Vista - Connected with Limited Access???
Please help!!! This problem is driving me mad. Every time I try to connect to the router whilst wireless it says "Connected with Limited Access"? I then plug the cable back in and "ta dah" it works fine. I have tried almost everything and cannot understand the problem - can anyone help?
try this one out.. click start >> networks >> network and sharing center >> manage my wireless network >> and on this page remove all wireless networks listed and restart your PC.
Similar Messages
-
I have a toshiba lap top computer with vista and I can not get my new iphone to connect all the way .... it says "connected with limited activity". which means I don't get on. Any help would be appreciated. Thanks.
Hi all,
Guess I understand what is going on as I'm also experiencing the problem.
Basically the issue is about the iPhone 4's personal hotspot.
I'm trying to hook on personal hotspot to my toshiba laptop but it couldnt work as the connection is limited to local only without Internet access.
The hotspot works well on other laptop and I-devices, but not my toshiba...
Hope to get assistance here. Thanks -
I have a 2007 iMac running OS X Lion, all latest updates and patches applied.
My daughter has an account on the system, which I have limited to only being able to be used for a few hours a day.
The problem arises when she leaves herself logged in, but walks away, and the time runs out. When I sit down at the console, the first thing that happens is that the cursor disappears, and the systems starts to go into a logout. Makes sesne so far, I guess. However, the system then goes into what I can only presume is some sort of loop. The cube animation starts, and rotates back and forth several times between two screens, both equally hessian wrapped, with no distinguising features.
I can log into the system via ssh, and I can confirm that the system is spiking out on SecurityAgent:
Processes: 661 total, 5 running, 29 stuck, 627 sleeping, 2082 threads
19:59:08 Load Avg: 1.68, 3.07, 5.24 CPU usage: 43.38% user, 23.52% sys, 33.8% idle SharedLibs: 3620K resident, 1948K data, 0B linkedit.
MemRegions: 104350 total, 1295M resident, 189M private, 2974M shared.
PhysMem: 1166M wired, 3312M active, 1655M inactive, 6133M used, 9560K free.
VM: 1611G vsize, 1118M framework vsize, 34169473(356) pageins, 5796949(92) pageouts.
Networks: packets: 100372238/47G in, 162918821/146G out. Disks: 23914908/3252G read, 27697160/2570G written.
PID COMMAND %CPU TIME #TH #WQ #PORT #MREG RPRVT RSHRD RSIZE VPRVT VSIZE PGRP PPID STATE UID FAULTS
27013 SecurityAgen 98.0 37:41.27 2/1 1 88 84 508K 3904K 2664K 31M 2410M 27013 1 running 92 3028
28561 top 25.9 02:27.05 1/1 0 32 43 3752K 216K 4176K 20M 2381M 28561 28505 running 0 1924014+
1 launchd 4.6 50:43.63 3 0 3159- 343 2804K+ 2836K 2128K+ 15M+ 2405M 1 0 stuck 0 553252+
0 kernel_task 1.5 08:01:03 71/2 0 2 976 14M 0B 595M- 15M 5487M- 0 0 running 0 23008
197 WindowServer 0.7 01:57:50 5 1 6653 6448 22M+ 885M 486M+ 137M 40G 197 1 sleeping 88 25934192+
18548 Transmission 0.5 01:59:18 7 1 175 372 10M 7352K 16M- 47M 2550M 18548 282 sleeping 501 10297632
14 opendirector 0.4 02:27.27 13 13 617+ 108+ 6072K+ 1872K 6860K+ 32M+ 2417M+ 14 1 stuck 0 407028+
25117 mcxalr 0.2 00:40.33 4/1 3 43 41 200K 252K 1780K 30M 2391M 25117 1 running 54 1580
26441 SecurityAgen 0.2 00:01.55 2 1 121 245 2856K 19M 6820K 35M 2503M 26441 1 stuck 92 27427
28001 ManagedClien 0.1 00:00.11 4 3 98+ 86 1196K+ 4900K 3748K+ 31M 2413M 28001 27998 sleeping 0 3718+
294 UserEventAge 0.1 00:20.22 3 1 212 140 976K+ 3964K 2632K+ 34M 2422M 294 282 sleeping 501 294201+
28006 ManagedClien 0.0 00:00.11 4 3 97 86 1184K+ 4904K 3700K+ 32M 2414M 28006 28003 sleeping 0 3725+
28573 mdworker 0.0 00:00.41 4/1 2 55 101 8648K 6052K 13M 38M 2422M 28573 28443 running 89 4766+
27831 loginwindow 0.0 00:00.50 4 2 153+ 108+ 1692K+ 4804K 3252K+ 35M+ 2425M+ 27831 197 sleeping 0 4875+
15 configd 0.0 00:33.57 6 1 2316 230 2392K 1788K 3524K+ 27M 2420M 15 1 sleeping 0 320735+
28318 loginwindow 0.0 00:00.54 3 1 151 101 924K+ 4712K 3120K+ 33M+ 2423M 28318 197 sleeping 0 4778+
Now, obviously, because I can ssh in, I can start a clean shutdown and restart, but I'd like a way to do this that doesn't involve me bringing down the system, when the whole point of multiple users and parental controls is that a system can be shared cleanly.
