Vista SP2 BUGCode error blue screen dump

I haven't had a days problem with my PC for almost 2 years.  Keep up with updates routinely.  Installed SP2 and now get blue screen dumps.
Been working with Microsoft for a week.  Have isolated a USB Generic HUB driver if disabled I do not dump.  Driver appears to be related to internal fingerprint reader that uses digital persona sw.
tried updating the driver an no good.  Any ideas?
Apparently there is an issue with HP's and this upgrade on PC using Nvidia controllers.  Suppose to have an unpublished hotfix but the file was empty.
Since it is related to Digital Persona (i think) microsoft won't be able to help anymore.
JP5

Benn working with Microsoft support for free they have put in over 20 hours on this.  We have traced ti to the finger print reader from authen Tec and my HP all in one C7280.  If the reader is enabled and you plug in the printer it will crash within 20".  If I disable the reader I can plug in the printer,
Prior to SP2 it ran fine.  Microsoft is reluctant to remove SP2 and I am not happy with HP as their software updater is te one that told me to install it and they want to charge for telephone support even though it is apparant it is a driver from their 3rd party software.  they said to update bios which I did and it did nothing.
JP5

Similar Messages

  • Unmountable boot volume error blue screen

    I have a toshibia laptop that has crashed, I am eventually getting the unmountable_boot_volume error blue screen, the recovery disks that i ordered will not work, just disk 1 loads windows file then goes to a black screen with the cursor pointer, computer repair does the same thing, os is windows 7 satellite c655d-s5120 64 bit the bios does show the hard drive name and the boot log is showing the last driver loaded is windows/system 32/drivers/atipcie.sys, can I order a recovery for the windows 7 or is there any other ideas to fix this?not sure why this is happening

    If you've already ordered a set of recovery discs, you probably don't need to order another one. While it's possible that the discs are bad (and maybe you should call customer support just to see what they say), it's also possible that you have a hardware failure of some sort.
    - Peter

  • STOP ERROR - Blue Screen - on Lap Top - Fixed, tear1, support rocks!!!!!!

    New Iphone, and new laptop, installed itunes Noprob,
    Hooked Iphone to usb laptop found Iphone and installed and activated Noprob,All systems go, I am loving it.
    I then ejected my Iphone and hooked up my Ipod to transfer purchesed music and shows transfered Noprob, so I eject my Ipod to hook up my Iphone to put my purchesed music on it.
    THATS when it happened.
    STOP ERROR- Blue screen,cpu restarted on its own.
    I deleted itunes and I deleted camradrives, printer drivers.
    I tried allmost everything and still got the same blue screen.
    To make a long story shorter I called apple talked to the (now this is important) Iphone/Itunes department they are seperate but have a div. that works as one but you have to ask for the department that takes care of both or you will talk to both or 3 or 4 other dept.
    Tear 1 Support had me do a soft reset on my phone it did not work so I backed up my phone # and they showed me how to do a compleate reset and it worked.
    I have been Error and blue screen free for 2 days and I feel very posative about the future with my relationship between my cpu and my phone
    Thank you for your time.
    I hope I help some one I found no relief here with my problem but its a great resource for information
    GOD BLESS TEAR 1 SUPPORT YOUR TEAM ROCK'S
    Pro-Iceman
    Anacotes,Wa

    You don't need to upgrade your software.  But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
    If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3.  It's easy to use in DW CS4, 5, 6 or CC.  More importantly, it's bullet proof and works in all devices. 
    Pop-Menu  Magic3 by PVII (commercial DW extension)
    http://www.projectseven.com/products/menusystems/pmm3/index.htm
    If you don't have a budget to work with, you can roll your own menus with jQuery plugins.  A bit more effort on your part, but they perform better than Spry.
    jQuery Superfish
    http://users.tpg.com.au/j_birch/plugins/superfish/
    jQuery MegaMenu2
    DEMO:
    http://www.geektantra.com/projects/jquery-megamenu-2/
    DOWNLOAD:
    http://code.google.com/p/jquery-megamenu/
    Nancy O.

  • Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

    Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
    play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

    Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1

  • Error blue screen with KM2M Combo Board

    The setup of my PC is:
    KM2M Combo L
    Athlon 2200+
    1x128 Mb DDR PC 2100
    S3 graphics pro savage DDR (on board, currently 16M)
    AC97 audio controller (on board)
    HDD Samsung 6 G
    CD 52x
    Floppy drive
    Mouse, keyboard PS/2
    Windows XP Home version 2002
    The problem is this:
    Once the operative system is installed, the pc works correctly. When the drivers on the board drivers cd are installed, the system crash often, especially playing a movie or running a game, and a error blue screen are shown.
    Please somebody tell me how can I solve this fastidious problem, or at less, what the failure could be.
    Thanks a lot!

    What brand of memory ? Perhaps 128 Mb. of memory is too poor, since your problems happens when playing videos or games. Borrow a 256 Mb. module and see wha happens.-  8)

  • Blue screen error /Blue screen of death(Your pc ran into a problem and needs to be restart)

    Hello, 
            About 15 days ago,my laptop is showing blue screen errors,really this is very frustrating.
             I use a lenovo laptop,
    Processor
    Core i3 (3rd Generation)
    System Memory
    4 GB DDR3
    HDD Capacity
    320 GB
    Operating System
    Windows 8
    System Architecture
    64-bit
    Dedicated Graphics Memory Type
    DDR3
    Dedicated Graphics Memory Capacity
    1 GB
    Graphic Processor
    NVIDIA GeForce 610M
    i have tried methods like , 1) un installing the anti virus (Quick Heal Total Security) and re installing again
                                              2)Turning Firewall on and off. Because someon said that this could be a cause of Anti virus..
                                              3)Optiminzing the disk drives...
                                              4)i have used a software called "Blue screen view".which shows all the daetails of blue screen errors
    and all dumps files.And also i deleted all the dump files and folder , but also the problem persists.
                                             5)in Google search someone told that to update all the drivers. i have also done that
                                             6)i have uninstalled and reinstalled the graphics driver.
      So, i have tried all the methods given online,but i didnt get any help from it.
    So please help me . I am tired of all this 
    *Sorry for poor english

    Without the Minidump Files to help us isolate the cause of the errors you are experiencing there is no way to provide assistance specific to your situation.
    One of the most common causes of errors are drivers. You have already mentioned that you have upgraded your graphics driver to the latest version provided by the manufacturer, updating other drivers like network, chipset, and storage controllers is a good
    next step. If no driver updates resolve your issue and you have already looked into security software as a possible cause, another direction to take would be to review your hardware for possible failures. You can diagnose your memory by
    entering “Diagnose your computer’s memory problems” at the start screen and selecting the result. You can also diagnose your storage devices by
    right clicking the storage device in File Explorer, selecting properties, and selecting Error Checking.
    Brandon
    Windows Outreach Team- IT Pro
    The Springboard Series on TechNet

  • Bootcamp and Vista ultimate 32 bit blue screen

    Hello all. I just purchased my Macbook Pro (late 2008) model last night and I also did a memory upgrade from 2Gb of DDR3 to 4Gb of DDR3. And its was working great..
    So i've had a macbook before but never a macbook pro. So i ran the BOOTCAMP Assistant and went through the stages of partitioning and inserting my Windows Vista Ultimate Disc. It goes through the install process and once its finished installing, it restarts and I get to where Vista says "Now configuring your system, please wait....." or something of the sort.. Anyway then it flashes a blue screen (blue screen of death) and then it reboots my Macbook.
    I'm lost. I removed the partition and tried again with different versions of Vista: HomePremium, Business, and Basic, still nothing. I also tried different size partitions, still nothing. Any help will sure be appreciated. Thanks in advance

