Vista 64 - X-fi Xtreme Audio and Fatal1ty headset problem

Hi All,
I bought a Xtreme Audio soundcard today, and found a problem.
When I connect my headset with the front connection on my PC -> no problem
when I connect my microphone with the front connection on my PC -> no problem, mic is working.
When I connect them both, the microphone isn't working.
To fix it, I have to disconnect my headset
Is this a known issue ?
Or is there someone who can help me ?
regards,
Corn

*second bump*

Similar Messages

  • SB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!

    JSB Xtreme Audio Notebook optical out problem with Home TheaterSystem-HELP!, I have this sound card connected?(optical OUT) ?to my home?theater system's digital IN ?through the recommended /8in. optical miniplug-to-optical SPDIF cable. Theater system is set correctly to Digital-In mode. I have no sound!
    The cable is a Velocity Toslink-to-Optical Mini Plug digital cable. I don't see any settings in the Creative Console Launcher. The notebook is a Dell XPS M730 (Vista 32).
    I have a PS3, DirecTV, and the SB Xtreme Audio Notebook cable on a hub switch that connects to the system's?one Optical IN. The PS3 and DirecTV sound perfect!
    The sound card works fine with standard PC speakers. I'm at a loss as?to what to try next. I set this whole system up myself, so I'm pretty good at working out the kinks, except this one!
    Karen

    OK. I just went to Control Panel - Sound - Playback - Digital Output Device (SB Xtreme Audio Notebook) - Properties - Advanced. I experimented with different sample rates and bit depths. Clicked the test button and lo and behold - sound from the HTS! I've tried iTunes, PowerDVD (configured to digital output) and YouTube - no sound! Am I missing something really obvious?
    HA! Just backed out to Playback and selected Digital Output Device (SPDIF) and set as Default. Sound is emunating from HTS! Well, that mystery is solved! Who knew.
    Thanks anyway! Any comments or advice will still be appreciated.

  • Hp pavilion g6-1326sl not work the audio and microphone headset

    Good morning ,
    I have a problem on my notebook hp pavilion g6-1326sl . It does not work the audio and microphone headset .
    I tried to format the computer and reinstall the operating system win 7 , both 32 and 64 bit ( one installed ) . I tried using the drivers from the HP website , IDT audio driver High - definition ( HD ) 6.10.6341.0 rev . But the loudspeakers of the PC are combined with headphones ( loudspeakers / headset ) .
    The reproduction of the sounds takes place together , and inserting the headphones do not come off the speakers pc .
    In addition skype does not work in any way , selecting any internal and external microphone , using headphones and without .
    You know help me to solve the problem ?
    thanks

    Hi @twin1981 ,
    Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP Pavilion g6-1326sl Notebook and issues with Skype and a Headset. Here is a link to troubleshoot Headsets in Windows 7.
    What is the Manufacturer of the Headset?
    Here is a link to Skype help under the Technical issues.
    I hope this helps.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • XFI PCIe Xtrem Audio and Vista 64 b

    I want to ask you guys a question, worked ok With the 4Gb memory On Vista 32 all are good, this card are a little crippled from Creative , but i dont complained. This card sound just like Extrem Audio PCI, or like SB li've 24 or AudigySE with modded into Daniel driver Xtrem Audio.

    Hi,
    This forum is intended for user interaction. Although the Forum is moderated by Creative employees who may provide answers to some questions, the moderators onboard are not here to provide direct support for your Creative products. If you require immediate assistance, you will need to contact http://forums.creative.com/showthread.php?t=4

  • Soundblaster X-fi Xtreme Audio and ALch

    I bought a Soundblaster X-fi Xtreme Audio soundcard to go with my new computer as I have always used Creative and have been impressed by them. However, in Vista, my rear speakers do not seem to work. I did some research and found that ALchemy was what I needed, but I cannot get this to install. It gives me the error message that my card isnt supported. Is there any workaround for this? I feel pretty miffed having an X-Fi card and being excluded from proper sound in Vista.

