Vista Drivers Needed for PC CAM

Hello everyone,I need some assistance. I can't get my PC CAM 550 working with VISTA 32 Bit'scould someone please assist. I need drivers for PC CAM 550. Thank you?

Toshiba does not support anything but windows XP pro and Vista 32bit OS's. There are some severe problems with this model of laptop (the P100) in regards to drivers (even under the supported vista 32bit. They fixed the graphics stuttering problem with the 4.2 bios release).
You can try a driver from laptopdrivers2go or from some other site. As long as they state they support Nvidia Geforce GO 7900GS and not just Nvidia Geforce 7900GS they should work ok. Just keep an eye on your GPU temperature. If it gets too hot under your ESC key where the card is or you cannot feel any good airflow from the vents on that side try a different driver. And you don't need to worry that much about melting your card as your computer will turn off from overheating first. Just be careful and if that happens uninstall the drivers immediately and try a new set.
Other than that you would have to get a new laptop.
Hope it works for you.
Edited by: ADMIN

Similar Messages

Vista Drivers Needed for Creative DiVi CAM 525D

Anyone manage to get their DiVi CAM 525D works on Vista?! Please create the drivers for Vista. Thanks alot!

BanditoS wrote:
Oh I forget post my mail [email protected] (Now I'm sure it is cause of my eyes )Thank you beforhand
check your email, accept my invitation at ringo.. all pics there are from divicam 525d..

Win7 64bit Drivers needed for pavilion touch laptop

Hi
I have just bought a HP pavilion touchsmart 14-n056ea that came with windows 8. I am using it for work and they have given me a windows 7 pro 64bit OS to use instead as it works better with their systems. i have formatted the drive and installed the win7 OS now but the drivers online are only for windows 8. Can anyone please help me to source some windows 7 drivers. Below are the hardware id's for the ones that are popping up in yellow in the device manager.
ethernet controller
PCI\VEN_10EC&DEV_8136&SUBSYS_2161103C&REV_08
PCI\VEN_10EC&DEV_8136&SUBSYS_2161103C
PCI\VEN_10EC&DEV_8136&CC_020000
PCI\VEN_10EC&DEV_8136&CC_0200
network controller
PCI\VEN_10EC&DEV_8179&SUBSYS_197D103C&REV_01
PCI\VEN_10EC&DEV_8179&SUBSYS_197D103C
PCI\VEN_10EC&DEV_8179&CC_028000
PCI\VEN_10EC&DEV_8179&CC_0280
pci communications controller
PCI\VEN_8086&DEV_9C3A&SUBSYS_2161103C&REV_04
PCI\VEN_8086&DEV_9C3A&SUBSYS_2161103C
PCI\VEN_8086&DEV_9C3A&CC_078000
PCI\VEN_8086&DEV_9C3A&CC_0780
sm bus controller
PCI\VEN_8086&DEV_9C22&SUBSYS_2161103C&REV_04
PCI\VEN_8086&DEV_9C22&SUBSYS_2161103C
PCI\VEN_8086&DEV_9C22&CC_0C0500
PCI\VEN_8086&DEV_9C22&CC_0C05
usb controller
PCI\VEN_8086&DEV_9C31&SUBSYS_2161103C&REV_04
PCI\VEN_8086&DEV_9C31&SUBSYS_2161103C
PCI\VEN_8086&DEV_9C31&CC_0C0330
PCI\VEN_8086&DEV_9C31&CC_0C03
unkown
ACPI\HPQ6007
*HPQ6007
graphics controller
PCI\VEN_8086&DEV_0A16&SUBSYS_2161103C&REV_0B
PCI\VEN_8086&DEV_0A16&SUBSYS_2161103C
PCI\VEN_8086&DEV_0A16&CC_030000
PCI\VEN_8086&DEV_0A16&CC_0300
i need a driver for audio too but windows is using its own one which seems to be working but would prefer the correct one.
many thanks in advance guys.
This question was solved.
View Solution.