Thoughts?
Thanks,
WillSee if this blog post that our support team created helps you with the connection information. This can create the desktop Access application linked up to the Access 2013 web app tables you have.
http://blogs.technet.com/b/the_microsoft_access_support_team_blog/archive/2014/03/24/how-to-make-external-connections-to-an-access-web-app-new.aspx
Also, you might just try clicking the Create Reports button in the Access web app client interface and Access will create the reporting database for you with links to the web app tables. On the File menu (when using the Access web app in client) make sure
to click the option to Allow Any Location under the Manage button. After that, just click the Create Reports button on the File menu (right above the Manage button) and wait a few seconds. Access will create a new desktop database linked up to all of the Access
web app tables. You can then create as many reports or other desktop objects as you like.
Hope that helps,
Jeff Conrad - Access Junkie - MVP Alumnus
Senior Content Developer - Office Content Development Team - Microsoft Corporation
Author - Microsoft Access 2013 Inside Out
Author - Microsoft Access 2010 Inside Out
Co-author - Microsoft Office Access 2007 Inside Out
Access 2007/2010/2013 Info: http://www.AccessJunkie.com
This posting is provided "AS IS" with no warranties, and confers no rights.
Use of included script samples are subject to the terms specified at
http://www.microsoft.com/en-us/legal/Copyright/Default.aspx -
Nokia 616 connected with Sim Access to HTC Touch P...
I have problems by connecting my HTC Touch Pro to my Nokia 616 with SIM Access (As Bluetooth Handsfree OK). It works with a 2G simcard but not with 3G sim-card. Is there any solution??
Hi victorcarlsson
Unfortunately there is little likelihood of any progress in this direction.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
Odbc-connection with ms-access
hello,
this is my problem
if I migrate an MS Access db to Oracle with the OMW than is the ODBC connection, from MS Access to Oracle, perfect.
Bud I have used the migration script witch is generated by OMW and by made a connection from MS Access to Oracle in some tables the ODBC connection Failed.
What is the problem????
Thanks
AndreYou don't need MS Access installed to use the JDBC-ODBC driver.
-
How to connect with Microsoft Access Database with JAVA
I want to know the command and query to connect between MSAccess and JDBC.
Is it beter way to make connection with MSAccess comparing with other Databases such as SQL and Oracle.
Which Database will be the best with Java?
I also want to know to be platform indepadent which database is suitable?On Windows, you can use MS Access database by:
Set up a System Data Source using the ODBC control panel applet.
Use the jdbc:odbc bridge JDBC driver, and specify a jdbc url that points to the data source name you just specified.
It's been too long since I've done this, so I don't remember the syntax of the jdbc url, but I'm sure that if you do a search for the jdbc:odbc bridge that you will find what you are looking for.
As far as the question about which database is best, you will need to determine that based on your project requirements.
If you want a quick and dirty, open source, cross-platform database, take a look at HyperSonic SQL.
- K -
Add user in ACS with limited access
Dear
I have low experiance with cisco ACS
So kindly i need help to add user to The ACS which has limited access to my network Switches ( As Show only not to change configuration )
Also how to take backup for the ACS Database
Thanks,Hi,
Search about command authorization in the AAA section, you'll get ample information about it, i.e., on how to configure network devices so that you can allow certain users on ACS to have limited and certain user to have full access.
About taking a backup, that is pretty simple.
System Configuration > ACS Backup > Backup Now.
And you have a latest backup from ACS.