    There is a very good reason why it tells you your card isn't supported, that's because it isn't,?This download?is an?application for Creative Sound Blaster? X-Fi? series of audio devices. It restores 3D audio and EAX? effects for certain DirectSound?3D games in Microsoft? Windows Vista?. For more details, read the rest of this web release note.
    This download supports the following audio devices only:
    Creative Sound Blaster X-Fi Elite Pro<
    Creative Sound Blaster X-Fi?XtremeGamer Fatalty?Pro<
    Creative Sound Blaster X-Fi Fatalty<
    Creative Sound Blaster X-Fi Platinum Fatalty Champion Series<
    Creative Sound Blaster X-Fi Platinum<
    Creative Sound Blaster X-Fi XtremeGamer<
    Creative Sound Blaster X-Fi XtremeMusic<
    ?Alchemy was written to translate DirectSound3D software calls to OpenAL hardware calls, and unfortunately the Xtreme Audio doesn't have the hardware, the EMU20K2?(all that card basically is is a renamed SB Li've 24 bit/Audigy SE, neither of which have the hardware either).

  • X-Fi Xtreme Audio and no sound

    This is really getting annoying. I had a X-Fi Fatality FPS before (which had no optical on the back), and then i bought a X-Fi Xtreme Audio.. but.. The mic just doesnt want to work. I connect the mic jack to the only input there is - where the mic icon is aswell - and.. nothing.
    The mic is enabled in windows, but it sees the input as Line-In, and not microphone!
    Im using this driver: XFXA_PCDRV_LB__04_0000
    How do i get this working? (The mic isnt broken)

    Got it fixed. The newest driver supplied by Creative, doesnt have the "Creative Console Launcher" - which means you cant switch the mode of the FlexiJack.
    Good job Creative.........................

  • X-Fi Xtreme Audio and optical in (win

    hey, i bought an x-fi xtreme audio specifically so i could hook up my xbox to my computer speakers through my sound card via an optical cable.
    I hooked everything up, but i dont see any option in audioconsole to let me have my computer recieve audio through the optical input, decode it, and output it through my speakers.
    I hear theres supposed to be some sort of digital i/o tab, but there is none.
    these?are the tabs?i?have?in audioconsole:
    X-Fi Crystalizer | Headphone detection | performance | restore defaults | device information | speakers | eax efefcts | X-Fi CMSS-3D?
    any?help?on?this?would be greatly appreciated.

    i found a simple workaround for my problem.
    I uninstalled all the creative drivers and software, then disabled the card from teh hardware menu. i enabled onboard sound in teh bios and installed the drivers that were on my motherboard disc, and the line in worked fine right off the bat.
    im?a long?time?customer?of creative ever since my?first sound?blaster 6?and?i?would?have sworn by?all?their?products, but?the?last tow sound cards?i've gotten from them,?the?audigy?4?and?this xfi?have given?me?nothing but problems. ?now i see what theyre doing, not supporting windows xp anymore, and im?now done?with creative for good.
    bye.
    Message Edited by DavyC42 on 05-4-2008 08:26 AM

  • X-Fi Xtreme Audio and A

    Hi. Does Xtreme Audio support Creative ASIO drivers for low latency recording?

    Never seen mentioned it would ... asio4all driver should work w/ this model too.
    jutapa

  • Premiere Pro CC 2014 QuickTime Audio and Video Syncing problem

    Hi everyone,
    I am having and issue when I import QuickTime video into Premiere Pro CC 2014. I've just started doing some editing so I am very new to all of this. I recorded video in Photo Booth on my mac. I exported the file to a .mov file and imported it in to Premiere. When I play the file in premiere everything is fine up until halfway through the video. The video starts to play faster than the audio and everything is off. When I play the video in QuickTime everything is fine. I don't know if I did something wrong when I imported the file but I am hoping for some help. Thank you.

