VISTA 32 doesn´t detect my Audigy 2 ZS.

<img height="" alt="[/img] width="" src="http://forums.creative.com/i/p.gif">
The problem is, when i try to install the drivers SBAX_PCDVTBETA_US_2_2_000, this message below appear to me:?"Setup is unable to detect a supported product on your system.Please ensure that your product is properly installed beforerunning this Setup program.Setup will exit."?The point is before this, Vista tries to find the driver to my Audigy 2 ZS without any success... So, any body knows some solution for this?ThanksByron

I'm getting the same error. What the hell is up with Creative? The only reason I bought this card is so I could have 5. support in Vista (NVidia discontinued driver releases fot their NForce2 chipsets...). Maybe I'll try another PCI slot...

Similar Messages

  • Vista: computer doesn't detect iPod

    I got my iPod 2 days ago, I went home and connected it to my PC and everything worked fine, I had my old iPod Nano connected at the same time, and both worked just fine. I put the songs on my iPod. I tried connected it to my PC a few hours later (just the new one) and it's not being detected by Windows, or iTunes. I'm using my old iPods USB cable, I'm not sure if that would affect it though because I used that cable for it when I connected it the first time.

    I can't restore my ipod because it is not detected with the ipod updater either so resotring is unavailable.

  • Windows 7 doesn't detect my Canon MX850

    Hi all,
    I have a Canon MX850 printer connected to the network. Unlike other reports in this forum, Windows 7 doesn't detect my printer at all.
    I can ping the printer and access it's network configuration page so network connectivit is not the issue (I even disabled the windows firewall, just in case).
    Any clues where to go next?
    Thanks,
    S.

    Hi,
    Can the printer work fine on other machine on the network?
    At this stage, you can refer to the following steps for a test.
    1. Plug the printer to the Windows 7 machine directly and install the proper driver. For your reference, I have enclosed the latest driver for Windows 7 below:
    Canon MX850 driver
    Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    Is the printer working fine on the Windows 7 machine? If not, please let me know. Otherwise, you can put the printer back and connect it via network again.
    2. If the printer still cannot be detected via network, I suggest you remove the original printer on the computer and recreate a new network printer icon.
    For more information to access a network printer, please refer to the link below:
    File and Printer Sharing in Windows Vista
    Thanks,
    Novak

  • Lightroom 4 doesn't detect Photoshop Elements 9/10 for external editing

    Hi,
    I own Photoshop Elements 9 and recently decided to install trials of Lightroom 4 and Photoshop Elements 10.  For whatever reason, Lightroom doesn't detect Photoshop Elements 9 or 10 for external editing.  I need to make sure this functionality works before proceeding with purchasing Lightroom and possibly Photoshop Elements 10.  Does anyone know how to resolve this issue?
    Thanks,
    Matt

    List of supported Nikon cameras. I think you're out of luck for tether-shooting.
      Nikon   
    D3
    D3s
    D3x
    D90
    D300
    D300s
    D700
    D5000
    D7000
      Notes on Nikon cameras   
    If you trigger the shutter with the tether bar capture button, the image must finish downloading before another photo can be captured. Triggering a capture with the shutter release button on the camera does not have this limitation.
    Images do not save to the compact flash card. They are only downloaded to the computer.
    Only one Nikon camera can be attached at a time.
    Windows 7, Windows Vista, and Mac OS X 10.6 are not officially supported for the D3x, D90, and D5000, but they can still work.

  • Ovi Suite doesn't detect Phone

    Well I have N97
    Used to have problem 'USB phone parent' driver couldnt be instaled - Just done PC suite cleaner and fixed that problem.
    Now its installed driver wise, so 'My computer' sees N97, and phone says its in PC suite mode BUT
    Ovi suite doesn't detect it. I tried 'add new device' it still didnt find it.
    I can browse it fine through my computer.
    And before you say - yes phone is in PC suite mode.
    I also just did hard reset of phone

    Please follow the steps provided below and check.
    Uninstall the following from add/remove
    - Nokia Ovi Suite
    - Nokia Connecting cable driver
    - PC Connectivity Solution
    Then go to device manager ( Right Click My Computer-Manage) then ports- Uninstall all the ports which is by name nokia (
    there might be multiple entries, but remove them), but please dont remove any other from there which might lead to
    malfunction.
    - go to C:\Documents and Settings\All Users\Application Data\OviInstallerCache and remove all the sub folders inside that.
    For windows vista and windows 7 it will be C:/Program Data/OviInstallerCache
    - Restart Computer
    - Download and install ovi suite
    - Restart computer
    - Then connnect the device and wait till all the drivers are downloaded.
    - Then launch Ovi Suite connect the device.
    This has solved the issue in many cases.
    Hopefully this works.
    Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

  • Latest version of Itunes doesn't detect my internet connection.