Regards,
Prem -
MSI GT70 with Limited Access Internet Problem
Hi I'm using MSI GT70-0ND
everything working fine but yesterday I did upgrade window 8 ---> 8.1 and Ethernet Lan still working. anyway when I'm using wifi i can't it say limited access (before I changed it to window 8.1 i can use wifi) so I refresh my notebook to turn window 8.0 again hope can solve this problem
but this change makes problem because I can't use internet lan and wifi too
the way i did(but it can't be solved)
1.uninstall killer network
2.restart
3.try use cleaning killer x64
4.restart and then
5.install bigfootkiller network( i try all firmware but it still problem)
i don't know how to do it (and this icon also have yellow mark) so what i should do
thank you.(sorry for bad english)No resurrections please
>>Please read and comply with the Forum Rules.<< -
Windows Vista conflicting with Clean Access?
When I try to log into Clean Access to use the internet, it gives me an error message saying that in order to fulfill all of my requirements and get into the system, I need to download windows defender. But Windows defender comes with Windows Vista, which is what I have...So when I try to download Windows Defender and install it, it gives me a popup saying that I already have it on my comnputer and that I don't need to download it. Any ideas? Anybody? Please? Am I even in the right place for this kind of question?
If you using Windows Vista,You already have windows defender. Ensure the version of the defender because if Windows Defender informed you that an update is available, you are running an older version.
Below are Windows Vista Supported Antispyware Product as of the latest release of the Cisco Clean Access software.
Product version - 1.x
AS Checks Supported
(Minimum Agent Version Needed) are:
Installation - (4.0.5.0)
Spyware Definition - (4.0.5.0) -
Can We connect MS Access Database
with Oracle Forms 4.5/5/6/6i ?
if yes then how ? or Forms support any database
except oracle ?
regards
ketanLook for a file called oca_info.pdf on your install. This is the file which tells you about connecting to non oracle dbs.
Regards
Grant Ronald
Forms Product Management -
Connection with Microsoft Access using Java on Linux
Hi,
I am very new to Linux & trying to move my application from Windows to Linux.
I am downloading one database(*.mdb) file from an url & want to select records from tables & add them to my My Sql database.
Is there any way to connect to Access database on Linux machine ( Without using different Windows machine having Ms Access installed).
Thanks in advance.
Regards,
VeenaI am having the same problem.
jackcess worked fine with Access 2000.
But i want to work with Access having previous version (probably 97).
Is there any way to do this? -
External hard drive with limited access
I have a MacMini running Leopard 10.5.8 and have 3 external storage devices.
Yesterday, I turned on the one with my media files, Samsung Story 1GB, I got a warning.
Then, I tried Disk Utility but repairing options were grayed out except Verify Disk.
When I tried that, I got another warning. (I tried to get the screenshots)
When I click "Get Info" on the Samsung, everything is grayed out.
I can access the files, but can't edit or move any of them.
Going thru some forums, being very unfamiliar with Terminal, I nevertheless entered
ls -alOe /Volumes in the Terminal screen and got the following.
james-belgins-mac-mini:~ jamesb$ ls -alOe /Volumes
total 8
drwxrwxrwt@ 4 root admin hidden 136 2 Jul 02:36 .
drwxrwxr-t 35 root admin - 1258 2 Jul 02:32 ..
lrwxr-xr-x 1 root admin - 1 2 Jul 02:31 Macintosh HD -> /
drwxrwxr-x@ 35 jamesb staff - 1258 27 Jun 18:00 SAMSUNG
0: user:jamesb allow list,add_file,search,add_subdirectory,delete_child,readattr,writeattr,readextat tr,writeextattr,reads ecurity
james-belgins-mac-mini:~ jamesb$
I can't reformat the disk as I would lose all data. The free space on my Mac's hard drive is not big enough for copying all files and I have no way of getting a new external soon.
Can anybody help me please?I did a quick Google for 'invalid key length' and as far as I can tell you have two options:
1 - Repair with DiskWarrior
2 - Backup disk and erase / reformat -
My wifi connection shows limited access after updating my window 8.1
Hy wishes for all of you. Having trouble after update my window 8 to 8.1. Perhaps the wrost day of my life. After update lost my Internet connection. It's shows limited connection and unindentify network. I search different post on Web regarding this problem and applied but all in vain. I would like to restore my old window but I don't have backup so now have true in trouble kindly help me out
Would be thankful to all of you
RegardsHi:
If you live in the USA, you can order recovery media by clicking on the link below, select the W8 operating system, click on Order Recovery Media.
http://h22207.www2.hp.com/us-en/drivers/selfservice/hp-envy-m6-1100-notebook-pc-series/5296045/model...
