Vista, Sun JPI and 10.1.2.2
Has anyone got Forms to work using the Sun 1.5 JPI on Vista using 10.1.2.2 app server?
I know 10.1.2.3 is out now but for various reasons it will be a few weeks probably before I can get our servers patched.
I was just wondering if anyone else has experienced a problem where the IE7 process hangs (not responding) just as the Forms separate frame pops up. I should explain that everything works perfectly the first time the url is entered (and it downloads and installs the jpi correctly) - it is only subsequent times (eg. after the PC is rebooted) that it seems to hang. Uninstalling Java and starting from scratch seems to fix it until the PC is next rebooted and then it hangs again.
I am using the latest 1.5 patch 15 and the server is configured with the family clsid so anything in the 1.5 family is used.
This problem seems to be reproducible either logged in as administrator on Vista or standard user, using http or https and just about everything else I have tried.
If it absolutely will not work with 10.1.2.2 then I'll give up and spend my time on the 10.1.2.3 patch but if there is something simple that I can tweak to get this working then that would be preferred at this point.
Any help would be appreciated. Thanks,
Alastair
Hello Alastair,
I can only says to you that the tests i have made in 10.1.2.2 whith vista and JPI was not good .
Lot of problems like the ones u describes, or fmx that can't be opened.
I have installed 10.1.2.3 and work much better (even if some times it hangs a long time, about 10s, and go on)
As i use ou'r application in this environment all sems to work, and that was not case in 10.1.2.2
Sorry for you ...
Lionel
Similar Messages
-
Hi,
Any news/thoughts on the support of Sun JPI with MS IE? The SOD on OTN states this is targeted for "patch 2". Is this the forthcoming 10.1.2 release?
When Sun JPI will be supported, which version of JPI would you expect to be required? 1.4.2 or 1.5?
Currently we're using Forms 9.0.4.1.0 with JPI 1.4.2 without any major problems. However, 1.5.0 doesn't seem to work (very slow network connection through firewall and hanging IE when closing browser window).Thanks for all the answers.
We're currently running into two issues with v1.5:
- Internet Explorer doesn't close when pressing the top-right "X". Not even if you've exited the Forms application in a proper way. You'll have to kill IE. This issue does not arrise with Firefox (it seems to destroy its Java environment in another/more destructive way).
- Performance with Sun 1.5.0 is very poor when connecting to our application server through the firewall (Initial connection approx. 2 minutes). Connecting from within the DMZ is not an issue.
Both issues do not arrise with 1.4.2 or with JInitiator. So, I guess I'm just giving more reasons to stick to a certified combination :-) -
All my purchased song from iTunes are not playing complete (iPod and computer with Windows Vista), unexpectedly stops and continues with next song. What am I doing wrong?
Are the songs playing whole in iTunes? if not download them again.
else read this Apple Support Article on your problem
Have a nice day! -
iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?
Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.
-
Vista 64 bit and CS4 and color management
This is a question about Vista 64 bit and CS4 and color management. I scan 4x5 film and sometimes end up with up to or even bigger than 1 GB files. Obviously that needs as much memory as possible. Windows XP is limited in this regard and I am in the market for a new speedy computer which won't force me to stay at a snail's pace. In this month's Shutterbug, David Brooks in his Q&A column says to avoid Vista for color management reasons, but offers no explanation or support for his opinion. He implies one should wait for Windows 7 for some unstated reason. With a calibrated monitor and printer and Photoshop controlling color files sent to the printer, why would Vista be any different or worse than XP? Is he on to something or just pontificating? Does anyone know any reliable info about Windows 7 that would make it worth waiting for?
Thanks.Zeno Bokor wrote:
Photoshop has direct access to max 3.2gb
On Mac OS X, PS CS4 can use up to 8 GB of RAM, but only directly accesses up to 3.5 GB. (Figures quoted from kb404440.) In using PS CS4 on Mac OS, though, direct Memory Usage maxes out at 3 GB even. If you set usage to 100% (3 GB), then plug-ins (including Camera Raw and filters), as well as actions and scripts, can access RAM above that 3 GB to between about 512 MB and about 768 MB total (seems to vary depending on which filters et al that you are using), leaving the rest up to 4 GB for the Mac OS. If you have more than 4 GB, then the amount of RAM above 4 GB is used by PS as a scratch disk. This increases performance significantly for most things because writing to and reading from the hard drive is much slower than doing so with RAM.
I haven't done the testing for actual RAM usage and such for PS CS4 on Vista 64, and Adobe's documentation is very much lacking in detail, but, based on the statement "If you use files large enough to need more than 4 GB of RAM, and you have enough RAM, all the processing you perform on your large images can be done in RAM, instead of swapping out to the hard disk." from kb404439, it seems that PS would be using RAM in very much the same way as I described above for Mac OS, except that the scratch disk usage in RAM wouldn't be limited to 8 GB (instead to how much you have installed). Has anyone done any performance/load testing to know for sure? I didn't see any such studies published, but I am curious if one has been done.
