Vista Camera Driver leaks LOTS of handles

I have a R61 with built in webcam.
The Lenovo driver installed is called CameraMonitor Application (vsnp2uvc.exe) and is currently using 471,229 handles, and is going up 2 handles a second.
(You can see this easily in Task Manager if you view all users processes and add the 'Handles' column.)
I don't often boot my laptop (I use sleep a lot), so if you're trying to repro, make this part of the tests.
Eventually the system stops responding correctly by giving handle error in other programs...
This is with Vista 32 SP1...

Ok -
We can try to have a look.. Could you both post back with system model type, Vista version, any service packs and camera driver version (or if native in Vista). These will be all questions (plus a few) the techs will have when setting up a system to see if this occurs for us as well.
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Lenovo n200 3000 0769-BAG vista camera driver?

Hello my friends. I have Lenovo n200 3000 0769-BAG model laptop. My operating system is vista home basic x86. My integrated camera doesn't works sometimes. This event happens frequently at now. The camera driver is not original, it is automatically installed when vista operating system setup. So what can I do? Is there any original camera driver somewhere? Thanks a lot...
p.s: (0689 type camera driver doesn't work at 0769-BAG.)
Message Edited by gizsin on 04-28-2009 07:11 AM

Hi !
I have exactly the same laptop and I had the same problem.
It was hardware related. The camera wire become loose and was not connecting sometimes.
You can, if skilled, solve the problem yourself by following the dismantling videos and correctly plugging in the camera. If you route the cable correctly you'll solve the problem.
Bear in mind that you need some tools, time as you'll have to dismantle quite all the laptop and skills in order not to make things worse...

IPad Photo Transfer: Windows Vista Digital Still Camera Driver Failed

Hi,
I am trying to transfer photos from my iPad to my laptop. When I plug it in to the laptop the Apple Mobile Device USB Driver installs successfully and the Digital Still Camera driver fails. I have previously transferred photos in this way without any problem. When I plug the iPad in to the laptop it does not show up in 'my computer', the iPad is on and the screen is unlocked. Autoplay is on but no menu appears to transfer the photos. The photos I want to transfer have been taken on the iPad. It shows up in iTunes as normal. I can transfer photos from my iPhone to the laptop without a problem.
This is what I've tried:
- uninstall iTunes and reinstall
- restart the computer
- turn iPad on and off
- uninstall and reinstall apple device driver (even though it was up to date and said to be working as usual)
- plugged it in to an old laptop (windows xp) and it worked as expected
- checked for usbappl.syn in C:\Windows\system32\drivers and it is present
- uninstalled all Apple content from my laptop and reinstalled it all again
- repaired the Apple Mobile Device Support program
Any help would be much appreciated, it is driving me crazy!

Hi
I've had similar problem with my Iphone 8gb 1.1.2 OTB and Windows Vista right from when i purchased it. I tried calling Apple support and tried out all the things that you've done so far and got fed up with it. Now I download my pictures using a third party software called TouchCopy. Apple was not able to identify the issue but it certainly an issue with the OS and not the Iphone. It works like a breeze with my Windows XP PC at home but my laptop doesn't recognize it and it just gives "device installation failed". But curiously for sometime like 15 days ago, the device driver got installed but still I didn't get the camera icon in MY Computer... So if somebody could help... great!!!
And Hail Vista because I've had several driver issues like these and my antivirus is OneCare so I don't think Microsoft could complain about my installations.
Cheers
Andrew Sam

Pc-cam 900 vista x64 driver

I need vista x64 driver for my pc-cam 900

I have same problem with Mandaraku who posted 04-20-08. Please help me too.
I have a Camara PC CAM 900 since 2005. It lost the software installation. I can not download on the site CREATIVE. Urgently need to install this chamber in my new computer. How do I get to download installation of this driver? I use Windows XP.

Error loading iphone 3gs digital camera driver windows vista

I recently received an Iphone 3gs and it used to work when I would plug it in to my Win Vista pc. I know, I know. Vista isn't that bad. I digress. I can not get the digital camera to load anymore. I get the standard answer. Could not load software. I need a download to get this going. HELP!

Have you installed iTunes? The camera driver gets installed as part of the package.

What must I do to properly install my ipod's drivers and not just the ipod's camera driver??

