Vista, PC Suite and the Internet ... I AM an admin...
I have a laptop running Vist Home Basic (ugh!) and Nokia PC Suite 6.82.22.0. The laptop connects to a Nokia 5500 Sports phone and is being recognised OK. From that side of things all seems OK.
When I try to use the 'Connect to the Internet' function I get the message "you do not have sufficient priviledges to modify the connection properties. Only administrators can create and modify connections".
Clicking OK brings up One Touch Access which is saying, "There are no Nokia modems installed. Please make sure you have installed Nokia Connectivity Cable driver software."
So..., firstly, I AM an administrator (and I've tried starting the PC suite using 'Start as an administrator') so what's all that about?
Secondly, I believe the Nokia Connectivity Cable Driver IS installed - it's showing in the programs list, so what's all this about?
One thing that may have a bearing on the matter is that the phone does not currently have a SIM card in it (I'm still deciding which network is best to go with), but I did try it with a SIM card and it had the same effect.
Any ideas?
Hi
I'm running Nokia PC Suite 6.81.13.0 on Vista Ultimate.
I just successfully connected to the Internet via N95 over Bluetooth.
All I did was to Right Click the "Nokia PC Suite" in the start menu and select "Run as administrator". Then I configured my Modem and boom it connected the PC to the Internet via the N95. I was lucky that my Service Provider (3 in Denmark) was in the list, so no trial on error.
After this initial setup, I do not have to "Run as administrator" to connect. Actually I created a shortcut directly to "C:\Program Files\Nokia\Nokia PC Suite 6\OneTouchAccess.exe" in the "Windows Quick Launch area", so now I can connect with one click ;-)
I still got the "You do not have sufficient privileges to modify the connections properties. Only Administrators can create and modify connections" warning, until I selected "In the future, do not show this message".
/Thomas
Update: I don't have User Account Control disabled.Message Edited by tjementum on 01-May-200701:29 PM
Similar Messages
-
I recently attempted to re-install Mountain Lion on my MacBook Pro late 2012 model and the internet recovery is failing. I have absolutely no clue what to do here. Any help is greatly appreciated. Thank you.
- Currently if I boot it up there is a flashing folder icon with a question mark in it. I am assuming this means there is no OS because I wiped the SSD and tried to reinstall Mountain Lion
- When I hold Command+R, it prompts me to Choose Network... the problem with this is the wifi constantly is disconnecting. The Retina 2012 does not have an ethernet port so i have considered buying the attachment then returning when done.
Once again Thank you in advance.
Best.There is nothing to do if you don't have a reliable Internet connection unless you have a copy of the Mountain Lion installer application from when you first installed it.
Install or Reinstall Mavericks or Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
OS X Mavericks- Erase and reinstall OS X
OS X Mountain Lion- Erase and reinstall OS X
OS X Lion- Erase and reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
For three years my iMac and Mac mini were networked via Airport Extreme with a printer and the internet. More recently, I added an iMac and iPhone. PROBLEMS: A few months ago the Mac mini lost its connection to the printer, and now it cannot locate the network at all.
If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
Use the same SSID and password for both machines. Computers will connect to the strongest signal. -
I have an iphone 4 , but it still has the ios 4 , and i want to upgrade it to a newer version , but when I try to do it via Itunes it says there's a problem with the internet (and the internet it's working fine) and it won't work ,how can i upgrade?
try rebooting your computer.
-
Hi there i have just moved into a new pad and the internet is running on a proxy server how do i get my ATV2 to work ?
Bladerider900 wrote:
Thanks ...
You're Welcome. -
My iPad is crashing in programs and the internet.
My iPad has been crashing in programs and the internet. It also seems very slow to open internet windows. I have to close and reopen a lot. What can be the problem/s and how can I fix this.
Clear Safari and close the app completely. Close all other apps as well. After closing all of your apps, reboot your iPad and see if that helps the situation.
Go to Settings>Safari>Clear Cookies and Data.
If you are running iOS a 5 or 6 - Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Close app of the apps like this. Tap the home button twice.
If you are running iOS 7 - To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it. Close all apps in the same manner.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Hi when i switch on the macc 41 files open at once can not open any files while this is happing can still use AI & PS and the internet any help thanks...
Are you wanting to stop the 41 files from opening at once or is this intentional? At what point do they open when you power on the mac or when you boot Illustrator? What OS version are you using?
If you can answer the questions above can provide better advice, but you may be running into something similar:
http://www.mactip.net/stop-lion-restoring-previous-files-apps/ -
Help I Lost my iPod 5 and the internet is cut off and i downloaded the app find my iphone
Thank You That Is What I Am Doing I Lost It At My House Yesterday And We Cleaned The House And Looked But Nothing Maybe It Will Turn Up
-
Hello,
When I turn on my iPad 2 and go onto the safari and go onto google the wireless router cuts off and turns the Internet off and the Internet doesn't respond and then after I have to turn the router off and turn it on and then it is back to normal it has happening when I recently updated the new iOS 6 on my iPad since then it was been doing this please can you help and help me sort the problem out
ThanksSome things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
At random points throughout my laptop usage, I randomly disconnect from the internet and receive these 2 messages:
1. The connection between your access point, router, or cable modem and the Internet is broken.
2. The default gateway is not available.
It fixes the issue for a short period of time, but constantly happens. This is really starting to annoy me. I have no problems on any other internet, and other people i live with are connected with no issues to the internet. I have tried a number of solutions
online that has "worked" for others to no success such as resetting the router, fooling around with command prompt, and changing the performance settings to not drop internet when low on power. Does anyone have a solution for my technical problems?
