Vista Stop Error Bleu Screen

I installed Vista 32bit via boot camp. Often when booting to Vista, I get a stop error blue screen telling me that "A problem has been detected and windows has been shut down to prevent damage to my computer". Calls it "an internal power error". It then restarts to OSX. I try again and its a crap shoot whether or not Vista loads. I re-installed Vista and d'loaded and ran the BCupdateVista32, but the problem persists. Is there a solution or do I scrap my boot camp?

I have the exact same problem on my 24" iMac, running Snow Leopard. Vista 32bit crashes on startup with a blue screen of death, the message stating an internal power error. If I restart in Vista, it's usually fine. Any ideas?

Similar Messages

STOP ERROR - Blue Screen - on Lap Top - Fixed, tear1, support rocks!!!!!!

New Iphone, and new laptop, installed itunes Noprob,
Hooked Iphone to usb laptop found Iphone and installed and activated Noprob,All systems go, I am loving it.
I then ejected my Iphone and hooked up my Ipod to transfer purchesed music and shows transfered Noprob, so I eject my Ipod to hook up my Iphone to put my purchesed music on it.
THATS when it happened.
STOP ERROR- Blue screen,cpu restarted on its own.
I deleted itunes and I deleted camradrives, printer drivers.
I tried allmost everything and still got the same blue screen.
To make a long story shorter I called apple talked to the (now this is important) Iphone/Itunes department they are seperate but have a div. that works as one but you have to ask for the department that takes care of both or you will talk to both or 3 or 4 other dept.
Tear 1 Support had me do a soft reset on my phone it did not work so I backed up my phone # and they showed me how to do a compleate reset and it worked.
I have been Error and blue screen free for 2 days and I feel very posative about the future with my relationship between my cpu and my phone
Thank you for your time.
I hope I help some one I found no relief here with my problem but its a great resource for information
GOD BLESS TEAR 1 SUPPORT YOUR TEAM ROCK'S
Pro-Iceman
Anacotes,Wa

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

My Computer crashes when i connect my Ipod. (Stop error, Blue Screen)

For the past 3 weeks, my computer has been crashing regularly-- and it's due to the iPod. When i connect my ipod, iTunes starts up and as soon as it starts to Sync, it "blue screen crashes (see message below). When i run iTunes w/o the iPod connected, no issues and i can also use my iPod no issues:
The Message i get is below: ..its a Stop error:
* STOP 0x0000008e (0xc0000005, 0xBFA6FCBA, 0xA9F5130C, 0x00000000)
* Ati3duag.dll -- Address BFA6FCBA Base at BFA1C000 DateStamp 3eade1b1
Please help me!!
Gateway Laptop Windows XP Pro

i am having the same problem, but cant even get on my pc now with out using a system recovery disc! im really stuck and hope someone knows of a way of sorting this as i have only had it 2 weeks!! many thanks

Stop Error / Blue Screen of Death... Please Help

Hello,
I have been having problems with my desktop computer ever since I Installed the BT Total Broadband software.
I have seen a similar topic regarding the Stop error and BSOD,but the problem there appears to be with a wireless connection with a laptop. I, on the other hand, am using an ethernet cable connection with a desktop, so I am not sure if the fix will also work for me.
The problem I have am having is that my computer frequently either resets or BSOD's, with an IRQ_Less_Or_Equal message. This usually occurs within minutes of any kind of internet navigation, and after it has occured once, the problem seems to persist, causing my computer to freeze during bootup, or crashing/resetting shortly after windows (eventually) loads successfully.
Please help, this is driving me crazy!

Thanx again for the replies guys, this is all very helpful!
Firstly, Im running windows XP, SP3.
Also, I have to admit the inside of my computer is quite dusty and could use a good clean.
Finally, its interesting to note that although my computer has a habit of crashing/resetting/BSODing quite regularly during online activity, sometimes the system seems to stabilise, and will run perfectly well for hours at a time.
However I have reached a point where the continual errors, and the resulting 100x crashes and windows failing to load has driven me to seek professional help (here, not a pyschiatrist )

Geforce 6800 Stop Errors

After a month of tracking a random reboot problem, I have finally managed to get a stop error blue screen. To my delight it has pointed out the very cause of my problem. NV4_disp.dll. Now, my drivers for my MSI geforce NX6800 are the 61.77 version. Whats the solution to this problem?