    George Frazee wrote:
    On my whitebook I had Vista Business running without error on a 20GB partition.
    I am sure that it could be done. However, the chances of problems are very high. Microsoft recommends at least 40 GB.
    http://www.microsoft.com/windows/windows-vista/get/system-requirements.aspx

  • Nivvglk.sys blue screen dump on new computer

    I replaced a broken computer with a Supermicro X8ST3 w/RAID5 running XP 5.01.2600 servicepak 3.  On this new computer I get nivvglk.sys dump stop on 2nd or 3rd run after reboot.  Have many other computers that work fine on this software installation suite.  VXI is connected with 1394.  Resman runs ok.  There is a 1394 hangup is inside VXITech vtvmSmip_init() -> viMoveOut16() (initial clearing TraceRAM).  Any ideas?

    Hi,
    Are the other working computers the same make/model and did you use an image to install this software suite? Can you elaborate on your “the 2 or 3 runs after reboot” comment? Is there a program that you are running that is causing this blue screen that will run 2 or 3 times without error? Would you be able to send in a dump file if needed?
    Matt
    Applications Engineer
    National Instruments

  • Video Hardware Error Blue Screen

    This started about a week ago, first day was July 23 when I first got the problem. I logged out of WoW and my computer blue screened saying a Video Hardware Error. I have had the error come up several times but without a blue screen of death but now again just maybe 15 minutes prior to me posting this I got the blue screen of death again when I log out of WoW. I don't know if it happens with other games, I don't play much else at the moment on the computer, I usually play other games from my consoles so I will try others on this comp over the next few days or so and see what happens but I have had this computer for 3-4 months now, I have had Windows Vista Ultimate x64 installed right since day 1 as well and I have not had this problem until recently and I don't know why. I can't update my video drivers as Nvidia says it won't allow me to update it can only be updated through my laptops manufacturer. I have a MacBook Pro 2.5Ghz, 4GB ram, 512MB GeForce 8600M. Why is this all of a sudden happening? The problem reports show for the 2 BSOD's shut down unexpectidely with:
    Problem signature
    Problem Event Name: BlueScreen
    OS Version: 6.0.6001.2.1.0.256.1
    Locale ID: 4105
    Files that help describe the problem (some files may no longer be available)
    Mini073008-01.dmp
    sysdata.xml
    Version.txt
    View a temporary copy of these files
    Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
    Extra information about the problem
    BCCode: 10e
    BCP1: 0000000000000002
    BCP2: 0000000000000001
    BCP3: 0000000000000000
    BCP4: 0000000000000000
    OS Version: 606001
    Service Pack: 1_0
    Product: 256_1
    *The other cases being the Video Hardware Error only on 4 days, July 23, 26, 27 and 29 show this:
    Description
    A problem with your video hardware caused Windows to stop working correctly.
    Problem signature
    Problem Event Name: LiveKernelEvent
    OS Version: 6.0.6001.2.1.0.256.1
    Locale ID: 4105
    Files that help describe the problem
    WD-20080729-0236.dmp
    sysdata.xml
    Version.txt
    View a temporary copy of these files
    Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
    Extra information about the problem
    BCCode: 117
    BCP1: FFFFFA80054CE010
    BCP2: FFFFFA6002410EB0
    BCP3: 0000000000000000
    BCP4: 0000000000000000
    OS Version: 606001
    Service Pack: 1_0
    Product: 256_1
    Is this my video card is fried and the laptop needs to be repaired or is this just a driver issue or what?
    Message was edited by: NightHawk29
    Message was edited by: NightHawk29
    Message was edited by: NightHawk29

    check if there is any upgraded driver version available. If you have the latest version, report to Sony. There is nothing you can do to fix a driver crash. 
    Is there any reason you are not using DirectShow? VFW was made for 16 bit Windows and you got a device that supports WDM, there is no real need to go through the VFW-to-WDM mapper which is for supporting existing VFW applications only.
    Visual C++ MVP

