Vista RC1 32bit and Live24

So... sound was working fine for me with my on-board Li've! 24bit (MSI K8N Neo4 SLI Platinum).
Now in RC I've loaded up the 0.04.0055 drivers (released september first)... and even though the soundcard shows up in the device manager the sound control panel claims that there are no output devices installed.
Is there anyone out there that has this working?
It says that RC support for this card is scheduled for September... does that mean the drivers that were released on the first? Or is there another release coming later this month?
Any help would be appreciated!
Friedmud

I actually figured this out thanks to a tip in another thread....
Just install the Windows XP drivers for this card! They work _immediately_... you don't even have to reboot!
Let me know if it works for you!
Derek

Similar Messages

  • Windows Vista RC1 x64 and Audi

    Anyone gotten their Audigy2 to work under this version? If so, please share what you did to get it to a state where you have sound. I've been installing/uninstalling and reinstalling for two days now, but I have NO sound.
    Oddly enough... the game port on the card gets installed fine.

    I've got the Audigy Platinum on a 64bit install, I've managed to get the drivers to install and vista to like them, but I can't actually hear anything. Yet the volume levels in vista do move, so sound is being produced, just not so I can hear it...

  • Vista SP1 32bit and USB Headpho

    Prior to upgrading to SP, when I used my USB headset (Logitech), Windows would discover it and disable my speakers. Now after upgrading to SP, it no longer does that. I've checked the settings, headset discovery is on and automatically mute speakers are both checked. But when I go into games, specifically Team Fortress 2, my speakers continue to play, my headset does not play sound. Windows recognizes the headset and the microphone.
    Any ideas?

    USB headsets work independently, they do not use the soundcard, and have their own audio device instead. This would probably be something you'd have to check with Logitech.
    Cat

  • MX 2004 in Vista Ultimate 32bit

    I am preparing to updating my computer to Vista Ultimate
    32bit and wanted to make sure that there were no issues with Studio
    MX 2004 (Dreamweaver, Flash, FIreworks, and Freehand).
    Sorry if this has been asked before; I couldn't find a topic
    after a while searching.
    Thanks in advance!

    It's not supported in Vista. You are on your own if you
    do....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Indish" <[email protected]> wrote in
    message
    news:f53kdo$c47$[email protected]..
    >I am preparing to updating my computer to Vista Ultimate
    32bit and wanted
    >to
    > make sure that there were no issues with Studio MX 2004
    (Dreamweaver,
    > Flash,
    > FIreworks, and Freehand).
    >
    > Sorry if this has been asked before; I couldn't find a
    topic after a while
    > searching.
    >
    > Thanks in advance!
    >

  • IPod Mini and Windows Vista RC1

    Ok, so I connect my mini to my Vista RC1 machine (FULL PC, not BootCamp), then went to bed. A few minutes later, the mini's screen lights up like I just connected it to the machine, then the main ipod folder opens up like it was set to hard-drive mode. For some reason, the iPod keeps reconnecting to the computer. I can't figure out how to stop it. Any help would be appreciated.

    Hello pc1971,
    And welcome to Apple Discussions!
    Have you tried some of the basics such as plugging it into different USB ports on your computer or try a different USB Connector Cable?
    Maybe try resetting the device with it connected to your system. To do this, toggle the hold switch on and off, and then press and hold the Menu and Select (Center) buttons together for a few seconds until the Apple logo appears.
    Otherwise, I would continue working through the recommend troubleshooting steps provided in this Apple support document.
    http://support.apple.com/kb/TS1369
    B-rock

  • Vista rc1 and live 24bit,

    Can someone tell me if its possible to get this card working on vista rc on 64x. I have been trying for 2 days and cant submit my review till i sort this out. i really dont want to have to download the 32bit version. i have found vista stable so far but i need this driver badly.

    Short answer, no. Long answer, yes.
    Don't use the Vista x64 drivers. Install the XP Pro x64 drivers.
    IF the installer doesn't work (it crashes for me) do the following.
    Download and install a Zip program such as 7z (it's free).
    Use 7z or whatever to extract all the compress files from the XP x64 download to some folder on your desktop.
    Open Device Manager, right click on the media device (I foget the term Vista uses exactly) and click Update Driver Software.
    Choose browse my computer and click on the browse button and point to the extracted folder. Make sure you check "Include Subfolders"
    Click next and that should do it. Restart. No need for F8.
    Sounds are good. I don't have any fancy speaker setup, just standard setero.
    I'm sure there are other ways to get it to work, but that's how I did it.Message Edited by Thrawn05 on 09-08-2006 06:43 PM

  • Vista RC1 and itunes authorizations

    Has anyone else upgraded to Vista RC1? I just did yesterday, and now whenever I try to play a song I bought on itunes, it asks me to authorize this computer. I enter in my password and it tells me that the computer has been authorized, but when I go to play the file it tells me I am not activated again. The cycle doesn't end.
    Any suggestions?

