Vista audio bug with DivX AC3/5.1 surrou

Been trying the 2.3 release drivers with Windows Vista x64 and a Creative X-Fi Fatalty soundcard and noticed a problem with them and DivX files. If the file is using stereo sound, no problem - but if the file is encoded with AC3 / 5. surround then the audio stream doesn't play. Anyone else noticed this problem? Or got a work-around for this?Message Edited by ChasF on 0-24-200702:46 PM

Why did you post this in the LiveType forum?
I would recommending posting your question in the Final Cut Pro forum.
Have you tried trashing your preferences?
Anyways... here is a thread with a similar problem:
http://discussions.apple.com/thread.jspa?threadID=656515

Similar Messages

Audio bug with WAV files: use mp3, not wav for syncing long audio files

Just a tip:
I've noticed another audio bug in Presenter (including 7.05) but there is a workaround. I often export the audio as a single, long clip from pre-recorded lecture videos, and sync it with the powerpoint slides in Presenter. I've found it easiest to import the long audio file into the first slide, then sync using the Edit Audio window. I find that much easier to use than the Sync audio window.
However, If you use WAV format for the imported audio file, sometimes Presenter will simply refuse to play back anything beyond about 5 minutes into the timeline in the Edit Audio window. Nothing fixes it - restarting, re-importing, etc. However the problem goes away if you save the audio as mp3.
Ellen
http://thedesignspace.net

Why did you post this in the LiveType forum?
I would recommending posting your question in the Final Cut Pro forum.
Have you tried trashing your preferences?
Anyways... here is a thread with a similar problem:
http://discussions.apple.com/thread.jspa?threadID=656515

5.1.2 Audio bug with AIFF files

I've encountered a strange bug after upgrading to 5.1.2 today. I have 3 Macs with FCP (all upgraded to 5.1.2 today). Was working on a project at work on one of them today and everything worked fine. I imported an AIFF file and decreased the levels on it as part of the project.
When I brought my project home (I use hot swap hard drives), I went to adjust the levels of that same AIFF file within my project. However, the viewer pane went half black, it did not show me any bit of the audio file and it's peaks. However, I could still adjust the levels. It just seemed to be that there was some sort of video display bug when I tried to adjust the AIFF file in the viewer.
I looked at some other audio files (recorded through the voiceover control) and they appeared fine in the viewer. Only AIFF files gave me this bug. To try and remedy the problem I tried other AIFF files and also tried restarting the project, etc. Nothing cleared up this problem though. Anyone else experience this?
Ted

Why did you post this in the LiveType forum?
I would recommending posting your question in the Final Cut Pro forum.
Have you tried trashing your preferences?
Anyways... here is a thread with a similar problem:
http://discussions.apple.com/thread.jspa?threadID=656515

Vista 64, Latest Driver & X-Fi Elite Pro: Audio issue with Pro Evolution Soccer 2008 (Pes 20

Hi,i have formatted XP S.P.2 and now i'm using Vista Ultimate 64.I have got an X-Fi Elite Pro and i have installed all the applications using the CD-Rom.I updated the driver, Alchemy and Mediasource to the latest version.The system is totally clean and updated (I used Windows Update when i finished to install Vista and nothing was installed). I would like to know why i cannot play Pro Evolution Soccer 2008 like in XP: when i enter in the game i have a noise (looks like the noise of the needle in old gramophones...) and i cannot use the speakers (Creative ProGamer G500).If i turn the volume to 0 i can hear it too... i have to switch off the speakers or exit the game to delete it.Is it another bug I tried to uninstall and doing a new installation of the game but... no way men... Thanks p.s.After year and 4 months (release date of Vista) is it possible to have a decent driver... The Audio Quality in Vista Ultimate 64 bit is lower than in XP and the same wave files have distortion with the low and middle-high volume (60-70).
Problems that i have never had in XP... i cannot reinstall XP another time. I bought Vista in 2006 and i cannot use it till you'll release a good sw.
Have we to wait till 200 for a fuc.ing working driver
My Hw.: Intel Core 2 Quad 6600, DFI Lanparty DK, 2GB DDR800 Team Group, X800XT 52MB, Enermax Noisetaker 600W, Creative X-Fi Elite Pro, Creative ProGamer G500, Plextor PX76SA, Logitech G5 and G5.

The problem is now official: other customers have problems with some games (Pes 2008 and Crysis in particular). I'll show u the main italian hw. forum. There is a thread of more than 500 pages just about Creative X-Fi: http://www.hwupgrade.it/forum/showth...42043&page=550 I would like to know if u test drivers before sharing... because i don't know what you did in more than year.You should meditate, people... I paid more than 400 $ for an Elite Pro and after year and 4 month i cannot install Vista 64 too for audio issues with mp3-wave files and Pes 2008 or Vista 32 bit for problems with Pes 2008. This is my latest Creative product, you can trust.

