Vista/Dreamweaver MX

I am using Windows Vista with Macromedia Dreamweaver MX. The
program installs, and launches just fine, but when attempting to
create a Table I get this error;
"A sharing violation has occurred with
C:\Users\(Username)\AppData\Roaming\Macromedia\Dreamweaver
MX\Configuration\Objects\Common\Table.htm."
The Table.htm file is currently a 0KB file.
After trying to create a table, I have to restart Dreamweaver
to even try again.
Any ideas as to what is going on?

DMX predates Vista by about 5 years. I guess that's what's
going on.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"withoutadoubt" <[email protected]> wrote in
message
news:es6sh4$fl3$[email protected]..
>I am using Windows Vista with Macromedia Dreamweaver MX.
The program
>installs,
> and launches just fine, but when attempting to create a
Table I get this
> error;
>
> "A sharing violation has occurred with
>
C:\Users\(Username)\AppData\Roaming\Macromedia\Dreamweaver
> MX\Configuration\Objects\Common\Table.htm."
>
> The Table.htm file is currently a 0KB file.
> After trying to create a table, I have to restart
Dreamweaver to even try
> again.
>
> Any ideas as to what is going on?
>

Similar Messages

Vista Dreamweaver and Access database

I am trying to connect an Access database to an aspx-page in
Dreamweaver and
all I get is 'The program has stopped working'
How can I avoid this?
reidarT

I am trying to connect an Access database to an aspx-page in
Dreamweaver and
all I get is 'The program has stopped working'
How can I avoid this?
reidarT

I'm having a problem with inserting a photo gallery created with Bridge

I sure could use some help.
Adobe Bridge - Why do I have a white bar on my page?
I am using windows vista, Dreamweaver cs4 and Adobe bridge to insert a photo gallery.
I am using an I-frame to embed a photo gallery that was created with Adobe Bridge CS4. Adobe Bridge instructed me to make the i-frame height = 75% of the width. The code is <iframe src="PhotoAlbum/index.html" width="900" height="675" frameborder="0"></iframe>
my css places the album in #photoalbum.
#photoAlbum contains the i-frame with the following properties:
#photoAlbum {
margin-top: 20px;
margin-right: auto;
margin-bottom: 0px;
margin-left: auto;
width: 900px;
text-align: center;
padding-top: 20px;
padding-bottom: 20px;
border-top-width: 2px;
border-top-style: groove;
border-top-color: #333;
I tried changing the width to 960, 900, 850 etc with no success.
I have tried making the background of #photoAlbum black with no success.
The link to the photo album is http://www.gigharborrealestate.com/smith/PhotoAlbum/index.html and shows no white bar.
The site that I am having problems with is http://www.gigharborrealestate.com/smith On the right side of the Point Richmond Photo Gallery is a white vertical bar. If you go to /PhotoAlbum/index.html there is no white bar.
Why does this bar show up when /PhotoAlbum/index.html is put into an I-frame? How can I get rid of the vertical bar?

insert the following into your code,
scrolling="no"
it should look like this
<div id="gallery"><iframe src="IMAGES/Adobe Web Gallery/index.html" scrolling="no" width="730" height="555" frameborder="0" name="web_gallery" style="background-color: #D8D9B4"></iframe></div>
hope it helps, good luck

CS6 unable to un-install an extension

I wanted to upgrade a Dreamweaver Extension to a newer version.
(Extension: WebAssist Databridge on Windows Vista - Dreamweaver CS6 in CS6 Design Premium)
First I tried to uninstall the existing version (v.1.1.2) using Extension Manager.
After waiting for more than an hour I aborted the process using Windows Task Manager.
I then installed the new version (v.1.1.3)
However, I'm now in a muddle because both versions seem to be showing on in Extension Manager (via Manage Sets) - but I'm unable to remove either:
Outside of Manage Sets I just see the old version - with Enabled unchecked and a yellow triangle showing. The mouse-over message with the triangle is 'Extension status is not consistent with extension set configuration)
When I try to remove either I get the message 'The specified extension 'WADataBridge.mxi' is not installed'.
When I click OK in the message box - I just get returned to Extension Manager.
When I click 'Manage Sets' both versions are listed - but Delete is greyed out - All that is available is Duplicate Import and Export.
Can anyone explain how I can un-install these extensions? (to enable me to install the latest version properly)

