Vista Business not showing as valid OS for ordering Windows 7

Around July 6 there was at least one thread that mentioned when trying to order windows 7 upgrade for Pavilion Elite e9150t (product NY810AV) with Vista Business factory installed, the only current operating system in the dropdown is Vista Home Premium. This upgrades to a lower level of Windows 7 than Vista Business.
This was reported fixed at that time, but is apparently broken again.
Is there any kind soul out there who can fix it again? I called the customer support number and got the usual runaround. (Updating now, try later. When I didn't buy that, they they would escalate to HP and send me an email in 1 day - didn't happen).
I am sure I am not the only one with this issue.
Thanks so much.

An additional note - I did try the browser tool to identify my OS - said it couldn't find it and to call customer support. Perhaps because it was Vista Business and not Vista Home Premium? Thanks.

Similar Messages

Error (Data mining): The specified mining structure does not contain a valid model for the current task.

I'm trying to run the Cross validation report on a mining structure that contains just Microsoft Association Rules mining model. In Target Attribute, I've tried:
Actual(Service Description).SE value
Actual([Service Description]).[SE value]
Actual(Service Description)
Actual([Service Description])
just because i don't know what is the exact correct format, but none of them worked, and I always get the following error:
Error (Data mining): The specified mining structure does not contain a valid model for the current task.
the following is my mining model structure

Association rules does not allow for cross-validation
Mark Tabladillo PhD (MVP, SAS Expert; MCT, MCITP, MCAD .NET) http://www.marktab.net

Vendor Ref No. does not show in Journal Entry for AP Credit

AP Invoice journals show the vendor reference number in field Ref 2. However, when creating an AP Credit memo, the vendor reference number does not show in the journal for the credit memo, instead the field Ref 2 is used for the base document number.
I have two clients who have pointed out that they would expect to see the vendor ref number in the Ref 2 field in the journal when an AP Credit is created, as this is the functionality for Goods Receipts and AP Invoices.
Both clients are currently manually updating the Ref 2 field in the journal for AP Credit, so that in the BP account transactions view they can sort field Ref2 by vendor reference number.
Does anyone have any suggestions on a work around for this?
Thanks,
Lianne Plant

Hi Lianne Plant,
You may check: Journal Ref2 field : AP credit note
Thanks,
Gordon

HT1727 help how do i make a purchased song my ring tone, it;s not showing on my list for ringtones

help how do i make a purchased song my ring tone, it's not showing on my list for ringtones

This song was purchased from the iTunes Store?
If so, you can't create a ringtone from music that was purchased from the iTunes store, but if there is a ringtone available for purchase and download at the iTunes Store with this song, you need to do that.
For music in your iTunes library on your computer that was not purchased from the iTunes store, there are a number of ways to create a ringtone with such music. With a Mac, there is an inexpensive or free app avaiable via Apple's online App Store named Ringer. Ringer has access to all music and sound files in your iTunes library that was not downloaded from the iTunes Store for creating your chosen segment of the song to be used for the ringtone. The app places the created ringtone in your iTunes library under Tones for transfer to your iPhone when syncing.
Creating ringtones on a Mac can also be done with GarageBand, and there is a manual way of doing this with iTunes.

When I connect my ipod to 2 different Mac computers, it will charge but is not showing up in itunes for sync. What happened?

When I connect my ipod to 2 different Mac computers, it will charge but is not showing up in itunes for sync. What happened?

What have you tried so far in terms of troubleshooting this issue? Are you plugging the iPod into a high powered USB 2.0 port on the back of your Mac? Have you tried a different USB cable?
What happens if you try to reset the device with it still connected to the Mac?
How to reset iPod
Has this iPod ever worked on this Mac or is this the first time you have time you have tried connecting it?
Have you carefully worked through each and every single suggestion in this Apple support document?
iPod not recognized in iTunes and Mac desktop
B-rock

IPod model A1059, freezes, unresponsive to all click wheel entries. Reset does not work. Does not show up in ITunes or on windows explorer. What is the problem and how do I fix it?

IPOD model A1059 appears frozen and is unresponsive to all click wheel entries. Reset does not work. Does not show up in ITunes or in Windows Explorer. What is the problem and is there a fix?