What did I do wrong when I first activated my ipod touch? Only the camera driver appears installed when I connect my ipod to my pc. How do I correct this problem? What must I do in order to install the proper drivers in order for me to access all order options, programs or applications? Thanks you all for any help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Also, if you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

SbRIO usb camera, driver from myRIO

Hi,
in myRIO the common USB camera works, is it possible to use the same set of drivers on sbRIO 9636?
I think it has the same OS, USB, only the CPU is different.
I can see the USB device, but not as an IMAQ camera.
Older posts says it was not possible, but there should be new drivers...
Thanks a lot.
Neo
Hardware-designer, inventor, freak...
FEI, VSB Technical University Ostrava

Hi NeoGHOST,
The sbRIO-9636 and myRIO are quite different under the hood. They use a different processor and OS. sbRIO-9636 is using VxWorks OS on a Power PC and myRIO uses NI Linux RT on a dual-core ARM processor.
I'm not very familiar with the USB Camera driver, but I wanted to point out that it would diffenately require a different back end implementation to support both targets.
Regards,
Spex
National Instruments
To the pessimist, the glass is half empty; to the optimist, the glass is half full; to the engineer, the glass is twice as big as it needs to be...

How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor

Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
   Paul

i get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First           : 0x4001c001
DLL Last            : 0x41c7c0d8
Physical First      : 0x84001000
Physical Last       : 0x863bbdec
Num Modules         :        294
RAM Start           : 0x863c0000
RAM Free            : 0x863d5000
RAM End             : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files           :        116
Kernel Flags        : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start   : 0x00000000
Driver Glob Length : 0x00000000
CPU                 :     0x01c2
MiscFlags           :     0x0002
Extensions          : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18    0x9     0x25    0x0     0x0     0x0
Row 1: 0x26    0xd     0x28    0x0     0x0     0x0
Row 2: 0x27    0x24    0x23    0x0     0x0     0x0
Row 3: 0x0     0x0     0x0     0x0     0x0     0x0
Row 4: 0x0     0x0     0x0     0x0     0x0
Row 5: 0x0     0x0     0x0     0x0     0x0     0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
        Height = 0x280
        Width = 0x1e0
        HSW = 0x20
        HFP = 0x8
        HBP = 0x17
        VSW = 0x1
        VFP = 0x4
        VBP = 0x3
        DVI is not enabled
        PixelClkDiv = 0x7
        LogClkDiv = 0x1
        ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed.

For those who have problems RE: My iPhone 4 on connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??

For those who have problems RE: My iPhone 4 connecting to my pc shows my friends name in the DIGITAL camera Drive..It dsiplays my correct name when I`m on iTunes..PLEASE HELP ME HOW DO I CHANGE THE NAME IN THE DIGITAL CAMERA DRIVE??
SOLUTION:
Iam pointing t0 windows7 os.
1) go to control panel
2) open hardware and sound
3) In that open Devices and printers
4)In that u can find Apple Iphone.
5) now right click on this --> Hardware --> Properties --> General --> Uninstall --> ok.
6) now unplug and plug in ur iphone again.There u go u iphone name changes to its original name.

I am having this problem. At first with the new iPhone 5, and then with the iPad 2. I am not sure why this is happening.
My gut feeling is this is an iO6 issue and here's why -
The problem mainly occurs with apps. I have about 150 apps, and when I plugged in the phone, iTunes went to sync all of them. The process would hang up after about 20 - 30 apps were loaded onto the phone. I could tell where about the process hung up because the apps on the phone showed up as "waiting".
Then on the iPad 2 I plugged in to sync and saw there was a huge "Other" component in my storage. It required me to restore the iPad 2 from backup. With this restore the same issues occurred - putting the apps back on the iPad would hang up. The videos on the iPad also got stuck - maybe after about 10 hours of videos transfered iTunes crashed.
My solution has been to soft reset the device, restart Windows, and continue the process until it's complete. This is remarkably inefficient and time-intensive but everything works with patience.
I have been wondering if others have had these same problems.