Problems with 1.5 and vista - audio recording

Hello. I have PP 1.5. I have an Audio Techinca AT2020USB microphone. I have a couple different computers running 1.5 - The one that has XP as an OS, I can use the mic to record audio. On the computer that runs Vista, I can not. Is anyone aware of any patch or anything that will allow me to make this work?
Please, advise. Thank you.
bobhugejunk

YOU ARE THE MAN!!!! It took a little bit of working the configurations, but I got it to work....oh, me so happy...oh, oh, me so happy
Thank you!
Make sure you visit www.bobhughesmichigan.com for my music samples, schedule and video information!
Date: Wed, 21 Oct 2009 19:34:20 -0600
From: [email protected]
To: [email protected]
Subject: Problems with 1.5 and vista - audio recording
As Jim points out, CS3 was the first Vista-certified version, though many did get PrPro 2.0 to run on it.
Now, if PrPro 1.5 is running otherwise, you might have some luck with http://www.asio4all.com You'll need to download this freeware, install it, and then point PrPro to it in Edit>Preferences>Audio Hardware>Asio Settings for input and output.
Good luck,
Hunt
>

CS4 PPro Audio Bug???

This has to be an audio bug, right?
There is a "main" sequence consisting of 14 nested sequences. Each of the 14 nested sequences are a "target" sequence (Adobe help terminology) made by nesting a multi-camera sequence and going through the cut process.
When these 14 targets are made, the audio works.
Now, back into the main sequence, two of the 14 have no audio. Render Work Area and Render Audio do not help.
I went to the target sequence and its audio was now gone. So I tediously rebuilt the sequence and the target audio was now present. Went to the Main sequence and the audio was present.
But then I performed a Render Audio on the main, and immediately upon completion, the audio was gone!!!! Just for sequences 1 and 2 (the audio is still functional with the other 12 sequences).
I repeated the entire tedious experiment, and it happened a second time!!!
I compared the Sequence Settings of the working sequences and the non-working sequences, they appear to be identical.
(Vista 64-bit, quad, 12GB, blah, blah, blah).

What kind of media, what sequence settings?

.avi files and audio codecs with Quicktime and other software

Apple Mac OSX 10.5.8, Samsung LED TV, Video Camera saving movie files as .avi, audio codec unknown (G-Spot codec is not supported on the mac so I can’t check)
As a well retired non-computer savvy person I am very confused when it comes to talk about different video/audio codecs. I have read so many articles my head is now spinning with information I truly cannot understand.
Using the above hardware, when I play an .avi file direct from my camera onto my new TV I get a perfect picture but the TV tells me “the audio codec is not supported”.
I have tried, using Quicktime Pro and others such as AVCWare Mac Video Converter and Divx converter, to convert the .avi file with unknown audio codec to an .avi using mp3 codec. This is successful but the camera will not play the file and when downloaded onto a flash stick the TV now tells me “not supported file format”. The TV gives me a Divx registration and deactivation code but I am not sure whether this refers to the TV or the flash stick!
To keep things short, all I want to do is edit/crop .avi files from the camera, save with a readable audio codec, put the files into the TV using a burnt DVD or play direct using a flash stick. The TV supports among other video formats Avi, MKV, ASF, MP4, 3GPP and audio being mainly MP3, AC3, LPCM, ADPCM
Hope someone can help please.
Many thanks Robin Welch

Hi George,
Thank you very much for your last post. One small piece of information from you regarding frame size was the final part to my jigsaw. I recently purchased a new digital camcorder and LED TV and getting them to talk to each other has taken me since December! Having installed MediaInfo as you suggested, I found the camera saved the .avi files with AAC LC audio codec (first piece of the jigsaw). Talking to the people at DivX about the problem brought up the fact that both my TV and Sony Home Theatre should be registered to play DivX files, this I did (second piece). Having reinstalled Perian and opening my .avi files in Quicktime player I tried saving the files as DivX to several profile options including Home Theatre with max 720 pixels (last piece). At last it works fine. Thank you for your help, I am very grateful.
Robin

Update to kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now apparently included in Windows XP after Service Pack 2 and above.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
4:24 PM Sunday; December 7, 2008

kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?
(To Replace http://discussions.apple.com/thread.jspa?threadID=406147 if Accepted. )
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 7/12/2008)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or recieving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ablity to start either an Audio or Video chat from one end to a receipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
Note: It has been noted that this file is now just another link to the Standalone application. This might be an error by AIM or a newer version that includes the file.
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this
Between both of you.
At least one camera (Mac end)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to chat One Way but have sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the pargraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) the other.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:19 PM Friday; December 12, 2008

