Vista-Flash different type of issue

I've done the whole reinstall process of the latest verison
of flash on my new laptop which runs vista home premium. I've run
the install program as the admin, but the only way I can get flash
to work is if I open Explorer by using "run as administrator". Does
anyone know how I can fix this so that I can use flash w/otu having
to do the whole"run as admin"?

Hi,
Did you check your screen settings? Under 'System prefrences' > 'Screen', see if there is a check at the autmatical adjustment of your brightness. Are you able to adjust the brightness down or up, with the respectively brightness-buttons (F1 and F2)?

Similar Messages

Mini-DVI to DVI Adapter issues (2 different types, no info from Apple)

as you can see below, I have an iBook G4 1.2GHz
three weeks ago I got a Mini-DVI to Video Adapter
there were two different types in the Apple Store because there are two generations of Mini-DVI outputs, therefore some close inspection and it was easy to get the right part.
Now, three weeks later, all that stuff is off the shelf so it looks like they only have up the more recent size plug. Thus, I cannot find the slightly smaller Mini-DVI to DVI Adapter. (typical Apple, probably just wants me to spend more money on a new machine)
Anyone have a line on where to buy the older type of adapter?
be very careful out there. They are pimping the heck out of the newer generations. I'm looking for the older one.
(if not, I'll probably just stop buying Apple stuff. No need for the headache any more since they are no longer really different products. Just fashion)

I have both an iBook G4 and a MacBook, which use each of the adaptors you have described. I found the information on the Apple site by identifying the Model iBook I had, Dual USB, and looking at he detailed views of each model to identify the type of 'video output port'. I obtained a '2 input' VGA switch from Tiger Direct to be able to switch my monitor from iBook to MacBook.
Hope this helps!

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

Mac OSX: Flash CS3 Font Install Issues

Hi,
I have a Mac Powerbook G4 with OS X installed and Adobe CS3.
I've installed a font. The font works in Photoshop and Illustrator
but not in Flash CS3. Why? I've put the font in the Library/Fonts
folder and the User/Fonts folder and it still doesn't show up in
Flash. Apparently this is a problem for a number of people see
another forum here:
MAC
OSX: Flash CS3 Font Install Issues Forum
Please let me know what to do to fix this. I need to be able
to work with the font in all three applications Flash, Photoshop
and Illustrator.

Hi davidd61713525,
Sorry for not getting back to you sooner.
Unfortunately, it looks like something is wrong with the file system and the installer can't see the root drive to install to. A Google search returns numerous results affecting various products and the recurring theme is that something is wrong with the disk. There are many recommendations from various sources, but nothing definitive.
Here's a similar thread over on the Apple forums:
Broken Installer Permissions | Apple Support Communities
And a similar older one:
http://forums.macrumors.com/showthread.php?t=1203509
I would try the following options:
Try using the PKG installer. This is used Mac SysAdmins to install Flash Player within their organization and uses a slightly different installer path, which may or may not work.
Some people have had success with disk and permissions repair some have not. You can try running a disk and permissions repair. After the disk and permissions repair is complete, reboot the system and try to install again using either the online installer (get.adobe.com/flashplayer) or the offline installer, posted at the bottom of the Installation problems | Flash Player | Mac page in the ‘Still having problems’ section.
If these options do not work, I'd reach out to Apple support to see if they have a suggestion. If you do find a resolution to this, please let me know. I'll be happy to share it with people that encounter the problem in the future.
Maria

Flash Header/Navigation Reload Issue

I have been researching all day and there are many different solutions, none that are straight forward. I am currently in the process of making a website in Dreamweaver which has a flash header. Problem is the flash header reloads when you go to every page. Is there a simple (I'm a noob) way I can get the flash header to stay open at the top of the website, and the content of each page just change when you go to each page. Thus the flash header and nav buttons do not reload on every page. To review the pages so far; http://www.itrelocation.ca/MiniMe/index.html.
I thank you in advance. More detail concerning the fix is greatly appreciated.

