Vista recovery partition

After clean installing Windows 7 on my Pavilion dv5 - Vista, I saved the "Windows.old" folder and the
"Vista recovery partition" on to an external harddrive, before deleting both on my laptop.
I never made any recovery disks, but would like to go back to Vista using the externally saved Vista partition and Windows.old folder.
How can I create recovery disks using the recovery partition / files on my external hard drive??
I do hope that there is a way to do this....
Any help would be appreciated!!;-)
THANKS

sijyb00 wrote:
See, the the thing is, I DID make the recovery cd... but it isn't working. From my understanding, the cd uses the information from the recovery partition to restore Windows? Correct me if I'm wrong. Every time I boot up the cd it detects no OS and when I click continue, it begins the installation and immediately says Installation cancelled, missing files, something like C:\win.int is missing.
So the recovery cd is not working. I called Toshiba and from what I could understand from the horrible english, was that they would charge me for another recovery cd... which I don't need, because I have one. Or send in my laptop for "repair." They said it was my hard drive. Which is complete bull**bleep**, when windows failed I ran a linux os on it perfectly fine, so it is not my hard drive.
Anyone have any ideas on how I can fix this? I have a product key for vista which I PAID for when I bought the laptop... I don't think it's fair to have to buy it over again for $100-200
No, the recovery disks don't rely on anything on the hard drive. From what you say, either you are not booting from the optical drive, or the disks indeed are faulty.
The last I knew, replacement disks were $25. See the sticky at the top of the General Discussion topic for details.
There have been a lot of reports of problems with recovery disks, so I'm a bit surprised that Toshiba won't ship you replacements at no charge. Might be worth another try, and an attempt to get to the next tech level.

Similar Messages

Tx1312AU Windows Vista Recovery partition lost

tx1312AU Windows Vista Recovery partition lost after HD crash, how to get it back or should I try Win XP? (I hate Vista already...)

sijyb00 wrote:
See, the the thing is, I DID make the recovery cd... but it isn't working. From my understanding, the cd uses the information from the recovery partition to restore Windows? Correct me if I'm wrong. Every time I boot up the cd it detects no OS and when I click continue, it begins the installation and immediately says Installation cancelled, missing files, something like C:\win.int is missing.
So the recovery cd is not working. I called Toshiba and from what I could understand from the horrible english, was that they would charge me for another recovery cd... which I don't need, because I have one. Or send in my laptop for "repair." They said it was my hard drive. Which is complete bull**bleep**, when windows failed I ran a linux os on it perfectly fine, so it is not my hard drive.
Anyone have any ideas on how I can fix this? I have a product key for vista which I PAID for when I bought the laptop... I don't think it's fair to have to buy it over again for $100-200
No, the recovery disks don't rely on anything on the hard drive. From what you say, either you are not booting from the optical drive, or the disks indeed are faulty.
The last I knew, replacement disks were $25. See the sticky at the top of the General Discussion topic for details.
There have been a lot of reports of problems with recovery disks, so I'm a bit surprised that Toshiba won't ship you replacements at no charge. Might be worth another try, and an attempt to get to the next tech level.

Windows Vista recovery partition lost - will toshiba send me discs?

Hi, something happened to my hard drive and the vista recovery partition was erased, so i cannot recover vista. I just bought this laptop 2 months ago and i paid for the OS with it, i have the code of authentication and serial number on the bottom of my laptop, will toshiba send me install discs? i also have the emails from best buy from when i purchased the laptop online.
thanks

sijyb00 wrote:
See, the the thing is, I DID make the recovery cd... but it isn't working. From my understanding, the cd uses the information from the recovery partition to restore Windows? Correct me if I'm wrong. Every time I boot up the cd it detects no OS and when I click continue, it begins the installation and immediately says Installation cancelled, missing files, something like C:\win.int is missing.
So the recovery cd is not working. I called Toshiba and from what I could understand from the horrible english, was that they would charge me for another recovery cd... which I don't need, because I have one. Or send in my laptop for "repair." They said it was my hard drive. Which is complete bull**bleep**, when windows failed I ran a linux os on it perfectly fine, so it is not my hard drive.
Anyone have any ideas on how I can fix this? I have a product key for vista which I PAID for when I bought the laptop... I don't think it's fair to have to buy it over again for $100-200
No, the recovery disks don't rely on anything on the hard drive. From what you say, either you are not booting from the optical drive, or the disks indeed are faulty.
The last I knew, replacement disks were $25. See the sticky at the top of the General Discussion topic for details.
There have been a lot of reports of problems with recovery disks, so I'm a bit surprised that Toshiba won't ship you replacements at no charge. Might be worth another try, and an attempt to get to the next tech level.

