Vista and iTunes shared library - Admin vs. Standard User

Here's a good one.....I am the administrator of the family's Vista desktop computer, my kids are Standard Users. When I log in to the computer and bring up iTunes, I am able to see and access our shared library of music on our Synology DS207+ NAS. When either of my kids log in and bring up iTunes, the DiskStation appears on the left side underneath 'shared' but when they click on it, they are not able to access the music. A dialog box appears with the following message: 'the shared library "Disk Station" is not responding (-39). Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689.'
Their Standard User accounts can access the music on the NAS through mapped drives and windows explorer.
I am running CA (Computer Associates) Security Center and the firewall has the same rules in place for all of our logins. Here is the strange thing, when I change their account type from Standard User to Administrator, they are able to access the shared library of music, no more dialog box with that message. I change their account type back to Standard User and again, they are not able to access the music, and they get that message again.
When I am logged in and enter the 'netstat' command, I see the following entry under foreign address:
NAS:3689 Established
When the kids are logged in, I see the following:
NAS:microsoft-ds Established
I've tried a lot of different things, too numerous to even remember or mention, all with no success. Some troubleshooting measures include:
- change the kids permissions to the music folder on the DiskStation from read only to read/write.
- disabled (not uninstalling) tcpip v6.
- tried every combination of new firewall rule, to include ports 3689, 5353 and every port (and range) in between.
- file and printer sharing is off on the administrator account, and is off on the standard user(s) accounts, but enabling it does not allow access to the library.
- uninstalled Bonjour but once I do that, I cannot see the shared library anymore.
- upgraded Bonjour to the latest version but still no success.
If anybody reading this has other suggestions, please respond.

I actually followed this, but I still had problems that I listed above. Is there any way that when you make changes to one account (even if there is only one main account where changes are made), the changes are automatically (or at least easily) applied to the other user accounts?

Similar Messages

  • Iphone and iTunes shared library

    I have a NAS drive with my iTunes music on it at home. Will an iphone be able to pick it up via Wifi. Does "shared libraries" work on iTunes on iphone ?

    It will not share libraries via wifi, and the iPhone can only be used with a single library at a time.

  • Is there a way to have two iTunes music libraries: a library on my computer and a shared library on a NAS server (cloud box)?

    I would like to know if I can have two iTunes music libraries: a library on my computer and a shared library on a NAS server (LaCie CloudBox). I want to have some music files on my computer and a larger collection of songs with cover art on a shared CloudBox (NAS server) so that also my family members can listen to the music on the Cloudbox. Is there a way to do this?
    I know I could just copy the music files to the CloudBox, but that way only the songs are shared, not the cover art. I could also just keep the files on my computer and share the library via home sharing, but that way my computer would have to be always on. So is there a way to have a shared library on the cloudbox that works regardless of my computer being on or not?
    Thanks,
    Jay

    Try homesharing. I am not sure if this will keep them seprate but this is really close to what you are looking for.http://www.apple.com/itunes/inside-itunes/2010/01/sharing-itunes-libraries-at-ho me.html

  • Itunes Shared Library between Mac and Windows isn't sharing videos properly

    Hi, I'm a bit new to the mac world, but I'm the proud owner of a new macmini. I also own a Windows 7 machine.
    My problem is with the Itunes Shared library. Itunes 10 on my mac is set up to share everything, including podcasts. I can see these from Itunes 10 on Windows, and I can play music (and audio podcasts), but video is hit or miss.
    Videos downloaded from Itunes U tend to work, lectures and stuff.
    Video podcasts (also downloaded from Itunes Store) and other videos don't work at all. Itunes just doesn't play the video, and doesn't even launch the "black screen". The timer remains at 0.00.
    On the other hand, sharing videos from the PC to Mac works well, i.e. my mac can see the contents of the itunes shared library on Windows and play videos. It just doesn't work the other way around.
    Thanks for reading and I hope this problem can be fixed.