Thanks Carl. To resolve the problem I uninstalled 'Desigh and Web Premium CS6' and re-installed. This allowed me to sucessfully install the extension.
Of course the real problem here was the amount of time it took to un-install the extension - Web Assist Support thought that Norton Internet Security might be to blame.
If I get the problem again, perhaps I'll try your suggestion above - although I noticed that InDesign seems to install numerous extensions - which might be at risk using this approach?.
Many Thanks

Flash Video Not Working in LMS

Hi,
When I preview my project, the flash video I inserted into the widget plays fine. When I publish the project onto our Learning Management System server, the video plays fine.
However, when I go into the LMS course, the video does not play, while the audio does.
Any thoughts?
Thanks,
rtn507

Firefox tells me -
AC_FL_RunContent is not defined
[Break on this error] AC_FL_RunContent(
'codebase','
http://download.macromedia.com/pub/shockwave/cabs/...
That function is defined here -
<script src="../Scripts/AC_RunActiveContent.js"
type="text/javascript"></script>
When I browse here -
http://www.zabell.se/Scripts/AC_RunActiveContent.js
I get a file not found.
'nuff said?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"KajanZ" <[email protected]> wrote in
message
news:gbgtrp$1eg$[email protected]..
>I have tried to insert a flash video film with Media/
Flash Video without
>any
> good result. The adress
http://www.zabell.se/video/video.html
. All files
> are
> on the server but I cant see the video.
> I have Vista, Dreamweaver Cs 3, Maybe thats the problem?
> Can I please have some advise whats wrong, Regard from
Sweden/KajanZ
>

Dreamweaver Flash Buttons / Frame Navigation in VISTA

Hey, I use some standard flash buttons from Dreamweaver to
navigate. I have two frames in this web. The buttons are in frame
"A" and refer to a target in frame "B". This worked perfectly fine,
even with IE 7 in Windows XP it still works. But in Windows VISTA
every button opens a new browser windows.
Windows VISTA, IE 7, Dreamweaver 8, running the web on my HD
Thanks in advance.
Sky

If you want to use Flash for navigation, consider this -
1. Some people don't have Flash installed - what do they do?
2. Search engines don't parse Flash links - your site will
not be spidered
3. Screen assistive devices don't parse Flash links - what
will those users
do?
4. DW cannot maintain links within a Flash movie, so if you
move or rename
a linked file, your navigation will break - what will you do?
It's usually a very bad idea for these reasons...
Adding in frames makes it even worse - you are in the deep
stuff here. Why
are you using frames?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"LeichterLernen" <[email protected]> wrote
in message
news:er5fua$3am$[email protected]..
> Hey, I use some standard flash buttons from Dreamweaver
to navigate. I
> have two
> frames in this web. The buttons are in frame "A" and
refer to a target in
> frame
> "B". This worked perfectly fine, even with IE 7 in
Windows XP it still
> works.
> But in Windows VISTA every button opens a new browser
windows.
>
> Windows VISTA, IE 7, Dreamweaver 8, running the web on
my HD
>
> Thanks in advance.
>
> Sky
>

Dreamweaver and Windows Vista Problem

Hello,
I ran into a problem with my Dreamweaver - 8 application and
cannot find a fix. I open up the Dreamweaver application, 2-3
seconds later, I get the following error message, “A problem
caused the program to stop working correctly, windows will close
the program and notify you if a solution is available.” I am
using Windows Vista and believe the problem is associated with the
Vista operating system. I am puzzled by the fact that I have been
using Dreamweaver with Vista and have had no problems up until now.
I uninstalled & reinstalled Dreamweaver to no avail. I
restored my computer to an earlier date, and updated Dreamweaver,
and still have the same problem.
Any help to resolve this problem would be greatly
appreciated.
Steve
Text
Text

Hello Again,
I finally fixed the problem. I went into my network settings
and reset my network address. This did the trick, I went back and
opened up Dreamweaver without any problem.
Steve

Is Dreamweaver compatible with Windows Vista?

