<option name="JSERVER" value="false"/>
<option name="SPATIAL" value="false"/>
<option name="ODM" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="IMEDIA" value="false"/>
<option name="XDB_PROTOCOLS" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="ORACLE_TEXT" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="SAMPLE_SCHEMA" value="false"/>
<option name="CWMLITE" value="false">
<tablespace id="SYSAUX"/>
</option>
<option name="EM_REPOSITORY" value="true">
<tablespace id="SYSAUX"/>
</option>
</CommonAttributes>
<Variables/>
<CustomScripts Execute="false"/>
<InitParamAttributes>
<InitParams>
<initParam name="O7_DICTIONARY_ACCESSIBILITY" value="TRUE"/>
<initParam name="background_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\bdump"/>
<initParam name="compatible" value="10.1.0.2.0"/>
<initParam name="core_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\cdump"/>
<initParam name="db_block_size" value="8" unit="KB"/>
<initParam name="db_cache_size" value="24" unit="MB"/>
<initParam name="db_create_file_dest" value="E:\oradata"/>
<initParam name="db_create_online_log_dest_1" value="C:\Oradata"/>
<initParam name="db_create_online_log_dest_2" value="D:\Oradata"/>
<initParam name="db_create_online_log_dest_3" value="E:\Oradata"/>
<initParam name="db_domain" value="JACOBSONCO.COM"/>
<initParam name="db_file_multiblock_read_count" value="16"/>
<initParam name="db_name" value="UDC7"/>
<initParam name="db_recovery_file_dest" value="E:\UDC7\flash_recovery_area"/>
<initParam name="db_recovery_file_dest_size" value="2048" unit="MB"/>
<initParam name="java_pool_size" value="0" unit="MB"/>
<initParam name="job_queue_processes" value="10"/>
<initParam name="large_pool_size" value="8" unit="MB"/>
<initParam name="open_cursors" value="1000"/>
<initParam name="pga_aggregate_target" value="24" unit="MB"/>
<initParam name="processes" value="150"/>
<initParam name="remote_login_passwordfile" value="EXCLUSIVE"/>
<initParam name="shared_pool_size" value="80" unit="MB"/>
<initParam name="sort_area_size" value="65536"/>
<initParam name="undo_management" value="AUTO"/>
<initParam name="undo_tablespace" value="UNDOTBS1"/>
<initParam name="user_dump_dest" value="{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\udump"/>
</InitParams>
<MiscParams>
<databaseType>MULTIPURPOSE</databaseType>
<maxUserConn>20</maxUserConn>
<percentageMemTOSGA>40</percentageMemTOSGA>
<customSGA>true</customSGA>
<characterSet>WE8MSWIN1252</characterSet>
<nationalCharacterSet>AL16UTF16</nationalCharacterSet>
<archiveLogMode>false</archiveLogMode>
<initParamFileName>{ORACLE_BASE}\admin\{DB_UNIQUE_NAME}\pfile\init.ora</initParamFileName>
</MiscParams>
<SPfile useSPFile="true">{ORACLE_HOME}\database\spfile{SID}.ora</SPfile>
</InitParamAttributes>
<StorageAttributes>
<ControlfileAttributes id="Controlfile">
<maxDatafiles>100</maxDatafiles>
<maxLogfiles>16</maxLogfiles>
<maxLogMembers>3</maxLogMembers>
<maxLogHistory>1</maxLogHistory>
<maxInstances>8</maxInstances>
<image name="<OMF_CONTROL_0>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_1>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
<image name="<OMF_CONTROL_2>" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</ControlfileAttributes>
<DatafileAttributes id="<OMF_SNIKEB_DATAFILE_0>">
<tablespace>SNIKEB</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>false</reuse>
<autoExtend>false</autoExtend>
<increment unit="KB">-2</increment>
<maxSize unit="KB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<tablespace>SYSAUX</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">120</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<tablespace>SYSTEM</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">300</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">10240</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<tablespace>TEMP</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">20</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">640</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<tablespace>UNDOTBS1</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">200</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">5120</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<DatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<tablespace>USER_DATA</tablespace>
<temporary>false</temporary>
<online>true</online>
<status>0</status>
<size unit="MB">5</size>
<reuse>true</reuse>
<autoExtend>true</autoExtend>
<increment unit="KB">1280</increment>
<maxSize unit="MB">-1</maxSize>
</DatafileAttributes>
<TablespaceAttributes id="SNIKEB">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">-1</initSize>
<increment unit="KB">-1</increment>
<incrementPercent>-1</incrementPercent>
<minExtends>-1</minExtends>
<maxExtends>-2</maxExtends>
<minExtendsSize unit="KB">-1</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SNIKEB_DATAFILE_0>">
<id>1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSAUX">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSAUX_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="SYSTEM">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>3</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>50</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>-1</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_SYSTEM_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="TEMP">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>true</temporary>
<defaultTemp>true</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">64</initSize>
<increment unit="KB">64</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>0</maxExtends>
<minExtendsSize unit="KB">64</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_TEMP_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="UNDOTBS1">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>true</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">512</initSize>
<increment unit="KB">512</increment>
<incrementPercent>50</incrementPercent>
<minExtends>8</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">512</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_UNDOTBS1_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<TablespaceAttributes id="USER_DATA">
<online>true</online>
<offlineMode>1</offlineMode>
<readOnly>false</readOnly>
<temporary>false</temporary>
<defaultTemp>false</defaultTemp>
<undo>false</undo>
<local>true</local>
<blockSize>-1</blockSize>
<allocation>1</allocation>
<uniAllocSize unit="KB">-1</uniAllocSize>
<initSize unit="KB">128</initSize>
<increment unit="KB">128</increment>
<incrementPercent>0</incrementPercent>
<minExtends>1</minExtends>
<maxExtends>4096</maxExtends>
<minExtendsSize unit="KB">128</minExtendsSize>
<logging>true</logging>
<recoverable>false</recoverable>
<maxFreeSpace>0</maxFreeSpace>
<autoSegmentMgmt>true</autoSegmentMgmt>
<datafilesList>
<TablespaceDatafileAttributes id="<OMF_USERS_DATAFILE_0>">
<id>-1</id>
</TablespaceDatafileAttributes>
</datafilesList>
</TablespaceAttributes>
<RedoLogGroupAttributes id="1">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_1_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="2">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_2_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
<RedoLogGroupAttributes id="3">
<reuse>false</reuse>
<fileSize unit="KB">10240</fileSize>
<Thread>1</Thread>
<member ordinal="0" memberName="OMF_3_REDOLOG_MEMBER_0" filepath="{ORACLE_BASE}\oradata\{DB_UNIQUE_NAME}\"/>
</RedoLogGroupAttributes>
</StorageAttributes>
</DatabaseTemplate>
can anyone explain why I keep getting this error?
Thanks

