Vista SP1 problem

Well this weekend I got the chance to run Lenovo's "One Key Recovery" software through it's paces.
I tried installing SP1 for Vista twice.  Both times it failed during the last step.
Anyone else having bad luck with SP1?
SeaSteve

If you have not already go to start , all programs, ThinkVantage, and then System Update and download the latest version of R and R which is Vista SP1 Compliant.
Proud supporter of the Toronto Maple Leafs Hockey Club

Similar Messages

  • Vista SP1 problem on Satellite A210

    Hello,
    I just installed the Vista SP1 and since that my notebook doesn't reboot or shut down properly. If I choose "shutdown" the shutdown-screen appears, but the notebook does not shut down. Then the monitor turns black and that's it.
    Did enyone encounter the same problem after installing SP1? I deinstalled the SP1 and since that everything works fine again.
    By the way, I can't download any driver updates for my Satellite A210 since this evening. When I choose the options in the menu and klick search the website says: no drivers found!
    Alpapone

    I agree with you in the fact, that testing takes its time. Most of the drivers for my A210 are from around summer 2007.
    I don't know when the Vista SP1 testing phase started, but I think Toshiba had plenty of time to adjust drivers, as many other manufacturers did.
    So why not Toshiba?
    I got the SP1 via Windows Update and thought that everything would be fine.
    Yes, I know, the "early adopters" ;-)!
    So the SP1 was installed...and...the problems occurred!
    So I went on the Toshiba website - no information (as they did with the bandwidth problems in the drivers download section in January and February).
    In the drivers section: no drivers. How comes, that a companies don't support SP1 and its nowhere announced?
    I don't care, if Toshiba updates the drivers once in ten years, as long as everything works fine.

  • Problem With Conexant HDAudio After Installing x86 Vista SP1

    I didn't want to start a new thread, but it seems my problem is very unique.
    When first installing Vista x86 my Speakers/Headphones worked great. After Vista SP1 installed, my Speakers/Headphones went silent yet the driver was still there and functioning properly. I uninstalled the driver, and let Windows auto-install another driver. (No Rollback was available) I was able to get sound from my Speakers. Speakers are the only thing that work whether I plug into the headphone jack or not. 
    While plugged to the headphone jack I test the Headphone device in Playback Devices and get nothing through the headphones.
    HP support's drivers only mute my speakers while making my headphone device in playback disappear. Same with updating the driver.
    I like to use this as a TV computer and would like sound from the TV via the headphone jack. 
    I have searched EVERYWHERE on the internet and found no resolution. Any help would be appreciated.
    Hp pavilion dv6748us
    Conexant Audio
    Hardware IDs:
    HDAUDIO\FUNC_01&VEN_14F1&DEV_5051&SUBSYS_103C30CF&REV_1000
    HDAUDIO\FUNC_01&VEN_14F1&DEV_5051&SUBSYS_103C30CF
    This question was solved.
    View Solution.

    Glad to here it working
    Not sure on your model but on dv2000 models I worked on I was able to replace the headset jack board by removing all screws from lower casing, removing rear button panel then just lift front palm rest & have easy'ish access to jack board 2 screws & ribbon connector.
    Hope your jack board lasts a while ...
    Like my post? Click Kudos (thumb+) to show appreciation.

  • MacBook Pro sleep problems with Vista SP1

    Has anyone faced sleep problems on a MacBook Pro after installing Vista SP1?
    I run Boot Camp 2.0 with the latest update from Apple.
    IDT finally issued a compatible Vista driver for my Sigmatel audio.
    I was very happy for the first time running Vista on my Apple when I had the stupid idea to upgrade to SP1.
    After days of troubleshooting with Windows support it is obvious that SP1 and my MacBook Pro are incompatible for some obscure reasons. The latest time I tried SP1 was through Windows Update, which means that Windows detected no compatibility issues, such as drivers.
    I suspect Apple-in-sight driver without any evidence, just a hint.
    Any ideas?
    Thanks

    Hibernation seems iffy. Have you tried disabling hibernation? and when you say sleep, what happens? won't wake or what?
    Normally I don't recommend resetting NVRAM or SMU but for sleep you might want to.
    And yes, trying to rule out why can be difficult. But I would not blame SP1. Maybe BC 2.1.
    Do you have a book dealing with Vista? or looked for articles or forums that deal with Vista? There is one for Vista64 - assume you have 32-bit though. Google is often best way to find things in Apple discussions or knowledge base, too.
    http://www.google.com/search?ie=utf8&oe=utf8&q=Vista+sleep

  • T61P Vista SP1 3GB/4GB Problem

    Hi !
    I've memory 3GB/4GB problem with T61P. I've install Vista SP1 (32B), problem still exist. Any hope ?
    Have a nice day !
    B.

