Vista Driver for Live Motion

http://ask.creative.com/wwenglish/vi..._matrix_de.htm WebCam Live! Motion32-Bit Treiber Q4 CY2007?64-Bit Treiber TBC Q4 2007 Its a bad joke, isn't it?

Hello, i've had my Creative Live Motion working fine under Vista for weeks until today after i have uninstalled the Logitech Quickcam software from my computer (as it doesn't work with my Sphere only the new Sphere MP). After that the Creative driver stopped working, i have searched around on internet and in this forum and looks like everybody have the same problem under Vista. after having tried everything else I have decided to reinstall the latest Logitech Vista driver :http://www.logitech.com/index.cfm/do...,contentid=003 and then the 2000/xp driver for the Live Motion from Creative website which finally installed correctly and is again working fine. I have developped webcamXP and i've been using this driver under Vista for days without interruptions and without any problems, everything is working fine including the directX functions to control the pan and tilt through software. This worked for me i hope it'll work for you

Similar Messages

How to get the Windows Vista Driver for ATI Radeon 7500 card?

How to get the Windows Vista Driver for ATI Radeon 7500 card?
I am using a IBM Thinkpad T42 with a 32Mb ATI Radeon 7500 graphic card AGP.
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Thank you.
regards,
W. Thong

wthong wrote:
How to get the Windows Vista Driver for ATI Radeon 7500 card?
The Radeon 9000 driver works for the Radeon 7500 card. I have successfully used it on a T43 with Vista Ultimate x86
wthong wrote:
Is there any Vista 32-bit driver to update my card so that this system support Aero effect?
Unfortunately no. The Radeon 9000 driver should bring your graphics score up to close to 2, but it will not get it high enough to enable Aero support.
Cheers,
Bill
I don't work for Lenovo

Problems with the Vista Driver for Audigy 2

Hello erverybody,
today I installed Vista Ultimate 32bit. With the result that the applications and drivers of my Creative CD don't work. I downloaded the new Vista Driver for my Audigy 2 ZS but I must find out that there are no DTS, EAX and also no CMSS 3D Support integrated is.
I could only choose the option CMSS in the audio console but no CMSS 3D as i have it under windows xp.
My question to Creative, is it planed that these features will be supported with vista in the future or can i take my soundcard to the garbage ?
LG BenMessage Edited by Gnubbel85 on 06-05-200706:55 AM

There is some kind of unofficial driver version located here: I'm currently downloading it and I'll?try. Part http://files.filefront.com/SBAXWXCD+R2partrar/;8604885;/Part2: http://files.filefront.com/SBAXWXCD+R2part2rar/;8606942;/?Since there seems no official way of using my hardware's?DTS and Dolby Digital decoding function on Vista and this is common for all Audigy. I have Audigy 2 ZS plat. , I love?this card It sounds best in the world but Creative has failed to satisfy its customers on Windows Vista. A company has to make its customers feel special, I don't think I'm going to buy another Creative product?if this issue is not resolved.

Vista Driver for Webcam Pro Ex

I have a Webcam Pro Ex, and Vista is complaining every time that there is no driver for the camera (unidentified device). I thought that by now there would be drivers for the device. Where can I find them?

Here is the site that you can download the driver for Webcam Live! Pro
The driver only supports until Windows XP, but I think your webcam should be able to be auto detected in Windows 7 and Windows 8. So you may not need to install any driver if you are using Windows 7 and Windows 8.

Need Vista driver for CD/DVD SuperMulti Drive PA3761

Hi there,
hoping you can help me.
I've just purchased an external CD/DVD drive - PA3761 - the SuperMulti Drive.
When first connected to my PC - running VISTA - the computer searched for drivers to install and then came back with the message - no drivers found please install.
Looking at the Toshiba website I can't seem to find any reference to this product or drivers for it.
Can anyone please help?
thanks,
Justin

hi JWestcott,
seems to be that there is no driver for vista available....
go to the device manager and find out which device code (dev_yyy&pid_yyy) is shown maybe you can search for...
there might be a generic driver for the usb chipset....
try the downloadpage for other countries as well....

Replacement for Live Motion?