    I would be willing to bet the video is recorded as VFR, variable frame rate ... in other words, it creates more frames per second when it needs to for keeping up with screen changes, and less when it doesn't see much changing on your screen. This saves bandwidth of course, BUT ... PrPro is not setup to work well with VFR footage, it really needs CFR, constant FR. So ... highly recommended if your capture program doesn't allow setting CFR is the free program "Handbrake", which you can google for. Use that to convert the footage to CFR, then import that into PrPro.
    Neil

  • 945 PL Audio and Network intermittent problems...

    Hello,
    Hopefully someone can help me here. I recently built a comp for a friend with a 945PL Mobo and a dual-core 2.66 Ghz processor. Everything is fine, except that the audio sometimes works, and sometimes doesn't. This includes when I disable the onboard audio and switch to a 3rd party card. Also, I have hooked the comp up to my network in order to update windows, and everything worked fine, except for the fact that with each restart, I had to unplug the network cable and plug it back in.
    I have reinstalled both the audio drivers and the drivers for the network card, as well as disabling/uninstalling the components and then reinstalling them.
    Currently, the audio is working again(had ONE instance where it wasn't working, and I went to log out, and it started working again...). Usually, it will work for a minute or two, and then stop, with NO errors.
    Unfortunately, the network card just keeps trying to establish a connection, so I can't get the comp online to update anything.
    I have also tried flashing the BIOS, except that I can't get it to work for some reason. I followed the instructions provided here, but the BIOS utility doesn't seem to want to run. Maybe I'm missing something.
    If anyone has ANY idea what might be going on, it would be GREATLY appreciated!!
    This is driving me nuts, and also making me look like a moron to the friend I built the computer for.
    Thanks!!
    Mike Wells

    "What's your full system build? Please list out."
    Sorry for the slow reply, I've been seriously busy...
    System:
    945 PL Mobo
    2.66 Ghz Dual Core P4 Processor
    1 Gb Crucial DRAM
    Radeon X550 PCI Express Video Card with 256 Mb RAM
    Maxtor 250 Gb SATA HDD
    Sony DVD-ROM
    Pioneer DVD Burner
    Cooler Master Case
    Thermaltake Typhoon cooler
    Audio and Ethernet are both built in.
    I have updated the audio, the ethernet and the INTEL drivers, still no luck. The network card continues to try and get on the network(Funny thing, I can access my router, but even if I hook straight up to the cable modem, it never accquires an address.). The audio worked MOST of the weekend, but it still stopped working on two occasions. I left in on for hours at a time, I restarted a million times, I even played full CD's to see if there was any pattern to the audio issue, nothing seemed to show up, except that it doesn't go out while playing something...
    Hope this helps.
    Does anyone think that this could be a Windows issue, even though putting in another souond card didn't help? I haven't installed so much software at this point that a re-install would be too much of a pain in the butt...
    Once again, thanks for helping.

  • Audio and video sync problem

    Hi,
    I have a problem with audio and video synchronization. I'm using Merge class to merge video and audio tracks. But audio track can be shorter then whole video track (for example video length: 2 min., audio length 1 min.). When I merge them everything is OK. After that I'd like to concatenate more tracks (generated from merge) into one final video file. For this purpose I'm using Concat class.
    But here is the problem, after I concatenate all these tracks then the result video is OK but audio is synchronized right after the previous audio track ended. (If I have video1- 2min. audio1 - 1min., video2 - 2min., audio2 - 30 seconds, then second audio2 starts in 1,30 min right after the first audio track. But I want to start it when the second video2 starts.) Do you have any ideas??
    Merge class http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/Merge.html
    Concat class http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/Concat.html
    Thanks for help in advance.

