VISTA BOOTINGN PROBLEMS?

Hi guys, i am doing my head in with Creative's 'so called' safe Vista drviers THAT just dont work When i go to install them, they just crash and mess up my Vista boot code!! I have to go into safe mode and restore the system form a system resotre ponit!!!
!!! That gets my system back up and running but my sound still not working I am very very disponited in the level of support from creative, why can they not make drivers that work Vista has been out for so over a year now plus they would have had access to it before then, so why SO many problems I have just bought my copy of Vista I dont like sending all my money on an o/s for me not to get any sound from it's PLEASE HELP ME OUT P.S - has anyone else tryed to email creative, once you click send, it displays a 404 error each time, i was trying all day!!!! - Very very poor support, when after you do get though there site to an email form, it dont work!!!!

Sorry guys, I have been trying to get this dam thing to work for so long how that i forgot to give you any information that is important! I have a X-Fi Fatalty, i dont know the serial code! But i have some some head away, i am not sure what i have done to get this is work! But instead of Vista display unknown sound card device, it how reprots it is an X-Fi !!!! - But it come up with a 'code ' unable to start device!!
Any thing anyone can think of Also i have now tried, seeing has my pc now reports it has a X-Fi sound card, i thought the Vista drivers, the lestest from the Creatives web site, would succefully install now that the sound card is reporting to Vista but they dont want to even try to install now!!!!
After loading up thery display a error message about that i have already tryed to install then, without rebooting!! Even on a new start up What i think has happen is when the drivers tryed the frist time around they must have put a registry entey somewhere!!! Any one know how i can remove it to try to re-installl the drivers. Thanks Glenn

Similar Messages

FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. FIRE FOX UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES.

FROM WINDOWS (VISTA) A PROBLEM HAS CAUSED THE PROGRAM TO STOP WORKING CORRECTLY. WINDOWS WILL CLOSE THIS PROGRAM AND NOTIFY YOU IF THERE IS A SOLUTION. UPDATED TO THE LATEEST, I WOULD RATHER NOT HAVE AUTO UPDATES. [email protected] edit

You may select how and whether Firefox updates, although like most software it may be sensible to keep it up-to-date, it is more likely to remain secure and compatible with other software whilst up to date.
* for information on the options available see [[Updating firefox]] <--- clickable link ---

VIsta Wireless Problems with New FIOS Install July 2009

I recently had FIOS telephone, INternet andTV intstalled. All was well except on my Vitsa laptop I cannot maintain a steady wireless conneciton with the Actiontec MI424WR router. I hit the Web and found out that many have had this complaint and that there is an ongoing conversation about whose fault the problem is. I had flawless service under TIme- Warner with my Vista Wireless so I did not intially assign blame to Vista or my laptop. I do recall the Verizon installer mentinoed "problems with Vista" but he did not elaborate. I spent all day yesterday researching and attempting every fix suggested on numerous web sites. All failed except one.
Essentially, I now use my LinkSys Router in front of the Actiontec MI424WR router. I found the instructions to do this on numerous web sites after researching FIOS Vista wireless problems. The LinkSys router handles only wireless. Now my Vista laptop never drops a connection. I still have acess to FIOS TV guide and on demand so the fix did not interfere with FIOS router TV functions.
THe bottom line is that it would appear that there is a problem with the Actiontec MI424WR router and Vista. Fortunately for me I had the Linksys ROuter available. Verizon - you need to look into this. Based on what I have experienced I cannot recommend FIOS internet for those with VIsta computers until tjhis is addressed.
From what I have researched, Verizon claims it is a Vista problem. Beta testors of WIndows 7 have reported the same issues with FIOS and Actiontec MI424WR router. My experience and that of others who have devised the fix I employed would clearly suggest that Verizon needs to look into this and get this problem solved.
Steve B.

My neighbor had a similar issue. When trying to figure it out we found out that there is a problem with some of the Intel drivers when connecting to some g class routers. We upgraded the wireless drivers on the computer and bingo the problem went away. This was on an Intel-R pro wireless. If you have Intel-R pro wireless on your computer, try upgrading to the current driver set and see if that helps you too.
http://downloadcenter.intel.com/Default.aspx?lang=eng and then input the device number to search for a driver
====================================================================================
Error exists between keyboard and chair.

