Vista 32 bit and 64

Hello folks?My question is why the vista 32 bit a microfoon boost have and the vista 64 bit not?. I work here with soundblaster li've 24 bit the sound is good only the microfoon is very soft because there no 20DB boost option and the vista 32 bit has a 20DB option? i doint not understand that

SanderFirefox wrote:
Bleep is **BLEEP** Message Edited by Dale-CL on 03-06-2007 04:0 PM
Please leave that kind of language off our forum. If it's bleeped, that's a really good indication that word isn't tolerated here. Please read our forum rules before you post again.
Dale

Similar Messages

Windows XP Pro (32-bit) and Vista Ultimate (64-bit) on the same Mac Pro HD?

Has anyone been able to install both Windows XP Pro (32-bit) and Windows Vista Ultimate (64-bit) on the same dedicated Windows hard drive? I have four HD in my Mac Pro, and one of them is dedicated for Windows (and bootable via Boot Camp). I found the following technical articles about installing Windows XP & Vista on the same hard drive (using two separate partitions) using a VMWare machine as the test system:
http://apcmag.com/howto_dual_boot_vista_and_xp_with_vista_installed_first__the_stepbystepguide.htm
http://apcmag.com/howto_dualboot_vista_with_xp__stepbystep_guide_withscreenshots.htm
Has anyone successfully installed Windows XP (32-bit) and Vista 64-bit) on the same NTFS partition?
I already have Windows XP Pro (32-bit) SP3 installed on my single NTFS hard drive. I am looking for the best way to add the Vista 64-bit installation on the same hard drive.
Any thoughts and advise are appreciated.

Windows has its own list of boot OSs, and default, from msconfig. It will sit and wait for xx-seconds on startup in Windows if you want to boot from an alternate.
As to whether Apple's OS Switcher (aka startup disk bootcamp control panel or tray icon) sees both, I had Windows Home Premium and Ultimate 64, and pretty sure OS X saw both. That was pre-Leopard and before there were 64-bit Apple drivers.
I can't think of any scenerio of wanting to mix 32-bit and 64-bit on the same paritition, you realize you can't install the one over the other and must do a clean install.
When I added a partition out of main partition (I wanted to put search index and page file on their own partition) those partitions aren't seen - are hidden - to Leopard.

Vista 64-bit and Treo 600 Hotsync solution that works!

I too searched many, many forums and sites for a solution to this problem. And I have found it.
I have an HP dv9260 laptop with Windows Vista Ultimate 64-bit and Office Pro 2007, which I bought in June this year. And I have been unable to sync my Treo 600 to it - until now. (I had even resorted to syncing to my older Toshiba Tablet PC (WinXP Pro, Office Pro 2003) via standard USB sync cable, connecting the Tablet to the new HP with a Belkin Easy Transfer cable, exporting my updated Contacts, Calendar, and InfoSafe records to .vcf, .ics, and .txt files, then transferring between the HP and Tablet, and then importing them into the appropriate app - Whew! man what a pain.
Now I have found a far more elegant and simple method. I found an Infrared USB 2.0 adaptor (dongle) at the Chunwai_1996 store on eBay (http://cgi.ebay.com/NEW-USB-2-0-IRDA-ADAPER-4Mbps-SUPPORT-VISTA_W0QQitemZ110164766509QQcmdZViewItem) for $8.33 USD + $5.67 USD S&H (total $14.00 even) (I believe that the price is now $12.49 USD + $5.67 S&H.) , which said it supported and supplied drivers for 64-bit Vista. It took a little over two weeks to receive the device from Hong Kong (received yesterday, 08-31-2007).
I checked the mini CD that shipped with it but found no Vista drivers. So I just plugged it into a USB port on the laptop. Vista immediately recognized the dongle and installed generic Vista 64-bit drivers from Microsoft. I tested the unit by placing the Treo near it. The unit recognized the Treo as a legitimate device! Next, I followed the directions I found in another thread that had been successful with USB 2.0, Vista 32-bit drivers, and the Treo 600, with one slight modification. Here is a repost from the Vista-Help.ca blog by Kerry Brown, verbatim except for a couple of modifications and few additional steps.
=============================================
Palm Treo 600 with Vista and Office 2007
I've had a lot of people ask about how I got my Treo 600 phone to sync with Outlook 2007 in Vista so I thought I'd write up the procedure. Hopefully Palm will have new Vista compatible software soon but in the meantime here's how I got it working on two computers so far. First you have to use Vista x86. I couldn't get it to work with Vista x64. If you've already tried to get it working then you have to clean up all the leftover stuff before continuing.
1. Uninstall Palm Desktop
2. Insert the CD that came with the Treo but don't let it autorun.
3. Navigate to the correct language folder on the Treo CD and right click on setup.exe
4. Set the compatibilty for XP SP2 and Run as administrator.
5. Run setup.exe
6. During the install the initial sync may fail. Just tell the installation to continue.
7. If you want to sync with Outlook make sure you pick this option during the install
8. Once it's finished close the Hotsync System Tray application.
9. In Windows Explorer go to the Palmone folder in Program Files.
10. Right click hotsync.exe and set it to run in administrator mode with XP SP2 compatibility.
11. Do the the same for palm.exe.
12. Start the Palm Desktop and change the Hotsync settings to manual start.
-and- 12a. ******* Check the Infrared option to make it active and available *******
13. Exit Palm Desktop and reboot.
You should now be able to sync the Treo 600 with Outlook 2007 or Palm Desktop. You will have to manually start the Hotsync application and deal with a uac prompt because it is set to run in administrator mode. The sync only works when Outlook is not running. You also have to sync twice. The first time you will get errors about the default folders for Outlook. Ignore the errors and press the sync button again. If it still doesn't work reboot and try it again. Good luck. Let me know if you find an easier procedure.
=====================================================
After rebooting the laptop, I performed the following additional steps:
A. Manually started the Hotsync app (you can put it in the Startup folder to auto load at Startup).
B. Set the Custom options to "Desktop overrides Handheld" for Contacts, Calendar, Tasks, and Notes - this may help avoid duplicates from the first Hotsync. Also, this is just a temporary override from the default setting "Synchronize the files" for each selection.
C. Selected Hotsync on the Treo and enabled the Infrared option.
D. Pressed the Hotsync 'button' on the Treo and placed it pointing at the Infrared dongle.
The Hotsync ran to completion without errors! Though it did take a good deal longer since it only runs at 115.2 kbps vs. the 480 Mbps of USB 2.0, I am happy.
Hope this helps others with Vista 64-bit systems and Palm OS handhelds.
Cheers.
-Robert
Post relates to: Treo 600 (Verizon)