How do I get Vista to go back to the Windows' Vista generic driver after an Extigy upgrade fiasco

Hello all. First, I'm glad to have the opportunity to be a part of this group. I didn't know it even existed, but here I am...so, let me know what you think.
I am a new Windows Vista Ultimate OS owner, and thus far, I'm absolutely thrilled with the advances in video render and compression speeds. However, one of the auto-update features tried to update my Extigy driver, the one that apparently loaded with the original install of Windows Vista, and the update didn't work...go figure. So, now there is no way to use the system restore as it doesn't recognize that there was a change, and I can't get the Extigy to make a peep.
How do I go bakc to the Windows Vista generic driver so I can listem to my voice overs agan?Thanks so much folks... Michael

Go to the device manager, and select the extigy, then properties, then in the driver tab, the 3rd button down

Camera Raw Preferences- Tiff / JPEG Handling -CS 3

In the Camera Raw Preferences > JPEG + Tiff Handling Section I have " Always open TIFF/JPEG Files with Settings Using Camera Raw" UNCHECKED. Yet, when I double-click on an image in Bridge to open it, it opens the Raw window. I want the image to open directly in Photoshop. What do I need to do?

There are other preferences to be UNchecked. Carefully examine Camera Raw prefs, Bridge prefs and Photoshop prefs.
Then relaunch Bridge and Photoshop.

Windows XP SP2 - Camera driver will not load

Have the same problem on two different machines. iTunes sees the phone and all the things in it sync as expected, Contacts, Calendar, Pictures, Music, etc.
The first time I connected the phone after taking a picture, I get the pop up showing that Windows sees the Digital Still Camera. Shortly after that I get the "Windows encountered a problem" message stating that my new device might not work properly. The phone is connected directly to the PC's USB 2.0 port using the cable that came with the phone.
Device manager shows the Digital Still Camera with the yellow exclamation mark on the icon. The device status reports...
"Windows cannot load the device driver for this hardware
because a previous instance of the device driver is still in memory. (Code 38)"
I removed iTunes 7.3.1 and reinstalled it. I removed the camera driver, rebooted, and let Windows re-recognize the camera. Same problem, both machines, both XP Pro SP2.
Any ideas?
Windows XP Pro

Resolved. No wonder I'm the only one that encountered this.
I use a Visioneer Strobe Pro USB sheet fed scanner.
http://support.visioneer.com/products/mobile/EOL/StrobePro/
In Device Manager under Imaging Devices, it was showing Digital Still Camera (with the yellow exclamation mark) and Visioneer StrobePro USB Scanner.
On a whim, I decided to unplug the scanner. Then I closed the scanner driver via its icon in the system tray. Within a few seconds, Device Manager updated itself, Digital Still Camera had changed to Apple iPhone. Right away I got the 'Camera connected' dialog asking how I wanted to retrieve the photos from my device. It also shows up in My Computer under Scanners and Cameras. Problem solved.
Next I plugged my scanner back in and now it's got the yellow exclamation mark indicating a problem with the driver. No big surprise.
Once I disconnect the phone and plug the scanner back in, Device Manager updates again and the scanner driver shows back up without the yellow icon. Lastly I reload the scanner driver.
I'm not sure why these two conflict. Don't know if Windows forbids more than one imaging device to be connected at a time or what. Maybe the scanner driver is so old that it doesn't behave properly...it's certainly not certified on XP.

Camera Drives (CompactFlash) no longer mount with Aperture 2.0

Has anyone noticed that camera drives no longer mount in the finder. This means that we no longer have access to these drives in the Finder. I believe this started with the release of Aperture 2.0.
Stellarphotorecovery no longer sees these drives.
In addition, files saved to the flash cards (scanned images) are no longer seen by Aperture, iPhoto or Image Capture.
Anyone have any idea on how we can mount these devices?

I have been running the Aperture 2.0.1 upgrade for some time now and still can't import Aperture albums. It's all or nothing.
Does anyone else continue to have the problem after upgrading to 2.0.1?
Thanks

Macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner

macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem

macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem

Problem with camera driver

Product Name:
HP Pavilion DV3-4009EE
Operating System installed:
Windows 7 64-bit
Error message:
"the camera is not exist"
Changes made to my system before the issue occurred
I did a mistake and I uninstalled the Camera driver from the Device Manager and deleted from System.ini !
and I want to get back the driver

Product Name:
HP Pavilion DV3-4009EE
Operating System installed:
Windows 7 64-bit
Error message:
"the camera is not exist"
Changes made to my system before the issue occurred
I did a mistake and I uninstalled the Camera driver from the Device Manager and deleted from System.ini !
and I want to get back the driver

Vista Camera Driver leaks LOTS of handles

Similar Messages

Maybe you are looking for