Vista 64 bit OS - Installer error when updating to iTunes 10.5

I've tried updating iTunes via "Download Only", but when I try to run the installer (tried by clicking on Setup Admin and even the Mobile App Manager) ... the installer get's to where it appears it is about to successfully complete and then rollsback all changes and states an error is keeping it from installing and that no changes were applied.  Can anyone help me troubleshoot what is causing this?

Here's what I did...found it on another thread about this topic.  Go to Start, All Programs, Apple Software Update.  Let it update itself first.  Then ONLY update to Quicktime 7.7.  Then rerun the iTunes installation program.  That worked for me, and I was getting the exact same message as above.  I don't know if it was the Apple Software Update program or the update to Quicktime, but something fixed whatever was wrong.

Similar Messages

  • Carrier update error when update to itunes 10.5.3 (error 1630)

    Hi, today I tried to update itunes to version 10.5.3 but I recieved this erro: ( error 1630 )
    what's wrong with my iphone 4 ( ios 5.0.1 ) ?!
    And my carrier is MTN Irancell.
    Any ideas?!

    I am getting an error message when I try update my Itunes to ver 10.5.3 through Apple Software Update.
    What does the error message say? (Precise text, please.)

  • Windows Installer error when upgrading to Itunes 8.01

    I receive the following error when trying to install Itunes 8.01 on my Windows XP Service Pack 3 system:
    "There is a problem with the Windows Installer Package - A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor"
    The upgrade fails and reverts back to the previous version of Itunes.
    I tried re-installing windows installer and it is current. All other programs install without issues but Itunes does not install.

    I tried the repair option on Itunes - ran it successfully, turned off Norton AV auto protect temporarily then immediately tried running the setup again on Version 8.01 and get the same error.
    I have not yet uninstalled version 7 of Itunes on my system followed by running the Windows Installer Cleanup utility to completely remove Itunes from the system.
    This issue to date has not been resolved yet but need to try the cleanup option.

  • Error when updating in iTunes

    I'm getting the error code below when trying to update my iPad to iOS 5 in iTunes 10.5. I've tried several times and continue getting it. Any ideas? I did the same update to my iPhone and didn't have this issue.
    [IMG]http://i650.photobucket.com/albums/uu229/siggyart/ErrorCode.jpg[/IMG]

    no problem... and you must not have noticed, but that was me asking the original question too...
    lol... the mathechew solution... it sounds like some kind miracle pill or book or diet...
    Are you tired of being obese? Try the mathechew solution. It worked for me, so it can work for you too.
    The mathechew solution is not for women who are pregnant, or those with heart problems. Consult your doctor before trying the mathechew solution.
    The mathechew solution. Face your fears, and lose weight.

  • Carrier update error when update to itunes 10.5.3

    Hi, today I tried to update itunes to version 10.5.3 but I recieved this erro: ( error 1630 )
    what's wrong with my iphone 4 ( ios 5.0.1 ) ?!
    And my carrier is MTN Irancell.
    Any ideas?!

    If you have iOS 7.1 then you must be a developer, so you should be posting in the developer forums : https://devforums.apple.com/index.jspa

  • HT1349 System Error -' MSVCR80.dII is missing from your computer'. Got this error when updating my itunes. Now it won't let me open itunes.

    Got this message when trying to update the latest version of itunes

    HT1925: Removing and Reinstalling iTunes for Windows XP
    iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue
    This is not my area. I don't use PCs. I'm trying to help by posting information from those who are knowledgable about fixing this problem. The second link above is directly from Apple.

  • Error when updating! Help please!!

    I've been having a problem with the artwork updating on my 5th iPod. I kept getting an error when updating in iTunes whenever I added artwork to songs. So I was told to go into iTunes and go under iPod options and UNCHECK the box to display the artwork on my iPod. Then click okay. Then, go back into it and CHECK the box TO display the artwork and I get an error; "..Unknown Error occurred (-50)". Same error. And yes I have pressed the center button on my iPod to scroll through the different things. And I have restarted the program and computer. Tried disconnecting hte iPod, closing the program, restarting computer, restarting iTunes and reconnecting iPod and every combination of the steps (I've done many searches on this subject here) and same result. I've tried other different things but it all ends up to this error. Can some one please help me
      Windows XP Pro  

    Hi Melophage,
    I managed to do a OS X Recovery Reboot by restarting my computer and holding down Command and 'R'. I reinstalled OS X, and now my computer is working again.
    However I'm going to take my computer into the Genius bar for review.
    I have a Macbook Pro from 2012 (with a 2.6 GHz Intel Core i7 Processor) and was attempting to update OS X (I think Version 10.8.5).
    Many thanks for your message.