Error:     ORA-9314
Text:     sltln: error translating logical name
Cause:     Internal buffer may have overflowed
Action:     See OSD error accompanying this message
Check alertlog and trace files.
Message was edited by:
FeNiCrC_Neil

Database configuration Assistant

Hii,
I successfully installed my Oracle 10g in my Windows vista Business . So while creating the global database by Database configuration Assistant i got error 12560: TSN Protocol Adapter Error. i checked my ORACLE_HOME as well as ORACLE_SID paths.. but still now i unable to create my global database .. plz help me..
Thanx....

Pl do not post duplicate threads - 12560 ORA TNS Protocol adapter Error

Oracle 11g Database Configuration Assistant Hangs At 45% During 1st Install

Platform: Windows Vista 64 Bit Version
Downloaded: Oracle 11g Database 64 Bit
Service Pack 1
Greetings to all my Oracle Seniors. I have been attempting in vain to install the Oracle 11g database software package fully. I was able to complete the initial installation and made it to the second recommended action which was the Database Configuration Assistant operation. After 3 attempts, the progress bar stalled at 45%. I tried to look at the log file cfgtoologs (cloneDBCreation, and CloneRmanRestore), but it said that I didn't have permission. My pre-check cleared OK on everything. So, please direct me as to how to correct this issue.
Thanks
Preston
System Integrator

Well, that is not much of an option right now. I discovered that I have to reinstall the XP Pro OS after attempting the 11g installation 4 times and the install always stalled at 69% during the initial installation. I did have Windows Service Pack 3 installed on the system. I down graded and added 1 G of additional memory and checked the pre-check with no problem. But, the install continued to stall at 69%. So, and, yet, here we are.
Now in regards to the metalink notes, I am new to the forum, so I don't know my way around quite yet. Isn't the metalink the paid suppport option? If so, I don't have that access.

Oracle 9i database configuration assistant cannot be launched

After install 10g ODP.net and Oracle Developer Tools for Visual Studio .NET with ODAC components, the Oracle 9i database configuration assistant program cannot be launched.

Never had this problem before, but this is usually becos of jre version incompatibility. Changing CLASSPATH env might help.