I think frames is the only choice you're gonna have.
I don't know of anything else that allows you to keep one thing loaded while changing other content except Flash itself. So the only other solution I know of would be to create the site entirely in Flash... no issues reloading anything there once the site is loaded.
Wait, there is another approach you could consider, using DHTML. It is a browser dependent approach. If you look at the source code of this page it uses that approach. The content that changes is written into javascript variables in the head section. I made this quite a few years ago for a client, but I haven't heard any complaints about it failing yet...
http://www.h-and-m-analytical.com/services.htm

IE+Vista+Flash context menu lockout

Hi there experts,
I'm tinkering with the mic activity AS3 stuff (although this
is a general
flash question). This issue happens whether the .fla is
trying reading the
mic or not though. On IE+XP I can right click to get context
menu up, then
select allow mic access fine.
On IE+Vista the menu comes up, but all the tabs and buttons
are partially or
totally unresponsive! It's like the browser is blocking mouse
clicks or
something. I can't set mic to allow access, even though the
mic can be seen
to be read on the activity level meter on the context menu.
Has anyone else had this problem? I can't seem to google for
the exact issue
so far.
Many thanks
Richard Smith

I found out part of the problem myself in the end.
Wacom Tablet on Vista+IE. Clicks on browser fine. Clicks on
Flash stage
fine. Clicks on some Flash context menu buttons blocked.
Using a mouse on
the same system worked fine.
May be a Wacom driver issue? But still very odd behavior!
Thanks
Richard Smith

How select different type views in MM01

Hi abapers,
plz tell me how to handle diffrent different type views in MM01.
thanks in addvance

