Vista 32bit on my think pad

Hello everyone, I just boight a T61 think pad with 4gb of memory everythink is perfect,
I have a Windows Vista Ultimate 32bit OEM delivred with my laptop, I wanted to know if there is any chance that lenovo changes it for 64 bit OS, if it is possible who should I contact?
I tried to look for this service with Microsoft, but they offer it only for retail buyers
Thanks for repling guys.
Moez

Audio: Realtek or Cirrus. WE have to manually find, download and install latest driver.
RealTek is usually easy and their Vista/7 32-bit will install or there is a zipped driver and use Device Manager after unzip to "update driver."
Same for GPU drivers too.
So we are on our own,the base drivers enable the device chip but that is all.
The list of unsupported usually means 64-bit will be more difficult and extra steps is all.

Similar Messages

Will OWB 10g Release 2 (10.2.0.3) for Vista 32bit work 100% on XP Pro

All,
I have a problem with installing Oracle Warehouse Builder 10g Release 2 (10.2.0.1), after the install i cannot run the design center. So I removed this software and installed the newest version (see title). But there is "Vista 32bit" in the download title. Now I installed this and it seems to be working but I don't want to see my future work become invalid after a while. I can't find in the documentation anything about this new version working on XP.
Anyone who can help me out pls.

Tash wrote:
It is not that I wnat Vista version but I couldn't get 10..2.0.3 XP version. If there is this version available for XP, I don't want vista but if it;s not available I am wondering if vista version works on XP like other softwares which latest alys works on previous version OS.Not in oracle. For oracle, you should use the correct version for the right o/s only.
Thank you for info. Can I get a XP version of 10.2.0.3 without having to patch from previous version?AFAIK, I don't think its possible. You have to install 10201 and than apply the patch to it to make it 10203.
HTH
Aman....

ITunes crashes on startup (7.4.3.1 and previous versions on Vista 32Bit)

Deleting/moving the itunes library files (iTunes Music Library.xml and iTunes Library.itl) makes it work fine which leads me to believe it crashes when loading the playlist. But not always!
iTunes crashes on startup on my vista 32bit.
Even after I upgraded to 7.4.3.1 and reinstalled iTunes several times.
I've also tried reinstalling quicktime and selecting "Repair" to no avail.
Running it in XP2 compatibility mode doesn't help.
Disabling Aero doesn't help.
Whether or not my iPhone is plugged in or not seems to make no difference.
This is the error msg.
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 7.4.3.1
Application Timestamp: 46f9e539
Fault Module Name: ntdll.dll
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549bdc9
Exception Code: c0000005
Exception Offset: 00062613
OS Version: 6.0.6000.2.0.0.256.6
Locale ID: 1033
Additional Information 1: 3121
Additional Information 2: cd54b1815dd1a98f8c82cbbbae6b50f8
Additional Information 3: cfbc
Additional Information 4: 4370a065bc45e009ac3228b1173ce35a

Crashes on windows xp pro sp2 as well.
A whole night wasted trying to trouble-shoot this bogus software.
Ipod touch returns to best-buy tomorrow.
Never to buy another apple product.
Love & Kisses.

TS1702 how can I remove large number of photos on my iPhone 4s from iTunes using a PC - Lenovo Think Pad - so that I can reduce the space used on the phone by 50%?

how can I remove large number of photos on my iPhone 4s from iTunes using a PC - Lenovo Think Pad - so that I can reduce the space used on the phone by 50%?

You don't need iTunes for that. Simply connect the iPhone to the PC where it will be recognized as a camera. You can then select the photos you wish to transfer, transfer them, and delete them.