Re-Conforming and Audio Bug nightmares

Hi,
First, let me say that I've searched throughly about those problems before I came in here.
I own a company and we used to use FCP7 to edit our weekly show.
I've moved all suites to Premiere CC 7.2.1
Our workflow is a bit different than before, since PP can handle original files, in our case .mts sony AVCHD FullHD from FS700, NX70 a Handycam and the MP4 from GoPro Hero3.
Our main problems right now have been:
Re-Conforming:
I've searched about this and these are the possibles solutions
- Turn the creation of XMP off
- Disable XMP metadata linking
- Direct the cache and database files to the same external harddisk that our media is in
- Direct the scratch disk to the same Harddisk as the media.
- Media been on a Network volume and Computer clock / daylight saving time shifting.
- Before opening a project in a different machine, make sure to redirect (to find) the cache to the disk your using
I must say everything above was tested and dealt with but still. We have seen projects re-conforming by it self everytime we open PP. It normaly happens when moving from computer to another one. But sometimes happens on the same machine, between two days apart, with nothing different.
And the re-conforming takes a lot of time.
Audio Bugs:
Sometimes the waveform doesn't show up. Now this has a workaround, just go to clip > audio options > re-render audio. But it's annoying.
And more serious sometimes we got an audio looping 1sec over and over, even though the original is perfect, trying to re-render doesn't help. re-importing the clip doesn't help. Only deleting ALL the preview files (because you can't know which is which) that works.
Is there anyone with solutions (definitive) for these problems?
Regards

Hi Jim,
As I said, I'm using external USB 3.0 drives. No Network drives whatsoever.
All these:
System
Projects
Cache/Scratch
Media
Exports
Are in the USB 3.0 Harddisk.
If you are refering to the same drive as the OS that's not a solution as in some machines I have 160GB SSD.
Cheers,

Kichat: FAQ 3 - How do I get Video and Audio Chats with PCs ?