Itunes/Ipod with multiple Vista users - Problem

To set the stage - new Vista PC, shared by the family - so I set up individual ID's (thought that would prevent my kids from corrupting our stuff). Oh, and thought Vista was compatible.........
On the admin account, which is where the iTunes Library is linked, it sees my iPod but says it is in the process of "recovery" - even after accomplishing the restore process - this message comes up right away. But, lo and behold, on my daughter's ID, the iPod is recognized sucessfully (and what is weird is that iTunes wasn't even installed on her account (i had to go through the Q&A process) but the iPod was seen just fine. I can sync the iPod to her library, but even after exiting nicely, and logging off her ID, when I go to mine (admin), I get the same message/problem.
Any hints/help?

if still does not solve try this
. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921

Vista drivers problems Sound Blaster Audigy 2 ZS Noteb

First thing to do: haveyour systemchecked out, if windows says the hardware is failing there may really be something wrong with it.
If the SB card works in an XP machine there may be a problem in the the PCI slot or controller on the motherboard, either way have a tech shop look at it. If thehardware allchecks out: before putting the card back in completely delete the old driver and software, download the new one without installing it, then put the card in and windows should try to auto-install with the new driver.P.S. the platinum version is the one with thecontrol panel that slots into a dri've bay, if you have one of those, it's a platinum, if not, it's a regulHi all, how are you
I have a Sony VAIO VGN-SZ430N/B notebook, and I'm trying to install Sound Blaster Audigy 2 ZS Notebook on it (Unfortunately, the notebook came with windows vista business from factory).
This notebook has a Texas Instruments PCMCIA controller.
Under "Device Manager" the PCMCIA controller is described as "Texas
Instruments PCI-8x2/7x2/6x2 CardBus Controller", but on Sony's
webpage the driver that seems to be related to it is "Texas
Instruments PCI74 Integrated FlashMedia Controller Driver".
It is kind of all in one solution from Texas Instruments (PCMCIA
controller, Memory Card reader, and Firewire controller).
Please, may someone help me to answer the questions bellow
1)Are there any kind of compatibility problem between this notebook PCMCIA controller (described above), and Sound Blaster Audigy 2 ZS Notebook
2)I've already brought this notebook to Sony's support service, so they could verify if there is any kind of hardware problem with the notebook. Sony's technician wasn't able to find any hardware problems on it, but I'm experiencing the problem described below:
2.)Every time that I plug this sound card on my notebook, and I try to install Creative's latest windows Vista drivers(Creative Sound Blaster Audigy series Vista Driver 2.2.0002), thus It leads me to a Blue Screen during the driver installation process. Please, Does somebody know what could be this problem root causeIt is very weird, even if i try to install this sound card on clean windows vista install, then it leads me to blue screen. Besides, I have another PCMCIA card from another manufacturer, and I was able to install its windows vista drivers with no problem.(It sounds that Creative labs' vista drivers is the problem root cause as I've tested this sound card on a different notebook with windows xp and It worked fine).
3)Does anyone know if creative is planning to release a windows vista driver that allows the users to use all of this sound card featuresSo far the latest driver available doesn't support even DVD-Audio. Have creative labs discontinued this product
I appreciate any help you can give me,
thanks in advance,
Rogerr ZS.

The best advice I can give is to fully remove ALL Creative software.We've compiled a list of entries that will cause problems here. It's very important before installing newer files.http://nomoregoatsoup.wordpress.com/...tall-problems/Then install some better drivers and see if that cures your issues. The 2.2.0002 drivers are really, really awful, 99% of people I've spoken to had problems with them. I personally like 2.5.0002 Hope this helps.

Windows Vista install problem

I own a copy of Windows XP from Virtual PC. I therefore qualify to purchase an upgrade copy of Vista, which I did. Since I am a Mac person I assumed that I would simply be asked, upon installation, to provide my old product ID. In the Microsoft world this does not happen. The install disc looks for the previous version. When it can't find one the install essentially stops. I was able to install Vista by ignoring the request for the product ID but then I could not Activate the copy. It works fine but it will cease to work in 30 days. Has anyone had experience with this type of thing? There should be some way around this type of thing. Reading Microsoft user posts it appears that clean installs can only be done from non-upgrade copies. I cannot install my copy of xp first since it does not have SP2 as part of it. I know that I can theoretically slipstream a copy but that seems like a lot of hassle.