hi,
After the recording, you might see, that the selection of the views is
monething like that: SELECTION(3) = 'X'
SELECTION(4) = 'X'
SELECTION(5) = 'X'
you have to address the selected
views by their index in the table.
in Tcode SHDB, record MM01 transaction only for the MRP1 MRP2 MRP3 and use the same code in ur BDC prog.
Look at the below code for MM01
http://www.sap-img.com/abap/example-how-views-are-dealt-in-bdc.htm
You have + button in the MK01 trasaction code, if you press that you
can enter new record in the table control, so every time, enter a New
record and press that + button, then enter the record then press + , like this we need to handle the table control
Check the links -
bdc -- mm01
MM01 BDC
mm01
example:
Example how Views are dealt in BDC
Can any body tell me some views of MM that we can use in BDC?
***This is a BDC for Semi finished Materials*******
report ZBDC_SEMIFIN
       no standard page heading line-size 255.
include bdcrecx1.
Tables: Mara,"General Material Data
        mard,"Storage Location Data for Material
        mvke,"Sales Data for Material
        Makt,"Material Descriptions
        marc,"Plant Data for Material
        mbew,"Material Valuation
        rlgrap."Program Fields/Screen Fields for SAPLGRAP
Data: begin of ITAB occurs 0,"Internal table for Semi-Finished Material
Initial data
      matnr like mara-matnr, "Material Code
      mbrsh like mara-mbrsh, "Industry Data
      mtart like mara-mtart, "Material Type
Org Data
      Werks like marc-werks, "Plant
      lgort like mard-lgort, "Storage Location
      vkorg like mvke-vkorg, "Sales Orgnization
      vtweg like mvke-vtweg, "Distribution Chanel
Basic 1
      Maktx Like makt-maktx, "Description
      meins like mara-meins, "Uom
      matkl like mara-matkl, "Material Group
      BISMT LIKE MARA-BISMT, " Old Material Number
      spart like mara-spart, "Division
      brgew(7),"like mara-brgew, "Gross Weight
      gewei like MARA-GEWEI, "Weight Unit
      ntgew(7)," like mara-ntgew, "Net Weight
Purchasing
       MAKTL LIKE MARA-MATKL, "Material Group
       ekwsl like MARA-EKWSL, " Purchasing Value Key
       ekgrp like MARC-EKGRP, " Purchasing Group
Mrp 1
      disgr like MARC-DISGR, "Mrp Group
    ekgrp like MARC-EKGRP, "Purchasing group
      dismm like MARC-DISMM, "Mrp Type
      dispo like MARC-DISPO, "Mrp Controller
      disls like MARC-DISLS, "Lot Size
      BSTMI like MARC-BSTMI,
      BSTMA like MARC-BSTMA,
      BSTRF like MARC-BSTRF,
      BSTFE like MARC-BSTFE,
Mrp 2
      beskz like MARC-BESKZ, "Procurement type
      lgpro like MARC-LGPRO, "Production Storage Location
      dzeit(3),"like MARC-DZEIT, "In house Production time
      plifz(3),"like MARC-PLIFZ, "Planned delivery time
      fhori(3),"like MARC-FHORI, "Sched margin key
      eisbe like MARC-EISBE, "Safety stock
Mrp 3
      PERKZ LIKE MARC-PERKZ,
      vrmod like MARC-VRMOD, "Consumption mode
      vint1(3)," like MARC-VINT1, "Backward Consumption period
      vint2(3),"like MARC-VINT2, "Forward Consumption period
      mtvfp like MARC-MTVFP, "Availability Check
Mrp 4
      sbdkz like MARC-SBDKZ, "Individual/ Collective
      SAUFT like MARC-SAUFT, "Repetitive Manufacturing
      SFEPR like MARC-SFEPR, "REM Profile
Work Scheduling View
      ausme like MARC-AUSME, "Unit of issue
      FEVOR LIKE MARC-FEVOR, "Production Scheduler
      SFCPF like MARC-SFCPF, "Production Scheduler Profile
      umren(5)," like RMMZU-UMREN, "Val for base uom
      umrez(5) ,"like RMMZU-UMREz, "Value for uo issue
Accounting 1
      bklas like MBEW-BKLAS, "Valuation Class
      vprsv like MBEW-VPRSV, "Price Control Indicator
      verpr(7)," like MBEW-VERPR, "Value/Price
      STPRS like MBEW-STPRS,
*COSTING
     EKALR LIKE MBEW-EKALR," With qty str
     LOSGR like MARC-LOSGR, " Costing Lot size
    end of ITAB.
Data: W_record type I, "Record Allready exists.
      w_trecord type I. "Total record processed
start-of-selection.
perform upload.        "Upload Data from Text File
Perform Open_group.    "Create a session
clear : w_record,w_trecord.
perform semi. "Create Semi Finish Materials
if w_trecord gt 0 or w_record gt 0.
perform batch_job.
endif.
perform close_group.   "Close session
FORM SEMI.
loop at ITAB.
Check for material in master        select single * from mara where matnr eq ITAB-matnr.
         if sy-subrc ne 0.
          w_trecord = w_trecord + 1.
*Initial Screen
perform bdc_dynpro      using 'SAPLMGMM' '0060'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-MTART'.
perform bdc_field       using 'BDC_OKCODE'
                              '=AUSW'.
perform bdc_field       using 'RMMG1-MATNR'
                              ITAB-MATNR.
perform bdc_field       using 'RMMG1-MBRSH'
                              'M'.
perform bdc_field       using 'RMMG1-MTART'
                              'HALB'.
**********************Views*********************************
*Select Views
perform bdc_dynpro      using 'SAPLMGMM' '0070'.
perform bdc_field       using 'BDC_CURSOR'
                              'MSICHTAUSW-DYTXT(17'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(01)'