Overheating not an issue, stays very cool
Drivers I have tried muktiply for both mobo and video card to no avail
Reformatted 3 times now, the agony of doing that was horrible
Underpowered, unlikely, as I said, also upped the volts on the agp slot to 1.6
Sharing IRQs i'm not familar with, symptoms, solutions?
Hardware incompatibilty, this one I have explored a lot, I have swapped my ram. I have become increasingly suspicous that etheir my motherboard or cpu is shot
Motherboard looks perfect, only month old, contacts clean, no residue, no oils
VGA i have become increasingly curouis if it is the source of my problem, although the installation went well, the fact that one of the errors pointed out NV4_Disp.DLL makes me think that my drivers are corrupt.
My last blue screen, however pointed to win32.sys
Event Type:   Error
Event Source:   System Error
Event Category:   (102)
Event ID:   1003
Date:      10/4/2004
Time:      7:46:02 PM
User:      N/A
Computer:   MASTER
Description:
Error code 1000008e, parameter1 c0000005, parameter2 bf804892, parameter3 f78ce714, parameter4 00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 38 1000008
0020: 65 20 20 50 61 72 61 6d e Param
0028: 65 74 65 72 73 20 63 30 eters c0
0030: 30 30 30 30 30 35 2c 20 000005,
0038: 62 66 38 30 34 38 39 32 bf804892
0040: 2c 20 66 37 38 63 65 37 , f78ce7
0048: 31 34 2c 20 30 30 30 30 14, 0000
0050: 30 30 30 30 0000

Restarting After a Blue Screen Stop Error

I have received a Blue Screen Stop Error on my Toshiba Satellite 5200 Series laptop.
I could report it here, in full, if that would be helpful. However, it begins by telling me to restart the machine but the unit's Power button is not allowing me to switch it off.
What action should I take ?

Crikey ! Someone at another forum just told me to hold the button down for 5 seconds..... and it worked !

Critical error, blue screen stop error

after installing installation CD today, my laptop keeps going to a blue screen reporting a STOP error.... a critical error, but can't reslove. Have now removed the iTunes and it hasn't happened yet.
Maybe a conflict, I don't know.
Dell Inspirion Laptop Windows XP

I found the answer ! Turns out it is/was not a Win7 problem, but a drive problem.
I was following some links on another Win7 forum and happened upon mention of SSD drives causing a BSOD. The one in particular mentioned was a Crucial M4 SSD. It sounded familiar . . . I have one as my C: drive. Turns out I needed a firmware
update. The update corrects a condition where an incorrect response to a SMART power-on counter will cause the m4 drive to become unresponsive after 5184 hours of Power-on time. The drive will recover after a power cycle, however, this failure will repeat
once per hour after reaching this point. 5184 hours is about 7.2 months. Just a bit under how long I've had this system.
I applied the update . . . . . computer has been running seven hours now.
Thanks to all who helped me here.
Joe
Wanted to add for reference:
The original post from Crucial acknowledging the issue.
BSOD Crucial M4
The fix is as simple as updating the firmware, but the hoops to jump through for the firmware update to take place is a bit frustrating.
With my board, z68-v pro, it was necessary for me to go into the bios and change my controller mode to IDE. In addition I needed to remove the drive connected to the Marvell port and plug it into the Intel port as well as put my two ssd's on the first and
second Intel ports. Once this was done I was able to get past the 'finding drives' screen and update the firmware for both ssd's. Once the update finished I went back into the bios and changed the controller mode back to AHCI. As i said, a frustrating experience
but I commend Crucial for owning up to the issue rather than lead people to think their ssd's needed replacing or something was wrong with windows and subsequent unnecessary re-installs.

I have ipad 2. Safari stopped working. Screen appears with light gray cover. Some websites show errors when debug is on. But how actually can I debug or fix it? Thank you.

I have ipad 2. Safari stopped working. Screen appears with light gray cover and is frozen. Some websites show errors when debug is on.
But how actually can I debug or fix it? Thank you.

Here are a couple suggestions:
1. Go into Settings > Safari and Clear Cookies Clear Cache
2. Fully close Safari: from your home screen, double tap your home button and the most recently used Apps will show up. Hold your finger on the Safari App until all Apps start jiggling. You'll see a minus sign on the upper left side of Safari. Touch the minus and Safari will fully close. Touch your home button again to stop apps from jiggline, then touch your home button again to return to your home page.
3. Reboot your iPad: Press and hold BOTH the power and home buttons at the SAME time for at least 10 seconds (ignore the red slider) until the Apple Logo appears, then let go of both buttons and your iPad will restart, but no data or settings will be lost.
After iPad comes back up, try Safari again, and you should be good to go.