No matter what I do I can't insert text into Dreamweaver. I'm
beginning to think Dreamweaver is not compatible with Windows
Vista. I can type text into it but I can't write a document in
another program then insert it into a DW page. It just won't do
anything at all. I've watched about 4 videos on this and read many
things on Dreamweaver help and can't find it. I think it might be
easier to learn html than Dreamweaver. I can't find any good
Dreamweaver tutorials, even in Lynda.com. They all teach as if you
already know most of the program.

Where are you copying the text FROM? Which app?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"bob e kimball" <[email protected]> wrote in
message
news:ginjdm$q8g$[email protected]..
> No matter what I do I can't insert text into
Dreamweaver. I'm beginning to
> think Dreamweaver is not compatible with Windows Vista.
I can type text
> into it
> but I can't write a document in another program then
insert it into a DW
> page.
> It just won't do anything at all. I've watched about 4
videos on this and
> read
> many things on Dreamweaver help and can't find it. I
think it might be
> easier
> to learn html than Dreamweaver. I can't find any good
Dreamweaver
> tutorials,
> even in Lynda.com. They all teach as if you already know
most of the
> program.
>

Dreamweaver CS3 hangs on "initializing files" in Windows Vista Home Premium

Hi,
Anybody else encountering this issue? I noticed this7 error
in Windows Vista Home Premium. When you launch Dreamweaver CS3, it
opens the splash screen, displays “initializing files”
and thats it.
Necessary Troubleshooting steps we’re already done to
attempt to launch/fix the program but to no avails.
seems the problem happens on acer computers with 4 gigs of
ram.
You can check it from this
Thread
Thanks! I hope someone from engineering can take a look at
this issue!

A little more on this topic with solution ...
http://sidapolinario.unicpinoy.com/2008/05/09/dreamweaver-cs3-some-emmerging-issues/
Regards.
Patrick.

Connection String Problem with Dreamweaver CS4 and Vista Compatability?

Hi,
I am receiving the below error when viewed in the browser.
I am running this under Vista Home Premium and IE7 with IIS
7.0
and I am using DreamweaverCS4. Please help me can we fix
this.
Thanks in Advance.
error '80004005'
/test/index.asp, line 8
Code looks like below in connTest.asp page:
<%
' FileName="Connection_odbc_conn_dsn.htm"
' Type="ADO"
' DesigntimeType="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
Dim MM_connTest_STRING
MM_connTest_STRING = "dsn=dsntest;"
%>
Code looks like below in ASP page:
<%@LANGUAGE="VBSCRIPT" CODEPAGE="65001"%>

<%
Dim rsTest
Dim rsTest_cmd
Dim rsTest_numRows
Set rsTest_cmd = Server.CreateObject ("ADODB.Command")
rsTest_cmd.ActiveConnection = MM_connTest_STRING
rsTest_cmd.CommandText = "SELECT * FROM testtlb"
rsTest_cmd.Prepared = true
Set rsTest = rsTest_cmd.Execute
rsTest_numRows = 0
%>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0
Transitional//EN" "
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="
http://www.w3.org/1999/xhtml"
xmlns:spry="
http://ns.adobe.com/spry">
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=utf-8" />
<title>Untitled Document</title>
<script src="SpryAssets/SpryData.js"
type="text/javascript"></script>
<script src="SpryAssets/SpryHTMLDataSet.js"
type="text/javascript"></script>
<script type="text/javascript">

</script>
</head>
<body>
<p><%=(rsTest.Fields.Item("Field1").Value)%>
</p>
<p><%=(rsTest.Fields.Item("Field2").Value)%></p>
<p><%=(rsTest.Fields.Item("Field3").Value)%></p>
<p> </p>
<p><%=(rsTest.Fields.Item("Field4").Value)%></p>
</body>
</html>
<%
rsTest.Close()
Set rsTest = Nothing
%>