Oracle 11g "Oracle Database Configuration Assistant" failed

Hi
am trying to install oracle 10g databse .
am getting Configuration assistant "Oracle Database Configuration Assistant" failed
in log file i see
[Thread-19] [18:32:29:343] [BasicStep.execute:202] Executing Step : CLONE_DB_CREATION_RMAN_RESTORE
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01092
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-01034
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-03114
[Thread-19] [18:32:29:343] [StepErrorHandler.setFatalErrors:322] setting Fatal Error: ORA-12560
[Thread-19] [18:32:29:343] [StepErrorHandler.setIgnorableErrors:250] setting Ignorable Error: ORA-01109
i have created microsoft loop back adapator and configured TCP/IP.
what would be the problem?

At the Oracle Support site https://support.oracle.com
To access the document, you will need a valid CSI (Customer Support Identifier), which is given when you purchase a support contract from Oracle.
If you do not have a CSI, I would recommend that you completely uninstall the product and reinstall again by following the Install Guide at http://www.oracle.com/pls/db102/portal.portal_db?selected=11
HTH
Srini

Oracle Database Configuration Assistant on Oracle Express Edition

I've just installed Oracle 10.2 Express Edition on a Windows XP Professional SP2.
Can anybody please tell me if it is possible to install the Database Configuration Assistant and how to do this? I just found some references about installing ODCA using oracle installer, however this is not available with the Express Edition
thanks
Pietro

DBCA is used to create new databases under the software of an existing home, or to add and remove features with a database.
Oracle Database 10g Express Edition software does not permit multiple databases (it only allows SID XE) nor does it permit adding or removing features. SO DBCA is not useful, not required - or included - with XE.
What are you trying to accomplish? (Multiple databases ALA SQL Server sense are done by separate Schema's in Oracle)

Configuration assistant "Oracle Database Configuration Assistant" failed

I install oracle 10g on HP UX 11.23. I got this error :
hecking for PHSS_33278; found Not found.     Failed <<<<
Checking for PHSS_33279; found Not found.     Failed <<<<
Checking for PHSS_33277; found Not found.     Failed <<<<
Checking for PHSS_33279; found Not found.     Failed <<<<
, my first question :
can i pass this step, ?
after all, my installation form is okey, but everything change become nightmare.
I installation failed on Configuration Assistant :
Configuration assistant "Oracle Database Configuration Assistant" failed
OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.
1. check the details panel on the configuration assistant screen to see the error resulting in the failures
2. fix the errors causing these failures
3. select the failed assistants and click the retry button to retry the
Configuration assistant "Oracle Database Configuration Assistant" failed
The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------

But i still get this error. Do you have solution for this ?
I installation failed on Configuration Assistant :+
Configuration assistant "Oracle Database Configuration Assistant" failed+
OUI-25031:some of the configureation assistants failed. it is strongly recommended that you retry configuration assistants at this time. not successfully running any "recommended" assistants means your system will not be correctly configured.+
*1. check the details panel on the configuration assistant screen to see the error resulting in the failures*
*2. fix the errors causing these failures*
*3. select the failed assistants and click the retry button to retry the*
Configuration assistant "Oracle Database Configuration Assistant" failed The "/oracle/OraHome_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------+
Edited by: user9198604 on Feb 25, 2010 3:37 AM

Changing Language for the Database Configuration Assistant, Net Manager,etc

Help! I've downloaded and installed Oracle 10g successfully. To my dismay, the Database Configuration Assistant, Net Manager, Net Configuration Assistant display German when I click on them instead of English. All my other documentation is perfectly in English!
BR,
==ManP

Did you ever get this resolved? I am having the same problem except with Chinese, not German

Unable to launch the Database Configuration Assistant

I have installed Oracle 10g Database Release 1 and I cant launch the Database Configuration Assistant (DBCA). The file c:\oracle\product\10.1.0\Db_1\bin\launch.exe does not exist on my computer.
My intent is to design a simple database in Oracle for an organization that uses Oracle extensively. I am running WinXP professional on my home computer. WinXP includes Microsoft IIS and I regularly test web-packaged files on this intranet server using the domain localhost. I downloaded Oracle 10g and installed it to the c:\ drive following the instructions in Chapter 2 of the tutorial Oracle 2-day DBA Course. I selected basic installation and standard edition.
I note that in the tutorial, the Oracle Home path has forward slants. The summary page of the Oracle installation wizard shows my installation with back slants. Do I need to install Oracle 10g to one of the directories in Microsoft IIS?
Nicholas

Install the Oracle database with the procedure in
http://www.oracle.com/technology/obe/2day_dba/install/install.htm
When you select the Install button, the Oracle universal installer displays the installation of the Database Configuration Assistant.
Uninstall the previous installation. To uninstall database 10g
1. Stop the oracle services Adminstrative Tools>Services.
2. Uninstall the installed products in Oracle Universal Installer.
3. In the Run field specify
Regedt32
In the Registry Editor select
SYSTEM>Current Control Set>Services
Remove the oracle services.
4. Restart and dlete the directories in the oracle installation directory.