How to access recovery partition

hi,
i have a toshiba satellite L-305 S5919 laptop. i want to reinstall vista in my laptop. but i am not able to access the recovery partition. while booting it is not showing the recovery partition. but when i take the computer disk management it is showing a primary partition with 7 GB size. i suppose that is the windows vista recovery partition. can u help me in accessing that recovery partition and restoring to factory settings.
regards,
abt

Satellite L305-S5919
See the section titled Hard Drive Recovery Utilities, which begins on p. 60 of your User's Guide. .
Satellite L300 Series User's Guide
If you can't reach the recovery partition during startup, burn the recovery media.
-Jerry

How to reinstall vista in L 305 - S 5919 from recovery partition

hi,
when i take the recovery partition it shows a "system recovery option" dialogue box. but it is not showing any OS in it. so i clicked on "load drivers" which prompts me to select drivers from the installation media. there i can see my prmary hard disk with 140gb, a 35mb boot drive, 1.46gb toshiba recovery drive, none of which is helpful in selecting the driver. Can anyone help me in selecting the OS?
One more thing is that, when i take disk management from "my computer" properties, there it is showing a drive with 7gb which i am not able to access from anywhere?why is it so?
Expecting replies
with regards,
abt

thank u jerry...
but, my problem is still unsolved...
i have gone through the link u provided(http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletin.jsp?ref=EV&soid=2222431&ct=SB) and also through the userguide. My system is in the second category with 3 partitions...140GB, 1.46GB, 7.22 GB.
And so i suppose all my recovery files and images will be in the 7.22GB partition.
When i start my system i pressed on 0(zero) to go into that partition. But there is no option which provides a recovery. The options present were "select OS" and there windows vista basic is present. If i click on that then the system will boot normally, and no recovery happens. The other option being "check for memory errorrs". That also wont provide any recovery option..
please help me in resolving this problem.

Restoring Vista's MBR so F11 actually loads the recovery partition?

Hey guys, I have a Pavilion m8277c that came out of the factory with Vista 32-bit. I know from experience that by dual booting and installing another OS, either with another version of Windows (newer or older) or Linux, overwriting the MBR will cause F11 to not work in loading the recovery partition at startup (in fact, in the past I tried a Windows 7 beta and when I decided to wipe my hard drive clean some time after that, I had to use the recovery disks that I thankfully made before doing this experiment, as my recovery partition was nonfunctional). Right now I have a triple boot of Windows Vista, Windows XP, and Ubuntu Linux, with Linux's bootloader (GRUB) occupying the MBR, which could load any of the three OS's.
Now, I decided to get rid of Linux altogether and wipe my hard drive clean again (I keep all my files on an external hard drive and I don't have much software to reinstall, plus I like keeping my system as lightweight as possible). I know that I can't use the recovery partition again this time, but I was wondering, that since from now on, I'm only going to be booting a Windows OS that's older than the factory preinstalled one, I can use Vista's bootloader to select between Vista and XP. I know that since Vista was preinstalled and so the recovery disks install it first, XP has to be installed afterwards. XP's bootloader will occupy the MBR and will not recognize Vista and also will cut off the link to the recovery partition again. I've heard of this program called EasyBCD that has been updated to support XP and restore Vista's boot record (source) so I believe I could actually restore Vista's MBR without having to use the recovery disks to fix them.
I just want to know that if I were to restore Vista's bootloader by running EasyBCD, would that also fix the link to the recovery partition so that when I press F11 on bootup, the recovery partition would load? Or would I have to run my recovery disks to restore a custom MBR, or is it not possible at all to restore the recovery partition's functionality after a second OS has been installed after Vista? I could try it out since I believe my recovery disks are still functional, but I don't have much time right now for troubleshooting, so it would be better if someone else has already confirmed that it works and I could go ahead without issue.
Thanks!
(by the way, I know that Microsoft doesn't like it if we make more than one copy of a recovery disk, since they can install Windows on a blank HDD on any computer, but will copying a recovery DVD with a DVD burner allow the new set to work? I've had my old set for a while and I fear that they'll fail soon. Maybe there's a way to hack HP's recovery disk creation program so that we could make a second set?)