"srikanth1058" <[email protected]> wrote in
message news:go0qd7$cg1$[email protected]..
> Hi,
>
> I am receiving the below error when viewed in the
browser.
> I am running this under Vista Home Premium and IE7 with
IIS 7.0
> and I am using DreamweaverCS4. Please help me can we fix
this.
>
> Thanks in Advance.
>
>
> error '80004005'
>
> /test/index.asp, line 8
>
>
Follow the instructions on the following page - and the
linked pages - and see if that helps:
http://blogs.iis.net/bills/archive/2009/02/20/more-tips-and-troubleshooting-help-for-class ic-asp-developers.aspx
Ken Ford
Adobe Community Expert - Dreamweaver/ColdFusion
Adobe Certified Expert - Dreamweaver CS3
Adobe Certified Expert - ColdFusion 8
Fordwebs, LLC
http://www.fordwebs.com
http://www.cfnoob.com

Is there a patch to help Dreamweaver work without problems in vista?

Please let me know if there is a patch I can download to make
Dreamweaver compatible with Vista. The problems are numerous and
are driving me nuts at the moment. Can you upgrade to DW CS3 from
the website?
Nick.

There are many of us who are running DW without problems in
Vista. What
problems are you having? Which versions of Vista and DW are
you running?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Megisti" <[email protected]> wrote in
message
news:evf3v1$1nj$[email protected]..
> Please let me know if there is a patch I can download to
make Dreamweaver
> compatible with Vista. The problems are numerous and are
driving me nuts
> at the
> moment. Can you upgrade to DW CS3 from the website?
>
> Nick.
>
>

CS5 Dreamweaver on Windows Vista. Will not open at all. Please advise

CS5 Dreamweaver on Windows Vista. Will not open at all. Been fine until now. No recent updates on computer, other Creative Suite software all work fine too.
I have the Student package installation so I am unable to uninstall then re-install as one off set up. Or is it possible to get the re-installation on a student package, and if so will I have to re-install everything?
have been using Dreamweaver only two months ago and now it is will not open. I do not get anything on the screen, no egg-timer or anything. Tried to look up online to solve problem, but no joy.
Please advise....
James

When DW starts acting weird, the first thing to try is Deleting Corrupted Cache in DW
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences. Note: your work space, custom settings & 3rd party extensions will be wiped out by this. So make backups of anything you need to keep.
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CS Cleaner Tools below followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Good luck!
Nancy O.

I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

Hi rmarchione,
Can you try restoring preferences and let us know if it helps?
Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
Thanks,
Preran

Dreamweaver MX 6.1 Closes When Click on Help or Commands in Vista

Just got a new machine - running Vista with Dreamweaver MX
6.1. When I click on the Toolbar - on Commands or Help - it closes
the program. I just installed the updater to make it 6.1 - but it
didn't help.
Any ideas?
Jess

DMX predates Vista by at least 4 years. You may be out of
luck.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jslist" <[email protected]> wrote in
message
news:g7i1fj$625$[email protected]..
> Just got a new machine - running Vista with Dreamweaver
MX 6.1. When I
> click
> on the Toolbar - on Commands or Help - it closes the
program. I just
> installed
> the updater to make it 6.1 - but it didn't help.
>
> Any ideas?
> Jess
>

Cannot install Dreamweaver CS3 on Vista

I'm running a desktop PC with Windows Vista Premium. I had
Dreamweaver 8 installed and want to upgrade to Dreamweaver CS3. So
I uninstalled Dreamweaver 8 and ran the setup for CS3. After the
setup extracted all he necessary setup files I saw a message saying
"initializing setup" and then...nothing. Setup just quit. I tried
several times. I've never installed any of the CS3 beta
versions...but I ran the CS3 cleanup anyway. No luck. Searched the
registry for any extra Dreamweaver entries. Nothing. The only Adobe
software I have installed is Acrobat 8 Pro and Photoshop CS2. Just
can't get Dreamweaver CS3 to install. Any ideas?

See if this helps:
http://www.adobeforums.com/cgi-bin/webx?128@@.3bc3b755
Search for the post by gorodek about modifying the
ContainerProxy.js file.
It seems to have solved the problem for several Photoshop
users, and it's
solved the problem for some DW users as well.
Hope this helps,
David Alcala
Adobe Product Support

Vista/Dreamweaver MX

Similar Messages

Maybe you are looking for