    Do you mean your OS won't recognise more that 3Gb?  That is the limit of a 32 bit OS (Vista).  Unless you get Windows 64 bit OS, you're stuck with 3Gb.
    Keith
    Formerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891
    Currently T420 4177-CTO, T430 2347-A54, T430 2349-L64, T430 2347-UN9, T430 2342-CTR, Ideapad K1, H520S 2561-1LU

  • T60P - problems installing Vista SP1

    I own a T60P with pre installed vista business. When I try to install a vista sp1 it gives me the following massage 0x800703ee and stop installation process. As well the ThinkVantage system fails to install and update module (32 bit) to vista through the download center- are2 problems connected? Can anyone help me solve it? Thanks

    Make sure your system is up to date by using System Update.
    T60: 6371-CTO, VISTA Home Premium+SP1, 2GB....R51: 1836-Q4U,XP,1GB...600...755CD

  • Vista SP1 + VGA adapter on Macbook Pro

    Problem: Attach a vga monitor via a dvi to vga adapter, the vga screen is black.
    Tests: Attached a DVI monitor (Mac 20" screen) - passed.
    Tried another dvi to vga adapter - failed.
    Tried another VGA based monitor - failed.
    Vista does chime when the dvi to vga adapter is plugged in and I'm able to see a second display on the control panel and select a resolution. The display does work when I've booted in mac os x, or while vista is booting with the 640x480 startup screen. I've used another macbook pro 15" with the same setup and it works... so I would have to assume this is a problem with the hardware.
    Setup: Boot Camp 2.1 with Vista SP1
    Model name: MacBook Pro 15"
    Model identifier: MacBookPro1,1
    Processor name: Intel Core Duo
    Processor speed: 2.16 ghz
    Number of processors: 1
    Total Number of Cores: 2
    L2 Cache: 2 MB
    Memory: 1 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MBP11.0055.B08
    SMC Version: 1.2f10
    Does anyone have any suggestions for this issue?
    Thanks-
    Bruce

    Hi
    i did what you said and tried with other resolution/refresh rate combinations, also with anoter external monitor (and vga cable) but its still the same: monitor is detected but there's no signal.
    Now I will try to chek if the adapter works on other pc and monitor.
    Thanks
    (anyway it was the firs time i connect this mac to an external monitor)

  • Safari 3.04 Beta and Windows Vista SP1 Beta

    I recently had to re-install my system because of a hardware problem. After I installed Vista Ultimate I then installed Vista Ultimate SP1 Beta.
    Previously I had just Windows Vista installed without SP1 and Safari worked. Now that I have installed SP1 Beta, Safari will not load. I get an immediate error message that Safari has stopped working.
    Has anyone else encountered this problem. If so, can it be fixed?
    Thanks.
    Roy

    Exactly the same issue here. All was working fine until Vista SP1 beta was installed. I updated from 3.03 to 3.04 but still no go. Also tried uninstalling then reinstalling to no avail.
    Apart from this have not seen any other issues relating to Vista SP1 Beta.

  • PC SUITE 6.86.9.3 Vista SP1 Crash

    Hello I really like the new look of the PC Suite, but I have a problem ... I recently installed SP1 for Vista. I have Nokia N70 ME and its was paired with my Sony VAIO VGN-CR190 over bluetooth. I had no problems with the previous version of PC Suite (6.84) and Vista SP1. My bluetooth stack is Toshiba v. 5.10.04(SO).
    The problem comes when I pair my phone over bluetooth and I try to access it I am getting an error. Here is the log from the Windows Event Viewer:
    Fault bucket 701006833, type 1
    Event Name: APPCRASH
    Response: None
    Cab Id: 0
    Problem signature:
    P1: NclToBTSrv.exe
    P2: 7.0.2.0
    P3: 47be61ca
    P4: ntdll.dll
    P5: 6.0.6001.18000
    P6: 4791a7a6
    P7: c0000005
    P8: 0003ed26
    P9:
    P10:
    Attached files:
    C:\Users\Denis\AppData\Local\Temp\WER9FE9.tmp.version.txt
    These files may be available here:
    C:\Users\Denis\AppData\Local\Microsoft\Windows\WER\ReportArchive\Report0af3c3ec
    Any help will be appreciated. I'm not in a hurry because I have a card reader, but sometimes I'm too lazy to take the card out just to trnsfer one picture.
    Faulting application NclToBTSrv.exe, version 7.0.2.0, time stamp 0x47be61ca, faulting module ntdll.dll, version 6.0.6001.18000, time stamp 0x4791a7a6, exception code 0xc0000005, fault offset 0x0003ed26, process id 0x14f4, application start time 0x01c8c49a95fe99b2.
    Message Edited by denis4o on 02-Jun-2008 01:50 PM
    Message Edited by denis4o on 02-Jun-2008 01:51 PM

