Vista "Problem Reports and Solutions" - Compatibility issues?

The Visa +Problem Reports and Solutions control panel+ is reporting three problems which I cannot seem to be able to find a resolution to.
( So far I've just installed Vista 32 business ed. on my iMac 20". Installed bootcamp drivers, updated bootcamp to 2.1 and applied Vista updates.)
*The Problem Reports and Solutions control panel reports the following:*
1. Download and install the driver for Apple performance counter
This problem was caused by Apple performance counter, which was created by Apple Inc..
2. Compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and Windows. This problem was caused by a compatibility issue between Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 and this version of Windows. Intel 82801GBM (ICH7-M) LPC Interface Controller - 27B9 was created by Intel Corporation and is distributed by Apple Inc..
3. Problem caused by Apple Desktop Null Driver.
This problem was caused by a compatibility issue between this version of Windows and Apple Desktop Null Driver. This product is usually distributed by the company that manufactured your device or computer. Note. If you bought Apple Desktop Null Driver from a retailer and installed it yourself, you will need to contact its manufacturer.
Are these genuine, and if so, is there a solution? No solutions are proposed by Vista itself.
Mac OS 10.5.5 , bootcamp 2.1
Message was edited by: noutram

A performance counter is not something that is usually in use by any application except by the developers of the unit itself. nothing to be alarmed about (well, except perhaps that it should have been removed).
A null driver is (as the name indicates) null, there is no functionality assigned with it. MS error message is just brilliant "there is an error in your null driver", like what, there is no functionality in a null driver. So no problems there either.
I got the 2 above error messages on the very first generation 17" MBP for ages and so far not seen any impacts in it for my work.
The Intel issue is interesting, it might be a good idea to see if Intel has an updated driver for the problem.

Similar Messages

  • Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

    Hello I was charged twice for adobe story plus, I need this problem corrected and a refund issued for one of the subscription charges, I tried chatting with Adobe and they were unable to help me. Where is email support?

    This is an open forum, not Adobe support... you need Adobe staff to help
    Adobe contact information - http://helpx.adobe.com/contact.html
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • Seagate ST9750420AS HDD and W700ds compatability issue

    There seems to be a compatability issue with the Seagate 750GB drives (ST9750420AS) and the W700ds (and possibly other W series notebooks).
    With the controller set to RAID in BIOS Windows 7 and possibly other OSs can not access the HDDs. This configuration results in a 7B "inaccessable boot device" error BSOD.
    Testing revealed only the ST9750420AS with FW 0001SDM5 (the only FW avaible) results in the 7B BSOD regardless of the RAID driver version installed. I have not phiscally removed the Turbo memory device to see if it plays a role in the problem or not.
    The W700ds (2757) system I have available to test is compatable with the following Seagate (drives with various FW versions):
    ST9160823ASG
    ST9500325AS
    ST9500420ASG
    ST9500420AS
    ST9640320AS
    These were tested with Widows XPP 32bit, Windows 7 64bit and Linux 64 bit, these were tested in both RAID and non RAID configurations.
    And not compatable with:
    ST9750420AS, tested with Windosw 7 x64 in RAID configuration.
    Any comments, corrections or resolution welcom.
    Thanks
    JMG

    Hi Jamessts,
    Welcome to the HP Forums!
    I have read your post on installing your HDD to your HP computer, and I would be happy to be of assistance!
    To determine your product specifications, I will need to know what the Product and Model Number of your desktop is. The next piece of information I will need is the version of Windows you have on your computer.
    Since you stated that the HDD works in another computer, I suggest following this resource: "Windows could not complete the installation..." solved by MarkBeacom. This should help in setting up your HDD for use on your computer.
    Please post back with the results of your troubleshooting, and I will diligently follow up with you!
    Cheers
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Can someone provide HTML and CSS compatibility issues list in IE 12?

    Hi There,
    We recently come to know from our team members that Microsoft going to release Internet Explorer (IE) 12. But there are some compatibility issues with HTML and CSS which can break our web sites. Can someone provide us list of issues that we can face in IE
    12, so that we can work on their resolution.
    Regards,
    Ankush

    Hi,
    http://status.modern.ie
    or
    f12>Console tab>
    document.body.style
    Rob^_^

  • Reporting and analysis Server Issue

    I have Installed OEPM 11.1.2 and configured everything and all of them were successfully configured except for Reporting and analysis where it failed to deploy to the application server. What could be the issue. I couldn't log in to workspace as it says the reporting and analysis server is not up and running at port 6800.
    When I validated the setup it advises me to start the web analysis application and run the configuration again but there is no specific Web Analysis service in listed in the services window. Whatever the services are listed I've started and ran the configuration again but no success. Am i forgetting something?
    Please help me with this guys. Thank You.
    Junaid