                               'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(09)'
                              'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(12)'
                              'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(13)'
                              'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(14)'
                              'X'.
perform bdc_field       using 'MSICHTAUSW-KZSEL(15)'
                              'X'..
perform bdc_field       using 'MSICHTAUSW-KZSEL(17)'
                              'X'.
**********************Views*****************************
*perform bdc_dynpro      using 'SAPLMGMM' '0070'.
*perform bdc_field       using 'BDC_CURSOR'
                             'MSICHTAUSW-DYTXT(01)'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_dynpro      using 'SAPLMGMM' '0070'.
*perform bdc_field       using 'BDC_CURSOR'
                             'MSICHTAUSW-DYTXT(17)'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_field       using 'MSICHTAUSW-KZSEL(17)'
                             ITAB-KZSEL_17_011.
*perform bdc_dynpro      using 'SAPLMGMM' '0070'.
*perform bdc_field       using 'BDC_CURSOR'
                             'MSICHTAUSW-DYTXT(01)'.
*perform bdc_field       using 'BDC_OKCODE'
                             '/00'.
*perform bdc_dynpro      using 'SAPLMGMM' '0070'.
*perform bdc_field       using 'BDC_CURSOR'
                             'MSICHTAUSW-DYTXT(13)'.
*perform bdc_field       using 'BDC_OKCODE'
                             '=ENTR'.
*perform bdc_field       using 'MSICHTAUSW-KZSEL(13)'
                             ITAB-KZSEL_13_012.
*Org Data
perform bdc_dynpro      using 'SAPLMGMM' '0080'.
perform bdc_field       using 'BDC_CURSOR'
                              'RMMG1-LGORT'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_field       using 'RMMG1-WERKS'
                              ITAB-WERKS.
perform bdc_field       using 'RMMG1-LGORT'
                              ITAB-LGORT.
*Basic 1
perform bdc_dynpro      using 'SAPLMGMM' '4004'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP09'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARA-MEINS'
                              ITAB-MEINS.
perform bdc_field       using 'MARA-MATKL'
                              ITAB-MATKL.
perform bdc_field       using 'MARA-BISMT'
                              ITAB-BISMT.
perform bdc_field       using 'MARA-SPART'
                              ITAB-SPART.
perform bdc_field       using 'MARA-MTPOS_MARA'
                              'NORM'.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-NTGEW'.
perform bdc_field       using 'MARA-BRGEW'
                              ITAB-BRGEW.
perform bdc_field       using 'MARA-GEWEI'
                              ITAB-GEWEI.
perform bdc_field       using 'MARA-NTGEW'
                              ITAB-NTGEW.
*Purchasing
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP12'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARA-MEINS'
                              ITAB-MEINS.
perform bdc_field       using 'MARC-EKGRP'
                              ITAB-EKGRP.
perform bdc_field       using 'MARA-MATKL'
                              ITAB-MATKL.
perform bdc_field       using 'BDC_CURSOR'
                              'MARA-EKWSL'.
perform bdc_field       using 'MARA-EKWSL'
                              ITAB-EKWSL.
*MRP 1
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP13'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARA-MEINS'
                              ITAB-MEINS.
perform bdc_field       using 'MARC-EKGRP'
                              ITAB-EKGRP.
perform bdc_field       using 'MARC-DISMM'
                              ITAB-DISMM.
perform bdc_field       using 'MARC-DISPO'
                              ITAB-DISPO.
perform bdc_field       using 'BDC_CURSOR'
                              'MARC-DISLS'.
perform bdc_field       using 'MARC-DISLS'
                              ITAB-DISLS.
IF ITAB-DISLS EQ 'EX'   .
perform bdc_field       using 'MARC-BSTMI'
                              ITAB-BSTMI."MIN LOT SIZE
perform bdc_field       using 'MARC-BSTMA'
                              ITAB-BSTMA."MAX LOT SIZE
perform bdc_field       using 'MARC-BSTRF'
                              ITAB-BSTRF."RNDING
ELSEIF ITAB-DISLS EQ 'FX'.
perform bdc_field       using 'MARC-BSTFE'
                              ITAB-BSTFE.
ENDIF.
*MRP 2
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP14'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARC-BESKZ'
                              ITAB-BESKZ.
perform bdc_field       using 'MARC-LGPRO'
                              ITAB-LGPRO.
perform bdc_field       using 'MARC-DZEIT'
                              ITAB-DZEIT.
perform bdc_field       using 'MARC-PLIFZ'
                              ITAB-PLIFZ.
perform bdc_field       using 'MARC-FHORI'
                              ITAB-FHORI.
perform bdc_field       using 'BDC_CURSOR'
                              'MARC-EISBE'.
perform bdc_field       using 'MARC-EISBE'