    I have the same problem, and the funny thing is, the Bluetooth dongle works fine with my old Sony Ericson phone. So the problem must be the Nokia Suite?

  • TV tuner cannot be used in Vista SP1 - Qosmio G

    Hi
    I have installed the Vista SP1, and when I try to see TV in media center, it says that "a required windows media center component is missing" or something like that.
    When I try to configure it in the settings, it says that the hardware was not detected, and I have it installed, I can see that in the device manager.
    Does some one have the same problem or have any ideas about how can I solve this?
    Thanks,
    Rafael

    Hi
    I have googled a little bit to find out what this error message could mean but it looks like this error is not specific.
    This mean that different reasons could causes this issue
    In you case I presume that the SP1 is not fully compatible with the TV tuner driver or the TV tuner does not work and could be recognized by MCE due to the tuner driver malfunction.
    Sp my first advice would be the Tv tuner reinstallation.
    Firstly remove the old driver from the device manager and then after a short reboot install the new downloaded driver.
    Good luck

  • Treo Pro will not sync with Vista SP1

    I'm really hoping somebody can help me here.  I just replaced my aging 700p with the long-awaited Treo Pro (Sprint).  I've actually been looking forward to getting fully Windows-based, since my 700p syncing was routinely problematic - always having to do workarounds and plug in the cord just the right way, etc...
     Let me try to give you the flow so far.
    I have Vista SP1
    I get Treo Pro
    I plug Treo Pro into Vista, SP!, all ready to sync up my Outlook 2007 data.
    Treo Pro fires up a very impressive looking installation routine.
    Routine seemingly works fine - getting me to the point where you unplug and reconnect your device to do your first sync
    I reconnect, and hear the Windows "USB connect" sound, then.... nothing.
    I open WMDC and it says "not connected"
    I open "USB to PC" on the Treo, and uncheck the "advanced networking" box as suggested by some other posts.
    Windows sees the difference and installs a couple of other drivers.
    Windows connects, gives me the "USB connect" sound, and WMDC says "not connected"
    The Treo appears to attempt a sync, but finishes with a message "To synchronize this device, you must install ActiveSync 4.5 or newer on your desktop computer. "
         HUH?  ActiveSync only works with XP - of course I can't install that!
    By the way, I tried the same thing with my Vista SP1 laptop. Same exact results.
    Also, at no time have I seen the WMDC icon in the tray area. (I remember having a Nino way back when, and the ActiveSync icon was down there)
    I thought this was supposed to be easy - Windows PC, Windows device.  Piece of cake, right?  Not so.  If I cannot get this thing to connect, I'm getting a Centro! (not my first choice....)
    A thought... any chance this could have to do with having Palm Hotsync still installed (from my Treo 700p)?
    Any help would be GREATLY appreciated!
    Post relates to: Treo Pro T850 (Sprint)
    Message Edited by finalewiz on 03-29-2009 09:02 PM

    On Windows XP, having HotSync installed didn't interference with using ActiveSync with a Treo 800w. This is not exactly the same as your setup, but close enough that I think HotSync is not likely to be the problem.
    How did you install WMDC? The downloadable User Guide (PDF pp44-46) refers to running the PC Setup program. Did that part go as expected?
    I don't use Vista, so I'm not familiar with the additional complications that might be involved...
    Post relates to: Treo 800w (Sprint)

  • Tv @nywhere PRO and vista SP1

    hello
    my media center doesn't work with VISTA SP1 and a TV@nywhere pro ,if i come back to vista standart,  it works again.
    simply the media center starts, but when i select tv for source it remains in loading with the logo on screen.
    think i need a patch  , like for the PLUS version.
    help me thanks