    Itunes doesn't detect/see my internet connection. I reloaded it twice, When in Itunes, I can't download anything from the Itunes site. No tutorials,no software updates, nada! I tried it in the previous version of the Itunes setup too. Same problem.
    I have an HP laptop, Vista Home premium (works fine anywhere else), Nortons 36O (disabled), ATT DSL
    I am running Firefox too, and tried to connect with Internet Explorer 9.xx, didn't work either. Some of the messages indicate that the Proxy Server info is missing/incorrect as configured. This is out of my league. I don't have enough background to TS this issue myself.
    Seems like a sporatic, but common problem with other users as well. I need Itunes to run, correctly so that I can fix my Iphone. The limited diagnostics found in Itunes tells me that the phone is ok and communicates with the test software. But I can't get any deeper than that.
    Thank you for your help.

    I think you're missing the point. If you rip or purchase music at 128k, 256k, 320k etc. then there is no benefit to be had converting it to Apple Lossless. The files will get bigger but the data thrown away to make the previous lossy version cannot be reclaimed. If, on the other hand, you routinely rip in .wav or .aiff then you should end up with smaller files of the same quality which is indeed worth the effort.
    tt2

  • My Computer Doesn't Detect My Camera

    My computer doesn't detect my camera! Can someone help? (If you haven't noticed, I created this account just to ask this question! Help is greatly appreciated!) 
    I recently had to do a system restore on my computer. After I restored, I tried to upload photos from my Powershot A4000 IS camera to my computer (I had done it before successfully) only to find that the Autoplay window didn't pop up (like it usually did) and the Hardware Fail sound played. I then tried to start my CameraWindow software manually, but it said my camera wasn't connected. I have several Usb ports on my computer, and I tried all of them. Nothing happened! I'm sure that I'm not missing any essential Canon software and my camera isn't damaged; I barely use it, and the Powershot A4000 support page claimed that I didn't need any extra drivers for my edition of Windows! Help! 
    P.S. My OS is Windows Vista SP2.

    Stupid_Computer,
    There are some additional questions I would like to ask that will help me determine what is wrong.
      1.  Have you tried connecting your camera to a different computer? 
      2.  Do other computers fail to recognize the camera?
      3.  Do you have any other devices connected to the computer, like a printer, scanner, webcam, external hard drive, etc?
    If this is a time sensitive-matter, additional support options are available at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Computer doesn't detect sound c

    Ok it seems I've made a big mistake... I had de-activated my SB Audigy 2 in Device Manager and was planning to un-install to do a fresh install.
    Before I un-installed it I forgot to activate it and now everytime I start the installation it says it doesn't detect it... However I managed to install Creative Game Port and Creative Audigy Audio Processor (WDM) manually in Device Manager but it doesn't give any sound and when I try doing the installation it still says it doesn't detect it.
    Is there any way to make it so it detects it again (without having to mess around with hardware by unplugging and plugging card) through BIOS or some software?
    Thanks!

    Hey, thanks for taking your time to help
    > Have you run a test on the card, via the sound test from the Control Panel?
    Yes it was simply saying there was no device, even after installing Creative Game Port and Creative Audigy Audio Processor (WDM). These were installed manually with the Creative Installation CD but they probably weren't the drivers exactly...
    > Is the card fully seated in the slot?
    Um I guess so... I mean it had always worked before I un-installed it. But games like BF42 and BF2 crashed. They didn't crash when I had my older system.
    Since when I've changed to a new one with a different processor, motherboard and graphics card I've had many problems at first, BSODS etc and eventually everything got fried, but only hardware survi'ved, the SB Audigy 2.
    The tech guys at the store replaced everything but the Sound Card, which seemed to be ok, and changed the motherboard to a GA-K8NXP Sli and it seemed everything was ok this time, no random BSODs but I was having lock-ups (screen turning black with hissing/screeching and crackling noises), CTDs and auto reboots in BF2 and BF42.
    First I went to look at the IRQs, the Sound Card was sharing an IRQ with one of the graphics card. I de-acti'ved that specific graphics card and ran the games with only but I still was having problems. I decided to use WinDbg to debug the MiniDump files that had been created after the crashes.
    One of them refered to ctaud2k.sys, which is a driver used by the Sound Card I believe, and that is why I first tried to de-activate the sound card (still crashed somehow) and then finally decided to un-install it (forgot to activate it before doing this).
    At the moment I'm using AC97 Onboard audio and had no crashes whatsoever in any of the games. They do have worse audio quality of course (crackling/popping in BF2 and echoes in BF42 if both set to play with Hardware), but no crash!
    Perhaps the SBAudigy2 was semi-damaged or something, I don't know. I'm thinking of buying a new one. I hope I'll have no problems with it.
    What bothers me at the moment though is that Windows keeps detecting a "PCI Input Device" (Creative Game Port) and "Multimedia Audio Controller" (Creative Audigy Audio Processor (WDM)) and asks me to introduce the Creative Installation CD all the time so I've de-activated both so it stops asking me, as I am afraid they could conflict with AC97.
    Thanks.

