Vista problems with respect to Networking...

Hi all: have been trying to sort it out for the better part of today but no progress made
Bought a new MacBook Pro a week ago and need to install Windows on it. Did the partition and installed Vista 64-bit. Installed drivers from the original Leopard OSX DVD that came with the computer but when in the Windows part of the computer none of the iSight, Ethernet controller, Network controller or SM Bus controller are recognized (the dreaded yellow sign with exclamation point in the device manager section). Uninstalled everything and tried again with Vista 32-bit. Nothing. Tried the Bootcamp 2.1 updates and still nothing.
Any suggestions?

Anyone?

Similar Messages

I have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

i have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

What brand/model USB drive? Is it bus or AC powered?
On Mail...
First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
Users/YourUserName/Library/Mail
Users/YourUserName/Library/Mail Downloads
(Could be a different folder here if you chose such in Mail Prefs)
Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
/Users/YourUserName/Library/Preferences/com.apple.mail.plist

Window 8 WiFi problem with Cisco wireless network

Anyone encounter a Windows 8 WiFi authentication problem with Cisco wireless network?
We are using WLC 5508, 7.2.111, and AP 3602i with WPA2.
Sent from Cisco Technical Support iPad App

This problem occurred with Soney, and Dell models. Lenovo with Windows 8 factory installed is working fine.
Won't make any difference as these laptop's wireless NIC cards are different.
Can you try with OPEN authentication. If the Sony and/or Dell laptop works, then you start cranking up the security and/or encryption settings until you break them.
I'm with Scott here: It's got to be a wireless NIC card driver.
As what George has stated, post the debug of the failed attempts.

Homehub 3 problems with wifi and network - please ...

I am hoping someone can help me, as I am struggling to work out why I am getting so many problems with my network at home.
I have BT Infinity, and a Homehub 3A. I have had BT broadband for years. Infinity was added in Feb 2013. The HH3A is the original one supplied to me years ago.
When Infinity was installed I also added a pair of TP Link powerline adapters, to provide a connection to an unmanaged network switch in the lounge.
A rough outline of what I have connected to the router is:
Wired
- Synology NAS Diskstation
- Win7 laptop
- powerline adapter
Wifi
- 3 iphones
- 2 ipads
- Win7 laptop
- 2 Win Vista laptops
Powerline / network switch
- Sonos bridge
- TV
- BluRay
- Vodafone booster
- SkyHD
Recently I am getting a number of different problems:
1) wifi drops to everything connected to the router, at the same time, all blue lights are on the router
I lose wifi connection to the internet, from all devices, at the same time, but also the connection from my laptop to the NAS drops.
2) Anything connected to the Powerline adapter is rarely available
I try and connect to Sonos, or my sky box or the TV, but they aren't connected to the router. The lights on the powerline adapters indicate everything is fine, and the HH3 has all blue lights. But my iphone and laptop cannot find my Sonos. My iphone app cannot find my sky box. And on the TV it says it is not connected to the internet. To solve this problem I have to power cycle the pair of Powerline adapters.
Some observations:
1) these problems are all since Infinity was installed. I have no idea if that is relevant.
2) My NAS Diskstation has a powersave mode. I noticed last night that when I woke it up, the powerline adapters disconnected briefly, before reconnecting. But when they did reconnect I could not access anything connected to them. It was as if the NAS had booted them off the network, and then they couldn't get back on.
3) I run a 10m brand new Cat5e cable from the infinity modem to my router, because the modem is in the garage.
Can anyone help? I am tearing my hair out with this.
Thanks for any help.