If you are unable to reset the iPod (assuming the hold switch is not in the On position either), then you'll have to let the iPod's battery fully drain. Then connect it to a charger and leave it to charge for a couple of hours.
B-rock

Why are my five websites not showing up in my CC browser window - CC Account Panel?

Why are my five websites not showing up in my CC browser window - CC Account Panel?
I have a full account!
g

Gmpulaski which web sites are you referring too? Is it the five Business Catalyst sites included with your membership?

My ipod 6th generation does not show in control panel on computer Windows 7.....also when I try to download from itunes, I get message network cannot make connection. can you provide me help?

My ipod 6th generation does not show in control panel on computer Windows 7....also when I try to download from itunes, I get message saying network cannot make connection. Can you help me with these issues?

Hello jrsmallwood,
I've a couple of articles that should get you back on your way!
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/TS1369
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

Please help! I have photoshop and iphoto does not show it in my preferences edit window. How do I get it as an option in my preferences.

Please help! I have photoshop and iphoto does not show it in my preferences edit window. How do I get it as an option in my preferences.

I tried it and nothing changed. Even when I right click on an indiviual image all it does is duplicate it. Iphoto seems to be recognizing my external hard drive as an editor......cannot get photoshop except to drag a picture into photoshop from iphoto, and once I have worked on it and saved it to iphoto I cant find it anywhere.

Insert into viewobject in app module does not show entity validation errors

Hi everybody,
I am using JDeveloper 10.1.3 and ADF BC/ADF Faces. I want to have a button on one of page and I want that whenever user clicks on this button a records is inserted in a table. so I created an application module service method and exposed it on the client interface and the put it on my page using Data Controls Tab.
Here is some part of my code in application module :
public void setMember() {
HrMembershipsViewImpl membershipView = (HrMembershipsViewImpl)am.findViewObject("HrMembershipsView1");
HrMembershipsViewRowImpl newRow =(HrMembershipsViewRowImpl) membershipView.createRow();
newRow.setAttribute("MemberId",memberID); //this.getCode());
newRow.setAttribute("MembState","1");
newRow.setAttribute("CardState","1");
membershipView.insertRow(newRow);
trans.commit();
When this method tries to insert a record which violates a validation rule in the Base Entity Object, the screen does not show any error regarding to violating the business rule but nothing is inserted. I changed my code and captured the exception around the commit and I found that a JBO-27023 Exception happened after commit ( which was very surprise since the page does not show any error).
Now I can change my code to to the following to show that error happened.
public void setMember() {
try {
trans.commit();
catch (JboException ex) {
getDBTransaction().rollback();
throw new JboException ("There is an error during commit");
throw ex;
But I believe it shouldn't be like this. Normally, we should be able to insert programmatically in a view and if the business rules are violated we should get the violation error messages. If I use the above mentioned method we can not understand what business rules are violated.
Does anybody know what is wrong with my solution? I have seen a lot of times that using application module is the best way for adding functionality to the application pages but I really feel that something should be wrong if we can not get business rule violation messages.
Any help or references would be highly appreciated.
Thanks in advance,
Navid

Hello Navid,
it should work without try-catch.
1. When you add try-catch, does your error message appear on the page?
2. Does your page contains af:messages component?
3. Does your button have any navigation to another page?
Rado

Windows Vista Computer not showing up in finder

Hi, my WIndows Vista computer is not showing up in finder under Shared. I can connect to my PC from my mac by clicking on finder, go, connect to server and typing in the PC's IP Address, Username and Password. I can also see my Mac computer from my PC running Windows Vista.
What's weird is that it was showing up for awhile but I recently changed my network key and unchecked file sharing on both my Mac and PC.
Afterwards I re-enabled file sharing on both my mac and Vista computer but my PC won't show up in finder.
I can connect to my PC and see the computer in finder but when I click eject, it disappears. I would like it to remain in finder. Is there some setting that I need to enable? Please help

Assuming that the missing machine is part of the same Workgroup/Domain:
Open Terminal and enter "nmblookup -M workgroupname" (without the quotes, and replacing workgroupname with the name of your workgroup or domain.
This will list the IP address of the machine that is the "master browser" of your network. If you are on a domain, the address should be that of your domain controller. There should only be one ip address listed.
You can then get that machine to list the shares that it see on the network by entering:
"smbclient -L ipaddressofmasterbrowser"
You should be able to just press enter when it asks for a password.
This will list available shares and servers.
Regards,
Rodney