Hi,
Thanks for posting your solution. I had everything working beautifully in Boot Camp partition using VMware Fusion, but felt I needed VM's future tech support. In forum discussion and email support w/VM tech supp. learned that VM doesn't support Vista Home because MS doesn't support it through 3rd party, so I used Home's upgrade advisor and found that the only easly instll was upgrading to Ultimate. Tried to install Ultimate upgrade and got message that partition was too small. Long story short, had to erase Macbk Pro's HD and reinstall from Time Machine, which worked great. Boot Camp finally allowed new partition and I used your solution to install. However, I had to load the Home because Boot Camp couldn't find drivers on the Ultimate upgrade. Still, your work around helped. Problems I'm now encountering is that VM can't find the Boot Camp Partition as it did previously. Any ideas there? I can find the Boot Camp drive, but the "open" button stays grayed out. When I go to VM's HD it says 0 GG which doesn't make sense. I'll post a new topic, but I did appreciate your posting.

Photoshop elements 6 with vista - transparency problem

I just installed Photoshop Elements 6 to my new laptop which has Vista. I used Photoshop Elements 6 previously for digital scrapbook layouts on my old computer that had XP. In XP when I dragged a element that had a tranparent part onto my layout the tranparent part (was grey and white checkered before I put it on the layout) was invisible like it should be. When I do the same thing on my laptop with Vista the part that should be transparent shows up gray. Please help!!

That's pretty interesting because you should have had the same problem in XP, if I'm understanding what you're saying. You should be able to drag from the layers palette in either operating system, but you can't drag from the project bin in PSE 6 and 7 the way you can in earlier versions. That creates a special kind of pass through layer intended for use in a photo book.
Are you sure you weren't dragging from the palette in XP and from the bin in Vista?

Acrobat 8.1.5 on Vista x64 problem with PDF Printer

Hi all
Forgive me if this is a newbie question... I *tried* to get direct support from Adobe and they spent the time telling me my support had "expired" rather than answer the question... nice... so thought maybe someone knows the answer.
I have the latest version of Acrobat 8 on Vista x64. Anytime I use the "Adobe PDF" printer to print direct to PDF from an application, the PDF gets produced OK, however the print spooler for this printer retains a print job with status "Error - Printing".
The only way I can remove the job is to do it manually and a lot of times I have to Cancel it twice for it to work.
Any ideas how I can stop this from happening?
Thanks
Steve

Thanks... will give that a try and report back...
Reporting back... nope it did not fix the problem. But the repair process did damage the install of Acronis True Image so that it wouldn't load... I did a Repair of that install too and at least now I am back to where I was...
Appreciate the help. Anyone else have other suggestions?
SS

2.4ghz Macbook Vista X86 problems

Hey all, I'm having a bit of trouble with my Macbook running vista X86. Wondering if anyone can help.
I'm having problems accessing the control panel for windows. Pretty much every time I start it up I get an empty window. When I right click on the desktop and go to personalise, nothing happens at all.
Here's a screen capture of what happens when I go to control panel from the start menu.
http://img518.imageshack.us/img518/6531/controlpaneltc0.jpg
Was wondering if anyone's had any similar experiences using vista and if there's any way of fixing it.
Thanks,

I have the same problem. After three installs of Vista x86, i have successfully used my purchased OSX dvd to install the drivers onto Vista (bootcamp version 2.1). YETTTTT none of the drivers work. I have no internet, no track pad, no video...nothing. I have been searching for about 5 hours for anyone with the same issues, and i find nothing. I just think the new versions are not supported yet. hoy hoy?!
ps. i also tried with windows XP, using 2.0 Bootcamp, and 2.1.....as well as installing 2.0 first...blah blah.. nothing worked.
Apple really is not prepared with boot camp i am disappointed to say.

Windows Vista Authorization Problem

I have a problem with Authorization - I recently upgraded my OS to Windows Vista, and when I next went into iTunes it said I needed to authorize my PC which I duly did. Even after successfully authorizing, it won't play my songs. When I try it just asks me to authorize again, which I do - it then tells me I've used 1 out of 5 authorizations (which is right), and then it doesn't play. When I click play, I go through the whole cycle again - it prompts me to authorize, I do, it tells me I've used 1 out of 5, and it doesn't play.
Is anyone able to help me?
Many thanks,
Chris

Same problem here. Upgraded to Vista Business. Opened iTunes. Clicked a song that I had purchased previously. It said I needed to authorize the computer. I did. Authorization successful (and my number of auth'd computers went up by one). Clicked the song again. Same dialog box came up, telling me to authorize the computer. I repeated the process to no avail.
It just won't recognize that it is authorized... songs won't play.