If you set the devices on the home hub to always use the same IP address, then that can help.
The problem is that when the DHCP lease expires, the home hub often gives the device a different IP address, and this breaks the port forwarding rules.
Some routers allow you to specify which IP addresses are to be reserved, but the home hub does not.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Vista problem with Dreamweaver locking files indiscriminately - I'm not alone

I've seen questions posed in the past about Vista locking files - and I am having the exact same problem, which I posted about a while ago. Today it happened to me again.
There appears to be no pattern as to why this happens. Was happening to me continually until a few weeks ago. Then it stopped without me taking any course of action (just putting up with the annoying bug is all I could do).
You just have to remember to save the file under a different name to ensure that you don't lose your original file. The original file does not appear in the File Manager window (after you close down DW, nor does it appear in the Trash bin - it's just gone).
Initially I thought it may be due to having the file open, checking it in Firefox and possibly FF taking over the file, so it gets locked by DW. Today, I only opened the file (no checking in a browser at all) made a minor correction and I was locked out of the file.
Co-incidentally, a few hours ago, I found a website via twitter where this seems to be a known issue, but no there appears to be no response from Adobe about this bug. http://www.sherylcanter.com/wordpress/2009/05/locked-vanishing-files-in-dreamweaver-and-in design/
Previously, I used to restart the pc and I'd lose the file altogether (as explained above). After reading the above website, I'm going to leave DW open for a while to see if it's true about the file 'unlocking itself'. Thankfully,, this time, I did backup the file just in case. In the past I'd lost a fair amount of work, that I'd had to recreate - very annoying !!
I thought I'd post up a graphic of the error messages - to see if others are seeing the same thing. This will need to be bought to the attention of the DW tech team, but not sure how they can address the issue as it is a difficult thing to reproduce on a consistent basis.
AN UPDATE; Checked for the file in Windows File manager - the index.html page is not listed in the sitefolder. Back to Dreamweaver, you can still see the locked file, do a refresh and the index.html file has disappeared.
I open index2.html (the resaved version of index,html), rename it to index.html and it allows me to do so this time round.
PS: At the same time I opened inner.html, made a change, no problems with the file locking.
Weird !!
Further update:
Just found a reply by David Powers here: http://forums.adobe.com/thread/437034?tstart=30
I had tried to do a search using similar keywords when this started happening to me months ago - couldn't find anything at the time.
I even posted to a private forum where people should have known about this issue - but it was never responded to.
Will see if this fix works for me.... though I can't understand why it only does this occasionally - if someone needs to take control of the folder, surely it should be happening all the time.

Nadia,
Although Dreamweaver "reveals" and demonstrates it, I think that it's a deep-seated Vista permissions issue.
It's random and occurs on files I create from scratch and files I receive from others.
Full permissions for every single user and group on my PC doesn't work.
"Take ownership" by my account or Administrator or Administrators or System or Everyone or Authenticated Users doesn't work.
UAC deactivation doesn't work.
Command prompt to unset attributes (like read-only) says it ISN'T read-only, but the right-click properties show that it is.
Only this works so far.
Activate Vista's Administrator account (be sure to then set a password for it).
Log in as Administrator, and the issue no longer occurs.
Here's a link for instructions on how to activate the Vista Administrator account.
Enable the (Hidden) Administrator Account on Windows Vista [The How-To Geek]
I'm open and hopeful for a better solution, but for now I've got work to do, so I'm using Dreamweaver logged in as Administrator.

Vista - Problem with Audio config!!! please help!!!

I just finished a clean install of Vista and installed iTunes. When I try to open iTunes an error message pops up saying "iTunes has detected a problem with youraudio configuration.Audio/Video playback may not operate properly." I have looked on teh forums and all I have seen is something about uninstalling QuickTime and then reinstalling it. I have tried that twice and I still get the same error message. If anyone could help that will be great.

Try this -> http://docs.info.apple.com/article.html?artnum=304424

MOVED: Latency problem and potentialy linked Vista problem with K9VGM-V

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=107394.0

Like you already mentioned: you are using some beta-drivers which may cause some trouble.
Please verify that you installed the driversin the propper order: chipset drivers first (VIA-drivers that is, you can have a look at VIA's website to see if there are any VIA Drivers for Vista you can use. Install VGA drivers after that and the SB drivers last.
Just a tip: I recommend you have a look at your power supply unig. A 350W PSU with your hardware probably is not enough to run your system on. It even may cause your system to act strangely, like you just described.
How many amps on 12V rail?

Problem with Airport wireless network utilising a Time Capsule. No internet connection?