Did you try this W8.1 wireless card driver?
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_142231_1#tab1 -
Wireless connection with limited range
My ibook g4 has very limited range when using our wireless network. I'm able to connect to the wireless router when I am right next to it, but when I move away a bit, the connection drops down to 1 or 0 bars. I have another Dell laptop that connects to the network fine in other rooms throughout the house, so I'm assuming the router is fine and something is not setup right on the ibook? I have updated all of the software already, but that didn't solve the problem. Any suggestions?
Thanks!Hi,
Welcome to the Discussions.
That usually indicates an improperly attached antenna. It take considerable force to get the connector all the way in. This article illustrates a properly attached antenna. The AE card is located below the keyboard. Pull back on the latches next to F1 and F11 and lay the KB upside down on the track pad.
John -
Problem in connection with MS Access
when i am running the sample code below in jsp page using tomcat
as a webserver . no error is displaying i am getting the html page
displayed. but data is not retriving from the database.i use
Connection con= DriverManager .getconnection "jdbc:odbc:Database")- but no use no error no data retrival can any body help me
<%@ page session="false" %>
<%@ page import = "java.util.Calendar" %>
<%@ page import="java.sql.*" %>
<%
try{
Class.forName ("sun.jdbc.odbc.jdbcodbcdriver");
catch(ClassNotFoundException e)
System.out.println(e.toString());
%>
<html>
<head>
<title> DISPLAYING THE USER NAMES </title>
<body>
<center>
<br>
<br>
<h3 align=center> Users for the laptop </h3>
<table>
<tr>
<th> FIRST NAME </th>
<th> LASTNAME </th>
<th> USERNAME </th>
</tr>
<%
String sql = "SELECT * " +"FROM Users";
try {
String url = "jdbc:odbc:DRIVER={Microsoft Access Driver (*.mdb)};DBQ=c:\\Datbase.mdb";
Connection con=DriverManager.getConnection(url);
Statement s =con.createStatement();
ResultSet rs = s.executeQuery(sql);
while (rs.next())
%>
<tr>
<td> <% out.print(rs.getString(1)); %> </td>
<td> <% out.print(rs.getString(2)); %> </td>
<td> <% out.print(rs.getString(3)); %> </td>
</tr>
<%
rs.close();
s.close();
con.close();
catch(SQLException e)
catch(Exception e )
%>
</table>
</center>
</body>
</html>Although for all your claims about no errors I see that this time your code shows empty catch blocks so really you don't really know that.
Please do something (print something anything, a stack trace) in that catch block.
Maybe you are looking for
-
Keynote not sending video out on my ipod touch 3gen.
Im using the av cable. It works great with the photos app, i can see the photos slide show in the projector. But it looks like keynote is not recognizing the cable or something else, it just dont sends the video out. Is there any setup that I'm missi
-
Failure to connect to FTP server using FTP Adapter?
Attempting to setup a SOA 11g composite app to demo the use of a FTP Adapter. Composite used a File Adapter (Read, opaque schema) wired to a mediator which was wired to a FTPAdapter (ASCII-Put, opaque schema). The routing rule in the mediator maps th
-
GRC AC Maintain Configuration Settings for BRM
Hello all! I´m folowwing the guide http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0025394a-1564-2e10-2c97-accc8cfd6888?QuickLink=index&- (AC 10.0 Pre-Implementation) and have a doubt. At page 11 the guide shows one screen whit var
-
How to upgrade iWeb 2.0.4 to 3.x
Hi, I bought a MacBook 2008 early. This MacBook include iWeb 2.x. Last month I upgraded some iLife '08 application to '11 but I couldn't upgrade iWeb '08 to newer. Last iWeb version is 3.0.4. How can I upgrade iWeb 2.x to 3.x? Please help me! Thx! Ba
-
MRP - MD04 and special stocks - how to manipulate exclusion in Avail.Stock
Hello, I have the following question about the Avalable stock which appears in the MD04 trx. for a material in a Plant. This Stock Available normally includes stock "Unrestricted Use" and one can customize the inclusion of Blocked Stock, Restricted u