                              ITAB-EISBE.
*MRP 3
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP15'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARC-PERKZ'
                              ITAB-PERKZ.
perform bdc_field       using 'MARC-VRMOD'
                              ITAB-VRMOD.
perform bdc_field       using 'MARC-VINT1'
                              ITAB-VINT1.
perform bdc_field       using 'MARC-VINT2'
                              ITAB-VINT2.
perform bdc_field       using 'BDC_CURSOR'
                              'MARC-MTVFP'.
perform bdc_field       using 'MARC-MTVFP'
                              ITAB-MTVFP.
*MRP 4
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP17'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARC-SBDKZ'
                              ITAB-SBDKZ.
perform bdc_field       using 'BDC_CURSOR'
                              'MARC-SFEPR'.
perform bdc_field       using 'MARC-SAUFT'
                              ITAB-SAUFT.
perform bdc_field       using 'MARC-SFEPR'
                              ITAB-SFEPR.
*Work Scheduling
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP24'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'BDC_CURSOR'
                              'MARC-SFCPF'.
perform bdc_field       using 'MARA-MEINS'
                              ITAB-MEINS.
perform bdc_field       using 'MARC-FEVOR'
                              ITAB-FEVOR.
perform bdc_field       using 'MARC-LGPRO'
                              ITAB-LGPRO.
perform bdc_field       using 'MARC-SFCPF'
                              ITAB-SFCPF.
perform bdc_field       using 'MARC-DZEIT'
                              ITAB-DZEIT.
*Check for Conversation Factor
          if ITAB-MEINS ne iTAB-ausme and iTAB-umren gt 0
                                      and iTAB-umrez gt 0.
          perform bdc_dynpro      using 'SAPLMGMM' '0510'.
          perform bdc_field       using:
                                  'BDC_OKCODE'    '=ENTR',
                                  'RMMZU-UMREN'   ITAB-UMREN,
                                  'RMMZU-UMREZ'   ITAB-UMREZ.
        endif.
perform bdc_field       using 'MARC-LGPRO'
                              itab-LGPRO.
perform bdc_field       using 'MARC-DZEIT'
                              itab-DZEIT.
*Accounting
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SP26'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'MARA-MEINS'
                              ITAB-MEINS.
perform bdc_field       using 'MARA-SPART'
                              ITAB-SPART.
perform bdc_field       using 'BDC_CURSOR'
                              'MBEW-STPRS'.
perform bdc_field       using 'MBEW-BKLAS'
                              ITAB-BKLAS.
perform bdc_field       using 'MBEW-VPRSV'
                              ITAB-VPRSV.
perform bdc_field       using 'MBEW-STPRS'
                              ITAB-STPRS.
IF ITAB-VPRSV = 'S'.
perform bdc_field       using 'MBEW-STPRS' "FILLS STD PRICE
                              ITAB-VERPR.
ELSEIF ITAB-VPRSV ='V'.
perform bdc_field       using 'MBEW-VERPR' "FILLS VALUE
                              ITAB-VERPR.
ENDIF.
*Cost Estimate
perform bdc_dynpro      using 'SAPLMGMM' '4000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
perform bdc_field       using 'MAKT-MAKTX'
                              ITAB-MAKTX.
perform bdc_field       using 'BDC_CURSOR'
                              'MARC-PRCTR'.
perform bdc_field       using 'MARA-MEINS'
                              ITAB-MEINS.
perform bdc_field       using 'MBEW-EKALR'
                              ITAB-EKALR.
perform bdc_field       using 'MARC-LOSGR'
                              ITAB-LOSGR.
perform bdc_transaction using 'MM01'.
REFRESH BDCDATA.
    else.
         w_record = w_record + 1.
    endif.
ENDLOOP.
ENDFORM.
form Upload.
CALL FUNCTION 'UPLOAD'
EXPORTING
   CODEPAGE                      = ' '
   FILENAME                      = ' '
   FILETYPE                      = ' '
TABLES
    DATA_TAB                      = ITAB
EXCEPTIONS
   CONVERSION_ERROR              = 1
   INVALID_TABLE_WIDTH           = 2
   INVALID_TYPE                  = 3
   NO_BATCH                      = 4
   UNKNOWN_ERROR                 = 5
   GUI_REFUSE_FILETRANSFER       = 6
   OTHERS                        = 7.
ENDFORM.
form batch_job.
    uline.
      format color col_heading.
        if w_trecord gt 0.
        Write:/ 'Background Job has been Created for ',
              w_trecord right-justified, 'Semi-Fin', 80 ''.
        write:/ 'Please follow the following steps to run this job',
                                                           80 ''.
        write:/ 'as listed below.', 80 ''.
        format color col_normal.
        skip.
        write:/05 '1.Goto Transaction SM35', 80 ''.
        write:/05 '2.Select your Session Name', 80 ''.
        write:/05 '3.Click On Execute Button', 80 ''.
       endif.
       if w_record gt 0.
         format color col_negative.
         write:/ w_record ,'records already existed', 80 ''.
         format color off.
       endif.
    uline.
endform.