Right, I have an Apple Mac and I am creating a Wireless network with an Apple Time Machine. I have had both devices for approx 2 years, they have be fine to date - until I now have the following issue: The Wirless network has been created and can be connected to but that network isn't then connected to the internet. IN have checked with the Cable network provider Virgin and there is a network without proplem provided to the Modem - I have also connected an ethernet cable to direct to the Mac and connected to the www, no probs. I have also asttempted to reset and set up my time capsule / airport again howver the same problem arises. When I go to network Diagnostics I Have a green light for the following; Airport, Airport Settigns, Network Settings,Network Settings, ISP then an amberlight for Internet and server.....Please assist!!!! Is this an ISP address issue. Welcome any help, Thanks in advance. Jimbob

Sounds like chaos..
How many outlets are we talking about and what specific equipment?
Do you really need routers on every one? How many clients do you use?
Basically there are three non-overlapping channels on 2.4ghz.. using more than three routers in the house is pointless as they will just interfere with each other.. range on 2.4ghz should be sufficient to reach at least half a normal house from one AP. If not there are better high power routers available.
And there should be just one device that is the main router.. all the other routers should be bridged/ wan bypassed so they are merely AP and switch. Otherwise NAT will cause issues to devices stuck behind a secondary router.

Satellite L30: Vista problems with pages minimising

Hi,
i have just bought the toshiba Satellite L30 laptop and i am am having problems with pages minimising whenever i click on the page. Most of the time this happens when i click on the scroll bar, but it also happens when i click on any part of the page and when im typing.
It's getting very annoying. I have only had this laptop for about 2 weeks and the problem has been there since day one. Im runing Windows vista home basic.
Does anyone know the cause and/or how to sort it out?

Hi there,
be more precisely with your error description, because its hard for anyone whos reading this to find out some problems without knowing which "pages" do you mean. What a kind of program do you use?? Word, Internet Explorer or what???
Please, do us and yourself a favor and tell the problem with more details, that we can maybe help you. Or at least make some thoughts about your problem. :)
Greetings ;)

Experiencing three problems with Thinkpad T530 (Network, keyboard, and touch pad)

I bought thinkpad t530 2 years ago and gave it to my sister 4 monts age and recently she is experiencing few problems.
Before I mention any problems with it, I would like to mention that my sister hasn't updated software or driver for more than 60 days through lenovo solution center.
First, she cannot connect to a network (both wirelessly and internet cable).
The error says "There might be a problem with the driver for the Wireless Network Connection 2 adapter"
Second, the keyboard is not working.
The keyboard works fine when it was in BIOS mode and the keys associated with Fn keys work fine too, such as brightness contorl and backlit keyboard keys. However, it seems like the keyboard doesn't work in Windows 7. When she went into drivers manger to see what was the problem, it says, "Windows cannot load the device driver for this hardware. The driver may be computed or missing. (Code 39)"
Third, the touchpad and red pointer is not working.
Similar with the keyboard problem, the touchpad and red poting device is not working. In the device manger it says,"This device cannot start. (Code 10)."

Hi Rbtlr0215,
Welcome to Lenovo Community!
As per the query we understood that you are facing multiple issues on your ThinkPad T530.
For keyboard issue, check if the issue persisting in ‘Safe mode’ option. Check with uninstalling the Keyboard adapter from device manager.
For internet issue, check if the issue persists in ‘Safe mode with network’ option, Check with uninstalling the Wifi drivers from Control panel – Program & feature options.
For Touchpad issue, check with uninstalling the UltraNav drivers from Control panel – Program & feature options and restart the system, let the Windows install the generic driver for your system.
After performing all the above steps run thinkvantage system update utility to check for latest driver for your system.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Problems with printer and network connectivity

So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
Here's what I've checked/tried so far:
All the wireless services are enabled on my printer and my mac
I've reset the printing system on my mac, printer settings to factory defaults
Restarted mac/printer/iPod
Restarted router
Reinstalled HP printing software that came with the printer
All software is up to date
Wireless printing on another windows computer does work
Setting up wireless printing using the HP install disc doesn't work
Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
Printing over USB is problem-free
When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
More info
MacBook Pro (13 inch, early 2011)
Mac OS X Lion (10.7.2)
HP Photosmart e-All-in-One B110a
Router is a Huawei HG556a that I got from Vodafone NZ
Thanks in advance!