Will this solution work for the Palm Treo 755p?
Post relates to: Treo 755p (Sprint)

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

Vista 64 bit and CS4 and color management

This is a question about Vista 64 bit and CS4 and color management. I scan 4x5 film and sometimes end up with up to or even bigger than 1 GB files. Obviously that needs as much memory as possible. Windows XP is limited in this regard and I am in the market for a new speedy computer which won't force me to stay at a snail's pace. In this month's Shutterbug, David Brooks in his Q&A column says to avoid Vista for color management reasons, but offers no explanation or support for his opinion. He implies one should wait for Windows 7 for some unstated reason. With a calibrated monitor and printer and Photoshop controlling color files sent to the printer, why would Vista be any different or worse than XP? Is he on to something or just pontificating? Does anyone know any reliable info about Windows 7 that would make it worth waiting for?
Thanks.

Zeno Bokor wrote:
Photoshop has direct access to max 3.2gb
On Mac OS X, PS CS4 can use up to 8 GB of RAM, but only directly accesses up to 3.5 GB. (Figures quoted from kb404440.) In using PS CS4 on Mac OS, though, direct Memory Usage maxes out at 3 GB even. If you set usage to 100% (3 GB), then plug-ins (including Camera Raw and filters), as well as actions and scripts, can access RAM above that 3 GB to between about 512 MB and about 768 MB total (seems to vary depending on which filters et al that you are using), leaving the rest up to 4 GB for the Mac OS. If you have more than 4 GB, then the amount of RAM above 4 GB is used by PS as a scratch disk. This increases performance significantly for most things because writing to and reading from the hard drive is much slower than doing so with RAM.
I haven't done the testing for actual RAM usage and such for PS CS4 on Vista 64, and Adobe's documentation is very much lacking in detail, but, based on the statement "If you use files large enough to need more than 4 GB of RAM, and you have enough RAM, all the processing you perform on your large images can be done in RAM, instead of swapping out to the hard disk." from kb404439, it seems that PS would be using RAM in very much the same way as I described above for Mac OS, except that the scratch disk usage in RAM wouldn't be limited to 8 GB (instead to how much you have installed). Has anyone done any performance/load testing to know for sure? I didn't see any such studies published, but I am curious if one has been done.
I will agree that there is a definite performance advantage when using PS CS4 (64-bit) on Vista 64, which I've experienced, especially when working very large compositions.
My initial recommendation to the OP to use Mac was based upon reading those articles about bad color management. As I stated before, I have never experienced that problem, and clearly the views of all that have posted here so far indicate that the problem may not be a real issue. (Perhaps this David Brooks fellow and Steve Upton both like to mess with their computers and broke something in Windows?)