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
How do I get Video and Audio Chats with PCs ? iChat FAQ 3 (Updated 3/4/2009)
Applies to iChat 2.x, iChat 3.x and iChat 4.x to any version of AIM on a PC before AIM 6.1
See bottom section on AIM 6.5 and 6.8 on XP and Vista.
This piece is designed for those trying to connect Mac to PC for Video and Audio chats. Any iChat version Panther and up.
Glossary For This FAQ
This bit is designed for clarity.
Video is the sending and /or receiving of pictures and sound.
Audio is the sending and or receiving of sound only.
One-Way is the ability to start either an Audio or Video chat from one end to a recipient who can not match your capabilities (or Vice Versa)
What is needed
At the Mac end
A Mac running OS 10.3.x and iChat AV ver 2.1 or 10.4 plus iChat 3 or Leopard and iChat 4
A DSL/Cable/Fibre (Broadband) connection of at least an up link speed of 256kbs.
An AIM , @mac.com or MobileMe (@me.com) account name.
(hosting Multiple person Mac to Mac AV chats requires higher specs and broadband uplink speed).
At the PC end
1 PC running windows XP (home or Pro). THIS A MUST
The AIM Standalone Application, currently at ver. 5.9 at this link. AIM (the Site) now call this version Classic and it cannot be Installed On Vista
Note: there is also Trillian which has a Pro version for $25 that can also Video and Audio chat. The Basic version just Texts and Audio Chats (AIM does not Audio chat)
Some need the aimrtc12.exe file from Here Mostly Earlier than XP or Pre Service Pack 2 XP versions of Windows
An AIM account/screen name (AOL or Netscape count as well)
Service Pack 2 info. This info will allow the PC user to enable AIM thorough the XP Firewall. The Windows Firewall did not exist as such before this.
Between both of you.
At least one camera (Mac end works better)
A sound input device (the camera, if it has one is ok)
Your Buddies screen/account name in each others Buddy Lists
Other tweaks
For some people, using AIM on a PC, may also have to make sure their preferences (properties) are set in the AIM Buddy list, for their camera and /or Mic. (Tuning at Message 570)
This is an icon button lower right on the Buddy List marked "Prefs" (AIM 5.5). This leads to the Preferences. Drop down the list until you read Live Video. Click on this. In the new window that opens click the button that says Tuning Video and Audio. Follow the instructions in the wizard that opens up. Access in AIM 5.9 for this is in the My AIM menu at the top of the Buddy list and then Options
To Start
You should now be able to chat to each other.
If each of you has a camera it can be full Video , as described in the Glossary at the top.
To start from the Mac end, select (highlight) your Buddy with one click. His camera icon should be dark. Click on the icon near his name or the one at the bottom of the Buddy List. (You do not have to start a text chat).
To start from the PC end you need to start a text chat, then select the Video icon at the bottom of the chat window.
If one of you has a camera and the other has a Mic then you will be able to video chat One Way but sound will be both ways.
To start this type of chat from the Mac end you will have to go to the menu item "Buddies" and drop down to the item "Invite to One Way Video Chat"
To start this from a PC follow the directions in the paragraph above. You may need to change the tab to the incoming Video at the back of the two to see the Video. These tabs are added when the Video chat starts and the front one normally states you do not have a camera and shows a connection to buy one.
It is also possible to chat One Way if the other person does not have a Mic: replies will have to be typed in a Text chat.
No Camera and No Mic will cause iChat to End the chat with "No Data Received for 10 Secs"
Summary
PC end gets AIM 5.9 or Trillian Pro.
The PC end allows the app through the XP Firewall.
AIM 5.9 needs "Tuning" to Camera and Mic.
For any sort of sound to a PC using AIM, (Talk in PC or Audio in iChat) the Mac will need a camera. The other person can have a Mic and then live chats with sound both ways and Pictures (Video) One-Way.
NOTE: At This Time It Is NOT Possible to Audio (sound only) between Mac & PC with AIM & iChat
Trillian Basic can Audio. Trillian Pro can Video and has a bigger picture and can do Full Screen.
Another explanation of the set up can be found Here about AIM 5.5 but is transferable to AIM 5.9.
And Also here
My Web Pages particularly all of Page 12: What if your Girlfriend Lives a Long Way Away ? have more information.
<hr>
AIM 6.5 and 6.8 On Vista and XP
AIM 5.9 or earlier can not be installed on Vista.
AIM 6.5 and 6.8 use a new video codec with a description of "Real Time IM"
AIM have an FAQ page about this
Below the pics is this quote
What do I need to use Real-Time IM?
You and your buddy need to be using AIM® 6.8 or higher to use Real-Time IM. Unfortunately, Real-Time IM does not yet work with older AIM clients, iChat®, or AIM® for Mac®.
See items 5 through 13 on this page for alternatives including Web Browser based ones.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
This is the 2nd version of this tip. It was submitted on Saturday; April 4, 2009, 9:52 PM by Ralph Jonhs (UK).
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

This is the one I have been wating for
http://discussions.apple.com/thread.jspa?threadID=406152
kichat: Look and sound great in iChat!
Ian's First FAQ
Also New Today
http://discussions.apple.com/thread.jspa?threadID=121775
kichat: FAQ 2 - How to get my router to work with iChat?
And
http://discussions.apple.com/thread.jspa?threadID=121665
kichat: FAQ 1 - What do I need to start in iChat ?
11:20 PM Thursday; March 16, 2006

Persistent Aggregates bug with logic - anyone else see this ?

A long while ago I posted a bug report regarding the use of aggregates with the Stealthplug guitar audio interface. I also reported this on the apple bug report system.
Basically, when using Logic8 with stealthplug and OSX Tiger ( latest 10.4 ) I configured an aggregate using AudioMIDI setup program, configuring Stealthplug as the input and the built in audio as the output.
When one creates an audio track with the aggregate name selected I Logic8
preferences INITIALLY one can get audio input to show up, the "record" button appears and one can hear audio output to the main macbook audio outputs. However on repeated use and selection/deseletion of the particular named aggregate one finds that the stealthplug input is no longer enabled ( the record button disappears).
I found out recently that if I delete the aggregate ( I only had one aggregate st up ) and create a NEW aggregate, this time with a different name, but with the same settings ( stealthplug as input, built in outputs as output ) then one can get the aggregate to work initially in logic8. However after a few sessions, or switching between audo devices in preferences, the aggregate again fails to work, by this i mean I no longer get the "R" button appearing in the channel strip for the input.
Stealthplug works fine when selected itself if one selects this as the device, but NOT when used through an aggregate. I suspect this is something to to do with aggregates and not stealthplug.
My suspicions is that it has something to do with the way logic8 or the CoreAudio system stores its aggregate preference information since I find that if I delete the original aggregate but recreate the same aggregate settings using a different name then the aggregate will work for a short time.
This really needs fixing since aggregates are potentially so useful.
Anyone else seen this with stealthplug or another audi interface ? is the Aggregates system just plain buggy? dos this problem go away in Leopard ?