PSE 6 on Vista/WinXP problems

I am having problems with Photoshop Elements 6 on a Vista notebook pc and I have also tried it on a WinXP notebook pc. Both have the same problems. Here are the problems:
1. I discovered a resize problem with PSE 6. As you know, with a Windows app there are 3 viewing states:
a. maximized (2nd icon in upper right corner is 2 interlocking squares)
b. don't know what you call it, but it the state where you can drag the edges of the app window to resize it (2nd icon in upper right corner is a square)
c. minimized
I just discovered that with PSE 6 that b doesn't work. You can't grab any of the edges and resize. The mouse cursor doesn't change to a double arrow when you put it over the edge of the window. If you are very careful and position the mouse cursor right on the edge you can hold the mouse button and move the edge, but it doesn't resize the window, it just moves the whole window. By the way, my PSE 6 when in state b is basically the same size as when maximized and there doesn't seem to be any way to resize it.
2. I have both computers set up so that the taskbar properties are set to this:
Lock the taskbar
Auto hide the taskbar
Keep the taskbar on top of other windows
I have been using the auto hide feature for many years to maximize the usable real estate when using a notebook. With all of my other programs this works fine, but with PSE 6 when I move my mouse cursor to the bottom of the screen the taskbar does not scroll up. PSE is maximized. The only way I can see the taskbar is if I first minimize PSE.
Does anyone else have these problems? Does anyone know how to fix them?
It appears to me that PSE 6 does not conform to the Windows standard at all. Does your PSE 6 behave the same as mine? Am I doing something wrong?

I have this problem too (Vista 64bit), and some others relating to it. Clicking on PSE does not make it the active window; there is no way to move it on top without minimising everything else that is on top of it (unless you can see the task bar and select it from that.
I would like to try the tip about the bottom right-hand corner, but that is always off the screen and I can't see it. I can't move the window, even selecting the last pixel; clicking on PSE does nothing, clicking outside it starts a marque on the desktop. My only options are to have the application maximised, or not maximised, using almost the whole screen. (Note that my laptop does not have a standard sized screen; It is 1920 x 1080, so the pixels between 1080 and 1200 that would normally exist for a WUXGA do not).
Given that the built-in help is actually a web-page, it makes it IMPOSSIBLE to have the help open and trying to use it in the application at the same time. (Even simple functions from PS7 do not seem to work the same way in PSE6, hence my need for the help.)
I only installed PSE to play with my new Wacom tablet and was going to get LR & PS, but if even basic things like the window control are flaky...

JDeveloper 11 Vista Install Problem.