    Hi Junaid,
    OS is OK!
    It seems some services not configured correctly; I can just comment if possible then you can stop all hyperion services and reconfigure most of the time it resolve issues related to Configuration.
    Thanks
    Focusthread Hyperion Trainer
    [http://focusthread.com/training]

  • ***HELP*** Creative ZEN 8GB Vista Problems. NO SOLUTION FOUND

    I have searched the web and the forums. I cannot find a solution anywhere.
    My Creative Zen 8GB will not connect in vista. Ive upgraded the firmware to .3.0 and it still will not detect. Ive downloaded the newest Creative Media Browser and it still will not detect.
    I searched the creative knowledge database and came across the "regedit USB allow permission tweak". regedit will not allow me to change the usb settings even though i have administrator rights.
    i've searched the forum and came across about 0 threads regarding this issue and not one of them had a response from a Creative Administrator/Moderator.
    has anybody at all gotten creative zen 8GB to work with vista? If i cannot get this to work, I am going to return this POS.
    Can anybody help?

    yes i tried the CD that came with it. but it still does not work.
    i have upgraded the firmware on an XP desktop and installed the newest creative media browser on my vista notebook and still my Creative ZEN will not detect on my Vista notebook.
    I called technical support and the only solution they gave me was to "update my MTP driver in device manager" but when i do that, vista tells me that "windows has determined that the most appropriate driver is already installed"
    i know SOMEBODY out there has had to have come across this problem and solved it somehow.
    com'on guys....help me out here

  • Windows 7 and Director - compatibility issues?

    I have the old Macromedia Director 7 and Lingo which worked great on XP and Vista - unfortunately it won't work at all on my Windows 7 Home Premium!  I also have Adobe PageMaker 6.5 which also does not like Windows 7 (but as it worked well on the previous Windows versions I was loathe to purchase an upgrade).
    I have tried to download the trial versions of the newer Director but nothing happens after you press the 'download' button - frustrating!  I have removed the pop up bocker - I have even turned off my anti-virus software incase that was the issue - nothing works!
    Is there ANYTHING happening in the future which will allow these products or their newer versions to run effectively on Windows 7??  This is 2012 for goodness sake - surely an update/upgrade would have been on the drawing board to keep pace with Microsoft?
    If someone can assist me I would gratefully appreciate it!
    Sahra K

    I was just wondering, did you ever get any answers to this. I'm having the same problems with both Director 8.5 and DirectorMX 2004
    [email protected]
    Bruce

  • Financial Reporting and Microsoft OLAP - issues with MDX

    We have installed Oracle/Hyperion Financial Reporting 11 for a client. They are using a Microsoft Analysis Services 2000 'cube' as the data source. The cube has an Account Dimension with 9 levels in its hierarchy. We have found Financial Reporting truncates the MDX when querying Accounts at the lowest level (around 100 characters in the length of the MDX string) or when querying multiple account groups at a higher level (and displaying descendants). Does anyone have any workarounds or solutions? Is there a better way of doing things? Is there any documentaion on the limitations of using FR over MSOLAP? We have have built the cube with an Account No as the Short Name (Key) and the Account Description as the Name but FR insists on only displaying (and using in the MDX) the long Account Descriiption - whereas using Essabase you can drill down on the Member Names [Account No] but display the Alias [Account Name]

    Hi,
    I don’t found the similar issue, please confirm your hardware compliant with the server 2012, update your BIOS at last release.
    Please rerun the validation test then post the error or warning part, that report will quickly locate the issue.
    Please try to install the recommended hotfixes and updates for Windows Server 2012-based failover clusters then try again.
    Recommended hotfixes and updates for Windows Server 2012-based failover clusters
    http://support.microsoft.com/kb/2784261/en-us
    More information:
    Windows Server Catalog
    http://www.windowsservercatalog.com/default.aspx
    Hyper-V Virtual Fibre Channel Overview
    http://technet.microsoft.com/en-us/library/hh831413.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • CIN Reports and Shipping State Issue