Well I can say that after installing updates to QuickTime is appears I have been having a lot of trouble with Aggregate Devices as well. I use 2 896HD MOTU interfaces and after a few sessions of Logic, the Aggregate device stops working. I can either (a) reset the computer, (b) sometimes reset the coreAudio driver (works rarely) or (c) create a new Aggregate device like you have and it all starts working again.
Even worse, some of my USB MIDI interfaces like the Fantom X7 just loose connection as well. If I remove the USB and then plug back in, it's recognized again immediately.
Something is seriously broken and I have NO clue where to begin to help fix it. The only thing I could do is re-install OSX 10.5 and not do the quicktime updates and see if that helps. Unfortunately, that is a LOT of work! (I use like 146 AU plugins total).

BlueTooth bug with car

Since the 4.3 update there's a big bug with the bluetooth connection with the car system - it still exists after a factory reset:
I paired the phone and the car. But every time they connect, I get a message box if I want to grant access to my phone's messages. Even the "Allow always" option does not work and I get asked every time. Very annoying!!

Hello, I'm having the same issue after updating my Xperia SP to Android 4.3 (12.1.A.0.266). In my car (Mercedes Benz A-Class from 2013) there is a radio called "Audio 20 CD" built in. Every time when I want to get into my car, my smartphone wants a connection request for my messages (SMS).The option "Always Allow" does not work. The phone does not remember the next time. I tried several times a new pairing of phone and car radio and I cleared the cache of the bluetooth-share app and smart connect app, but this didn't solve the problem. Is there a fix available? With kind regardsThorsten

Multi-channel digital audio HDMI with Onkyo pre-pro

Trying to get the HDMI to play nice with my home theatre pre-processor, an Onkyo Pro PR-SC886. so far:
1. I am setting the Sound Pref Output to the Onkyo, which it sees.
2. Setting the Midi Pref to HDMI/Onkyo which it sees.
3. I would like to get a digital stream to the Onkyo which it can convert to Dolby Pro Logic II which is my preferred choice for stereo music. So far, I can only get Stereo which the Onkyo will not convert.
4. In the Midi Pref, I have selected 192Hz/24-8channel output and the speakers are set to 5.1. Everything seems to work there.
5. I was hoping to use the "Encoded Digital Audio" choice, but get no sound when I use it.
Is this an Onkyo problem and are others able to use the Encoded Digital Audio setting with another brand of pre-pro/receiver? Or is this choice used for something else?
Thanks for any insight.
Peter

It seems that Onkyo's HDMI components don't like the HDMI output from computers. There have been several threads in this forum and others where Onkyo owners report issues.
But do try the instructions listed here to see if it makes a difference...
http://www.cod3r.com/2008/02/the-correct-way-to-enable-ac3-passthrough-with-quic ktime/
An alternative media player option is VLC. And you need to turn on the SPDIF option in the audio preferences of this app.

Can only have audio conversations with other iChat AV 3.0 users

so, since i updated my ancient powerbook to 10.4, i can no longer hold audio conversations with ANYONE other than people that have iChat AV. no one on aim, trillian, iChat under 3.0.
through some digging, ive come to the conclusion that it's because my computer is outdated, slowly dying and bugging up and will be resolved when i eventually purchase a macBook. BUT, i quick fix or some information to do so would be amazing.
please help!
stuart

so ive done some investigating. before having my cable modem up and running (speedstream 5400), i was using a wireless signal in the area. i don't know what it is, i just know it's slow haha. everything worked fine. once i switched to the faster modem, i can only chat with iChat AV 3.whatever users. it's not the operating system.
i just switched from MY cable modem back to the wireless slow signal and everything works perfectly. so, what's the deal?
help please.

Streaming audio problems with flash 11

Win XP Pro, 32 bit, IE 8 and Chrome 19: Flash 10 would stop (iheart radio) 4-5 times with a "streaming error". Iheart suggested upgrading flash to version 11. Since then, audio quality has gone down - echos, reverbs, slows, skips - sounds like an old 8 track tape! Attempts to remove flash 11 have failed - it just comes back. I followed the steps at adobe help, it still comes back. Tried updating audio drivers (intel 82801AA) - no change. Tried installing archived version 10 - flash still reports version 11. This thing is stickier than peanut butter on a hot day in a glue factory! Can anyone help - this is driving me craaazzzzyyyy.

I'm sorry you've run into this audio bug. Please see this FAQ for instructions on reverting to a previous version of Flash Player.
How do I revert to a previous version of Flash Player?

Vista audio bug with DivX AC3/5.1 surrou

Similar Messages

Maybe you are looking for