I will agree that there is a definite performance advantage when using PS CS4 (64-bit) on Vista 64, which I've experienced, especially when working very large compositions.
My initial recommendation to the OP to use Mac was based upon reading those articles about bad color management. As I stated before, I have never experienced that problem, and clearly the views of all that have posted here so far indicate that the problem may not be a real issue. (Perhaps this David Brooks fellow and Steve Upton both like to mess with their computers and broke something in Windows?) -
my pc windows vista home system and wndows vista ultimate boht service pack 2 and itunes do not recognize or do not see the ipod touch 4g ios 5. why'??'
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
We'd better check on that, kris. If you enable iTunes in your Windows firewall, does that help with your connection? See the following document for instructions:
How to enable iTunes in the Windows XP Firewall
EDIT: Drat ... gave you the link to the wrong document. Try this one instead for your Vista:
How to enable iTunes in the Windows Vista and Windows 7 Firewall
Message was edited by: b noir -
Windows Vista 64 Bit and Button Support - Qosmio G30?
Windows Vista 64 Bit and Button Support?
Everybody claiming that Vista x64 (or Ultimate) can't be used with FN keys or Flash Cards is utterly wrong!
I have a Qosmio G30 running Vista x64 Ultimate, and have both FN keys, Toshiba Flash Cards and (partly) the hardware buttons at the top working.
After a lot of research, I found that Toshiba has released a 64-bit version of VAP called util_tvap_27581D. If you google it, you might discover it... -
I have windows vista home premium and all other iTunes worked on my laptop, I downloaded iTunes 10 and now the iTunes will not connect to the Internet. I use Mozilla firefox on my laptop and for some reason it keeps saying the connection timed out and I'm not connected to the Internet when I am. Why isn't iTunes recognizing my web configuration?
It probably has to do with your security and/or browser configuration.
When my laptop crashed last year and I had to get a new one, I dealt with the same thing. First, go to your control panel and select the security section. See if your firewalls are up or not. If they are, turn them off. If you have any software to speed up your browser, that can affect the connection as well. Go into that software and disble/turn it off. If this doesn't work, contact customer support. They have a few other tricks they had me try that worked, but I can't remember them now. -
I am running Windows Vista 64 bit and i get a runtime error R6034 when i was updating itunes. How can i update itunes with out getting this error?
* Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"
App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore -
Windows Vista Home Version and Adobe Flash Player 10.
I use Windows Vista Home Version and I am finding it difficult to download Adobe Flash Player 10.
It appears to have been downloaded but on examining Control Panel, I discovered that its content is empty (no size is aportioned to it).
Most importantly, I am unable to play videos that require adobe flash player.I understand Vista is a 32 bit.
IE 8 is what I have but I would consider IE 9 if that would be necessary.
Just a bit more update. I just tried to download Adobe FP 10 again with the following results, again:
The Adobe Download Manager windows shows:
FP 10.3 Status as 100% "Installation Pending".
FP 10.2 Status as 100% " Instatlling Application"
and that will go one forever but never really actually installs anything and just keeps cycling through the "Add to Download" e.g. "Fanbase", "Times Reader"
and "Adobe Air" (none of which I want added to the download), and the download and installation shows as 100%.
Go figure! -
I need my product key to enable to activate windows vista home premium and i can't see iton certific
I need my product key to enable to activate windows vista home premium and i can't see it on Certificate of Authenticity label
Once the label is worn, you cannot get another key for free. You are better to order a recovery disc set from HP, then you dont need a key
You can order HP recovery media below, or call HP on the phone to order 1-800-474-6836
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bph07143&cc=us&lc=en&dlc=en#N76
If HP no longer has Recovery Media for your model, order them here
http://www.computersurgeons.com/Default.aspx -
Disabling SMB2 and SMB3 Client from Windows Vista, Windows 7 and Windows 8.
There are many programs that are using a shared file on the server from clients from XP to Windows 10. From time to time it seems like there is a network outage and the handle to the file is broken and the file
cannot be read or updated. It seems more prevalent on a Windows 2012 server but may have happened from time to time on 2008 & 2008 R2. However there are not any network problems so it just leaves the server & Client
I have searched for possible resolutions including:-
Turning off the Cache for the share
Disabling the network adapter power setting to allow windows to put the device to sleep.