Hi:
You can use all of the W7 x64 drivers and software from this model, except the audio.
DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6521...
Audio: Install third and reboot. Accept the agreement, download and install the second driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
To save you time wondering what drivers you need for the ID's you posted, here they are...
sm bus controller. Install first and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&dlc=en&lc=en...
graphics controller: Install second and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128860-1&cc=us&dlc=en&lc=en...
ethernet controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&dlc=en&lc=en...
network controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128935-1&cc=us&dlc=en&lc=en...
pci communications controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127794-1&cc=us&dlc=en&lc=en...
usb controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&dlc=en&lc=en...
unknown:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&dlc=en&lc=en...

Urgent Help Needed for WVC210 camera setup :)

Please help! I am trying to set up a Cisco WVC210 surveilance camera at one of the stores owned by the company I work for. Its a small business and I am the closest they have to an I.T person !! I have plenty of experience with software but not much on networking so need some idiot proof guidance ! The "administrative guide" is not worth the paper it is printed on!!
The store has a fixed IP address of 212.9.##.### I connected the camera using ethernet cable. Set the camera up using the software for the camera, with static ip address of 192.168.0.23. Set the SSID of the camera to that of the router (a Netgear one). It worked fine. I went to unplug so I could have it wireless and NOTHING !! It did work one time (no idea what i did differently!) but it would not work over the internet which is what we need it to do! I need the whole thing password protected too!
Is there ANYONE who can help me please??? I am at the point of running away from my work and never returning !!!! :s
Thank you

Hi Jodie,
Thank you for posting. In order to make the camera connect wirelessly, first set up the wireless settings in the camera to match the router. I usually open the router configuration page and copy and paste the SSID and Security Passphrase to the camera to avoid error. The next step is to unplug the ethernet cable and power cord from the camera. Then plug only the power back in and the camera should connect wirelessly.
For remote access to the camera you will need to forward port 80 to the LAN IP address of the camera. (192.168.0.23) This is done in the router. If you need help with port forwarding, you can search the web or call Netgear for assistance.
If you continue to need assistance with the camera, the fastest and easiest way to get assistance is to call Cisco Small Business Support. www.cisco.com/go/sbsc
Please go to www.cisco.com and click on "Register" in the upper right to create a user ID. This will allow our engineers to create a case for you.

Drivers needed for windows os upgrade?

I'm updating my os from win98 to win2k.
do i need new drivers for pci-7344, pci-6110e and ni-5411 (for pci). Labview version, i believe is 5.1, hardware and software purchased in summer 2001.
Thanks,
Byron Golden
U of Houston
Allied Geophysical Labs

Hello.
There are updated versions of the drivers you would need for those boards available on the web, but your LabVIEW version is very old and thus will not be compatible with those driver versions.
Hopefully you have the CDs with your older driver versions on them. Many drivers are available on the web at:
http://www.ni.com/downloads/
You will need NI-Motion, NI-DAQ, and NI-FGEN for the 5411.
Regards,
Colin C.
Applications Engineering
Colin Christofferson
Community Web Marketing
Blog

Vista x64 drivers needed for Satellite U200

Hello,
has anyone installed Vista x64 on the satellite U200? I want to change now to 64 bit, will upgrade to 4 GB memory as well.
Has anyone experience with the drivers that work? For chipset, wireless and graphics there is no problem. For the fingerprint I have as well. But how is it with the Value Added Package? Is this compatible with x64 and the Flashcards as well? Someone tried to install??
Thanks for answers!
snipe

Hello again! I changed to Vista x64 now - and what shall I say!!! WOW! It is two times faster then the old x86! Cannot believe it!
And I got nearly everything working, except the toshiba value added package - so I do not have the flashcards and the wireless changer - but I can wait - hope they fix this. Everything else works:
-fingerprint
-graphicscard
-wireless
-lan
-logitech mouse
-bluetooth (even switched to windows stack now for compatiblity reasons with logitech and nokia suite)
-toshiba assist works
-touchpad works, with scroll and so on
yeah thats it so far - and I am happy - did not expect so much! Try it yourself!
Greetz
snipe

Drivers needed for a mat**bleep**a dvd ram uj-842

I tried searching on Lenovo's site for this drive but I cannot find the drivers I need this this drive. Please let me know how I can get a link to these drivers.