Hi I Installed JDeveloper 11 on clean Vista machine. After installation JDeveloper asks me every time on loading set up files association again. Above that I got the next error message on deploying web application on embded Web Logic:
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
The full stack trace below:
D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\bin\startWebLogic.cmd
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=;D:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;D:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=D:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;D:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;D:\Oracle\MIDDLE~1\JDK160~1\jre\bin;D:\Oracle\MIDDLE~1\JDK160~1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\ASUS Security Center\ASUS Security Protect Manager\bin;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode)
Starting WLS with line:
D:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -DproxySet=false -Djbo.34010=false -Xverify:none -da -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
<27.10.2008 23:49:52 MSK> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
D:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar>
<27.10.2008 23:49:52 MSK> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.>
<27.10.2008 23:49:52 MSK> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008
WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008
WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 >
<27.10.2008 23:49:53 MSK> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<27.10.2008 23:49:53 MSK> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<27.10.2008 23:49:53 MSK> <Notice> <Log Management> <BEA-170019> <The server log file D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.>
<27.10.2008 23:49:55 MSK> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<27.10.2008 23:49:56 MSK> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.>
<27.10.2008 23:49:56 MSK> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<27.10.2008 23:49:57 MSK> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<27.10.2008 23:49:57 MSK> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.>
<27.10.2008 23:49:57 MSK> <Warning> <Server> <BEA-002611> <Hostname "127.0.0.1", maps to multiple IP addresses: 192.168.0.197, 127.0.0.1>
<27.10.2008 23:49:57 MSK> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.0.197:7101 for protocols iiop, t3, ldap, snmp, http.>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode>
<27.10.2008 23:49:57 MSK> <Warning> <Server> <BEA-002611> <Hostname "192.168.0.197", maps to multiple IP addresses: 192.168.0.197, 127.0.0.1>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<27.10.2008 23:49:57 MSK> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
DefaultServer startup time: 8565 ms.
DefaultServer started.
[Running application Application_2 on Server Instance DefaultServer...]
---- Deployment started. ---- Oct 27, 2008 11:50:00 PM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2008-10-27 23:50:01.044: Writing WAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Application_2\Application_2-ViewController-webapp
2008-10-27 23:50:01.059: Wrote WAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Application_2\Application_2-ViewController-webapp
2008-10-27 23:50:01.683: Writing EAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Application_2
2008-10-27 23:50:01.683: Wrote EAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\Application_2
Deploying Application...
<27.10.2008 23:50:02 MSK> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1225140602682' for task '0'. Error is: 'weblogic.management.DeploymentException: '
weblogic.management.DeploymentException:
     at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
     at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
     Truncated. see log file for complete stacktrace
>
<27.10.2008 23:50:02 MSK> <Warning> <Deployer> <BEA-149004> <Failures were detected while initiating deploy task for application 'Application_2'.>
<27.10.2008 23:50:02 MSK> <Warning> <Deployer> <BEA-149078> <Stack trace for message 149004
weblogic.management.DeploymentException:
     at weblogic.application.internal.flow.BaseLifecycleFlow$CreateListenerAction.run(BaseLifecycleFlow.java:171)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.application.internal.flow.BaseLifecycleFlow$BaseAction.invoke(BaseLifecycleFlow.java:99)
     at weblogic.application.internal.flow.HeadLifecycleFlow.createListener(HeadLifecycleFlow.java:117)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.security.jps.wls.listeners.JpsApplicationLifecycleListener
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at weblogic.utils.classloaders.GenericClassLoader.loadClass(GenericClassLoader.java:176)
     Truncated. see log file for complete stacktrace
>
[Deployer:149034]An exception occurred for task [Deployer:149026]deploy application Application_2 on DefaultServer.: .
weblogic.management.DeploymentException:
#### Deployment incomplete. #### Oct 27, 2008 11:50:03 PM
oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
     at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
     at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436)
     at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209)
     at oracle.jdevimpl.runner.adrs.AdrsStarter$4$1.run(AdrsStarter.java:1316)
Caused by: oracle.jdeveloper.deploy.DeployException
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413)
     at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238)
     ... 11 more
Caused by: oracle.jdeveloper.deploy.DeployException: Deployment Failed
     at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:395)
     ... 12 more
#### Cannot run application Application_2 due to error deploying to DefaultServer.
[Application Application_2 stopped and undeployed from Server Instance DefaultServer]
Thanks in advance
Andrew

The problem is that my account on Vista has admin rights, besides it i haven't got any listeners defined in web.xml.
<?xml version = '1.0' encoding = 'windows-1251'?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" version="2.5" xmlns="http://java.sun.com/xml/ns/javaee">
<description>Empty web.xml file for Web Application</description>
<session-config>
<session-timeout>35</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
</web-app>
Best Regards
Andrew

Have Linksys WRT54GS Got a new laptop with vista having problems

I have been using this wireless router for a while works great. I got my wife a new laptop with vista can conect with limited conectivity (excelent signal). Can not use any online programs. How do i fix this problem?

"limited connectivity" ca be due to incorrect n/w key u r typing.
if u have an securtiy enabled conection, when u r trying to connect on vista laptop, plz type the correct n/w key.if there is any confusion oen setup page and chck the ifo from there.
if this doesn't work, u mght have to upgrade f/w of WRT54GS from www.linksys.com as win vista sometimes requires the latest f/e and drivers to connect properly

People with vista having problems with adobe flash player 9

this seems to be a very big problem that this many people are
having problems with the adobe flash player 9. I can't get it to
install at all and many can't get it to work..how many have vista I
wonder? Please help us fix this frustating problem.

I am using vista and having the same issue...

Vista Sync problem

the computer is recognising the ipod as an ipod but will not sync,when i click to sync it will say its updating for a minute and then an error message comes up.(The Ipod "Nick" cannot be updated. An unknown error occurred (-50)
i am using vista premium and the newest itunes.

I had a similar problem with Vista Business and iTunes incompatibility. Here's the solution that worked for me.
It's the same solution that I used for all the program that aren't yet fully compatible with Vista. It's a temporary solution though till these programs are compatible.
1- Go to Control Panel
2- Go to Programs
3- Click on Use an older program with this version of windows
4- Click on I want to choose from a list
5- Select iTunes on the list
6- Now on the next list choose your operating system
7- Follow the other steps as indicated
I hope it works for ya
Dell Inspiron 9400 Other OS Vista Business
Dell Inspiron 9400 Other OS Vista Business

VISTA BOOTINGN PROBLEMS?

Similar Messages

Maybe you are looking for