Making a copy of your Recovery Disks is a good idea.I have done it myself and can verify they work. I have also used EasyBCD on a dual boot machine and found it quite easy.However I don't know whether F11 for Recovery is restored.I tend to doubt it,since F11 is looking for partition 2 of 2 partitions to boot from and there are 3. It would be an interesting experiment-let me know if you try it.
Another option that usually works is using Disk Management to mark the recovery partition as active>>
1.Right-click on "Computer" icon and select manage.
2.This will launch the Microsoft Management Console.
3.On the left side of the MMC, click on "Disk Management" and it will show you all of the partitions.
4.Right-click on the "HP Recovery" partition and select "Mark as Active Partition."
5.When the warning prompt appears, select "Yes" - Reboot and it will automatically boot into the Recovery Manager (without pressing F11).
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Thinking of reloading Vista on my machine. Proper steps to use the recovery partition?

Hi, I have:
HP Pavillion DV9700 Entertainment Notebook
Windows Vista 32 SP1
I'm thinking of reloading Vista from scratch and want to make sure of the proper steps to use for the on board Recovery partition that HP put on here for me.
It is called: HP_RECOVERY (E Total Size: 12G, Free Space 1.97G
Any advice.
I may not do this, but if i can't fix my issues i will have to do this and want to know how.
This question was solved.
View Solution.

Hi,
Please use the following instructions, it will bring your machine back to day 1 (given no hardware problem):
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00809678&lc=en&cc=us&dlc=en&product=3552675&rul...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Dual booting Arch and Vista w/ recovery partition and a swap question.

I have a bit of a problem. The problem is, on a machine, you can only have 4 primary partitions. sda1 and sda2 are my Vista and Recovery partitions respectively, which eliminates two of my primary partitions already. I myself have never used logical partitions, and was wondering if any of the partitions the Beginner's Guide recommends (/, swap, /var, and /home) could be made logical, and if I even need a swap partition. Thanks in advance for your replies and suggestions.

The /boot/ directory needs to reside in a primary partition. Everything else can be in a logical partition.
Then again all you really need is / and swap.

Can I change the software in the recovery partition from Vista to Win 7?

After doing a clean install of Windows 7 in a used Tecra A9 I just bought, I would like to replace the factory installed Vista Business software within the recovery partition with Win 7 code so as to be able to boot Win 7 in that partition in an emergency. How can I do that, and are there any serious downsides to getting rid of the "factory installed stuff"? Thanks in advance.

In the Creative Cloud Application you can change in Preferences the App language. Then you can download and install additional the other language.
With Photoshop you can now go to Preferences > User Interface and switch between all installed and available languages.

Remove Recovery Partition from Vista T61

Yes, I want to remove the entire partiton so that I can ghost the image with ghost 11. As it is now ghost 11 fails on the restore once it hits the recovery partition. Our customers don't need the R&R partition so getting rid of it would be the easiest way around this in my experience. HP has a simple option to get rid of this but I see no such option on the T61.
Thanks

Yes. I think this to be true. I no longer have the back up restore capability on my machine but it works just fine. I used FDISK and reformatted the drive and everything is fine. I got a virus that I think corrupted my boot information. That is how I had to learn so much about bringing this nice machine back up to speed.
ThinkPad T23, 2647 HU8, Based on 2647-8RU: PIII-M 1.20GHz (512KB), 512MB RAM, 40.0GB HDD, 14.1 XGA(1024x768) TFT LCD, 8x8x24x/8x CDRW/DVD, Modem(MPCI), Ethernet(CDC), WinXP Home, Linksys Wireless B adapter.

How can I see the files in the Recovery partition folders? Explorer won't let me.