I am running Windows 8.1 on a Lenovo ideapad that is less than a year old. I will be honest I am not a very knowledgeable person when it comes to computers, so please use simplified explanations.Checked this ?
http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/window-networking-troubleshoot-error-the/c130ede9-757e-4224-9ae8-3cceb82eeb74
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread. -
Problem with Windows Vista, PC Suite and E90
PC Config:
SO: Microsoft Windows Vista Business TabletPC (ENG Language)(with all the Updates for the SO).
Nokia: PC Suite 6.84.10.3
Phone: Nokia E90 Comunicator with firmware V07.24.0.3 -12/06/07 - Nokia E90-42
After installing the PC Suite and establish the communications if I check the Event Viewer I will find a large set of error messages marked as critical.
The error text is the following:
..................Start_error......................
The device E90 (location 353659010805204) is offline due to a user-mode driver crash.
Windows will attempt to restart the device (till 5 times) more times.
Please contact the device manufacturer for more information about this problem
The source is: DriverFrameworks-UserMode
.................end_error.........................
Does anyone know more about this?
Thanksthe window7 is stil new whait for the server pack to solev it
phones i have 2730c - C1
KUDOS ME IF YOU FIND MY ANSWERS HELP FULL -
Help...I'm connected to my network and the internet but cant get on!
Ok, so im connected to the internet and my network but when i open safari i can't get on the web. It says to run network diagnostics and when i do it tells me all is working fine!!!
I've now added Firefox which will allow me on the net. But when users log on it wont automatically pick up the proxy settings. Its killing me because its such an annoying problem.
It all started when we added a new ISA server for the PC and Xserve networks but we have since proved that that isn't causing the problems.
ANYONE GOT ANY IDEAS!?!?! I NEED HELP
G5 Mac OS X (10.4.6) Mac Xserve and Xraid network going through an ISA ServerHey
Just had a go and now help! We had an ISA expert in and a PC expert plus me and another MAC expert.....still no help!
We formatted a comp and now safari works!
Its killin me cos i don't wanna format all my comps
arghhhh! -
In the office, All my colleges use Windows laptops. The Internet connection is out of LAN wire installed in one of the computers. Others use Internet by creating adhoc connection. However none of the apple products are being able to connect to this connection.How can i connect my MacBook Pro or iPhone 5 to this Internet network?
Just how is the one computer connecting to the internet? What type of connection does the office have, DSL, Cable or is it a Data connection through a Cell phone provider.
I doubt all other computer are doing Ad-Hoc but are probably Sharing the Internet connection with Internet Connection Sharing from that one Windows base PC.
All you khave to do is Connect to that same WiFi SSID name and have the correct password for it. -
My husband just got me an iPad2 for Mothers day and today when I tried to sign on to it it said I do not have a cellular data network? I'm at work where we have Wi-fi. Can't I just use that to sign onto my webmail and to get onto the internet?
If you are in a wi-fi only area, then you need to join a wi-fi network. Does your office have wi-fi? Has the Admin given you the iformation to join the wi-fi network?
To join a wi-fi network...
1. Go to Settings/Wi-Fi
2. Tap Other...
3. Enter the name of your wi-fi network
4 Tap Security
5. Tap the type of security the network uses and return to Wi-Fi
6. Enter the password and tap Join -
How can I use a wireless printer and the internet at the same time?
Hi there, I just installed a wireless printer but to use it I have to click on the Airport icon and select the printer in the 'devices' list. This deselects my connection to my wireless modem. Is there any way I can print and look at the internet at the same time? This does not seem right to me, I print a lot of info from the net and don't want to spend time selecting and waiting for connection back and forth all the time.
BoI have a Linksys WAG54G2 wireless G router. This router has a Wireless Protected Setup button which I understood would initiate a search for wireless devices and aid setup but it seems to do nothing. I made the mistake of tryig to use the linksys installation disk to access a setup wizard and that just reset my entire network back to factory settings and it took me 4 hours to reconfig my system. Won't be touching that again. It all seems odd, the printer is compatible with the router as far as I can see but I don't know how to get the router to recognise the printer.
bo
Maybe you are looking for
-
Reduce out put field length of alv output in back ground
Hi all, Is there a way to reduce the output length of the field in back groundfor ALV out put Its back ground I have thsi things in my field catalog wa_fieldcat-outputlen = 10. wa_fieldcat-ddic_outputlen = 10. If the field has value of length 10 char
-
Using pipe IO in Labview 6 for Solaris
Hi, I need to be able to communicate with a process from Labview. As I'm using UNIX pipes seem to be a neat way of achieving this. However, I've never used them before and am a little confused. Specifically the "open_pipe.vi" requires "path to named
-
JMF experts, please help!
Hello I'm trying to write a program which should play a mp3-file. The problem is that I get a strange error message. The program works for ".wav" and ".mpg"-files but unfortunately not for mp3. I list the code for the program and the error message...
-
I want to save one cookie when exiting FF. I want to delete all other cookies.
I want to save one cookie when exiting FF. I want to delete all other cookies. I have researched all related questions and answers but fail to see an answer to my question. Can "delete all cookies when exiting FF" have an exception?
-
Hi Experts, i need to print dynamic texts in the same page of the smartform. the print should start from the left side of the page and when the texts overflows it should start printing on the right side of the same page.something like