Vista Share NOT showing up in OS X 10.5

Okay here is the deal,
I can view my Mac share just fine on the Vista machine, but the vista share does not show up on my mac machine in Finder.
What's up?
I can access the Vista share by typing: smb://192.168.1.106. Things work fine that way... But I want it to show up automatically.
Both my mac are in the same workgroup if that makes a difference. Also running Vista Ultimate on the PC and 10.5.2 on the Mac.
Kinda puzzling since XP shares showed up fine in 10.5, and I had a hard time getting Mac shares to show up in XP.

Called Applecare,
My issue went all the way up to an "Apple Engineer."
They told me 10.5 does not actively search for SMB shares.
I say "That is impossible because XP is automatically listed in the Finder sidebar anytime a computer is available."
I get an 'over the phone shrug' and that was the end of the call.
Can some network genius out there help me?!?

G/L Description not showing in Query designer for Characteristic values

Hi Friends,
We have developed a report and that we have made two New selections on the object 0GL_account....some GL Account number are grouped in that. While selecting the GL Accounts to new selection, it is showing GL Account number and Description. After that, the selected objects are not showing the Description in the query designer. It is showing GL Account number only for the both Technical name and Description. I Would like to see Description of the GL Accounts in the Query designer. i have plan to delete certain account based on their dercription.
And at the Infoobject description in the Business Explorer tab Display feild it is set as Text and Key. And till yesteday it shown the Description for the Account numbers. The daa loads are also .gone fine.
Can you please guide me in this regards
Thanks & Regards
Anand

Hi Thanks for your reply.
The accounts which we selected are having Description and it is showing while selection the selected GL Accounts.
And the master data also is in active...When i try to activate the master data Agoin it is saying statement "Master data for characteristic 0GL_ACCOUNTactive"
Any more suggetions..........
Regards,
Anand

Outlook 2007 (on vista) will not show when trying to synchronize in v4.3

I've installed DM v4.3 on vista and and want to synch with MS Outlook (2007). However, in the synch configuration (calender, contacts, etc.) my options are:
<none>
<Yahoo>
<ASCII Importer/Exporter>
Where is Outlook?? Does anyone know why it's not showing up? I'm not using an enterprise server. I have seen this work on the same set-up so I know it's not a compatibility issue. Any help would be greatfully appreciated!!

Nikon E5000
Do you mean a NIkon CP 5000 (Coolpix 5000)? Aperture supports many raw formats, but not all, because the raw support has to be camera specific. Not all NEF files are in the same format - all Nikon cameras will call their raw files NEF.
For some cameras Aperture never included raw support. The currently supported cameras are listed here:
http://www.apple.com/aperture/specs/raw.html
It looks like your camera is not on this list, so if you want to shoot raw with that camera, develope the raw files using a different raw converter (Adobe's dng converter or the suftware that came with your camera) and import tiff or dng files to Aperture.
Regards
Léonie

RSRV not showing number of record for the newly created cubes

In RSRV Elementary tests i execute database information for a newly created cube.It is executed fine and it is showing the no of dimensions and line item dimensions but it is not showing the diff tables E,F.... I tried refreshing the statistics of this cube in the manage and did check statistics aswell.But it is still the same.and I tried in the program SAP_INFOCUBE_DESIGNS it is showing for all the cubes except for the newly created once.
Is there any settings as such.
Let me know ASAP

Hi Ninad,
Use the program SAP_INFOCUBE_DESIGNS and get the cube size in bytes.
Transaction se16 -> fact table name, /bic/f[infocube name] and /bic/e[infocube name] or /bi0/f.. and /bi0/e for business content infocube, click 'number of entries' - This is for no. of records.
Transaction DB02 -> 'detail analysis' -> object name = [infocube name]
Function Module - RSDU_INFOCUBE_TABLE_SIZES_INF
Bye
Dinesh

Vista Business not showing as valid OS for ordering Windows 7

Similar Messages

Maybe you are looking for