I have an IBM Think Pad and since installing the latest version of Firfox, the trackpoint scrolling on my mouse no longer works

I have an IBM Think Pad and since installing the latest version of Firfox, the trackpoint scrolling on my mouse no longer works

Try to modify the pref ui.trackpoint_hack.enabled on the about:config page from the default value -1 to 0 or 1 to see if that makes the scroll pad work. 
Close and restart Firefox after changing the pref.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean)

Error when installing itunes version 9 on Windows Vista 32bit

When trying to install itunes version 9 an error has come up before the installation is complete.
The error reads -
An error occurred during the installation of assembly
'microsoft Vo80.CRT,version = "8.0.50727.4053,"type="wn32",publickey token=1fc8b3b9ale18e3b" process or architecture="x86"
HRESULT.0x800736133
Can anyone help me - I am using windows vista 32bit. Have tried turing off ALL security and reinstalling as someone else suggested previously. But still have had no luck
Thanks

Thanks Emma!
Ox800736B3
Not a lot of documentation on that one, I'm afraid, but there's some general principles troubleshooting we can try with it that might get us moving forwards.
(1) Do you currently have a copy of the Microsoft Visual C++ 2005 Redistributable Package installed on that PC? If so, try downloading the following security update:
[Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update|http://www.microsoft.com/downloads/details.aspx?familyid=766a6af7-ec73-4 0ff-b072-9112bab119c2&displaylang=en#filelist]
Does iTunes install for you after applying that update?
(2) If no joy there, head into your Windows Update and click on the Update History. Have a lot of Updates also been failing for you recently? If so, doubleclick on the entries for the failed updates to bring up more information on each. What error codes appear for you for the failed updates? (Precise spelling, please.)

ERROR 1002 WHILE ROCOVERY DISK HP G60-441 US WINDOWS VISTA 32BIT

I HAVE HP G60-441US MODEL WITH WINDOWS VISTA 32BITS, PRODUCT NUMBER NW142UA. I TRY TO MAKE ROCOVERY DVD DISK WITH RECOVERY MANAGER BUT IT IS FIALED ON 2ND DVD. THEN I TRY TO RECOVERY WITH RECOVERY MANAGER IT SHOWS ME ERROR 1002 WHILE I PRESS OK ; COMPUTER IS RESTARTED AND BOOTMGR IS MISSING PRESS CLT+ALT+DEL FOR RESTART. AFTER THAT I CHECK HARD DRIVED MEMEROY IT IS ALSO FAILED. AND WHILE STATING COMPUTER IT SHOWS ME TO REPALCE BATTERY.
I DID ORDER RECOVERY DISK FROM HP SUPPORT AND REPLACEMENT BATTERY. IT TAKES ONE WEEK TO GET IT.
NOW I WANT TO KNOW THIS IS HARD DISK PROBLEM OR JUST SOFTWARE PROBLEM. I TRY TO DO FORMAT MY COMPUTER DUE TO BAD PROFORMANCE, TAKES TOO LONG TIME WHILE STARTING COMPUTER AND IT IS FIALED ON WINDOWS UPGARDING AND CONFIGURING.
THANKING YOU.

Hello kmdavis. I have read the issue you are experiencing. Your computer is experiencing a hardware failure, and you should contact HP technical support for further assistance. Their options will be based on the warranty status of the computer. If you do not have this information, you can locate it at this website: http://h20566.www2.hp.com/portal/site/hpsc/public/wc/home?ac.admitted=1384280905804.876444892.199480...
You can utilize this website to learn how to contact HP appropriately, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please let me know if you have any other questions or concerns.
Mario
I worked on behalf of HP.

Lenovo think pad S230u Black screen with mouse pointer after log in

Hello I dont know if i am on the right board for this but this is the first time i am posting on here. I have a Lenovo think pad S230u. Recently it will load up to the screen where you put in your password and let you put it in your password but then just loads to a all black screen with just a mouse pointer on it thats it. I read on line that some other thinkpads had this issue with a display driver but i couldnt find anything on the one i have. The one i have is running windows 8. Any help is greatly appericated.

Hi Lsaacw,
Welcome to Lenovo Community!
As per the query we understood that you are facing an issue with No Boot to Windows 8 on your ThinkPad S230u.
Please check if the system is able to boot to ‘safe mode’.
Please click here to know the procedure on how to boot the system into ‘safe mode’.
Perform clean boot in safe mode and restart the system to check.
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Ibm Think Pad T30 Beeping error

So i have problem with my ibm think pad T30 i turn it on and this happensVVV
One short beep, pause, three short beeps, pause, three more short beeps, and one short beep.
now based on what ive searched online it says it might be problem either with the
DIMM.
System board
i have no clue how to fix either of these any help or advice?
My laptop: Ibm Thinkpad T30 Windows Xp Pro
im not sure where to find the serial number on it either sadly its kinda old but please respond thanks bye