Windows Vista 32 and 64 bit key number

Hello
XP has been installed from a disk partition (D)
My notebook has been upgraded from XP to Vista 32 bit with the CD I got from the pakage.
In the buttom the is a stamp with the key number.
I have CDs both with Vista 32 and Vista 64
1. Is the key number the same to the 32 and to the 64 bit
2. I would like to format the C drive.
3. Can I install Vista 64, from the CD?
Thank you for your help
This question was solved.
View Solution.

No worries. Yes, you can perform an install of Vista with the DVDs that you have. You can reformat the hard disk as part of the installation.
Before you begin, go into the Device Manager to see which wireless adapter, graphics adapter and lan adapter is installed and write it down. Doing that will save you some time.
You will need the following DVDs from what you have stated the notebook was delivered with..
Operating System DVD Windows Vista Business SP1 (64-it)
Application and Driver Recovery DVD 32-bit & 64-bit for Windows Vista
Write down the twenty five character license activation key before you begin. Enter it when requested to by the Windows installation script. After the installation is complete use the driver disk to install the drivers. If HP Support Assistant is available on the driver and application disk, install that also.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Windows Vista 64 Bit and Button Support - Qosmio G30?

Windows Vista 64 Bit and Button Support?

Everybody claiming that Vista x64 (or Ultimate) can't be used with FN keys or Flash Cards is utterly wrong!
I have a Qosmio G30 running Vista x64 Ultimate, and have both FN keys, Toshiba Flash Cards and (partly) the hardware buttons at the top working.
After a lot of research, I found that Toshiba has released a 64-bit version of VAP called util_tvap_27581D. If you google it, you might discover it...

I am running Windows Vista 64 bit and i get a runtime error R6034. How can i fix this and get itunes to work?

I am running Windows Vista 64 bit and i get a runtime error R6034 when i was updating itunes. How can i update itunes with out getting this error?

* Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"
App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore

Unable to share music between a Windows 7 64 bit and Vista 32 bit

I have a 32 bit windows vista computer and my wife has a 64 bit windows 7 computer,both of us have home share on, we are conected through wired router and can share docs pictures and just about averything else on our PCs but when we try to share our I-tunes we can see each other music and play the music but we can not add any of the songs to our play list Any help why this is a problem

We don't get the "Items not in my Library" and we can not click and drag items to each others Librarys

Just downloaded Firefox 4 on Windows Vista 32-bit and its not working at all.

So I just downloaded Firefox 4 on Windows Vista 32-bit, and it's not working at all. I open up Firefox and there is not tab bar, and all the command buttons are repeated 3 times, and are on 3 different bars. This only happens with Firefox 4 and not Firefox 3.6.10. Also, when I go the menu bar and I try to click soething, nothing happens. I'm not sure why this is going on. Help anyone? Here is a link to a screenshot of my browser.
http://img683.imageshack.us/i/firefox4y.jpg/

I have this too, but doesn't even startup now? I downgraded to the previous version and all is OK. I also have a 64 bit version of Vista and it seems to work "a-OK" on that machine.
Seems to me to be 32-bit issue.
Editing this post:
I just seen a possible answer...Do you have roboform installed (in the taskbar also)? If so, try disabling it or removing it and try to start again. I said above that I have 2 units and on the one (32-bit) I have Roboform installed and it crashes, but on the other one I don't...so go figure.
According to the report I read, if you upgrade Roboform it should be OK, although I have not tested as of yet...I am still at work...
Hope that helps...

I'm running windows vista 32 bit and the dep shuts down my itunes

I'm running windows vista 32 bit and windows DEP shuts my itunes down as soon as it begins to load. Help?

"the registry settings used by the itunes drivers for importing and burning cds...."
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

HT1473 I have iTunes on my Dell Vista 64 bit and while trying to burn a book to cd it keeps telling me to insert a blank cd when I have done that already. What do I need to do to get it to recognize a blank cd and continue with the burn?

I have iTunes on my Dell Vista 64 bit and while trying to burn a book to cd it keeps telling me to insert a blank cd when I have done that already. What do I need to do to get it to recognize a blank cd and continue with the burn?

Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Dell Inc. Inspiron 5721
iTunes 11.1.3.8
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002FB7200B6E2500
Current user is not an administrator.
The current local date and time is 2014-01-01 16:14:14.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.3.0),
D:   PLDS DVD+/-RW DU, Rev
Audio CD in drive.
Found 15 songs on CD, playing time 55:35 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:13:47
Track 3, start time 07:40:44
Track 4, start time 11:32:54
Track 5, start time 14:33:34
Track 6, start time 18:24:06
Track 7, start time 22:00:28
Track 8, start time 25:36:27
Track 9, start time 28:47:47
Track 10, start time 32:56:24
Track 11, start time 37:07:54
Track 12, start time 40:11:29
Track 13, start time 45:02:62
Track 14, start time 48:42:65
Track 15, start time 51:56:11
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are:   24.
The drive CDRW speeds are:   24.
The drive DVDR speeds are:   24.
The drive DVDRW speeds are:   24.
The last failed audio CD burn had error code 4310(0x000010d6). It happened on drive D:   PLDS DVD+/-RW DU on CDR media at speed 24X.