    Quote from: Covex on 07-January-09, 18:19:49
    Unfortunately, I cannot uninstall sp1, so do anybody know a hotfix for pro cards and vista sp1?
    As you can see you don't need fix:
    Quote from: saeemon on 28-December-08, 17:45:12
    hello
    i tried to reinstall vista sp1 for the third time and now it works
    i dont know what was the problem , now i happy

  • QT 7.5 update - Apple S/W/U license window corrupt thru Vista(SP1)

    FYI (6/10/08)
    Attempted to use Apple Software Update on a Vista(SP1) machine to get QT 7.5 update and at 'License' window...corrupt(squares/symbols) characters are displayed. Appears to be displayed in a foreign language set. No problem w/Vista prior interface w/Apple S/W/U software.
    Solution:
    Went to http://www.apple.com/quicktime/download/
    and downloaded the QT 7.5 update from there. The 'License' window appeared in English as expected. Install overwrite worked fine and all appears normal.
    So the d/l via Apple S/W/U might have a glitch with Vista(SP1). Note: On a separate XP(SP3) machine the QT 7.5 update had no problem at the 'License' window step. Used same DSL connection for both(XP & Vista) interfaces w/Apple S/W/U software.
    Maybe something to do w/the Apple S/W/U software not acting nicely w/Vista SP1? Just guessing here...any other Vista machines(non SP1) seeing this same glitch?

    Okay, have heard back from North Carolina re:
    Attempted to use Apple Software Update on a Vista(SP1) machine to get QT 7.5 update and at 'License' window...corrupt(squares/symbols) characters are displayed. Appears to be displayed in a foreign language set. No problem w/Vista prior interface w/Apple S/W/U software.
    Helen didn't see this when doing the standalone QT 7.5 update via ASU 2.1.0.110 on the Vista SP1 box. (Uninstalled existing iTunes and QuickTime on the PC, ran ASU, and then ran the QT 7.5 install available in ASU 2.1.0.110.)
    Plausibly, it might be an issue with the ASU on your Vista box (transitory or otherwise). But the possibility of a bug that is manifesting just on some systems certainly hasn't been ruled out by Helen's experience. It'll be interesting to see if we get any other reports one way or the other on the topic.

  • Qosmio G30: Conflict between Sigmatel audio driver and Vista SP1

    Hello,
    I have a Qosmio G30 PQG32E notebook and can't upgrade to Vista SP1 because the Sigmatel driver (6.10.5462.0) is conflicting with the service pack.
    As some of you might know, Sigmatel no longer exists and IDT who bought them is as good as non-existent, saying to contact the OEM directly for updated drivers.
    Is there any plan to upgrade the audio driver ?
    There are huge memory leaks in my case from the audio driver.
    When using Photoshop or Premiere Pro, the audiodg.exe proccess consumes 800MB and more after one hour of continuous work.
    I am hoping for an updated more stable driver, and more stability from SP1.
    Am I a dreamer?

    Have your problems started after SP1 installation? Just for info: at the moment Toshiba does not support SP1. I really believe that you have some troubles and because of that I still wait with SP1 installation.
    You are right about Qosmio. It costs a lot of money but using delivered recovery image installation you will not have any problem. About memory and how much resources Vista needs you can read everywhere. Even if you close some application RAM will still be occupied with different information. If you start the same application again you will see that application starts second time much faster.
    It is Vista!!!
    You have really nice notebook and you should upgrade RAM to maximum level. I am pretty the notebook will runs much better and of course faster. For such notebook 2 GB for Vista is really the minimum.

  • Vista SP1 will not install

    I get a quick flash of the Command Prompt screen but the install will not go any farther. This is on a brand new MacBook. Both Mac and Windows have had all of the new updates before trying to update Vista SP1. I presume since no updates are available that all drivers are current.

    I couldn't tell if you are booting from the new Vista SP1 DVD, or trying to use standalone update, or Windows Update.
    Some people didn't have enough free space. And before applying I would run a chkdsk and sfc along with Vista backups (either WinClone or built-in backup in Ultimate/Business edition).
    The boot problem with SP1 seems like a new wrinkle in EFI firmware on new Macs.
    http://discussions.apple.com/thread.jspa?threadID=1464025
    I've done SP1 update a couple times. Once with the 700MB download update, and once with Windows Update. Normally it updates in stages, preparing, and configuring and applying. It also needs free temp space to configure and update which you regain back afterward (less about 1-2GB).
    http://windowshelp.microsoft.com/windows/en-us/search.aspx?=&qu=Vista+Recovery

Maybe you are looking for