Vista, IE7 and Virtual Office (VO) or Remote Manager

A Windows Vista laptop (Vista Business Edition) is trying to browse to the Virtual Office web page published by their Novell SBS 6.5 server using IE7. Nothing appears in the browser. If I look at the source for the page, there is a bit of code showing, referencing a Java script. I get the same result when I try to use the Netware Remote Manager web page at http://servername:8008 or https://servername:8009. It is the same if I use the server's IP address instead of a resolvable name. The browser windows says "Connecting" and the status line shows "Waiting for 10.170.170.5"
I loaded up Firefox, and after allowing a Certificate Exception, I am able to browse to the server's Virtual Office page from the same computer.
I have installed the Certificate from the server into the Trusted Publishers container, I have set both the http://servername and https://servername into the trusted sites list.
What else do I need to do in Vista to get the web page to work?

The answer is to turn off TLS 1.0 in the Advanced Internet Options
page.
Warren
On Wed, 06 May 2009 01:56:01 GMT, WFRUSH
<[email protected]> wrote:
>
>A Windows Vista laptop (Vista Business Edition) is trying to browse to
>the Virtual Office web page published by their Novell SBS 6.5 server
>using IE7. Nothing appears in the browser. If I look at the source for
>the page, there is a bit of code showing, referencing a Java script. I
>get the same result when I try to use the Netware Remote Manager web
>page at http://servername:8008 or https://servername:8009. It is the
>same if I use the server's IP address instead of a resolvable name. The
>browser windows says "Connecting" and the status line shows "Waiting for
>10.170.170.5"
>
>I loaded up Firefox, and after allowing a Certificate Exception, I am
>able to browse to the server's Virtual Office page from the same
>computer.
>
>I have installed the Certificate from the server into the Trusted
>Publishers container, I have set both the http://servername and
>https://servername into the trusted sites list.
>
>What else do I need to do in Vista to get the web page to work?

Similar Messages

T61 Windows Vista Ultimate and MS Office 2007

I have installed the above and MS Office is closing often with error message suggesting to use diagnosis. How to fix this problem.

I would use the repair feature in the "Add or Remove Programs" utility in the control panel.
I would also make sure that you upgrade your version to MS Office 2007, with service pack 1, as this critical update resolves many of these issues.
Message Edited by LukeD on 09-02-2008 10:45 PM
MacBook Pro, with an aluminum unibody enclosure **As of September 15, 2008, our company has completely switched to Apple. Having used ThinkPad products for over 10 years, we had desperately tried to find just one reason to continue using these products, to no avail. We are of the view that ThinkPads are no longer premium products. We wish you the best of luck with your ThinkPad! Happy computing…**

IE7 and EMOD

I'm running IE7 and Vista and can't get Step 2 in the Email Marketing OnDemand function to work. It gives me the error message "The editor was not able to create the DHTML Editor. please run the client installation or contact you system administrator." I was just trying to access an email we had setup the day before on a Win2000 IE6 pc, it ran all the installers but fails to open. Has anyone else had this problem or does anyone have Vista/IE7 and EMOD working?

In case anyone is interested, I managed to get the control to work with IE7 and Vista to some extent by downloading and installing the same Ektron eWeb ActiveX from another site (as a manual install, not as an ActiveX download). Now I can edit the email without issues in HTML. I occasionally get dumped out of the editor when I save, but to date have not had any occasion when the save did not complete (so the editor crashes but upon reconnect, the HTML has been saved successfully).

Sharing - Remote Management - Allow Access = Broken

After upgrading to Mountain Lion, I was unable to connect to my new Mountain Lion remote desktops.
The upshot is that the Sharing -> Remote Management -> Allow Access settings are not AD/LDAP aware and it only works with local users now.
I had to turn off Remote Management and use Screen Sharing, where Allow Access is fully aware of local and non-local accounts.
Remote Managment -> Allow Access:
Screen Sharing -> Allow Access:
Your other option is to "Allow All Users" but I didn't want to do that.

I use the Vine Server for reduced color support. In my case it is my Mom's iMac 300 miles away and she has a slow DSL connection.
My experience with Mac OS X VNC server and client are that they work together very well, however, they do not play as nice with 3rd party clients and servers.
Since you are using Windows and by definition a 3rd party client RealVNC, I would suggest you install Vine Server. You can even configure it so it listens on port 5901 so it does not conflict with the Mac OS X VNC server.
<http://www.macupdate.com/info.php/id/11283/vine-server-%26-viewer>

Redundant Remote Manager configuration

Hi all,
I'm looking for a way to configure OIM to use multiple remote managers for the same IT Resource. So two identical remote managers on two different machine having the same scripts and configuration.
Can't seem to find the right configuration option.