I am preparing to do a clean install of Windows 7 onto a hard drive that shipped with Vista Home and the Recovery partition. I want to reuse the recovery tools along with Windows 7 in the recovery partition. Windows Explorer won't display the contents of the recovery folders. How can I overcome this?
Thanks,
Luke

Force it into recovery mode to restore it as explained here: If you can't update or restore your iPhone, iPad, or iPod touch. Sometimes you have to do this more than once to be successful. After restoring, you'll have to restore an existing backup, if you have one.

Equium will not boot - how to access Recovery partition?

Hi, my sister has a 2008 Equium A200-1V0 with Vista 32-bit which will not boot (probably due to virus rootkit damage). It loads the BIOS but then goes straight to black screen with flashing cursor.
F8 does not work.
F2 goes to Phoenix TrustedCore Setup utility. The Toshiba hard drive and CD-ROM drive are listed in Main and Boot in the correct order.
Using F12 I can get it to boot from a Win7 64-bit repair disc I burned using my laptop.
However, this does not recognise the OS nor any image or restore points (because it is 64-bit) but it will load Command Prompt.
In *Command Prompt*, I can start Notepad and when I click File/ Open and double click on Computer it shows 4 Hard drives as follows:
Local Disk (C:)
Data (D:) 42 GB free of 54.5 GB
WinRE (E:) 1.11 GB free of 1.46 GB
Boot (X:) 29.0 MB free of 31.5 MB (which is used by the Repair disc)
So the C: drive is listed but without capacity.
*CHKDSK*
chkdsk c: /r and press return
"The type of the file system is NTFS.
Unable to determine volume version and state. CHKDSK aborted.
Failed to transfer logged messages to the event log with status 50.
*Running TESTDISK*
Analysis:
Partition Start End Size in Sectors
1 P Windows RE(store) 0 32 33 191 89 26 3072000
2 * HPFS - NTFS 191 89 27 7477 118 1 117051392
3 P HPFS - NTFS 7477 118 2 14592 190 62 114307072 (data)
* = Primary bootable
When doing Quick Search and then P - list files, of the second partition it reports:
"Can't open filesystem. Filesystem seems damaged."
So what I would like to do is boot up from Windows Restore on the E drive.
My question is to any Toshiba experts: When F8 does not work how do I use the recovery partition???
Laptop is:
Part Number : PSAF5E-002005KS
Key Features
- Intel Pentium Dual-Core Processor T2310
- Genuine Windows Vista Home Premium Edition
- DVD Super Multi (Double Layer) drive
- 2,048 (1,024 + 1,024) MB RAM (667 MHz)
- 15.4 " WXGA TFT display 1,280 x 800

*UPDATE*:
I have borrowed a genuine Windows Vista Home Premium 32-bit dvd and booted up with that.
Clicked on "Repair your Computer"
Then it goes striaght to System recovery Options but no Operating System is shown. Click Next.
Then:
"Choose a Recovery Tool.
Operating system: Unknown on (Unknown) Local Disk"
*Startup Repair*
This takes 1 second.
Root cause found
System volume on disk is corrupt.
*System Restore*
"X - To Perform an offline System Restore, you must specify which Windows installation you would like to restore.
For example, if the installation located in "C:\Windows" should be restored enter the following command:
rstrui.exe /OFFLINE:C:\Windows "
*Windows Complete PC Restore*
" No valid backup locations could be found.
Windows cannot find a backup on the hard disks or DVDs on this computer. Attach the correct hard disks or insert the last backup DVD and then start the restore process again. "
Windows Memory Diagnostic Tool
Windows cannot check for memory problems...[snip]
*Command Prompt*
This is working fine.
CHKSDK C:
The type of file system is NTFS.
Unable to determine volume version and state. CHKDSK aborted.
The HDD is 120 GB and is split by Toshiba into 3 partitions.
C:\ drive (56GB) is bootable with Windows - this is corrupted.
D:\ drive (55 GB) has all Data - fully accessible
E:\ drive is CDROM
F:\ drive (1.46 GB) is the WinRE recovery partition - this is fully accessible.
So my question still remains: can I recover my Toshiba laptop using this recovery partition?
PLEASE NOTE: as mentioned above, pressing F8 during boot has no effect and therefore Safe Mode cannot be accessed.