  • My Computer crashes when i connect my Ipod. (Stop error, Blue Screen)

    For the past 3 weeks, my computer has been crashing regularly-- and it's due to the iPod. When i connect my ipod, iTunes starts up and as soon as it starts to Sync, it "blue screen crashes (see message below). When i run iTunes w/o the iPod connected, no issues and i can also use my iPod no issues:
    The Message i get is below: ..its a Stop error:
    * STOP 0x0000008e (0xc0000005, 0xBFA6FCBA, 0xA9F5130C, 0x00000000)
    * Ati3duag.dll -- Address BFA6FCBA Base at BFA1C000 DateStamp 3eade1b1
    Please help me!!
    Gateway Laptop Windows XP Pro

    i am having the same problem, but cant even get on my pc now with out using a system recovery disc! im really stuck and hope someone knows of a way of sorting this as i have only had it 2 weeks!! many thanks

  • Critical error, blue screen stop error

    after installing installation CD today, my laptop keeps going to a blue screen reporting a STOP error.... a critical error, but can't reslove. Have now removed the iTunes and it hasn't happened yet.
    Maybe a conflict, I don't know.
    Dell Inspirion Laptop   Windows XP  

    I found the answer !  Turns out it is/was not a Win7 problem, but a drive problem.
    I was following some links on another Win7 forum and happened upon mention of SSD drives causing a BSOD.  The one in particular mentioned was a Crucial M4 SSD. It sounded familiar . . . I have one as my C: drive.  Turns out I needed a firmware
    update. The update corrects a condition where an incorrect response to a SMART power-on counter will cause the m4 drive to become unresponsive after 5184 hours of Power-on time. The drive will recover after a power cycle, however, this failure will repeat
    once per hour after reaching this point. 5184 hours is about 7.2 months. Just a bit under how long I've had this system.
    I applied the update . . . . . computer has been running seven hours now.
    Thanks to all who helped me here.
    Joe
    Wanted to add for reference:
    The original post from Crucial acknowledging the issue.
    BSOD Crucial M4
    The fix is as simple as updating the firmware, but the hoops to jump through for the firmware update to take place is a bit frustrating.
    With my board, z68-v pro, it was necessary for me to go into the bios and change my controller mode to IDE. In addition I needed to remove the drive connected to the Marvell port and plug it into the Intel port as well as put my two ssd's on the first and
    second Intel ports. Once this was done I was able to get past the 'finding drives' screen and update the firmware for both ssd's. Once the update finished I went back into the bios and changed the controller mode back to AHCI. As i said, a frustrating experience
    but I commend Crucial for owning up to the issue rather than lead people to think their ssd's needed replacing or something was wrong with windows and subsequent unnecessary re-installs.

  • Nv4_disp.dll errors blue screen of death photoshop cs4 bridge

    Sometimes, when opening psd files from bridge in cs4 I am getting the Blue Screen of Death and a message stating the cause is nv4_disp.dll errors.   This started occurring a few days ago.
    Environment: XP Pro, nvidia 7900 GS video card, nvidia driver version 6.14.11.9038. [ 190.38].
    Anyone else experience this and has a solution?

    I bet you'll sudennly get this error without doing that to cause it soon aswell. I had a very similar problem with BSoD and Nvidia display drivers on 9800GTX GPU. It started just doing it one day completely out of the blue. Unfortinatly, i'm still not sure what caused it, but it seemed when looking around the web that it was in fact faulty drivers, but not necisarily the graphics card drivers, just a conflict with them for somthing trying to work with them.
    For me, i did everything under the sun and it worked.
    1. Get Spybot Search & Destroy, COMODO antivirus, Windows Live Onecare 30day free trial, and scan your system with each of them. Each one for me found soemthing new which was fairly unsettling.
    2. Re-install GPU drivers, re-install graphics tablet drivers if you have one, because that was thelast thing i had changed since i startd to get them, but it was a good few weeks afterwards, and it didn't fix it doing that anyway, but it may have helped somthing else work properly so just to be safe. Re-install anything you last installed, or remove it if you are willing.
    3. Disk defragment, Disk Cleanup, and run Clean Up Utilities. To help track down other problems, you can also download Regmon for windows made by microsoft: http://technet.microsoft.com/en-us/sysinternals/bb896652.aspx you can see what your computer is douing in the registery. The other one to download is Filemon, which is the same thing but shows what your computer processes are doing. http://technet.microsoft.com/en-us/sysinternals/bb896642.aspx
    Good luck, but presistence in not wanting to re-install windows will overcome it evertually