  • After deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

    after deleting i tunes because of an error when updating, i cannot install 10.6 on my win vista laptop. when i select download, it loads for 3 secs then displays... thankyou for downloading but nothing has happened

    Try downloading it with another browser.
    If that doesn't work, try following along with this Apple article -> iTunes: Downloading iTunes for Windows using Internet Explorer

  • R6034 error when updating

    hi guys,
    i have this error when updating itunes any advice.
    Running Windows 7 Home Premium.....
    Microsoft Visual C++ Runtime Library
    Runtime Error!
    Program: C:\Program Files (x86)\iTunes\iTunes.exe
    R6034
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    Any help would be appreciated....

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • ITunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25

    iTunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25.
    Downloaded latest version onto desktop. Will not complete install.

    Many thanks.
    Let's try the following user tip with that one:
    "There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

  • Installation error when installing CS6 on Mac?

    I keep getting an installation error when I try to install CS6 on my Macbook Pro. It says "installer failed to initialize, this could be due to a missing file". It also shows troubleshooting tips. I have tried them and none of them work. I also tried disc repair and multiple other troubleshooting advice from this site. Nothing has worked yet. Help!

    does your macbook meet the system requirements:
    Mac OS
    Multicore Intel processor with 64-bit support.
    Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems. Refer to the CS6 FAQ for more information about Mac OS X Mountain Lion support.**
    4GB of RAM (8GB recommended)
    15.5GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
    Additional disk space required for disk cache, preview files, and other working files (10GB recommended)
    1280x900 display with 16-bit color and 512MB of VRAM; 1680x1050 display required and second professionally calibrated viewing display recommended for Adobe SpeedGrade
    OpenGL 2.0–capable system
    DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
    Java Runtime Environment 1.6
    Eclipse 3.7 Cocoa version (for plug-in installation of Adobe Flash Builder; the following distributions are supported: Eclipse IDE for Java EE and Java Developers, Eclipse Classic, Eclipse for PHP Developers
    QuickTime 7.6.6 software required for QuickTime features, multimedia, and HTML5 media playback
    Dedicated GPU card recommended (for optimal performance in SpeedGrade and for GPU-accelerated features in Adobe Premiere Pro and After Effects: NVIDIA Quadro 4000 or other Adobe-certified GPU card with at least 1GB of VRAM recommended); visit www.adobe.com/products/premiere/extend.html for supported cards
    Optional: Tangent CP200 family or Tangent Wave control surface for SpeedGrade
    Optional: 7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended) for video products
    This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
    if so, attach a screenshot of the error.

  • Oracle 11G database for 64 bit windows installation error

    Hi,
    I downloaded the 11G 64bit for windows and unzipped the files into one folder and ran the setup.exe as an administrator. It opened up the java screen and I chose, create and configure a database. Next screen I chose, Desktop Class, when I click next it dies. It does not show me teh next screen. I went to the appdata folder and saw this error but not sure what to do EXCEPTION_ACCESS_VIOLATION (0xc0000005). Please help. Thanks for your time and help.

    Adipur wrote:
    Hello, have you tried to create new administrator user, and install using that newly created user...?You found this to be a band-aid solution in your specific instance. (Strange case of installation on windows 7 - unable to complete installation But you have drawn the wrong conclusions and never found the real issue in the cited thread. Under the circumstances, I would not be offering this up as a generalized solution, as you are doing in this thread and in others:
    Re: Oracle 11G database for 64 bit windows installation error
    Re: Trouble installing Oracle Personal in Windows 7 64-bit environment
    I have been doing Oracle DBA work since v 7.3, and have never seen advice like this to be anything more than a work-around the real issue.
    Edited by: EdStevens on May 15, 2013 7:03 AM

  • When updating to  itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.

    When updating to  itune 10.5 I get this error message ,older version of bonjour can not be removed, and older version of apple mobile support cannot be removed, any one know how to fix this.

    1) The older version of Bonjour can not be removed. Contact your technical support group.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

  • I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101

    I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101.
    My OS is Windows Vista and using Internet Explorer

    I keep getting the same error when connecting to itune for either update or download. error is we could not complete your itunes store request error 0x800B0101.
    My OS is Windows Vista and using Internet Explorer

  • Error when updating HANA Live Authorization Assistant

    Hi Guys,
    I'm trying to use the HANA Live AAA component for the creation of HANA Roles and it works fine when trying to generate the roles but it throwing me an error when updating them. The error happens at the beginning when the plugin attempts to load the Users from ECC. The message is:
    SAP DBTech JDBC: [1300]: fetch returns more than requested number of rows: [1300] "_SYS_BIC"."sap.hba.tools.auth.db/GetUsers": line 20 col 1 (at pos 1770): [1300] (range 3) fetch returns more than requested number of rows exception
    Anyone has gone through this error before??
    Thanks!
    Cheers.

    Ok Guys. No answer to this just yet.
    We decided not to use the tool and build our security with HANA security functionalities. It takes a bit longer but It's more robust in the long run in terms of maintenance.
    Cheers.
    Christian.

Maybe you are looking for