    Ok thanks.
    I tried to implement PullBufferDataSource and everything went ok, the audio .wav file was generated, but when I run that file, the length is 0 and not the lenght I wanted (40.00). Where can be a problem?
    Here is the code I wrote/changed:
    TimeDataSource tds = new TimeDataSource(40.00);
    Processor p;
    try {
        System.err.println("- create processor for the image datasource ...");
        p = Manager.createProcessor(tds);
    } catch (Exception e) {
        System.err.println("Yikes!  Cannot create a processor from the data source.");
        return false;
    }I set content type to WAVE:
    // Set the output content descriptor to QuickTime.
    p.setContentDescriptor(new ContentDescriptor(FileTypeDescriptor.WAVE));I use DataSource as the next:
        class TimeDataSource extends PullBufferDataSource {
                     private double duration;
                     TimeSourceStream streams[];
                     public TimeDataSource(double duration) {
                      this.duration = duration;
                      streams = new TimeSourceStream[1];
                  streams[0] = new TimeSourceStream(40);
              @Override
              public PullBufferStream[] getStreams() {
                   return streams;
              @Override
              public void connect() throws IOException {
              @Override
              public void disconnect() {
              @Override
              public String getContentType() {
                   return ContentDescriptor.RAW;
              @Override
              public Object getControl(String arg0) {
                   return null;
              @Override
              public Object[] getControls() {
                   return new Object[0];
              @Override
              public Time getDuration() {
                   return new Time(duration);
              @Override
              public void start() throws IOException {
              @Override
              public void stop() throws IOException {
        class TimeSourceStream implements PullBufferStream {
                   private AudioFormat format;
                   private boolean ended = false;
                   private long duration;
                   public TimeSourceStream(long duration) {
                        this.duration = duration;
                        format = new AudioFormat(AudioFormat.LINEAR, 8000, 8, 1);
              @Override
              public Format getFormat() {
                   return format;
              @Override
              public void read(Buffer buf) throws IOException {
                   buf.setDuration(duration);
                   buf.setFormat(format);
                   buf.setEOM(true);
                   buf.setOffset(0);
                   buf.setLength(0);
                   ended = true;     
              @Override
              public boolean willReadBlock() {
                   return false;
              @Override
              public boolean endOfStream() {
                   return ended;
              @Override
              public ContentDescriptor getContentDescriptor() {
                   return new ContentDescriptor(ContentDescriptor.RAW);
              @Override
              public long getContentLength() {
                   return 0;
              @Override
              public Object getControl(String arg0) {
                   return null;
              @Override
              public Object[] getControls() {
                   return new Object[0];
        }Edited by: mako123 on Feb 22, 2010 2:18 PM
    Edited by: mako123 on Feb 22, 2010 2:23 PM

  • Audio and video sync problem using itunes player

    When I play a movie using itunes it starts out okay but after a few minutes the audio and the video are no longer in sync. Anyone have a solution for this problem
    Dennis

    I have the same problem.
    Motherboard: Gigabyte GA-MA785GPMT-UD2H
    Chipset:
    North Bridge: AMD 785G
    South Bridge: AMD SB710
    Video: Integrated ATI Radeon HD 4200
    HDMI Audio through the HDMI out port to one of the TV HDMI in port.
    Tried on Windows 7 Pro 32bit and Windows 8.1 Pro 64bit.
    Tried with the integrated ALC889A audio device enabled and disabled (It seems that the video card drives the HDMI audio device, because it still appears in Windows even if I disable the Audio device in BIOS).
    Latest iTunes and drivers installed.
    Apple, any suggestions? I'm not having a great customer experience after buying a pair of HD movies in iTunes.

  • K9A2 Platinum Audio and Video Driver problems.

    I put together my new rig last night and am having a lot of problems with drivers.  The rig installed windows XP SP2 in about 10 minutes though   
    Rig:
    MSI K9A2 Platinum Bios 1.3
    Phenom 9850 BE
    G.SKILL 1066 5-5-5-15 2T
    MSI HD 3870 OC
    WD Raptor
    CoolerMaster 550watt
    Several fans to keep cool air flowing.
    My problem is that I can not find good audio or video drivers.  I started by trying the audio drivers included with the board, but they would not complete the install.  I ended up downloading audio drivers from the MSI site, however they also would not install with the "#-0001" error message.  I followed the instructions on the forum: https://forum-en.msi.com/index.php?topic=115396.msg866810#msg866810 including installing the MS HD Audio Driver Hotfix but still cannot get sound working.
    To further complicate my problem the 3870 has HD onboard, which makes a second instance of Microsoft UAA HD Audio driver in the device manager, and also tries to find drivers for bits of it's audio hardware.
    Currently I have disabled on-board audio completely through the bios, and now everytime I boot-up I get new hardware found for UAA HD Audio, and also some Media interface.  Clearly this is the HD on the 3870, however I can't seem to get drivers installed that will agree with the hardware thus the message continue to pop-up!
    Does anyone have suggestions or similar experiences?