  • Windows 7 installation error (Blue Screen)

    I recently installed Boot Camp on my Mac Pro so that I could install Windows 7 Ultimate. I followed all the instructions. Once I get to the part where Windows is installed my Mac Pro restarts and I get a blue screen with a bunch of errors. Then my Mac Pro restarts again and I am giving the "Windows was not shut down properly message" and asks me to choose a start up option. No matter what option I choose the same thing happens over and over. Can anyone help?

    Apple doesn't support Windows 7 on our MacPro1,1. There is a llst of supported Mac of all things.
    To use more than 1.9GB RAM you need 64-bit which won't boot from Windows 7 DVD.,
    Okay, you want to put both on one hard drive; I don't. So you need BCA which is also semi crippled.
    Lion: too early except to test drive.

  • Photosmart 6510 Printer error/Blue screen on printer display Code:B864F472

    Hello
    I'm having a reoccurring problem with my HP Photosmart 6510 all-in-one. The printer will stay on for about five minutes, give or take, and proceed to flash a blue screen (on printer display) with error code B864F472
    Next the screen displays a "Printer Error" message followed by "Please turn printer off and then on" with all lights on the printer flashing.
    It will display this until I cycle the power and it repeats the same behavior after about five minutes.
    I've searched extensively for a solution and have tried multiple things. Such as:
    -Unplugging from back of printer and wall, 30 sec wait then plug back in.
    -Clean cartridge and print header contacts.
    -Set static IP.
    -Printed various reports from service mode, No errors, Excellent signal strength.
    -Connected to laptop through USB.
    -Partial reset, Semi-Full reset.
    -Reinstalled drivers on all computers.
    -Updated firmware/software on printer itself.
    -Ran HP Print and Scan Doctor.
    -Reset Router
    I'm at a loss now. The unit is just over a year old. I have two laptops and a desktop on the same network. Two computers running Windows 8.1 64-bit and the other Windows 7 64-bit.
    Any help will be appreciated. Thanks in advance.
    -Lee

    I have the same problem. and no solution
    All seems to work before the 5 minuts (I can print diagnostic page from the PC), then I think it a microcode problem ...

  • Multi Error Blue Screen Crashes on every start-up

    Hello,  I own a HP Pavillion Elite m9340f desktop computer.  Recently, my computer has started getting blue screen errors after the initial start-up.  These errors are almost always different.  After I restart, usually my computer works fine.  I've ran virus checks and ad aware programs to clean my computer.  I've also checked and ran Microsoft diagnostics - which referred me to my desktop manufacturer.  
    So here I am.....  suggestions? 
    This question was solved.
    View Solution.

    Thanks for your quick reply JTodd.
    let’s give this a shot I would like you to run a system file check on your system files just to make sure they aren't having any issues. Now once the scan is finished it will let you know if it found any violations if so it will try and fix them if it  can't fix them will say it couldn't.
    If you’re not sure how to run a system file check, click on this link and it will provide you what you need to know. It will take a little bit of time so you don’t have to sit there and watch.
    Also if you haven’t done so already I would suggest you run full system scan with your antivirus protection.  If you end up doing that it will take up some time more time than the system file scan.
    Please respond back with your results
    Thanks
    Clicking the White Kudos star on the left is a way to say Thanks!
    Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Maybe you are looking for