Upgrade to Win 7 and Vista Recovery CD

I am currently running Windows Vista Ultimate 32-bit on a T61p, and am going to do a clean install of Windows 7 64-bit (onto a new hard drive).
In case the Windows 7 install is a complete failure, etc. I would like to be able to reinstall Windows Vista Ultimate as it was factory installed.
Will   [ThinkVantage --> Create Recovery Media] Recovery CDs allow a clean installation of the Windows Vista version that came with my Thinkpad originally? In other words, is the Recovery CD all that I will need in order to be able to install Vista (even without the service partition) ?
Thanks
Specs:
System
Manufacturer
LENOVO
Model
6459CTO
Total amount of system memory
3.00 GB RAM
System type
32-bit operating system
Number of processor cores
2
64-bit capable
Yes
Storage
Total size of hard disk(s)
87 GB
Disk partition (C
19 GB Free (87 GB Total)
Media drive (D
CD/DVD
Media drive (F
CD/DVDCD/DVD
Graphics
Display adapter type
NVIDIA Quadro FX 570M
Total available graphics memory
1527 MB
      Dedicated graphics memory
256 MB
      Dedicated system memory
0 MB
      Shared system memory
1271 MB
Display adapter driver version
7.15.11.7693
Primary monitor resolution
1680x1050
DirectX version
DirectX 10

The recovery media (select recovery discs should be 3 dvds) will allow you to restore any hdd to the factory condition, in other words it will be like when just got the laptop with the OS/drivers and recovery partition installed.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Need help restoring dell factory image from hidden recovery partition

Hello All.
My Dell XPS M1530 Model PP28L Service Tag <ADMIN NOTE: Service tag removed per privacy policy> Windows Vista Home 32 bit crashed the other day. Windows Vista would not load either in normal or safe mode. It kept going into a endless loop. Tried F8 and repair no go. Then hooked this drive as a slave on another system and ran chkdsk.exe which deleted several attribute records. The drive now boots into Vista normal and safemode fine.
I would now like to troubleshoot how to run the factory restore using Dell restore feature.
I've tried Ctrl-F11 but no menu comes at POST. I've also tried the F8 during the POST and after selecting Repair My Computer the laptop continues right into Windows Vista and no System Recovery Option displays. Can I run the Dell factory restore from the hidden recovery image partition ? If YES then what software do I need in order to this ? Thanks
As a slave hooked to a Windows 7 computer I cannot see the hidden recovery partition in Disk Management. Same when the drive is booted into Vista safemode.
How can I restore Vista to Dell factory settings from the hidden recovery partition ? Please see the picture of the disk management snapshot which I have taken when booted into Vista.
Thanks
Victor

Windows Vista is obsolete (no Office 2013, IE10/11 or drivers for new hardware support and no Digital Distribution).
I'd advise installing a SSD in the system and installing Windows 10 Insider 10074 which is a relatively stable build. Windows 7 and Windows 8.1 users are eligible for a free upgrade to Windows 10 RTM. Windows Vista users aren't eligible for the free upgrade but theres likely going to be a free upgrade from Windows 10 Insider to Windows 10 RTM or at least a significant discount.
Use 64 Bit and note this is a MBR Legacy BIOS (non-UEFI):
http://dellwindowsreinstallationguide.com/download-microsoft-windows-and-office/download-microsoft-windows/download-windows-10-technical-preview-iso/
The drivers should all be installed automatically, if not use these:
http://dellwindowsreinstallationguide.com/driver-sets/xps-laptops/xps-m1530-windows-7-64-bit/

Recovery partition and Recovery disk doesn't work

I have HP Pavilion dv6000 Windows Vista Home Premium with Recovery Partition at drive D:\. Here is my problem. I want to use the System Recovery to put my PC to its default setting, I have use Recovery Manager, but System Recovery does not work. I have also use a recovery disk, but nothing works. Using the Recovery disk, while the recovery is in process formatting the windows partition, and the process reaches 33%, a windows error pop-out (Error: ox4001100200001005). I need help because my laptop is unstable and I cannot work.
Yours truely,
colorlime

Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Vista recovery partition

Similar Messages

Maybe you are looking for