    Woops!
    Here you go:
    http://discussions.info.apple.com/message.jspa?messageID=10923818

  • HT5922 Volume control Itunes Shared Library from Macbook air played through iPad

    Hi everyone,
    I am using iPad Air to airplay through use of iTunes shared library from Macbook, to Play to my Apple TV using the Remote App from apple on the iPad.
    I noticed that the swipe up control screen volume control does not affect the volume on my speakers of the Denon which is perfectly connected with apple tv. The only thing which controls the volume is the Denon volume control.
    The iTunes  volume control on the Macbook also do not work with Apple TV when airplaying
    I assume this is because of the Denon Reciever, but would like to hear if others who are connecting directly without a multimedia amplifier and speakers are also unable to raise volume using itunes control or not?
    Thans in advance for any feedback given.

    Timerift wrote:
    When I try to play a song though it just starts skipping to the next song and then the next one.  Unless there was a song local on the machine it just keeps skipping to the next and to the next.
    I think this may be a clue to the problem. When you purchased the MBA did you restore any of your personal data from a prior backup? In particular, did you restore any prior data in the Music folder?
    Or, did you simply launch iTunes and enable iTunes Match?

  • Tracing iTunes Shared Library

    Hello Apple People,
    Im managing a large number of apple computers, and have recently noticed that some clients have some questionable material that they are sharing in their iTunes library.
    I was wandering how do you track down the user who is supplying the shared library. I have started scanning Port 3689, which allows iTunes sharing between Macs, but if there is some temporary file being stored somewhere that gives perhaps an MAC address, or even an IP, that would be better.
    Thanks

    macmenno,
    I just read this post and I'm wondering if you can helpme in my problem - I'm completely stumped!
    Below is pasted from my post:
    "Apple techs, I've posted this topic before and no one has been able to solve - I believe it's a bug in the program.......
    All my macs are running 10.4.7, QT 7.1.3, itunes 7 (problem happened with QT 7.1.2, itunes 6.+)
    I'm sharing my itunes songs in my MDD G4(host). I access my g4's shared library from my other mac's either via ethernet or wireless (home LAN).
    I have discovered that I cannot play ANY songs that have been encoded as mp3 joint stereo. My mp3's were encoded this way because this was my previous itunes versions (itunes 3 I think) default encoding setting.
    When I access my hosts itunes shared library from one of my 'client' macs and view my mp3 joint stereo files, I first notice that they have a 'QuickTime movie file(remote)' in the Kind property list.
    They do not list this way on the host - they list on the host as MPEG audio file.
    Then when I try to play a mp3 joint stereo file, I get a short spinning rainbow, the song does not play and the play head just doesn't move.
    All other song files play, non-joint stereo mp3's, AAC, protected(purchased)songs, videos, etc.
    Apple itunes tech's PLEASE CHIME IN HERE - I need an expert to examine this issue, I haven't been able to figure this one out and I cannot share/play my music on to my other macs....
    BIG THANKS!"
    macmenno, I hope you can help - THANKS!!!

  • How can I see who uses my iTunes shared library?

    Is there anyway I can see who uses my iTunes shared library?
    I'm just curious because I am in college living in the dorms and I just was bored and interested.
    Thanks
    David

    Preferences - Sharing - Status: At least you can see how many users are connected

  • File and iTunes sharing doesn't work

    Hello,
    I have am trying to share files and an iTunes library from my Macbook Pro (Early 2008 model.)  Since upgrading to Mac OS X Mountain Lion, sharing of all kinds has been acting strange.  In other words, file and iTunes sharing from my computer can't be seen by other computers, but the reverse is not true.
    -- 1. iPhone remote app can't see my library: 
             While I can pair my iPhone with my iTunes library (iTunes 11) in the remote application, the Remote app simply says "Looking for..." without no name given for the library (on the remote app, the library shows up as a deactivated itunes logo with no name,) and then "Couldn't find ..."  i.e., it fails to find the library.
    -- 2. iTunes library can't be seen on other macs: 
              I activated home sharing on my mac and another mac (Macbook Air 2011 with Mountain Lion and iTunes 11), I also set my iTunes preferences to "Share music over local network."     While I can see the Air's library on the MBP, I can't see the MBP's library on the Air.
    -- 3. Shared folders can't be seen on other macs:
              I can see shared folders from the Air on my MBP.  But to connect to shared folders on the MBP from the Air, I must enter the exact address, since browsing for my MBP on the network shows nothing. 
    I have confirmed that TCP port 3689 is open on the MBP.   Firewall is off.  The local network in question is my cable modem connection (no router) which I am sharing from my MBP by WiFi .  I am running OS X 10.8.2, iTunes 11.0.1.
    I would appreciate any help anyone could give.
    Thanks