Love you ajkula66111
I have heen having the same problem with my T40. I put the expansion memory in the orignal slot under the keyboard and it starts up like a dream.
Before I would have to start it up a few times before it would not beep and go to BIOS and then start for real.
summitzl, check out the link (you could probably find the exact one for your computer type, but here is what to look for).
http://www-307.ibm.com/pc/support/site.wss/MIGR-46513.html
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-46515
I do not know if you have an expansion memory (slot is on the back of computer, first one listed on the page of how to get to it), but I pulled that one out and put it in my orignal slot since I am pretty sure the expansion one is newer.
Now, I do not know if I should try to put the old one in the expansion slot or what.
THANK YOU!!!

Windows Vista 32bit or 64bit?

Which is better for my new mac book pro, Windows Vista 32bit or 64bit Ultimate? All I care about is all of my programs and games working properly. And what does 86x mean? Will one version of the bits work faster than the other?

Hi Konnexion,
There is another more important limit with 32-bit versions of Windows, and that is the limit of 2 GBS of RAM per process. Unless some tricks and tweaks are used (which can result in reduced stability), no matter how much physical RAM is installed, a single application can't use more than 2 GBs. This is important for applications that can use large amounts of RAM like video and picture rendering apps, and even some games these days (particularly in Vista).
On the other hand, the 64-bit version of Vista has a number of additional security enhancements over the 32-bit version, such as address-space layout randomization, mandatory driver signing. If you have the RAM (at least 4GBs) and games are not a priority, I would actually recommend using the 64-bit version. Of course, why would you be using Boot Camp, if it weren't for games LOL?
Rich

Treo 750 syncing w/ Windows Vista 32bit

I have a Treo 750 that I had synced with windows xp. Ever since I "upgraded" to windows vista I have not been able to sync. The computer won't even recognize the phone as connected. Here is what I have and what I have tried already. I have, as mentioned, the Treo 750 running windows mobile 5.0/ the laptop was running xp which I had no problems setting up and syncing. I now have window vista 32bit I guess since when I tried downloading WMDC 64bit it wouldn't support the download, so I have WMDC 32bit. When I downloaded WMDC the treo was connected through a usb cable. I have uninstalled and re-installed WMDC several times. Sometimes the device manager will not recognize the usb cable and sometimes it does. When it does recognize the cable it shows a bluetooth symbol and says everything is working properly but when I open up WMDC I am not connected, if I push the sync button nothing happens, if I unplug the usb cable and replug the device manager then will no longer recognize the usb cable. I have also tried everything on the support boards, help forums, you name it I have tried it except a hard reset which I don't want to do until I sync all my info first. Oh yeah the whole reason I am so desperate to sync my phone after such a long time is because my phone constantly freezes up as if I have to much going on which I don't. I have cleaned out every program not necessary so I have tons of memory, so that is not slowing down or freezing my phone. I basically have to soft reset my phone after I do or run 3-4 different applications including phone calls. ANYONE PLEASE HELP EITHER OF THESE TWO PROBLEMS BEFORE MY GIRLFRIEND DUMPS ME FOR SPENDING SO MUCH TIME ON THE COMPUTER TRYING TO FIGURE THIS STUPID THING OUT. THANKS DAVE
Post relates to: Treo 750 (AT&T)

Yeah I have tried that already no luck. Here are some other things that I forgot to mention. I have another laptop that is running windows xp, this laptop has never been synced to anything. I downloaded Microsoft Activesync but it will not connect to that either. The difference with this computer is that when I plug it into the USB port it makes a sound and when I push the usb sync button it makes a beep followed by another beep. Lastly I have another Treo (my girlfriends) that when I first tried to sync to WMDC it did not connect but after running troubleshoots I got it to work on both computers. It is so frustrating.
Post relates to: Treo 750 (AT&T)

Dv6-2018ax Original BIOS for Windows Vista 32bit

I have tried for hours to find the original BIOS for the DV6-2018AX (windows vista 32bit) with no luck. I know there is no BIOS update... I am not interested in that, just the bios it came out of the factory with. If anyone could help me I would be much appreciated. This is for a USB flash... As I cannot recover the BIOS by normal means. Thanks.
This question was solved.
View Solution.