Lenovo Provides 32 bit and 64 bit versions of VISTA & 7 by recovery media for FREE BUT HOW???

Lenovo advertises this title:
When is it possible to switch between 32 bit and 64 bit versions of Microsoft Operating Systems by using recovery media?
In this page:
http://www-307.ibm.com/pc/support/site.wss/MIGR-74752.html
BUT
Doesn’t give any info that how??? I
How do I contact a Lenovo Support Centre to place an order. Link brings you to contact numbers for Lenovo and after I call them they say these numbers are for IBM and it is only for hardware support.
I am wondering got know how on earth they accept orders for this type of complex issue by phone???
Specially that I am dealing with so special situation and I need some e-mail address to describe it Lenovo and wait for the answer...
I appreciate it if somebody could help me with this...
Thanks in advance for your help guys...

Awesome dude,
Thanks for well described reply. I enjoyed it specially when I found out you don't work for Lenovo.
I am curious to know something. I could buy Windows 7 Bit for a very good price form Microsoft offers for university students that it probably cost me the same price as recovery media. Do you think it is a good idea to install a totally fresh windows 7 (NOT from the recovery media) on my t400s?
I am asking this because when you install operation system with provided recovery Media it builds another partition
with this name SERVICEV003 that is about 2 Gb and contains system files and stuff related to my laptop. I am afraid if I install windows without using recovery media but using Microsoft original DVDs then my laptop doesn't function properly?
What is your idea about this issue,
Thanks again for all your help, I appreciate it,
Cheers,
Mehrad

CS4 stopped working in Vista 64 (both 32 bit and 64 bit)

Photoshop CS4, both 32 bit and 64 bit have been working great until after the Adobe update process loaded 11.0.1. When I try to start either the 32 bit or the 64 bit version of CS 4, I get the opening screen and then an error message that says, ..."Photoshop CS4 stopped working", and it closes the application. CS 3 still works fine. CS4 Bridge works fine. I have made no changes to PS CS4. Any ideas?

In the event of a situation where the application is unavailable for de-activation, you need to install the program again and, when prompted for activation, call the special (not customer support) number on the screen.
I have never had to try this, but that information has been posted several times.

Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)

SWindows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)% Greetings,
Today I ugraded to Windows 7 Ultimate 64 bit edition and am having a problem with my 5. surround sound that previously worked perfectly in Windows Vista Ultimate.
I am using an X-Fi XtremeGamer PCIe card and the problem is that I have full working surround sound, but the bass/ subwoofer isn't working.
Previously in Vista I enabled bass redirection in the Creative Console and this would make the subwoofer work. In Windows 7 in the console there is a bass redirection option but it doesn't work. Also in the Creative Audio Control panel there is NO option for bass redirection either.
Audio sounds tinny and I am 99.9% everything is set up correctley, I think this is a driver problem. At this moment I'm unsure if this issue plagues both the 32bit and 64bit versions of Windows 7 or just the 64bit version (since the console launcher is 32bit).
Anyone had a similar problem and cracked it's Apart from this small glitch Windows 7 is great!
Thanks!

WRe: Windows 7 64 bit and X-Fi XtremeGamer - Bass Redirection Not Working (No Subwoofer)h heya, I have exactly the same problem.
running 64-bit windows 7, X-Fi Xtreme Audio sound card, Trust 5. speakers.
the bass used to work in XP because I could enable bass redirection and alter crossover frequency.
these options are now no longer available in the windows 7 drivers (.4.90) and my bass is not working at all.
it is very annoying, there has been no comment from creative than i can find because it only appears to happen to a small percentage of speakers.
basically if someone from creative can't help fix the problem,?people with this problem?will unfortunately be forced to purchase a different brand of sound card because my speakers certainly aren't broken and work with the on-board sound fine.
so if anyone else has the same problem or any advice on how to fix the problem, please comment.

I'm using win7 64 I'm trying to reinstall itunes as it doesn't see my itouch. I'm downloading the 64 bit version but it give me an error saying it 32 bit and wants me to go to the bonjour downloads for the 64 bit?

I'm trying to reinstall itunes 64 bit but it keeps saying its the 32 bit and wants me to go to the bonjour downloads for the 64 bit?

Try:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Vista 32 bit and 64

Similar Messages

Maybe you are looking for