    And you are quite persistent, Menu Boy, in offering pernickety and pointless prattle, in response to a "support page" on iPad's buggy Pages App.
    Let's summarise, for those reviewing this threadless thread for app support..
    Mobile pages works reliably for simple docs, especially creating letters and Menus for Microsoft's Kindy canteen (even on special days with nice big pictures).
    When importing more complex docs and/or working with larger creations, it is prone to randomly corrupting files upon re-opening, along similar lines as Word (running on a PC).
    So, Menu Boy, do they let you sneak into classes every now and then? What is the secret to their training? "Say after me, if any I.T. product works just some of the time, that's a job well done, and if something randomly stops working, we call that the user's fault... And if they complain, we call them names."

  • Changing default directory for iTunes Library.itl and iTunes Music Library.

    I need to change the default directory for the files iTunes Library.itl and iTunes Music Library.xml permanently.
    It must be relocated from the My Documents directory due to VPN reasons.
    Has anybody an idea if this is possible? I could not find a corresponding registry entry.
    Notebook Windows XP Pro

    Using TweakUI to Move or Create Your Library/My Music Location
    Use TweakUI (See: ’Disk is locked’ or ‘iTunes folder cannot be found’ when installing or opening iTunes ) to create a 'My Music' folder in a spot where you desire. iTunes should then find this location and deposit its Library files there, and the 'iTunes' folder and sub-folders as well (if you direct it to).
    First, see this Article for some background information: What are the iTunes Library files?
    If you cannot see the ‘My Music’ folder within the TweakUI drop-down selection, proceed on to the following:
    1 On the start menu go to ‘Run’
    2 Type in RegEdit
    3 Navigate in RegEdit to HKEYCURRENTUSER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders
    4 Delete any entry for ‘My Music’
    5 Navigate up the tree to HKEYCURRENTUSER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders
    6 Make sure there is an entry for ‘My Music’ and is pointing to C:\Documents and Settings\[username]\My Documents\My Music (you can edit the value by double clicking it)
    7 Close RegEdit
    8 Reboot
    iTunes &/or TweakUI should now be able to find the folder.

  • Admins became Standard Users with Leopard... also Safari doesn't work

    I loaded Leopard on my wife´s iMac 1.83 and it says Safari does not work with that version. When I went to reinstall the OS as recommended in another post, it requires an Administrator to proceed. But my wife and are now both listed as Standard users instead of Admins like we were before in Tiger. Needless to say I am very concerned we are locked out and will lose everything which will be a complete disaster.
    Help please.

    As far as the admin>standard user problem goes, this article should help.

  • Help with iTunes Shared Library (Vista and OS X)

    I am trying to share my Vista-based iTunes library with my new iMac. I have an issue now that iTunes does not let me select the shared iTunes library that resides on the PC. The following is how things are set up
    1) I've moved all of my PC-based music, my iTunes Library (.itl) file and the cover art to an external HD on my Vista PC.
    2) I've set permissions on all of the Vista files (music, library, art) to be read/write for available to all connected users.
    3) I have also mounted the PC-based external drive on my iMac. Permissions seem to be ok, as when I view files via the Finder, they are visable and accessible.
    4) However, when I try to open iTunes on iMac to change the shared library (using the OPTION key), the iTunes Library.itl file on the hard drive is completely greyed out. No matter how I change permissions or sharing on the Vista machine, I cannot seem to select the shared library.
    5) Interesting that I HAVE successfully accessed the same library through another Windows-based machine (Windows XP). In that instance I can access the network drive and select the iTunes Library.itl file no problem. Music streams fine after I do that. Also, from my iMac I am able to create files in the same directory where the iTunes files reside (using program like Text Editor) so it seems I do have write access and permissions to the directory.
    Any clue why this is happening? It seems like iTunes is the one program that is not picking up the permissions from the iMac, but other Mac programs are. It's driving me a little nuts at this point. Any help would be greatly appreciated.
    Thx

    Bump. Same issue. Help please.