IPad mini goes ballistic flashing different windows and site randomly

iPad mini goes ballistic flashing different windows and site randomly

Hi there,
iPad mini retina 32 GB 4G version
These are my tries, all of them(three times) failed with ghosting and other issues...
Production detail check:
http://www.chipmunk.nl/klantenservice/applemodel.html
DLXLP.........
Nice Name: iPad mini Retina (2nd Gen - Cellular)
Machine Model: iPad4,5
Family name: A1490
Model Number: ME824
Group1: iPadMini
Group2: WiFi-Cellular
Generation: 2
CPU speed: 1.3GHz
Screen size: 7.9 inch
Screen resolution: 2046x1536 pixels
Colour: Silver
Production year: 2013
Production week: 46 (November)
Model introduced: 2013
Capacity: 32GB
Memory - flavour: xx
Factory: DL (China - Foxconn)
DLXLP.........
Nice Name: iPad mini Retina (2nd Gen - Cellular)
Machine Model: iPad4,5
Family name: A1490
Model Number: ME824
Group1: iPadMini
Group2: WiFi-Cellular
Generation: 2
CPU speed: 1.3GHz
Screen size: 7.9 inch
Screen resolution: 2046x1536 pixels
Colour: Silver
Production year: 2013
Production week: 46 (November)
Model introduced: 2013
Capacity: 32GB
Memory - flavour: xx
Factory: DL (China - Foxconn)
F4KLR.........
Nice Name: iPad mini Retina (2nd Gen - Cellular)
Machine Model: iPad4,5
Family name: A1490
Model Number: ME824
Group1: iPadMini
Group2: WiFi-Cellular
Generation: 2
CPU speed: 1.3GHz
Screen size: 7.9 inch
Screen resolution: 2046x1536 pixels
Colour: Silver
Production year: 2013
Production week: 48 (December)
Model introduced: 2013
Capacity: 32GB
Memory - flavour: xx
Factory: F4 (China, Shanghai - Pegatron-Protek)

Convert different types of files and merged them into one pdf

Hi, everyone. I'm girl from China.
There is folder containing severl files of different types, like doc, msg, jpeg etc. And I want to convert and merge them into one pdf following a certain order. I know that PDFmaker can do that nicely, but the problem is that I have like 3000+ fodlders that requires the same work.
I want to do it with VBA and Acrobat. I have a Acrobat XI Standard Version and a perfect license, by the way
And I have got the code(Thanks, Karl Heinz Kremer) of merging two pdfs into one, but how can I convert them into pdf first?
Thank you very much.
If I can finish this, I would like to publish my code on this forum.

Wow, that's great news. But how should I add the Action?
1. There is no action named "Covert files into Pdf" in the tools panel....
And if I write Javascript code to do this action. How should I write it?
app.openDoc({
cPath: "/c/temp/myPic.jpg",
bUseConv: true
These code only works when I specify the path of the file.
If you know how, pls tell me..........

How can I get the program to recognize two different types of thermocouples?

I am using a PCI-4351 card with a TBX-68T terminal block. I was having trouble writing and finding a program that would give me more than one reading/sec. I found a program on the NI website called "435x_logger_triggering", and so far it is the only program that I have found that will actually collect data at 60 Hz. Unfortunately, this program only lets you specify one mode for your thermocouples. This is a problem because we are using two thermocouples, one is type K and the other is a type R, so we get bad readings from one of the thermocouples depending on which mode it is set on. I would like to know how I can program in a seperate mode for each channel in this program. Un
fortunately, some of the sub VI's in this program are password protected, so I don't know if this is possible. Everything is entered correctly in the Measurement and Automation explorer, so that isn't the problem. I will attach a copy of the program that I am using. I have modified it slightly from the one I got off the NI website, so that the thermocouple readings have a time stamp and are saved to disk. Any assistance you could give me would be greatly appreciated.
Thanks,
Jordan
Attachments:
Forest_Fire_Thermocouple.vi ‏140 KB
435xlogger_triggering.vi ‏110 KB