Install error - database configuration assistant

HI. During install a 10g oracle database, the universal installer prompt me that one of required component , DATABASE CONFIGURATION ASSISTANT, is not properly installed. The first warning has been submitted with popup that reported " ORA - 22288 , file or LOB operation filed ......
My current OS is Windows 2000 Advanced Server SP4.
Please , help me.
Tanks!

HI, tanks for your interest!
I have tried to retry the "reccomended" component installation ( dabase configuration assistant) but the result have been the same!
follow an extract of log file...
Il listener è stato avviato alla porta:1521
Avvio listener di Oracle Net:
Controllo del listener in esecuzione:
F:\oracle\product\10.2.0\db_1\bin\lsnrctl start LISTENER
Controllo del listener completato.
Avvio del listener non riuscito. Il listener può essere già in esecuzione.
Configurazione del listener completata.
Configurazione della denominazione locale predefinita completata.
Configurazione di Oracle Net Services completata. Il codice di uscita è 0
INFO: Configuration assistant "Oracle Net Configuration Assistant" succeeded
INFO: Command = C:\WINNT\system32\cmd /c call F:\oracle\product\10.2.0\db_1/bin/dbca.bat -progress_only -createDatabase -templateName General_Purpose.dbc -gdbName orcl -sid orcl -sysPassword 05837d92bc1e15c52e043487527ddab44d -systemPassword 05837d92bc1e15c52e043487527ddab44d -sysmanPassword 05f5436fbcdeda00ccb795c17e87b43fae -dbsnmpPassword 05f5436fbcdeda00ccb795c17e87b43fae -emConfiguration LOCAL -datafileJarLocation F:\oracle\product\10.2.0\db_1\assistants\dbca\templates -datafileDestination F:\oracle\product\10.2.0\oradata -responseFile NO_VALUE -characterset WE8MSWIN1252 -obfuscatedPasswords true -sampleSchema true -recoveryAreaDestination NO_VALUE
Command = C:\WINNT\system32\cmd /c call F:\oracle\product\10.2.0\db_1/bin/dbca.bat has failed
INFO: Configuration assistant "Oracle Database Configuration Assistant" failed
*** Starting OUICA ***
Oracle Home set to F:\oracle\product\10.2.0\db_1
Configuration directory is set to F:\oracle\product\10.2.0\db_1\cfgtoollogs. All xml files under the directory will be processed
INFO: The "F:\oracle\product\10.2.0\db_1\cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
SEVERE: OUI-25031:Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured.
1. Check the Details panel on the Configuration Assistant Screen to see the errors resulting in the failures.
2. Fix the errors causing these failures.
3. Select the failed assistants and click the 'Retry' button to retry them.
INFO: User Selected: Yes/OK
INFO: Starting to execute configuration assistants ......
tanks

Oracle 10g2 installation stucks at Oracle Database Configuration Assistant

Hi,
I was trying to install Oracle 10g2 on a remote server. The linux version is FC5. The installation stoped at Oracle Database Configuration Assistant. How can I fix it?
Thanks a lot
Lu

Thanks for the reply. The details are as follows. I was trying to install Oracle Database 10g Release 2(10.2.0.1) on Linux Fedora Core 5. So I downloaded 10201_database_linux32.zip. The cksum was correct. I completely followed the steps in this article: http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnFedora5.php
Everything was fine until it got to Oracle Database Configuration Assistant. It hung indefinitely without moving. The message on the screening was:
Output generated from configuration assistant "Oracle Database Configuration Assistant":
Command = /u01/app/oracle/product/10.2.0/db_1/bin/dbca -progress_only -createDatabase -templateName General_Purpose.dbc -gdbName csci585.usc.edu -sid csci585 -sysPassword 051e421f15d524e2fb763a340793d33c1c594d87e6c0773f71 -systemPassword 05f8ff2a15958d237280c14aa0cfc26a7e23ffc20d70c6e080 -sysmanPassword 0558a50d15b50780caf748645c350d92581789988d719ede4b -dbsnmpPassword 05ca6bea1475cdbb6780d96cc4fb00a6ad0921b9eaf66a01dd -emConfiguration LOCAL -datafileJarLocation /u01/app/oracle/product/10.2.0/db_1/assistants/dbca/templates -datafileDestination /u01/app/oracle/oradata/ -responseFile NO_VALUE -characterset WE8ISO8859P1 -obfuscatedPasswords true -sampleSchema false -oratabLocation /u01/app/oracle/product/10.2.0/db_1/install/oratab -recoveryAreaDestination NO_VALUE
Actually, at the beginning It stucked at Oracle Net Configuration Assistant. I searched the Internet and found an article saying "If scp and ssh are not in the path /usr/local/bin, then create a symbolic link in /usr/local/bin to the location where scp and ssh are found", I did that and it passed Oracle Net Configuration Assistant, but then stopped at the next step Oracle Database Configuration.
One thing I think is helpful to know is that the server was previously installed with Oracle10g1. It worked for three years as the server for the students doing projects in a database class. But recently the JDBC to spatial database connection had some problem so we decided to install Oracle10g2. We deinstalled the previous Oracle10g1 with OUI but we are not sure if the deinstallation is clean and complete.
Any help will be highly appreciated!
Lu