You need to create a load balanced address for your remote manager and use that in your remote manager it resources.
-Kevin

I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2. Each time I try to save a Wo

I have an HP-Pavilion Vista PC with MS Office 2007 and Service Pack 2. Each time I try to save a Word or Excel document I get the “Not Responding” message. The “Word is saving……” bar at the bottom does not show any progress. On clicking the document I get a faded version even when in Safe Mode. Somehow the document appears on the Desktop where I tried to save it. On trying to open the saved document, even as administrator, I get the following ”File in Use” message:
“The ….docx is locked for editing by….” and I am asked three questions including:
“Do you want to open a Read Only copy” yet on clicking “Yes” I am able to edit the same document.
On trying to save to a different location I get the message:
“Your autocorrect file MSO 1033.ad could not be saved. The file may be read only or you may not have permission to modify this file.”
The same message stating FILE12\1033\MSO.ACL MSO 1033ad recurs with new Excel documents.
How can I correct this problem?
PS
Worse still, the HP Advisor icon that appears on startup does not load successfully while showing the message: “Access to the path Hewlett-Packard\HD Advisor is denied”.
What can I do about it?
ZDK

I'm having the same issue, allowing guest access on the share did change the logs I'm getting in Samba. Earlier on it was giving errors on the inability of guest access to the share.
============================================================
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(37)
INTERNAL ERROR: Signal 11 in pid 4204 (3.0.10)
Please read the appendix Bugs of the Samba HOWTO collection
[2008/01/29 13:05:47, 0] /SourceCache/samba/samba-100.5/samba/source/lib/fault.c:fault_report(39)
============================================================
I also noticed that the temporary file that is created by office is not removed after the attempt to safe the file. (something like: ~$filename).

App-V 5.0: Adding Visio 2013 and Project 2013 to a previously deployed virtual Office 2013

Good morning.
I can successfully deploy Office 2013 via PowerShell and App-V v5.0 without difficulty. I've read the document at
http://support.microsoft.com/kb/2915745/en-us and followed all instructions successfully.
My question is this: If Office 2013 without Visio 2013 or Project 2013 is virtually deployed, how can those components be added later?
For instance, we may have 100 users that acquire a virtualized Office 2013 without Project or Visio. We then may have 25 users that require a virtualized Office and Visio without Project and, perhaps, another 15 that require Office and Project without
Visio.
Currently, when I attempt a second virtual deployment of one of these components, it removes Office 2013 making it inaccessible.
How can Project and/or Visio be deployed to an already existing virtually deployed Office 2013?
Thanks very much.
John
IAmStrings

As a part of MDOP, you'll also have access to UE-V which will provide a mechanism of moving user preferences across the same applications from difference packages.
It will require planning, configuration and deployment, but will ensure you don't face the same issue in the future.
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Clustering Virtual Office and Netstorage Services in a DMZ

Gudday Guys,
We are relative novices with implementing Virtual Office and Netstorage
but we currently have it set up to front end our student storage system.
As the system will support 40,000 students, we are looking to move from a
single server implementation to a cluster with it running on at least two
servers to share the load. In addition, in order for students to access
their files from home, we intend deploying the cluster into the DMZ and
using SSL to connect from outside.
Before we set this up, I have a few questions. Firstly, can we set the
cluster up in its own tree so that its replication etc can be confined in
the DMZ or are we forced to set it up in our existing tree which is where
the users and storage reside? We could then pass the authentication
traffic through the conduits to our replica servers. If we can do this,
are there any special tricks/tips?
Any help or suggestions would be greatly appreciated. Thanks. Bill G.

> We don't allow http access directly from the outside - PERIOD! That's a
> Policy.
no problaem, that's fine.
> We use iChain to front end some of our existing Webapps but we decided to
> do this slightly differently this time and host the webapp itself in the
> DMZ and the services behind the firewall. That way we can easily access it
> both from within and outside the district.
well.......
> I've opened conduits for Authentication to the other tree (Port 524 tcp
> and udp) and also SLP (Port 427 TCP and UDP). I'm having trouble getting
> access to the DAs in the other tree. Any Thoughts?
you need to open up more ports. The client uses a "high" port as the source
port and 427 as the destination port when talking SLP. The DA will respond
to the client's source port. The source port from the server will be 427 but
the destination port will not be. You will need to open ports from the
client to allow high ports. 1024 to <whatever> is the normal range.
<whatever> supposedly never goes over 1500 or so.
NETSTAT -A will show you what its using.
Cheers!
Richard Beels
~ Network Consultant
~ Sysop, Novell Support Connection
~ MCNE, CNE*, CNA*, CNS*, N*LS