  • I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

    Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • How can I print from iPad to a Brother printer with a TP-link tl-wps510u connected to it without using a computer? It doesn't detect the printer.

    I have a Brother printer that doesn't have wifi, but I bought a Wireless Server Print to connect to it. I want the iPad can print directly to the printer without using a computer, but the iPad doesn't detect the printer. Is that possible?

    javigomez88 wrote:
    I know that Brother has an app that works with its wireless printers, even if they are not airprint. My printer isn't wireless, is a wireless print server attached to the printer what is able to make this printer wireless. Could this app be a solution or only would work with the wireless Brother printers?
    The Apps usually only work with wireless printers, though if its free, there is no harm in trying, and see if it gets picked up, but its doubtful, as the print server would need to transmit in the same protocol the Brother Print App is expecting from the supported wireless printers. 

  • Windows Vista Ultimate doesn't install on Satellite M40

    Windows Vista Ultimate doesn't install on this notebook. Vista hangs after installation and doesn't boot up. Does anybody know what the problem is?

    Hello
    As far as I know older units are not Vista supported. I believe it is not necessary to say why. Satellite M40 is older notebook model and definitely not Vista supported. Many newer WXP preinstalled notebooks are Vista supported but Toshiba has for each model designed new BIOS version and before installing Vista the BIOS update must be done at first.
    I can imagine that new BIOS is needed for M40 too but as I said before this machine is not Vista supported. I am very interested if someone will report more about Vista on Satellite M40.

  • HT5167 after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

    after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

    after I updated to 10.7.4 my macbook pro 2011 doesn't detect external display anymore what should I do?

  • What is apple doing. This macbook pro doesn't detect external display, doesn't detect my wacom..

    This is awsome. Cant work on this laptop... Doesn´t detect nothing.

    Hey there mrlrsm,
    Welcome to Apple Support Communities. 
    The article below provides troubleshooting tips that may help you resolve the issue with your MacBook Pro no longer recognizing the external display.
    Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
    Ciao,
    -Jason

  • My MacBook Pro 13.3inch (Late 2011) doesn't detect earphones.

    My MacBook Pro 13.3inch (Late 2011) doesn't detect earphones being plugged in after I installed Mountain Lion. If I reboot, it works but after a few unpluggings and more plugins, it doesn't detect them anymore until I reboot. Help please.

    This may or may not fix your problem.
    Try a NVRAM reset.
    Try a SMC reset.
    If neither work, you're just going to have to take your unit into your local Apple Store or AASP and see if you've a hardware issue.
    Good luck,
    Clinton

  • Since last update on itunes, my PC doesn't detect any of my devices. HELP!

    Since I downloaded the last version of iTunes my PC doesn't detect any of my devices (ipad, ipod, iphone). Have been connecting my devices to the PC, when opening iTunes there is a legend, with the ipod saying that itunes doesnt detect the device to uninstall itunes and reinstall, have done it twice and the problem is still there. Just bought a new ipad and when I connect it to the PC iTunes doesnt detect it. When connecting my iPhone same thing happens, when I try to export the photos to the PC the folder where the photos are suppossed to be has no photos

    Hello andreaparra,
    Thanks for using Apple Support Communities.
    I found the following article that will help you in resolving this issue, where none of your devices are being recognized by iTunes.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If you get to the part where it asks you to uninstall iTunes, even though you have done it before, be sure to uninstall iTunes and the other components in the order listed.
    Take care,
    Alex H.

Maybe you are looking for