Database Configuration Assistent and JVM

Hi
Is it possible to tell Database Configuration Assistent to install JVM 1.4 instead 1.3 during creation of new database in Oracle DB 9.2

No. The version of the internal JVM is tied to the version of the databas. All 9.2 databases will have a 1.3 JVM. If you need the 1.4 JVM, you can upgrade to the 10g database.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

8.1.5 Install Problem: Database Configuration Assistant

I have problems installing Oracle 8.1.5 on Linux.
On the "Configuration tools" screen, I get the following
error for the 'Oracle Database Configuration Assistant':
"A required command line argument is missing"
The installation claims the error is not critical.
When I try to access the database with SQL*Plus and the default
SYS/CHANGE_ME_ON_INSTALL login, I get the following error:
ORA01033: Oracle intialization or shutdown in progress.
I cannot start or stop the database.
When I use "connect internal" in srvmgr, and try to do "startup",
I get "insufficient privileges".
When I use "connect SYSTEM/CHANGE_ME_ON_INSTALL", I get ORA01033
again.
My system configuration:
RedHat 6.0
2x Pentium II 266
192 MB RAM
Java JRE 1.6.5
Kernel 2.2.10
Hints etc. appreciated.
null

I have exactly the same setup (ie 2.2.10 etc) with
exactly the same error message on install. In fact
as far as I can tell no database was created because
of this error. I run the "dbassist" sepeartely after the
install and I get :
" JNLS Excetion:oracle.....
Unable to find any National Character Sets.
Please Check your Oracle Installation"
This is a stock redhat 6.0 install with the addition
of the redhat errata updates(ie enlightenment-0.15.5-36
, X, kde etc) and kernel 2.2.10.
Yes logged in as the "oracle" user which also has group
dba priv.
Michael (guest) wrote:
: The default password for sys is change_on_install, not
: change_me_on_install, although a regular "connect internal"
: should still work regardless (it won't for future versions, but
: in 8.1.5, it should still work at least). Are you logged into
: the OS as the "oracle" account (or whatever you used as the
: install account)? Is this user a member of the "dba" group?
: Also, make sure the permissions/ownerships of the files are
: correct--your umask should have been 022 on the install account
: before the install. The install manual states the correct
: permissions on important files, and ownerships should pretty
much
: all (if not all) be oracle:dba.
: If a shutdown was initiated, was it long ago? Live Oracle dbs
: can take a while to shutdown, but if this is a new install and
: not live or anything, it shouldn't take that long.
: Sven Neuhaus (guest) wrote:
: : I have problems installing Oracle 8.1.5 on Linux.
: : On the "Configuration tools" screen, I get the following
: : error for the 'Oracle Database Configuration Assistant':
: : "A required command line argument is missing"
: : The installation claims the error is not critical.
: : When I try to access the database with SQL*Plus and the
default
: : SYS/CHANGE_ME_ON_INSTALL login, I get the following error:
: : ORA01033: Oracle intialization or shutdown in progress.
: : I cannot start or stop the database.
: : When I use "connect internal" in srvmgr, and try to do
: "startup",
: : I get "insufficient privileges".
: : When I use "connect SYSTEM/CHANGE_ME_ON_INSTALL", I get
: ORA01033
: : again.
: : My system configuration:
: : RedHat 6.0
: : 2x Pentium II 266
: : 192 MB RAM
: : Java JRE 1.6.5
: : Kernel 2.2.10
: : Hints etc. appreciated.
null

VISTA & 10g Database Configuration Assistant

Similar Messages

Maybe you are looking for