    Hello everyone,
    Can anyone help me out on the below mentioned points:
    1. Standard CIN Reports. ( AR CST/VAT, AP CST/VAT, AP Service Tax Reports )
    2. We have around 22 plants. We are procuring materials from a Vendor (State: Karnataka) to a plant located in state Andhra Pradesh. But if the Vendor plans to ship goods from another state,
    say, Tamil Nadu. How will this impact?
    What is the procedure i need to follow? The PO will be created on Vendor(Karnataka) and what about MIGO and MIRO. My problem is with the tax codes that i need to use because it is being shipped from another state Tamil Nadu.
    How to address this issue.
    In short, Ship from state is different from the procurement vendor state, how will this be handled ?
    Any help is highly appreciated.
    Thanks,
    Anil

    For question 1 > The report is RFUMSV00 . Refer master note for VAT 818732.
    For question 2 > You have to have partner function where the goods supplier would be different. As such the purchase is from a different state in which case I believe CST will be relevant which in case of VAT based CST will have to be inventorised.

  • AX and WinXP compatibility issue

    Hello,
    i got my secondary WinXP Pro C2D SP2 Laptop to work with AX without problems. I can see Loudspeakers in iTunes and also my iPod Touch is seen as a remote controller.
    This works both with WLAN and Ethernet cable connected to my ADSL Router.
    AX light is green and it doesn't give any errors.
    Problem:
    With my primary PC, WinXP P4 SP2, AX doesn't work at all. AirPort Utility doesn't recognize AX to the list. Neither i can see my IPod Touch Remote controller in this primary PC. I wonder if this could be a common problem for both ?
    Equipment and connections:
    TeleWell ADSL Modem Router with WLAN 802.11 b/g
    Airport Express with 802.11n, ver. 7.3.2
    AirPort Utility, ver. 5.3.2 in both WinXP PCs
    iTunes 8.0.20 in both WinXP PCs
    AX working as a client in existing wireless network
    With primary PC i have tried following combinations to get AX to Airport Utility list without success:
    1. PC connected to ADSL Router with Ethernet cable and AX connected to ADSL Router with Ethernet cable
    2. PC connected to ADSL Router with Ethernet cable and AX connected to ADSL Router with WLAN
    3. PC connected to ADSL Router with WLAN and AX connected to ADSL Router with WLAN
    Both Windows and my Zonealarm Firewalls are off.
    No Firewall active in ADSL router.
    WLAN security is off (no WEB/WPA used).
    AX gets its IP address and AX is also seen in ARP table. This can be seen in ADSL Router. Ping works normally to AX from both PCs.
    After these tryouts i'm thinking if this is somekind of compatibility or 3rd party program issue that i have on my PC. Specially because both iPod Touch Remote controller and AX doesn't work in this primary PC, but they work in a another one ?
    I have read already quite a many of threads from this forum but haven't found a similar case.
    Does anybody have an idea what this problem could be ? Could some other installed programs disturb iTunes/iPod Touch/AX usage ?
    One clear difference there is between the PCs, primary PC (that who's having problems) has German OS and secondary English OS. I doubt anyhow that this could be a problem.
    Greetings from snowy Scandinavia and thank you for your support,
    Petri
    Message was edited by: easterson

    Hello,
    i got my secondary WinXP Pro C2D SP2 Laptop to work with AX without problems. I can see Loudspeakers in iTunes and also my iPod Touch is seen as a remote controller.
    This works both with WLAN and Ethernet cable connected to my ADSL Router.
    AX light is green and it doesn't give any errors.
    Problem:
    With my primary PC, WinXP P4 SP2, AX doesn't work at all. AirPort Utility doesn't recognize AX to the list. Neither i can see my IPod Touch Remote controller in this primary PC. I wonder if this could be a common problem for both ?
    Equipment and connections:
    TeleWell ADSL Modem Router with WLAN 802.11 b/g
    Airport Express with 802.11n, ver. 7.3.2
    AirPort Utility, ver. 5.3.2 in both WinXP PCs
    iTunes 8.0.20 in both WinXP PCs
    AX working as a client in existing wireless network
    With primary PC i have tried following combinations to get AX to Airport Utility list without success:
    1. PC connected to ADSL Router with Ethernet cable and AX connected to ADSL Router with Ethernet cable
    2. PC connected to ADSL Router with Ethernet cable and AX connected to ADSL Router with WLAN
    3. PC connected to ADSL Router with WLAN and AX connected to ADSL Router with WLAN
    Both Windows and my Zonealarm Firewalls are off.
    No Firewall active in ADSL router.
    WLAN security is off (no WEB/WPA used).
    AX gets its IP address and AX is also seen in ARP table. This can be seen in ADSL Router. Ping works normally to AX from both PCs.
    After these tryouts i'm thinking if this is somekind of compatibility or 3rd party program issue that i have on my PC. Specially because both iPod Touch Remote controller and AX doesn't work in this primary PC, but they work in a another one ?
    I have read already quite a many of threads from this forum but haven't found a similar case.
    Does anybody have an idea what this problem could be ? Could some other installed programs disturb iTunes/iPod Touch/AX usage ?
    One clear difference there is between the PCs, primary PC (that who's having problems) has German OS and secondary English OS. I doubt anyhow that this could be a problem.
    Greetings from snowy Scandinavia and thank you for your support,
    Petri
    Message was edited by: easterson