I used Adobe Live Motion on my old mac but can't on my new MacBook Pro, has anyone any suggestions for a simple replacement?
Live Motion was easy to use but am not sure about the new products.
Any help much appreciated. Thanks in advance.

Motion (bundled with FCS) has all the capabilities of LiveType and much, much more.
-DH

Windows Vista Driver for Sound Blaster 5.1 P

I want driver for Windows Vista 32 Bit edition for Sound Blaster 5. PCI sound card. I have loaded the Windows XP driver but as a result of that it is playing audio in 2 speaker stereo mode, but i have creative 5. speaker system. As a result of that sound is coming almost only from the front two speakers. Creative MIXER is also not working. Please suggest a solution.

Hi daniel_k , the driver works fine but there's a little problem : when i reboot , the startup process stops at about 50 percent (stops responding)?, when i launched the startup repair utility which takes about 0 mins to complete , then the pc boots normally?. When i look in device manager , it says my sound card?has no driver installed?but when reinstalling your driver it's ok again ! The main problem is when i restart ! Please note that i reinstalled windows 7 and performed a clean install of the driver as you requested before this problem arises . Please?can you fix the driver or give another one . Thanks .

Satellite A100: I can't find Vista driver for Bluetooth

Hi all.
I have brand new Notebook A100 and I just replaced win vista by XP.
Nearly all of devices installed inside are operational using appropriate driver (downloaded from this site).
But I can't find driver for Bluetooth. When devicemanager launched, there is unknown device listed, labelled as acpi/tos6205/2&daba3ff&0.
Please, could you tell me if it really is BT and if so, how could I make it operational?
Thank you very much

Hi
The Bluetooth driver stack can be downloaded from the Toshiba page!
Either you will check the drivers section of your Toshiba notebook series or you will visit the Toshiba Bluetooth Information Center page:
http://aps.toshiba-tro.de/bluetooth/
regards

Need an Instrument Drive for Elmo motion control products.

Hello,
I am going to use a Bassoon servo drive from Elmo Motion Control to control a voice coil. I haven't found an Instrument Driver for Elmo through my LavVIEW program or on their website. Does an Instrument Drive for Elmo products exist?
Thank You!

Hello JMJ,
Here are my answers to your questions:
1. Is it possible for me to communicate with the Basic Serial Read
and Write example and not develop an Instrument Drive? I see that the
write VISA VI takes a string and converts it and sends it to the
control card and the read VI receives a signal and converts it. Is the
conversion converting from the Elmo language to the ASCII code? If I
don't write an Instrument Drive will I have limited capabilities?You could use the serial example to write your entire program. If you only need a handfull of commands, then this is probably the most straighforward for you to get going. Everytime you use the VISA Write, the ascii values are written on the serial lines and transmitted to your device. Your device reads and interprets these commands and acts depending on what the command is. Some command may change a setting in the instrument. Some other command may actually ask for the instrument to write back some data. In this case, you need to have a VISA Read after the write to be able to read the data into your computer.
2.  I was informed that there is an Instrument I/O Wizard that would
potentially be easier to use and program than an Instrument
Drive.  What is your opinion on such matter? Could I use either or
neither?You can definitely use the Instrument I/O Wizard to help you . This wizard really helps in parsing the data received from your instrument. You can look this tutorial if you want to learn more about it.   You could use either one. I suggest you try both these methods and see which one seems more obvious to you.
3. If I develope an Instrument Drive are all the seperate commands seperate subVIs?
A LabVIEW instrument driver usually has a set of VIs with specific functionality. For example, you will have one subVI that will initializes the instrument. This subVI may send 1 to 5 (or more) commands, depending on what you need to initialize your instrument. You can then have one VI that set's an attritube. This one would only require sending one command.   You can look at this tutorial for developping a complete instrument driver. However, keep in mind that this may not me necessary for your application.
I suggest you first look at what functionality you need. Then take a look at what commands this will require. You will then be able to plan out your program a little better. I also suggest you post all this information on the forum, so that we may be able to help you with more specific details.
Have a great day.
O. Proulx
National Instruments
www.ni.com/support

Vista Driver for Business Inkjet 1100

Does anyone know a workaround driver for the Business Inkjet 1100 on Windows Vista? I've tried the Business Inkjet 1000, but no go.