Blue Screen Stop error

I have experienced windows reboots due to stop error like 000000c2 or 100008e. First I have reinstalled windows and all the adjacent software, but it seems the problem keeps on hitting me again. Last week I have connected my notebook to internet and since then I have had two windows suddenly reboots. I don't think it's a virus 'cause I'm running Kaspersky, with a Sygate firewall and a Ad-Aware real time protection spyware shield. Could you please give me an advice regarding these issues.

Hi Vlad
Not easy to say what the problem can be but if you describe some problem you can give more info that can be useful. At the basis of your posting we can just speculate.
Which unit you have?
Some hardware upgrades (like memory)?
Connected some external devices?
If the problem persists after fresh OS installation I presume that there is some hardware problem.

NEO 875P blue screen stop errors.

i am getting nothing but stop errors, i have owned my pc for less than a 2 month's and have had these errors.
0X000000D1,- which is logitech mouse....
0X00000008,0Xf77c6d70,- which microsoft dont have a clue....
0x000000D1, (0X0CC483FF, 0X00000002, 0X00000000, 0X0CC483FF)-WHICH IS SOMETHIN ABOUT HT.
0x0000007f,
and many many more..
now my hdd is trashed, and i can't get my pc to run with ht enabled, which means i wasted more mony on a fancy gizmo which does nothin.
as for my mobo, i am sure it is lovely, but now i hate it.
i wish i had bought intel's 875 so i could complain at them, but it is microsoft's fault.
i hate them, and all the little beggers who go around infectin xp machines, give me an adress so i can go and kill one of em...
sorry for rant, but this really is the end...

Quote
Originally posted by daffy the red
i am getting nothing but stop errors, i have owned my pc for less than a 2 month's and have had these errors.
0X000000D1,- which is logitech mouse....
0X00000008,0Xf77c6d70,- which microsoft dont have a clue....
0x000000D1, (0X0CC483FF, 0X00000002, 0X00000000, 0X0CC483FF)-WHICH IS SOMETHIN ABOUT HT.
0x0000007f,
and many many more..
now my hdd is trashed, and i can't get my pc to run with ht enabled, which means i wasted more mony on a fancy gizmo which does nothin.
as for my mobo, i am sure it is lovely, but now i hate it.
i wish i had bought intel's 875 so i could complain at them, but it is microsoft's fault.
i hate them, and all the little beggers who go around infectin xp machines, give me an adress so i can go and kill one of em...
sorry for rant, but this really is the end...
I understand you... I have almost the same errors... only difference is I have 865 PE board.
I just CAN'T make this board stable.
I can almost asure you your memory modules are right, I tested mine and they were OK.
where you say 0x00000008 you mean 0x0000008E? because that's the error I was getting sometimes.
I disabled shadow and caching in bios but that didn't work.
I have other PC in my home with an intel 875P board. It never crashes. So I still don't know if I have to blame the board or my vga card or what...
I am so tempted to buy an Asus P4P800...

Windows 7 / Server 2008 R2 Bare Metal Restore 0x0000007B Stop Error

Hi,
I am tring to restore a Server 2008 R2 Standard Ed (full installation) RTM to a virtual machine, from a full Windows Server Backup image taken of a physical machine (Dell PE 2970). All restores fine, and looks good until it tries to boot,
when a Stop Error occurs, with the following error:
*** STOP: 0x0000007B (0xFFFFF880009A9928, 0xFFFFFFFFC0000034, 0x0000000000000000, 0x0000000000000000)
I believe the non-bracketed portion means "INACCESSABLE_BOOT_DEVICE".
There is only the System Reserved volume + a C: volume (system volume) + F: volume (DVD drive) on the original server. It has had other volumes in it before, which are correctly listed in the MountedDevices registry key, but they have not been physically
present for a while.
The virtual disk I'm trying to restore to is several GBs larger than the original virtual disk on the RAID controller (2 disks in RAID 1).
I can't figure out why the server isn't booting. I've successfully restored Server 2008 machines from physical machines to VMs before, including servers using hardware RAID cards (e.g. Dell SAS 6/iR). The only difference I can think of is
that this is Server 2008 R2, this is a 2 proc server (I've tried several virtual proc numbers on the VM to no avail), and the RAID controller is PERC 6/i, and this is the first server I've tried with that particular RAID card.
Any help would be greatly appreciated, even if it's to point out that I'm looking in the wrong direction.
Many thanks,
Chris