  • How I fixed lost airtunes and lost shared library

    It happened to me over and over again. Sometimes it helped to restart AirPort Express, sometimes it didn't. Sometimes it helped to remove the preferences of iTunes, sometimes it didn't.
    What helped me this time (and this was the fastest solution so far):
    I KILLED the mDNSResponder process in the Activity viewer. You will need to enter your Admin password as this process is owned by root.
    But on my machine it immediately brought back my Airtunes menu with my speakers in the living room and on other computers I could immediately see again the shared library.

    and I can confirm this REALLY works!!!
    I just now tested: AirTunes was grayed out (remote speakers could not be found)
    I killed mDNSResponder
    restarted iTunes
    voilà it's working
    for UNIX geaks:
    use:
    grep -aux | mDNS
    and then
    sudo kill -9 (id of the task, second column)
    Michael

  • Spotty iTunes Shared Library Connection

    I continue to have problems sharing my iTunes library between my PC and laptop (both Dells with Windows Vista). My entire collection is on my PC, but I prefer using my laptop as a mobile music library. However, at random times my PC library disappears from the "Shared" list in iTunes on my laptop. My anti-virus is set to allow port 3689 & most of the time it works fine. I am just wondering why I can not keep my connection consistent.

    I have the same problem. Very inconsistent sharing, I have tried it between 3 computers. An old Dell laptop running XP, a 15" MBP running leopard, and an old 15" Powerbook G4 also running leopard. Sharing works fine between the Macs, but I can't get anything to work reliably between the PC and either Mac. I'm using iTunes 8.2.1 on all 3 machines. I tried reinstalling bonjour and iTunes on the PC with no luck. Also checked the firewalls, etc. and everything should be open for iTunes sharing. I've had this issue for about 6 months and I keep hoping the next iTunes release will fix it. My faith in Apple's "it just works" mantra is beginning to wear thin...

  • A Troubleshooting Guide for Windows Vista and iTunes 8 - user supported

    ITunes 8 and Windows Vista can be an explosive combination. Having helped to troubleshoot some problems for people, I decide to consolidate my information all down to one post. The information comes from various sources, and I will try to annotate where it came from. Please let’s keep this a solutions listing post. So people can come to it when they have a problem and easily find a solution.
    *ITunes will not install:*
    ITunes will sometimes not install or the installation will hang up under Vista. First I will give some generalized steps to take in order of priority, and then get into some specifics.
    General
    *1. Turn off your Anti-Virus Software.* Some A/V software will prevent the installer from accessing the Windows System Files causing the install to Bork.
    *2. Uninstall third-party Audio-Video Codecs.* Installing iTunes also installs Quicktime which installs the necessary codecs to play its supported files. Some codec packs, such as DivX and XviD have the ability to read these files, and their method of decoding these files can cause conflicts with the Quicktime installation. Even third-party CD Burning (Roxio, Nero, and the like) software can cause this problem. Once iTunes is installed, you can reinstall these codecs without any ill effects.
    *3. Disable Windows Defender.* Windows Defender is a resident A/V type program native to Windows Vista. It can also sometimes cause conflicts during installation. To disable it, go to the Windows Defender tab in your Control Panel, and chose disable in the dialogue box.
    Specific
    *1. When I install iTunes, the installation stops and I get error message 2738.* This error message means that the Visual Basic Script is not being installed properly or it could be disabled. To fix this we need to re-initialize the Visual Basic Script server. Do the following:
    In the search panel of the start bar, type cmd.exe.
    When the search results are listed, right click on cmd.exe and select run as administrator.
    Type in the following at the command prompt: regsvr32 vbscript.dll and hit enter.
    Run the iTunes install program again.
    *2. ITunes installed properly, but now I am stuck in a reboot loop.*
    This behaviour is a known problem to Apple and they are working on it. What is happening, when you run the program, it is involking a repair check of your installation. Beaconfield came up with a work around to use until Apple patches the software.
    “Navigate to C:\Program Files\iTunes\ and right click on iTunes.exe then select Sent To > Desktop. This will create a new icon that should load iTunes just fine.”
    I know there are more issues out there, but these seem to be the most common. If anyone has anymore solutions, please add them to this post. Like I said initially, I would like this post to be an easy reference for troubleshooting.
    Thanks again,
    linesma
    Message was edited by: linesma