Sorry, I couldn't resist laughing at the overzealous word filters.
However, it shouldn't need drivers at all - if you're using XP or Vista, it should be plug-and-play. Are you looking for a firmware update or CD/DVD recording software?

Drivers needed for hp pavilion 23-b012 windows 7 home 32 bit

Hello Im running into a problem where i cant find no access to the internet in my device manager i have yellow marks on the following devices and need drivers for
1. Ethernet Controller
2. Network Controller
3. PCI Device
4. PCI Simple Communications Controller
5. SM Bus Controller
6. Some Unknown Device
7. USB Mass Storage Device (Although it is reading the Flash Drive)
This question was solved.
View Solution.

Hi:
First install the amd chipset drivers and reboot. You want the first file listed on the webpage.
That will install the smbus and usb 3 controllers.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2032
Next install the graphics driver and reboot.
http://support.amd.com/en-us/download/desktop?os=Windows%207%20-%2032#amd-catalyst-packages
Next, install the audio driver and reboot. Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Ethernet controller: Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy...
Network controller:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&s...
PCI Device: Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
I would need you to post the hardware ID's for the rest of the devices (unknown & PCI Simple Comms) in order to try and find drivers for them.
To find a hardware ID for a device, please do the following...
Go to the device manager, find the Other Devices category, and click on the Device needing drivers.
Then click on the Details tab at the top of the device window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that and select the second item on the list (Hardware ID's).
Post the top string of characters that you see in the window.

64-bit drivers needed for 7900

I just purchased and installed a MSI NX7900GTX-T2D512E video card. This is my first experience with MSI.
I put in the installation CD and was told that my operating system isn't supported. So, not only don't I have drivers but I don't get any of the bundled software either.
My operating system is Microsoft Windows XP Pro 64.
I've searched for drivers but haven't found any yet. I don't see ANY on the MSI site for 64-bit. Before I RMA this thing, can someone help me make it work?
Additional info:
ASUS A8N-SLI Deluxe motherboard
AMD Athlon 64x2 CPU (dual core)
(2) Kingston PC3200 1GB DIMM
WD-Raptor 10,000RPM 74GB HD connected as JBOD in SATA RAID controller as boot drive
I'm not finished building this thing and need to resolve this to either replace the video card wtih one that is compatible or make this one work so I can move on.
Thanks in advance!

Quote from: Richard on 11-May-06, 20:38:30
Loader,
Just to add to what DOK said, you always want to get the latest nVidia nForce as well as ForceWare Drivers for your Mobo and Vid Card.
Take Care,
Richard
Any pointers?
I have the new BIOS for the motherboard so it will work with the dual-core processor correctly. I also have the new nVidia drivers.
The directions say to go to the new 665 drivers before updating the BIOS. I can't figure out how to install those.
So I said the hell with it and tried to update the BIOS. There is no BIOS update tool on the ASUS CD as it describes in the manual and the FlashBIOS tool that allows you to do it from Windows doesn't seem to be available either (I suspect it's because I'm running the 64-bit version.
So, I'm stuck.
I'm not a rookie at this, but I's starting to feel like one!

Need for new Camera?

I currently have a Sony Digital Handycam (DCR-TRV140) that i like, and has worked well for what i've wanted (home movies, etc). However, the camera is 6 years old and i'm wondering how outdated the technology is and if i should get a new camera? We're expecting more video opportunities and wonder if we should upgrade our camera?
any help or recommendations is appreciated.

I vote for waiting (unless you have a pressing need).
Sooner or later, HD will take hold. Right now you have HDV whose future may be in question because of AVCHD. Now AVCHD on paper is superior, but HDV has had time to mature and tends to be easier to work with right now than AVCHD. This will change probably sooner rather than later. And, as time goes, the price of flash media that AVCHD records to will continue to fall; or rather the price remains the same but capacity increases! And another reason for holding off for now is that AVCHD requires a LOT of horsepower to play around with.
Mike

Drivers needed for Windows 7 for HP 810-230QE

I recently purchased HP Envy 810-230QE that came with Windows 8.1 OS but due to some incompatibility with some of the applications I had to downgrade to Windows 7. I don't have network adapter drivers that support my model for Windows 7. Please help in resolving this issue. Thank you in advance.