Hi MailStane,
Sorry for the long delay in getting time to test this, been flat out but got a chance today to rigorously run through some scenarios - and I'm absolutely thrilled to confirm we have a solution!!! :¬) At long last, thank you immensely for your post
and the original link - the steps above alone didn't work so I kept testing and and with the help of the link you gave modified the process a bit, and here's the the final working solution (all of this works for Windows 7 as well):
After completing the BMR process don't restart.
Select Command Prompt.
regedt32<CR>
Highlight HKEY_LOCAL_MACHINE, File>Load Hive>[restored volume]:\Windows\System32\Config\SYSTEM>Open>Key Name = Restored_HKLM>OK.
Expand Restored_HKLM\ControlSet001\services and ensure the following are set:
  If restored to a (VMWare) VM then ensure intelide>Start = 0 and LSI_SAS>Start = 0; msahci>Start = 3 and pciide>Start = 3
  NB: I have only tested this with VMWare VMs (Player/Workstation and vSphere) but will likely translate across to Microsoft (e.g. HyperV) VMs. The LSI_SAS value is definitely required, I couldn't boot in a VM until this was chaned to 0.
Or if restoring to a physical machine with native HDD controller
then ensure msahci>Start = 0 and pciide>Start = 0; intelide>Start = 3 and LSI_SAS>Start = 3
Highlight Restored_HKLM and then File>Unload Hive.
Close windows and restart.
You should now have a successfully booting restored Server 2008 R2! :¬)
(Remember if it's a new add-in RAID card and you supply the drivers it will successfully inject them into the restored OS - see previous posts in this thread)
NB: Don't worry if you have restarted without making the changes and it Blue Screens, come back through these options and if set correctly it will boot normally - nothing is damaged by the Stop Error, and the ide settings can be turned on and off with no
permanent effect on the OS. I.e. change and restart until you hit the right combination required - I've tested this copious times and when changed back to the correct settings the OS boots again without issue.
If in doubt, turn on all possible required services e.g. set both intelide = 0/pciide = 0 and msahci = 0, or set all of these to 0 and it will still boot with the correct driver/s:
   aliide, amdide, atapi, cmdide, iastorv, intelide, msahci, pciide, viaide and LSI_SAS.
I don't recommend this due to the overheads it could introduce, but it will work and will get the machine up as quickly as possible if confidence in the exact combination required is in doubt.
Settings for typical destination machines - skip if desired:
VMWare VM:
aliide 3
amdide 3
atapi 0
cmdide 3
iastorv 3
intelide 0
msahci 3
pciide 3
viaide 3
LSI_SAS 0
Dell PE2970 physical machine with RAID card:
aliide 3
amdide 3
atapi 0
cmdide 3
iastorv 3
intelide 3
msahci 0
pciide 3
viaide 3
LSI_SAS 3
Dell PET100 physical machine on native SATA adapter:
aliide 3
amdide 3
atapi 0
cmdide 3
iastorv 3
intelide 3
msahci 0
pciide 0
viaide 3
LSI_SAS 3
Win 7 64x custom built physical machine on native SATA adapter:
aliide 3
amdide 3
atapi 0
cmdide 3
iastorv 3
intelide 3
msahci 0
pciide 0
viaide 3
LSI_SAS 3
KEY FOR SERVICE START VALUES:
0 = ?
1 = ?
2 = Automatic
with DelayedAutostart = 1 = Automatic (Delayed Start)
3 = Manual
4 = Disabled
MailStane thank you once again for posting - it's helpded no end resolving a big bug bear with Server 2008 R2 and Win 7's backups, and while I'm still nonplussed at to why these manual steps are necessary when 2008/Vista worked flawlessly without intervention
(wondering if all the drivers are on by default but haven't checked it out yet), we now have a confirmed quick and viable fix.  Thanks for being generous enough to share and well done!
Vikas, thank you for at least giving us a look in when the rest of Microsoft refused. If you want to publicise this information feel free (any credit to MailStane and/or me I'm sure would be much appreciated) - it affects anyone
in a Server 2008 R2/Win 7 DR scenario where the original hardware can't be replaced or emergency measures dictate using whatever's available whether home or business, and as SCDPM 2007/2010 uses the built-in backup this procudure applies equally. On
another note, this has also again opened the doors (IMO) to DPM as a viable all round backup solution, as the one stop backup including system state restores is a big bonus over third party block based backup solutions that painlessly allow different hardware
restores for R2/Win 7 (personally tested) but do not allow for system state restores. Now if compression were included in an SP or the next version it will have reached that always elusive "ideal" ;¬).
RidvanSeber - if you're still having difficulty hope the steps above to load the restored Registry hive help.
Case closed.
Many thanks,
Chris

ERROR Blue Screen when plugin ipod touch 3rd gen 32gb-- how do i FIX it!