All BIOS versions for your model are posted here:
http://h10025.www1.hp.com/ewfrf/wc/previousVersions?softwareitem=ob-83686-1&cc=us&dlc=en&lc=en&os=40...=
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Water Spill- think pad twist

Hello All, I accidently spilled a little (maybe a 1/4 cup) into my think pad twist. The water quickly drained out the sides. After it dried, i turned it on, and the screen flickered and distorted, but evenutally i got an "installing windows updates" screen, which then flcikered and the machine turned off. Help! Any suggestions? My understanding is that the keyboard is spill resistent, so maybe it;s not that bad? thanks!

Hi
Welcome to the forums
Please have a look here
http://www.guardian.co.uk/technology/askjack/2012/jul/05/drink-spilled-on-laptop
http://m.wikihow.com/Save-a-Laptop-from-Liquid-Damage
Regards
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

How come I can't connect to my wifi on my iPad? My other think pads are connecting. I reset all my settings and nothing. We have a jet pack and I can connect to that?

I can't connect to our wifi. All our other think pads are connected. We have a jet pack and am able to connect...but why not our two think pads? I reset my settings and still doesn't work? Thx

Try rebooting the router. Whether or not it is working with other devices does not matter.

OCCI 10.2.0.3.0 Patch 13 cause crash ntdll.dll on vista 32bit

hi,
I ceated an application using VC++ 2005 and OCCI 10.2.0.3.0 (update patch 13). the application run smoothly on 2000/XP. But if it is run on vista (32bit, tested on several computer), it ocassionally creates crash (not always) when trying to connect to oracle server (also when trying to connect to non existance server, sometimes crash and sometimes successfully displaying time out message),
The crash message is as follows:
Problem Event Name:     APPCRASH
Application Name:     myapp.exe
Application Version:     0.0.0.0
Application Timestamp:     473ad65c
Fault Module Name:     ntdll.dll
Fault Module Version:     6.0.6000.16386
Fault Module Timestamp:     4549bdc9
Exception Code:     c0000005
Exception Offset:     0006278d
OS Version:     6.0.6000.2.0.0.256.6
Locale ID:     1041
Additional Information 1:     97d2
Additional Information 2:     aae4dc92551b959656fcd53b4bc6e928
Additional Information 3:     0701
Additional Information 4:     257a6a00f5b8f65db312588a0172a174
here's the code snippet:
try
     Environment* m_occiEnv;
     Connection* m_occiCon;
     m_occiEnv = Environment::createEnvironment();
     if (m_occiEnv != NULL)
          m_occiCon = m_occiEnv->createConnection(user, pass, constr);
          if (m_occiCon != NULL) return SUCCESS;
catch (SQLException ea)
     m_strLastErr = _T(ea.what());
     return FAILED;
I then tried to upgrade the OCCI using OCCI 11.1.0.7.0 (using the same source code). It also creates random crash but on OraOCIEI11.dll (not ntdll.dll) as follows:
Problem Event Name:     APPCRASH
Application Name:     myapp.exe
Application Version:     0.0.0.0
Application Timestamp:     494c1430
Fault Module Name:     OraOCIEI11.dll
Fault Module Version:     0.0.0.0
Fault Module Timestamp:     48e3389a
Exception Code:     c0000005
Exception Offset:     00103991
OS Version:     6.0.6000.2.0.0.256.6
Locale ID:     1041
Additional Information 1:     298d
Additional Information 2:     d9ff73d6b133e41e5ad025e8ab5a02eb
Additional Information 3:     3eb8
Additional Information 4:     aa3992fb7f26e9ad1e018c76d9dcdb5a
any suggestion?
thank you
Edited by: chn on Dec 19, 2008 3:19 AM

hi again,
I tried to change the createEnvironment into the following:
m_occiEnv = Environment::createEnvironment(Environment::THREADED_MUTEXED);
and somehow, using the latest OCCI 11.1.0.7.0 with the above code, the application seems running well. Tested around 40 times, haven't got any crashed.
When using the OCCI 10.2.0.30 patch 13 with the above code, the application occasionally is still crashed.

Vista 32bit on my think pad

Similar Messages

Maybe you are looking for