  • Crystal Reports and SAP Integration Issue

    Gurus,
    I am in the process of reinstalling my SAP B-One(2007 A) Server, after SQL Server and SAP Server and Client installtions and its related patch PL10. My machine is fully loaded and to go, but I am stuck with Crystal Reports Basic 2008 installtion.
    After installting the below for Crystal Reports:
    1) .NetPlatform SP1 setup (dotnetfx35sp1)
    3) Crytatl Runtime
    4) Crystal Setup
    5) Crystal SAP Viewer
    6) CR2008_SP3
    My integration between SAP and CR are fine but after first log off and log on of SAP B-One.
    Shows the below messages:
    - "The new version of Add-on Crystal Reports for SAP Business One is
    installed. Upgrade the Add-on in the current Common DB."
    followed by the below one.
    "Wrong Executable digital signature for Add-On".
    Any advices on how can I upgrade the Common DB.
    Faisal

    Hi  Faisal,
    Is this issue realted to the previous thread you have posted. It looks similiar.
    Re-installation meaning that you had installed aprevious version and now upgrading or is it a full installation.
    Regards,
    Rakesh N

  • SAFARI problems update and solution

    I spoke to apple tech phone support and they said that the most recent security update knocked out some of the settings for linksys routers. Tech support said that to correct this issue you have to go to an apple store and ask for the firmware patch to repair the problem (if you are using a linksys router). I won't be able to make it to an apple store until tomorrow but I'll be sure to keep you posted.

    The suggestions found on this post may offer relief in the interim.
    iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD   Mac OS X (10.4.8)   LaCie 160gb d2 HD Canon i960 printer

  • Bug report (and solution): adding multiple records through Java API in bulk

    I have found some bugs in the Java API (version 4.1.25) that makes it impossible to add mulitple values in bulk to a RECNO database. The fixes are as follows:
    MultipleEntry.java, line 80:
    "DbUtil.int2array(curr_off, this.data, pos);"
    should be replaced by
    " DbUtil.int2array(recno, this.data, pos);"
    MultipleRecnoDatabaseEntry.java, line 130:
    "return append_internal(data, doff, dlen, recno);"
    should be replaced by
    "return append_internal(data, offset, len, recno);"
    Regards,
    Johan Walters

    Hello,
    It looks like there were some corrections to this area in the post 4.1 i.e. 4.2 release. And I do not see these same issues in the current 5.1.25 release. If you do find them in the current release, just let us know.
    Thanks,
    Sandra

  • IE 7 and 8 compatibility issue...

    Hello! I need help!
    I'm a recent Dreamweaver user and I've created my entire site and now have run into a problem in IE 7 and 8. I know my menus are a little wack but this is how I have managed to have exactly what I want.
    Everything works great in all browsers (including IE9) except IE 7 and 8... the entire content of the page appears some 20 pixels lower than it should which throws off my menus.
    I uploaded the site temporaraly to try and fix the problem: www.info-yqq.com/index2.html
    Can this be fixed without any major restructuring?
    Please help!

    Actually you have other problems on that page -
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
    </head>
    <embed src="AC_RunActiveContent.js" width="0" height="0"></embed>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Y'a quelqu'un l'aut'bord du mur</title>
    <style type="text/css">
    <!--
    body {
    Note the duplication of head content (in bold).  Change that to this -
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
    <title>Y'a quelqu'un l'aut'bord du mur</title>
    <script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
    <style type="text/css">
    <!--
    body {
    and see what happens.

  • Itunes and AIM6 compatability issue

    so my problem is that itunes opens but it freezes when i try to play a song i just recently installed AIM6 this happened before when i installed it so i removed AIM6. also i have itunes 7.6. can someone help me with this?
    Message was edited by: Zachg

    Hey there
    smrt.neha31,
    It sounds like you want to disable the Automatic Downloads from the iTunes Store and App Store on your iPhone. Take a look at the article linked below, it provides information that should help you both enable and disable the feature.
    Enable Automatic Downloads - Apple Support
    So long,
    -Jason

Maybe you are looking for