    I have the exact same problem. All Apple Support will do is suggest I unistall and re-install iTunes. I have done so three times and even taken off all my music and it still won't work.
    I am hoping some future build will resolve it. In the meantime, I am not using iTunes.
    Tom in Ohio

  • Mac Pro 6 GB, Parallels 1910 and Vista RC1

    Hi all,
    My 15 days trial expired yesterday so I couldn't try 1908, I've tried the first day two weeks ago and it was not working.
    So I'd like to know if somebody installed this config : Mac Pro 6 GB, 1910 and Vista RC1, since to test it I have to buy it, I will if it works.
    Thanks,
    Peloche,

    I've installed Vista RC1 5728 32 bits, installation was fine.
    I can't make the network to work, Vista doesn't find any network adapter altought Parallels is emulating Bridged Ethernet at en0: Ethernet Adapter Type Reaktek 8029(AS).
    http://peloche.smugmug.com/photos/97790991-O.jpg
    I believe that if I could access to Internet I'll be able to install NVidia 7300 GT driver and get a good resolution ?
    Thanks,
    Peloche
    MacPro 2.66, 6GB, 1TB; Mini G4, 1.45, 1GB; iPod 60 GB; 30" & 20" ACD; Apple IIC   Mac OS X (10.4.7)  

  • WIndows Vista RC1 (No Drivers)

    Well, hey there.
    I've just installed Windows Vista RC1 (March 2009). It's pretty recent.
    I went ahead and installed my Boot Camp drivers, but lo and behold nothing installed. I figured it was a botched installation, formatted that partition, and started again.
    So, I have tried once again and I am having all kinds of problems. For some reason I can't change the brightness of my monitor or keyboard (both are max all the time) and much of my hardware is not recognized. (By 'much' I mean 'all'. I manually installed a wireless driver.)
    Vista installs smoothly, I go about installing the BootCamp drivers and the installation window itself says it's installing each component, but the device manager isn't changing at all. Everything remains "Generic" & "Unrecognized".
    I just want Vista to play some games so I can blow off some steam & to do some 3ds Max stuff for college.
    Why is this simple process of installation so difficult?
    This Apple business is becoming very stressful very quickly.
    What I want is some regular old drivers for my stuff to work, there's nothing unique about the hardware so why is it so awkward and frustrating & difficult to get drivers? At best, can someone maybe tell me what kinds of hardware would be in the late 2008 MacBook Pro & how do I get my brightness adjustments to work?
    And also, why don't Apple just have individual drivers for download: Nearly every other manufacturer & vendor does (Dell, HP, Sony, Lenovo, Acer, etc.. They use third party hardware and drivers too).

    I don't have a MacBook series, and in the folder "Apple" are drivers for various devices.
    Try to install directly. If not try using Device Manager to update.
    And try running system file checker just for good measure
    *sfc /scannow*
    and follow that up with hardware check of your boot partition (schedule chkdsk).
    Whether you can install Nvidia drivers manually or not, that would help.
    And DO create system restore points and backups.

  • Video sync problem in vista premium 32bit even after enabling all movies

    video sync problem in vista premium 32bit even after enabling all movies and or movies.the vids are in itunes and ive tried to sync again and again.with no luck .
    and i cant seem to find a related or symular problem. has anyone else had this problem?

    cbeer77 wrote:
    Not sure how to find out the GPU acceleration
    Edit > Preferences > General
    If GPU acceleration is checked, uncheck it and see if that helps.
    Also:
    Could you give us a Mediainfo or Gspot screen shot of what's in the AVI wrapper?
    Please  answer Richard's question.

  • Qosmio G20-127: Hotkeys & Fn buttons don't work with Vista RC1

    This problem is really annoying me. Neither the Hotkeys(play, pause, forward, record, brightness) nor the Fn Buttons work since I installed windows vista RC1.
    I need to find a solution for this issue. If anyone has experienced it please provide me with feedback.
    Also the ConfigFree seems to be incompatible with Windows Vista, if anyone knows a trick or two I'd be most thankful

    Hi Shaker
    There is no trick or two!
    Do you know that the Windows Vista RC1 is not an official end version and the RC1 version contains about 1500 bugs!
    Furthermore to use the Toshiba features like the FN buttons or the hotkeys you will need the Toshiba drivers. BUT you will not find any Toshiba drivers for the Windows Vista at this time.
    Why? Because the Windows Vista is not official on the market. Therefore if you want to use the Vista at this time on your notebook you have to use it without the Toshiba options.
    But Im sure that you will get the Toshiba drivers if the Windows Vista was fully developed and official to buy.