    Ok, so I saved my Windows Media Player playlist as M3U files and imported them into iTunes. Wow! What a complete mess that made of my library.
    All songs that were on the playlists (hundreds of songs) were duplicated in my iTunes library. iTunes would show two entries for each song. When I right clicked and choose 'Show in Windows Explorer' both entries point to the same song, it just shows up twice in iTunes.
    I cleared my iTunes library file and am starting over. I'm thinking about just going back to Windows Media Player. I've been listening to music off my Blackberry and it's really been fine. Just seemed a shame that my iPod was sitting in a drawer because of all the issues I'm having with iTunes and Vista.
    The original problem I had months ago was that iTunes crashed on Vista and lost all my Playlists. I was so upset I put all my music on my SD card on my Blackberry, because Windows Media Player makes it so easy to back up your playlists. They are saved as files and can be included in any automatic backups (I have scheduled backups to another hard drive)
    I thought with this new version of iTunes I could at least export the playlists to files so they can be backed up, I just don't know if I can face re-creating the playlists in iTunes.

  • ITunes Shared library with all users on one computer

    I am trying to share my iTunes (version 8.2) library with all the users on my computer. So far, this is what I have done:
    1) I have moved the music folder into the shared folder.
    2) I have selected "Add to Library" in all three accounts.
    3) I have tried checking and unchecking the "Copy files to iTunes Music folder when adding to library."
    Since then, I have added some CDs that had some songs that I already had. When I loaded these CDs, I deleted the duplicates that had the worse sound. Since then, everything is unwinding. The additions on one user account are not being added to the others. When I delete a track, iTunes (obviously) says that it can't find the song anymore. What's odd is that I then delete the one that is missing, and both are missing now: the one that I deleted on the original account and the one that I did not delete on the original account.
    I am starting to think that I need to start from scratch. So, to make a long story short (too late), how can I share my iTunes library with all users on one computer, where I can make a change in one account that will update automatically on the other accounts. If it can't be updated automatically, how can I add/delete files without causing the headaches I am currently having?
    Brian

    I actually followed this, but I still had problems that I listed above. Is there any way that when you make changes to one account (even if there is only one main account where changes are made), the changes are automatically (or at least easily) applied to the other user accounts?

Maybe you are looking for

  • IPhoto export broken?

    Since the Maverick updates, iPhoto "Export" no longer works. I can select a photo, go to the file menu, then select "Export" I still see the Export dialog window. However, when I click on the Export button, nothing happens. Has anyone else had this p

  • Custom scroll bar and image window

    Hi Guys! Im having trouble finding content on this, basically i want to create a window on my webpage that will scroll horizontally through a series of images, im guessing this may be done via javascript, does anyone know of any tutorials that may he

  • (No Sender) undeletable  message box

    iPhone4, in my pop account- Comcast. I have 2 messages(emails) that read (No Sender) This message has no content.. with a sub folder message or 3.... I am unable to open this email message and when I click edit there is no dot to check to delete... I

  • How-to remove application scope bean

    I've found the following snippets to get rid of a session bean (to have it removed / recreated): snippet 1: FacesContext      .getCurrentInstance()      .getApplication()      .createValueBinding( "#{yourBeanName}").setValue(FacesContext.getCurrentIn

  • FAGLB03 GL line item non-display of field (withtax base amount)&(withholdin

    Hi FI experts, We are having issue with FAGLB03 report, where we are not getting values in two fields "With tax base amount" & Withholding tax amount. Kindly let us if we have missed any config settings for the same. Thanx in advance Regards srihari