Virtual Office NetStorage broke after Security 205 and iManager 2.6sp4

Hello all,
This past weekend I put Security 205 update and iManager 2.6 sp4 on my Virtual Office server. Yes, I know they are running together.
Facts OES Netware 6.5 sp6., Universal Password, Secure Login/Secret Store
While in Virtual Office, if a user tries to go into their NetStorage location, they are prompted to "Please Enter Username and Password for Files" No matter what they do, they can not get to their files. However, if they go through Network Places and setup their NetStorage account, is works just fine and they can get to their files.
Any ideas?
Sincerely, Tom

THafemann,
It appears that in the past few days you have not received a response to your posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com/ to search the knowledgebase and check the other support options available on that page under "Self Support" and "Support Programs".
- You could also try posting your message again. Make sure it is posted in the correct newsgroup. (http://support.novell.com/forums)
If this is a reply to a duplicate posting, please ignore and accept our apologies and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Virtual office and outlook

Is there any way integration between Virtual Office Calendar/Contacts and
outlook is possible?
Thanks

Noel,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

ACCESS REMOTE AND VIRTUAL CUBES

Hi all,
I installed standard cube:
0FIGL_C10       General Ledger (New): Transaction Figures
and it came with the following ones:
0FIGL_R10       General Ledger (New): Transaction Figures, Remote
0FIGL_V10     General Ledger (New): Financial Statement
0FIGL_V11     General Ledger (New): Financial Statement, Remote
How do i link these remote and virtual cubes to 0FIGL_C10 and how do i populate these cubes to execute query's from them?
Thanks

Hi SAPPER BI,
Check this links:
Sap Help: http://help.sap.com/saphelp_nw70/helpdata/en/e2/f16940c3c7bf49e10000000a1550b0/frameset.htm
Best Practices: http://help.sap.com/bp_biv270/BBLibrary/HTML/B70_EN_DE.htm
Only 0FIGL_V10 is connected to that cube, and it uses a function module. You won't see a transformation between them. You should activate them from BCT, then load and information will get populated to your reports on the virtual and remote cubes.
Hope this helps.
Regards,
Diego

Difference between General remote cube and virtual infoprovide with service

Hi guys,
I could not understand the difference between general remote cube and virtual infoprovider technically. And I could not find the document about how to set general remote cube.
I only find the following sources.
http://help.sap.com/saphelp_nw2004s/helpdata/en/23/c0234239f75733e10000000a155106/frameset.htm
"In comparison to other VirtualProviders, this VirtualProvider is more generic. It offers more flexibility, but also requires a higher implementation effort.".
I am welcome your lecture. Especially I would like to know how to set general remote cube..
Kind regards,
Masaaki

Hi,
You better take a look on the link:
http://help.sap.com/saphelp_nw04/helpdata/en/8d/2b4e3cb7f4d83ee10000000a114084/frameset.htm
Remote cube uses BAPI
SAP remote cube uses the BW Service API functions of SAP system
In Virtual cube with services, The data source is a user-defined function module.
with rgds,
Anil Kumar Sharma .P

File locking in Virtual Office

I'm using Virtual Office for Open Enterprise Server V 1.6.
If a user working locally on my network opens a file the file will automatically be locked to read only for all other users. This is as it should be.
If any other local users attempt to open the file they will recieve a standard warning message telling them that the file has been opened by somebody else, and who that person it.
If a user working remotely via Virtual Office attempts to open the same file while it is locked in read only mode they do not receive any error warnign messages. Instead they just recieve a 404 File Not Found error.
Is there any way to set up an automatic warning telling remote users with Virtual Office when a file that they are trying to access has is currently being edited by another user?

KnaufIT,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable

error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
success

Hi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support

Hot Synch with Windows XP and MS Office 2007

I can not synchronize my Palm Treo 680 Unlocked with Windows XP Home and MS Office 2007.
I see several comments regarding Outlook 2007. Is resolving the synchronization of Outlook 2007 the same solution as Office 2007?
If so what is the solution?
Post relates to: Treo 680 (Unlocked GSM)

I also cannot synch my Palm Treo 680 unlocked with Outlook 07 using Vista. It says "Hot Synch Operation Completed Successfully", but nothing did synch. I downloaded palmoutlook07conduits.zip and there was no change. I was synching wirelessly using Microsoft Exchange Active Synch without problems, but when I cancelled my 'data' package on my cell phone, it no longer was synching. I tried reloading my original Palm CD, but it doesn't allow me to select 'Outlook' as my connectivity. Please help. And please don't provide me with a bunch of acronyms as I won't understand them!!!!
Thanks,
Post relates to: Treo 680 (Unlocked GSM)

Vista, IE7 and Virtual Office (VO) or Remote Manager

Similar Messages

Maybe you are looking for