Hello, just recently had Windows XP re-installed on my laptop and just the other day tried to conect my ipod to it and got this ERROR message:
A problem has been detected and windows has been shut downto prevent damage to your computer.
if this is the first time you've seen this stop error screen, restart your computer. if this screen appears again, follow these steps.
Check with your hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. if you need computer to use safe mode to remove or disable components, restart your computer, press F8 to select advance start up options, and then select safe mode.
techincal information:
*STOP: Ox0000007e (0xc0000005, 0x00000000, 0xf7a757c8, 0xf7a754c4)
Beginning dump of pysical memory
physical memorydump complete.
contact your system administrator or techinical support group for further assistance
i have tried the following:
-testing other devices in same USB port = they are fine.
-erase and reinstall itunes new version
nothing seems to work .... please help any suggestions!!

thank you soo much i had some pics on my ipod that were snap shots from online pics under saved pictures and as soon as i erased them i was able to connect my ipod to my laptop thanks a million for the link!

Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

Why am I receiving the "Unfortunately, Messaging has stopped" error message and how do I fix it?

I am so upset. Please read my messages from my postings. This has nothing to do with SIM Card, Hard Reset, Apps, Google Gmail Account, nothing. I have gone thru all of this and NOTHING has fixed this. I went to the store today and spoke to the manager on duty. He said he had to try and duplicate the problem before he could help me. I showed him "screen captures" I did, told him it's out here on the board, etc. etc. Needless to say I ended up coming home with the same phone, "he" erased the phone and started over again. Well guess what, it's not a error with "MY" Gmail account being corrupted because if that is the case Mrs. Hayden14 has a bad Gmail account too. If you guessed it, the phone just crashed again! I was able this time to capture a report with ALL the history in it and saved screen captures to PROVE to him this is not a joke. Even the report says "Crash". This time it was something else I don't even or ever have used. I have also wasted over a day , yes a full work day on this without question.
I have had to get the run around for the last day. This is totally ridiculous, including them putting me on hold for 55 min. Oh, that's another funny story. Anyways, tomorrow morning I am going to the Verizon store one last and final time and I hope they decided to do the right thing and give me a phone that does not crash and works. It would be handy at work for me, especially where I work at. I hope hope hope someone listens to and helps me. I would love for them to see me walk in, take my phone and say to me were going to get you another phone, hand it to me, see if it works and prove it's the device. I don't hear anyone having this issue on other phone types so sounds like its the phone type.
I have had 3 phones now in the matter of 2 weeks. I am sure the FedEx charges will add up to a cost of a new phone at some point and start to outbalance your requirement to give me the same phone when it has the same problem.
Can't wait to see what happens tomorrow.

PC getting Stop error when connecting iTouch

I have a 2nd generation iTouch that I sync'd up to my pc with no problem when I first got it about 2 weeks ago. Now everytime I connect it, I get the blue screen with a stop error. My daughter also has an iTouch (1st generation) and I can connect that one with no issues. Any ideas on what to do? I repaired iTunes but really didn't want to uninstall and it seems to be just my iTouch. I can connect it to my work laptop to charge with no issues too.

Well, the other USB port was working for a while. Now none work. When I plug my iTouch in, I get the Windows XP stop error and the blue screen of death. The USB port works for other things like my jump drive. I can plug my iTouch into my laptop and all is fine. I recently upgraded my iTouch to 3.0 but it still worked after doing that. Do you think my USB drivers need to be upgraded?

ITunes Stop Error

Ok ever since last night, every time i open iTunes i get a stop error on a blue screen causing my computer to restart. The error is 0x0000008E. CAN SOMEONE PLEASE HELP ME?

I figured it out, it was just permissions on the drives..

Vista Stop Error Bleu Screen

Similar Messages

Maybe you are looking for