http://support.apple.com/kb/DL907

Airport Express Problem with Wired/Wireless networks simultaneously

Hello,
I'm having trouble maintaining a connection with my AX (2012) in a work environment. Basically, I have a Win 7 laptop connected via ethernet to the internet/corporate net. I have configured the AX to create a separate wifi network that does not connect to the internet. In order to connect to the AX, I have to disable both the Ethernet adapter and the WLAN adapter, enable the WLAN adapter, connect it to the AX's network, and wait for it to show up in the utility. Only then can I re-enable the ethernet adapter for internet access. Then, inevitably, the connection dies within 15 minutes and I have to repeat the whole process.
Can anyone tell me what's going on here? Is the wired network interfering with the wireless network? Is something configured wrong? Below is the output from ipconfig/all, if that helps. The AX is configured with a 169.254 range. IP address and behaves the same way whether the IP address is auto or manual, and there is no difference if the signal roams channels or is fixed to a single channel (I've played with them all).
Thanks in advance for your help.
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : DW1501 Wireless-N WLAN Half-Mini Card
   Physical Address. . . . . . . . . : 68-A3-C4-0C-CE-5B
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 10.0.1.2(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Thursday, December 06, 2012 2:32:22 PM
   Lease Expires . . . . . . . . . . : Friday, December 07, 2012 2:41:43 PM
   Default Gateway . . . . . . . . . : 10.0.1.1
   DHCP Server . . . . . . . . . . . : 10.0.1.1
   DNS Servers . . . . . . . . . . . : 10.0.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : XXX.com
   Description . . . . . . . . . . . : Intel(R) 82577LM Gigabit Network Connecti
on
   Physical Address. . . . . . . . . : 5C-26-0A-40-37-A9
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv4 Address. . . . . . . . . . . : 3.197.129.227(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.254.0
   Lease Obtained. . . . . . . . . . : Thursday, December 06, 2012 2:42:43 PM
   Lease Expires . . . . . . . . . . : Thursday, December 13, 2012 2:42:42 PM
   Default Gateway . . . . . . . . . : 3.197.128.1
   DHCP Server . . . . . . . . . . . : 3.156.134.20
   DNS Servers . . . . . . . . . . . : 3.156.130.30
3.156.130.130
3.23.190.40
                                       3.23.192.43
   Primary WINS Server . . . . . . . : 3.156.130.30
   Secondary WINS Server . . . . . . : 3.156.130.130
   NetBIOS over Tcpip. . . . . . . . : Enabled

Here goes - read this through completely and see if it makes sense:
1. Reset the Express to factory settings by unplugging it and plugging it back in while holding in the reset button - release the button when the light starts blinking - then wait for the light to blink slowly indicating factory default.
2. Disable the wireless and enable the ethernet on the laptop and connect an ethernet cable to the WAN port (the circle of dots) of the Express and use the AU toset it up in bridge mode to create a wireless network with a name of your choice - you don't really need a password but you can assign one if you wish - if you do not use a password you will have to choose to ignore the error message for no security.
3. Accept all other defaults and ignore any messages about not having an internet or ethernet connection and update or finish the setup - if you get a blinking amber light, open the AU and correct any error messages.
4. You can now disconnect the ethernet cable and disable the ethernet on the laptop and enable the wireless so you can stream iTunes to the Express - the laptop must stay wireless to do this - you can not accesss both at the same time - you can also use an iPhone or iPad or iPod to use Airplay and then you can use the laptop via ethernet for the internet.
5. To access the Express from now on, you have to use the AU wirelessly from the laptop.
The above is assuming that you don't currently have wireless in your office - the other alternatives are:
1. To hardwire the Express and have it create a wireless network and access the internet - you could then use your laptop wirelessly or wired to connect to the Express and use Airplay and your pc at the same time.
2. If your office has wireless, you can set up the Express to "join" the existing network - you can then do the same as in number 1.
I hope this helps - everyone's situation is different - the above scenarios work for me - you might have to do some tweaks but the info is there - let me know if you have any questions.