Hi,Try using the HP Printer Install Wizard and check if that may help:http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-PIW&jumpid=ex_r4155/en/hho/ipg/forum/piw/

Need Vista driver for Bluetooth dongle model: TechBlue1

Hi,
I recently got given a Technika Bluetooth dongle, model: TechBlue1 and it isn't supported by Vista.
Is there any updates or drivers that will allow this?

{color:#800000}*The Technika TechBlue 1 dongle uses a TOSHIBA Bluetooth stack. It will only partially install under Vista and there is an incompatibility warning box. I have been unable to find the Bluetooth stack version number. Is there a patch or fix or Vista driver available, please Toshiba? This dongle is sold by TESCO, one of the biggest UK supermarkets and there must be a large number of these dongles in circulation.*
{color}

Need Vista driver for SK-8815 Lenovo Keyboard

have gotten so used to my easy access buttons on XP.
Just upgraded to Vista and none of the buttons work...
Went to Lenovo's website and tried to pull up anything for the SK-8815 model keyboard but nothing is found.
Is it called something else?
Does anyoen know where I can find Vista drivers for the Sk-8815 model Lenovo Keyboard?
HELP
thanks

Found it...
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-71836
Whhen you download and extract the zipped .exe , there is a folder called Keyboard/Vista/x86 which has the setup you need.

Definitive Vista Driver for Sound Blaster Live!

Is there a "definitive" 3rd party driver solution for the Soun Blaster Live! 5. (including Dell Digital version) that enables all features including the digital out If no one agrees on a single solution can we get a list of options here. Here is what I have seen so far http://forums.creative.com/creativel...ssage.id=23567 http://forums.creative.com/creativel...scending&page= http://www.aeonity.com/david/creativ...vista-download Sound Blaster Live! - LiveDrvUni-Pack (English) KX project driver Anything else Which is best Anything new

Download Sound Blaster CD ISO?s:
http://hosted.filefront.com/BadBoyforum
Creative Li've! 5. Digital Drivers:
http://es.europe.creative.com/support/downloads/welcome.asp?bEOSLAgree=yes&action=next&sOSName=&re gion=3&MainCategory=266&Product_Name=Li've%2+5%2E+ Digital&Product_ID=853&modelnumber=
Message Edited by Rad-Wulf on 07-27-200709:28 PM

Vista driver for deskjet f2180 on Windows 8.1

I have a new Windows 8.1 desktop (64 bit), a Vista laptop (32 bit), and an HP F2180 printer/scanner. F2180 is connected to desktop via USB, is shared, and works fine from W81. I can't get it connected to the Vista laptop.
On the desktop, when I check the box "x86 Type 3 - User Mode", I am told to find the driver. Any idea what the file name and location are?
TIA.

Hello there TIA, Welcome to the Forums! I hope you enjoy your experience
I noticed your post about your Deskjet F2180 not functioning on your Windows Vista system. I would recommend (from the Vista laptop), running the full driver installation. This should install the driver properly on your laptop.
Here is the link to the driver: HP Deskjet F2100 and F4100 Full Feature Software and Driver
I hope my post was informational!
Have a great day and thanks for posting
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

64 Bit Vista Driver for PCI Simple Communications Controller

I installed vista 64 and have everything working well, I think. Only problem is this driver. I assume it is the modem. But I cannot find a 64 bit driver and doing the search online doesn't work. Any ideas?
BTW it is a k100 57061330 machine
Message Edited by Kevin on 05-16-2008 08:12 AM
Kevin
New Lenovo user.

I upgraded to 64 bit and have three driver-less devices:
pci data acquisition and singal processing controller
pci simple communications controller
sm bus controller
other than that it's working quite well.
Lenovo 3000 K100, Core2Quad 2.4GHz, 4GB, 1TB, 512M ATI, Vista 64Bit SP1, 5.2 Windows Exerience Index

Vista Driver for Live Motion

Similar Messages

Maybe you are looking for