    Quote from: AMDloyal on 24-April-08, 09:56:10
    Thanks for the links. 
    The standard AMD ATI Drivers + South Bridge chipset drivers worked flawlessly.  I've made a clean run through 3dmark06 so i feel good about them.
    As for the audio.
    I've worked through both of those suggestions but haven't gotten anywhere.  A few times I have been able to get the drivers to install without the "error code -0001" message, but that doesn't give me sound.  Under device manager I still end up with yellow exclamations.  It seems no matter what I disable or try to do nothing works.  I've tried updating drivers manually like was explained in the first link, but when the update is complete I get the messages lile: "There was a problem installing this device  MEDIA  An error occured...  The data is invalid"
    Does anyone know if this indicates a hardware of driver problem?
    "Thanks for the links. 
    The standard AMD ATI Drivers + South Bridge chipset drivers worked flawlessly.  I've made a clean run through 3dmark06 so i feel good about them."
    you are done well.
    As for the audio.
    I've worked through both of those suggestions but haven't gotten anywhere.  A few times I have been able to get the drivers to install without the "error code -0001" message, but that doesn't give me sound.  Under device manager I still end up with yellow exclamations.  It seems no matter what I disable or try to do nothing works.  I've tried updating drivers manually like was explained in the first link, but when the update is complete I get the messages lile: "There was a problem installing this device  MEDIA  An error occured...  The data is invalid"
    Provide screenshot from Device manager.

  • X-Fi xtreme audio and vista 32bit - bass redirect

    hi,
    i have
    -x-fi extreme audio bulk (PCI)
    -vista 32bit
    -Teufeln Concept E? 5. surround set (connected via analog)
    i can install the latest drivers and audio console, but the graphical console
    ("C:\Program Files\Creative\Sound Blaster X-Fi\Console Launcher\ConsoLCu.exe")
    will fail to start with a message saying the device is not supported.
    the audio console which comes with the driver
    ("C:\Program Files\Creative\AudioCS\CTAudCS.exe")
    does work but lacks one important function, the bass redirection (crossover frequency).
    is there anyway to set this option or is there a driver combination for my hardware allowing me to launch the graphical audio console (where i know u can set this option)?
    thx in advance
    Apfelstruhdl

    Do you have original CD from your bulk card (SB0790 oem bulk)? My is somewhere lost and there is no chance to install full packet of ap
    ps.
    Two weeks of searching any user, what can help me - without luck... With basic driver, as you wrote, there?s no function of bass redirection. Is Creative lazy or crazy?

  • X-FI Xtreme Audio and Windows 7

    Driver is not working properly.
    As oposed to WinXP driver (on disk) there is no console application.
    In Audio Control Panel I found all necessary settings, but it seems they are not working at all (such as Crystalizer, Surround Xpand and other).
    And also now I can't use Bass Redirection setting.
    How I can solve this problem?
    And when Creative create normal driver and applications for Win 7?

    ?GURU, I`m having issues with the Windows7 also in the install of Audigy2ZS. I`ve had this for three years and worked fine, yet I did a new update with the old Artificial Intelligence mother board, burt out on me. That could be it. ? Since updating the software in autoupdate for Audigy2ZS and the Windows 7 may be the issue I`m getting... SPI(Creative X_Fi Module) Problem... when I install the CD from Creative Soundblaster Audigy 2ZS? . Lost. Uninstalled it several times and no go. The Itunes works ACE with the Audigy2ZS, Go figure?
    Any clues?

Maybe you are looking for