Jordan,
You should be able to sample two different thermocouples in the example that ships with the 435x driver called "Getting Started with multiple tranducers Continous". Simply put each type of thermocouple in a different index . Each index of the Transducer Group Array can have a different type and specify the channels that correspond to that type.
One way that you can speed this VI up is to place a wait inside of the while loop. This will reduce the number of times the software polls the card if it has available data(increasing the overhead). I would suggest about 500 ms. The data that you receive will all have the same delta t because the sampling clock is hardware driven not software, so it does matter when the data is polled.
You will not be
able to get 60 samples per second when you are measuring multiple channels anyway. The sample rate for multiple channels is about 9/(# channels). This is explained in the 435x Users Manual.
I looked at your code and noticed that you tried to change some of the enumeration controls. Unfortunately you will not be able to change these because they are password protected on the low level subVIs, which is where they are defined.
The way you select if you want the notch filter is in the 435x Config you specify fast or slow. If it is slow then it will select 10Hz as the nitch filter. If you select fast the it will select either 50 or 60Hz You would then use the function "435x Set power line frequency"
Good luck,
Mike

What are the different types of analytic techniques possible in SAP HANA with the examples?

Hello Gurus,
Please provide the information on what are the different types of Analytic techniques possible in SAP HANA with examples.
I would want to know in category of Predictive analysis ,Advance statistical analysis ,segmentation analysis ,data reduction techniques and forecast techniques
Which Analytic techniques are possible in SAP HANA?
Thanks and Regards
Sushma C Narasimhamurthy

Hi Sushma,
You can download the user guide here:
http://www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CFcQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2FSBOpa10%2Fen%2Fpa_user_en.pdf&ei=NMgHUOOtIcSziQfqupyeBA&usg=AFQjCNG10eovyZvNOJneT-l6J7fk0KMQ1Q&sig2=l56CSxtyr_heE1WlhfTdZQ
It has a list of the algorithms, which are pretty disappointing, I must say. No Random Forests? No ensembling methods? Given that it's using R algorithms, I must say this is a missed opportunity to beat products like SPSS and SAS at their own game. If SAP were to include this functionality, they would be the only BI vendor capable of having a serious predictive tool integrated with the rest of the platform.... but this looks pretty weak.
I can only hope a later release will remedy this - or maybe the SDK will allow me to create what I need.
As things stand, I could built a random forest using this tool, but I would have to use a lot of hardcoded SQL to make it happen. And if I wanted to go down that road, I could use the algorithms that come with the Microsoft/Oracle software.
Please let me be wrong........

What are the different types of bind that we can use to configure COREid?

Hi
What are the different types of LDAP bind that we can use to configure COREid?
Thanks for your input.

(http://download-west.oracle.com/docs/cd/B28196_01/idmanage.1014/b25343/idconfig.htm#BABGAECB)
7.5.2 Creating an LDAP Directory Server Profile

What are the different types of Wage types for Indian Payroll...??

Dear Frnds,
What are the different types of Wage types for Indian Payroll that we have to configure it...?? and please list wage types that we have to configure it for different types of TAX and Allowances in India payroll.
And also please list Info types numbers for different types of TAX and Allowances.
Many thanks in advance.
Regards
Ahmed.

for the list of the wage types you can check V_512W_D for country grouping 40 Inida
for Tax related info please search the forum or search google you will get lot of inputs

What are the different types of exits available?

hi all,
Can any explain different types of exits ? user exit ? menu exit etc?
can anyone explain me each exit with an real time scenario
regds
hari

Types of Exits 
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits 
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits 
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
 CASE okcode.
 WHEN 'BACK OR EXIT'.
 CASE sy-dynnr.
 WHEN '100'.
 SET SCREEN 0.
 LEAVE SCREEN.
 WHEN '200'.
Note that you can write any code that satisfy your needs. ****
But in this case, this was wrote as a sample code for reference sake. ****
And you can test it. ****
 SET SCREEN 100.
 LEAVE SCREEN.
 ENDCASE.
 ENDCASE.
Regards,
Pavan

Vista-Flash different type of issue

Similar Messages

Maybe you are looking for