  • Windows Vista RC1 + iTunes 7

    Hey,
    I was just wondering if anyone knows what i can do with my iTunes. Here's my problem...
    I'm using Microsoft Windows Vista RC1 x64. I've installed iTunes and I can use the iPod as an external storage device, as I always could with Windows XP Pro SP2. However, when I add music to the iTunes (from such as a CD that are stored in my Music folder), it "looks" as if it's uploading the song but it isn't.
    I have the iPod as manual update, so i drag a track over, and it has the progress bar at the top centre saying "updating ipod, do not disconnect" so that's all well. But once that's finished updating, if i try and search for the track on either iTunes or my iPod, it's nowhere to be seen!
    Does anyone have any ideas as to how i could solve this situaion or anything? (Other than restoring my iPod). I just want to really know if iTunes and iPod works with Windows Vista RC1 as i know there are some glitches in some programs running on Vista.
    Thanks,
    Chris.

    Ok, uninstalled 7.0, put back 6.0! if anyone has same problem, or any problems with their ipod and itunes and is using 7.0 for god sake use 6.0!! 7.0 is poo! If you can't get access to 6.0, email me: [email protected] ill happily help you out.

  • Install Photoshop 32bit AND 64bit

    hi,
    is it possible to install Photoshop 32bit and 64bit on one system?
    im currently running 64 bit, but it doesnt recognize my 32bit filters...
    if not, is there much difference in performance between the 64 and 32bit version? [btw: i am running Windows Vista 64bit Home Premium SP2]

    oh....
    lol
    sorry XD
    i see now, i have both
    and is there much difference in performance between 64 and 32 bit?

  • T500, from Vista Home 32bit to Windows 7 64bit

    Hi All,
    Wanted to know if anyone can help me with upgrading my vista home 32bit to windows 7 64bit?  My t500 shipped with vista home 32, and I have a windows 7 64bit install cd.
    my first instint is to just do a straight upgrade, pop in the windows 7  cd, and go from there.  Is that the best way?  Or should I do a clean install, format and  find drivers.  I heard Lenovo doesn't have much bloatware, and that going the upgrade route would be fine. 
    has anyone tried this yet?
    Thanks!

    You can't  upgrade a Win 32bit OS to 64bit one.
    Best to back-up all your stuff (like to a network drive on another computer), boot the computer from the CD and format all your disks when prompted where you wish to install windows.
    Most drivers will be avalible off Windows Update only specific ones like the hard drive protection drivers need be aquired from  lenovo.

  • K8N Diamond Plus & Vista RC1

    Upgraded from XP sp2 to MS Vista RC1 - upgrade seemed to go smooth.  Only real issue at this point is with the on-board audio.  It appears that it only sees two channels - additionally the audio for the tv tuner card is not working as well.  Went to the Sound Blaster site - tried their Vista beta drivers - at which point Vista could not detect any sound card.  I have not been able to find any Vista drivers for the mobo on the MSI site.  Is anyone else testing Vista out on this mobo?

    I should update my signature.  Because of the fan noise on the GT7900's - I replaced them with Zalman fans - which take up more real estate and I was no longer able to get the X-Fi card to fit in the remaining pci slot.  So I dumped the X-Fi card and went with the on-board audio.  I have tried several different drivers from Creative - I can now get the card to work albeit - only with 2-channels.  When I try to configure it - my only options are either 1 or 2 channels so I think its driver related.  I am thinking of trying a low profile sound card -which I think will fit even with the Zalman fans however, the only low profile sound cards I've been able to find so far have been on the cheap side.  The one plus with going with a low profile card is getting a game port - which the on-board audio does not have.

Maybe you are looking for

  • SpaceX Seeking Full-Time Electrical Technicians in Texas!

    Please contact Brandon Garrett at [email protected] for more information. Full job description and application can be found here.  ENGINEER THE FUTURE SpaceX is a U.S.-based advanced technology company founded by residing CEO and CTO, Elon M

  • How to Create a DVD from sliding Panels Slideshow.

    I have the latest MacBook and iLife software. I have created a 650 picture slideshow in Sliding Panels theme. It is 1.1 GB. I have tried to (1) export and (2) Create iDVD through "Share". In both cases I get the message that I do not have sufficient

  • BDC for Local FIle as Long Text

    Dear All, Developing a BDC which upload Individual Files as Text for Infotype 1002 Description so please anybody tell me how to add Local File. I have done the Recording but in that how to add Text which is taken from Local Text File. Thanks in advan

  • Outlook 2007 Calender Sync - Recurring Entries

    So my iTunes Calender Sync all works pretty much perfectly with all my Apple Devices other than one point; My past recrurring entries that I have cleared daily stay on the iPhone 4s and the iPad. These are not shown in Outlook 2007 however and it's o

  • Monitoring Multiple Streams

    Hi All A quick question I have a very large file on which I do some processing As a result of the file size I have 4 InputStreams which read in from various sections of the file in diffferent threads Is there anyway to monitor the progress of all the