Problem with wireless secured network in hotels

Hello,
I'm a cabin crew member and I travel around the world almost every week. Since the update ios 6.0, my Iphone 4 16 GB doesn't connect automatically on the wireless secured network of hotels, while it worked before the update in the same hotels. My Iphone still connects automatically on my own home network, but I must ask every time to the help desk of hotels for manually connecting, by registering my mac adress on the router. Problems in Japan (Tokyo), USA (New-York, Washington, LA) and Senegal (Dakar). I'm really upset and Apple seems not concerned. Please help me.

Welcome to the forum.
I'm not so familiar with Linux, though've installed and dealed with some distrs, but as far as i know they're mostly compatible with each other.
So, check this forum (though it's Ubuntu) and try to find solution there, if no one here helps.
Also there's a member here called wyth, which helped some Ubuntu-users, which was great. Try PM him if no help here or on that forum.
//help will save the world

Vista problem with loading external JPGs?

I'm really pulling my hair out on this one. I did a quick
flash piece for a preschool's web site and have tried several
different Flash components inside of a larger FLA file that load
external JPG files in a predefined area. With each component, I
have received complaints (so far only from Vista users) that the
user sees nothing in the area where photos are supposed to be
loading. Instead they just see a white or black box.
Is there any known issue with this? They can see everything
else in the SWF file (the swinging girl and the text), but not any
of the loaded JPG photos. Can anyone else out there with Vista tell
me that they have the same problem? I'd like to track down what the
common denominator is.
I've asked two of the users to completely uninstall the Flash
player and reinstall it, but to no avail. Deactivating Norton
Antirvirus also didn't seem to do anything.
Here is the URL:
http://www.countryvillageps.com
-- the flash item is the top banner.

As Ned said the problem might be with the file structure on the server. Other problems may be with spelling. You computer may not be case sensitive to the names of the .swf files that you are loading, but your server might. So, on your computer when you are testing, second.swf is the same as Second.swf, or even second.SWF. But, on the server each of these variations is seen as a different file. Another problem is that when you are loading files from the same computer in testing, those files are close and so they load very quickly from your computer. When the files have to travel from the server, there will likely be a measurable period of time before the file is ready to be shown. This is particularly problematic with video that is embedded into an .swf. The whole file will need to be downloaded and uncompressed before it is available to play. If you stream the video as an external file, you can shorten the wait considerably.

Probleme with Hard Drive Network 1TB

Hello,
First I apologize in advance for my French / English translation
I'm not very good.
Yesterday I bought a hard drive has a special.
The hard drive was still nine races.
is a network hard drive (Iomega Home Media Network Hard Drive Cloud Edition 1TB - S / N: 6AAN2200EE).
It fonctionais very well, I navigais on the home page, the options ...
I started to put a day the firmware (being connected to the network, the better was worth by measuring security).
So I am the procedure, I download the firmware, sending the hard drive, the setting applies to days.
I see the blue bar scroll through until the moment he notes redemarage underway.
I let them.
reading the instruction he drive if it restarts it was not the done manually.
thing I did.
HDD starts, White LED lights Fixed LED Blue who says he is accessing the hard disk.
And the bot 30 Second LED Blaanche it starts flashing and without stop.
The manager software can not find the hard drive.
With you had this kind of problem and qu'lele is the solution?
I tried to contact iomega in France but no response.
I also began dismantling the drive to connect directly to my PC.
On the hard drive there are 3 Partition.
A non-allocated
A 20GB.
a 911GO.
No partition is accessible.
I tried another hard drive with NTFS partitiion, white light remains fixed and there is a steady red LED lights.
If someone has an idea
Thank you

Hello fonfonse
To be clear, were you trying to updating the firmware on the unit? If the unit has a flashing white power led after the update and it never goes to a solid state. That means the unit is not booting and the firmware update most likely has become damaged.
If that is the case support in your region would need to be contacted about the firmware imager utility which would correct the firmware issue.
Some steps to try this reset method:
#1. Press and hold down the reset button for 4 seconds.
#2. Then remove the power cord while still holding the reset button.
#3. Wait about 5 seconds and then plug the power cord back in while still holding the reset button.
#4. Release the reset button after 4 more seconds.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Vista problems with respect to Networking...

Similar Messages

Maybe you are looking for