Paul,
I searched the wireless driver by using the hardware id and found the following driver in the link which fixed it. Now I could connect through wireless.
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_133353_1
The solution was given by you in one of the forums http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/Win7-64-bit-HP-Pavilion-15-P075SA-not...
Thanks alot, you made my day.
Regards.
Bharath

Windows 7 Drivers Needed for Deskjet 6540

Hello,
We use 2 Deskjet 6540's @ my office. I have the windows 7 RC, and cannot get it to load drivers for the printers. I download the vista driver, and it says This driver is not for windows 7.and does not give me a "so what" option.
any help would be appreciated.
Keith

As of today Sept 16, 2011 the printer drivers from windows 7 work. It still requires some effort.
1) let the printer install (if it is already and the following steps do not work remove the device and let it reinstall)
2) right click on the printer in "Devices and Printers"
3) select "Printer Properties"
4) go to the "Device Setting" tab in the top row in the middle
5) under "installable options" click after the duplexer options and select "installed" from the drop down menu
6) click "OK"
I take no responsibility it this does not work for you, it work for me on Window 7 SP1

Satellite L40-17O - Vista drivers needed

Please help me to find drivers for my laptop satellite L40-170. OS Windows Vista 32bit

Hi
The drivers can be found on the Toshiba European driver page.
The L40 is old and therefore the drivers are moved to Archive area.
<img src='http://img69.imageshack.us/img69/2339/capturewvb.png' border='0'/>

Satellite P20-221: Drivers needed for Windows 7

Hi,
i would like to have windows 7 on my P20-221 but i just need few drivers to do that.
In the first time, can i update my Bios ?
In a second time, where i can find some toshiba programs (like touch key) compatible with windows 7
And at last, i just have 4 drivers problems (controler IEEE 1394, modem pci, and 2 unknown peripherics).
Thank you if you could help me.

Hi
The P20 is an oldie and the Win 7 drivers are not released officially for this notebook.
I didnt find any on the Toshiba European driver page
So I assume you will need to search for such drivers at your own hand.
Tip: try to install Win 7 VAP (value added package) and Flash Card Support Utility which are released for newer notebook series like L500 or newer. Usually such tools are not notebook model related so maybe you could download and install this on this P20.
Furthermore I recommend checking this:
http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
This helps you to find drivers for some unknown devices.

Internal hardware drivers needed for HP 2000 Notebook.

Perhaps someone can help me pull a pawn shop "bargain" back from a life of exclusive Linux service. The previous owner had appearantly attempted to retrograde the notebook from Windows 8 to Windows 7 using a Win7 recovery disc and an image of another computer. So of course the entire system, recovery partition and all, were formatted away and replaced with an unauthorized and broken install of Windows. I'm OK running Ubuntu on if for now, but I will eventually want to install a fresh copy of Windows and can't find the internal hardware drivers for my HP 2000 Notebook (product number C2M42UA) anywhere on HP support website. Before wiping away the unauthorized Win7 install I looked at the device manager and remember Realtec HD audio and Intel HD video and have located those drivers elsewhere on the web, but can't be sure what else I'll need. I do seem to recall that with the bad install the ethernet adapter was without a driver, for example.
Where can I find a list of drivers for which to scavange the web? Looks to me as if a hard drive failure will leave any newer HP computer in worse shape since they replaced the recovery discs with a recovery partition on the hard drive it's meant to restore. Something I should keep in mind in future computer shopping.
This question was solved.
View Solution.

Windows 7 driver download page for your model:
http://support.hp.com/us-en/drivers/selfservice/HP-2000-2b00-Notebook-PC-series/5296210/model/530508...
Remember, when you buy a new laptop they do not give you recovery disks. That has been true for many years. However, there is a Recovery manager that will let you make those disks and if you do that and store them in a safe place you are always able to recover your system. Windows itself also now has very good backup tools including the ability to make a complete system image of the computer in its current state (not factory condition) so there is no real reason you cannot be fully protected against a hard drive crash.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Vista Drivers Needed for PC CAM

Similar Messages

Maybe you are looking for