Disabling Antivirus/configuring it to ignore folders for on access scanning
Disabling SMB Signing
Configuring the clients DWORD registry value SilentForcedAutoReconnect=1 in HKEY_LOCAL_MACHINE\Software\Microsoft\CurrentVersion\NetCache
Setting the "NET CONFIG SERVER /AUTODISCONNECT:-1" to not drop client
connections
The last bit of trouble shooting that I can think of is to disable SMB2 and SMB3 as that does a lot of caching and batching of packets which could also be the cause of the problem.
I have looked at
http://support.microsoft.com/kb/2696547/en-us
I have disabled SMB2&3 on the server as that is very straight forward.
When I get to the section about disabling SMB2 on the client the command fails.
sc config
lanmanworkstation depend= bowser/mrxsmb10/nsi
After running the above command, it returns an error:
[SC] ChangeServiceConfig FAILED 1059:
Circular Service Dependency was specified.
So it's not worth running the following command:
sc config mrxsmb20 start= disabled
I have tried the command on Windows Vista, Windows 7 and Windows 10 just to confirm that it's nothing to do with any particular PC, machines in Domains and Non-Domain machines.
So, my questions are:-
1, is
http://support.microsoft.com/kb/2696547/en-us actually correct and up to date and for the OSes (Vista, 7, 8, 8.1, 2012 server and Windows 10) with latest updates & service packs?
2, How do I disable SMB2 and SMB3 on clients for troubleshooting purposes the server to resolve problems with shared files (multi user access)
3, If I just disable SMB2 & 3 from the server would that force the clients not to use SMB2 when communicating with the server and therefore not caching the directory structure and file not found etc? I have seen posts that suggest this is not the case.
4. Does sc.exe have a bug in it?
Thanks in advance
RobHi,
I made a test in our testing enviroment, everything works fine to disable SMB2 and 3. For your problem, in my opinion, as I didn't find any specific report about this error, it would be better to use Process Monitor to capture the trace when running the
command.
Start Process Monitor, then set the filter as cmd.exe, after that, open CMD and execute the command.
Process Monitor:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
In addition, I found another thread that had similar error with yours, you can take its solution as reference.
https://social.technet.microsoft.com/Forums/windows/en-US/506828c8-e7af-4039-aca7-43321939bb55/offline-files-synchronization-error-the-file-specified-cannot-be-found?forum=w7itpronetworking
Roger Lu
TechNet Community Support
Roger,
Many thanks for the time taken to look into this.
I've downloaded process monitor and loaded it. I filtered for cmd.exe started capture and saved a 1mb file.
However I don't think this is going to help unless you can point me in the direction of what you're expecting to see in the capture file? If you want me to send you it I can but it does contain personal information which I'd rather not place online.
You can recreate the problem yourself by doing the following:
Go to modern.ie
Download any windows 7 virtual machine for your preferred of virtualisation platform
log in, start cmd as administrator and run the command
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
You will also receive the same error.
[SC] ChangeServiceConfig FAILED 1059:
Circular Service Dependency was specified.
You can also try it on the Windows 8 and 8.1 machine if you have time.
I checked the link to the similar error and that just looks at the file not found problem which is the smb2 cache. They still didn't resolve the slow access to the share which is seen on a machine that has anti-virus on it when you go to right click
on the folder or a file in the folder. It's about a 20 second (spinning circle) pause every time. The problem is bigger than that. If you have shared files on the network share that are used by multiple people at the same time, say a spreadsheet or database
file windows is loosing the connection to that file so the user cannot write to it even if they have the file open. The smb2 caching shouldn't cause that problem.
It appears that I have to disable from SMB2 and SMB3 and ensure that the clients only use SMB1.
If SMB2 & SMB3 are disabled from the lanmanworkstation service the clients will not do any caching even if the server has disabled the share cache (offline files for that share).
The problem with the "Circular reference" error message is standard across all versions of windows that have "smb2" or "smb2 and smb3". Can you recreate that problem? Or is it working on your windows computer and on the machines
downloaded from modern.ie ?
My testing has shown that the command "sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi" does not work. Therefore that's the one I want to resolve first. By resolving that I may be able to get the clients accessing the share to behave
themselves and use the shared files correctly as they always did from Windows 95/NT4 through to Windows XP and 2003/2008 server.
I'm unable to recreate the problem with multiple users having access to shared database files on windows 2012 server from Windows 7 clients were the access to the files drops once a day or once every couple of days.
Kindest Regards
Robert -
Need to do a clean install of Win 7 on my HP Dv7 1464rw. Purchased it with Vista on it and it was up
Need to do a clean install of Win 7 on my Dv7 1464rw. I purchased this computer with Vista on it and HP sent me the upgrade for Win 7 as part of the purchase. Can I reuse these discs or do I need some other disc to do this? Also, Do I need to wipe the hard drive clean or will the install process do that?
Do you have the license key with the Windows 7 upgrade disk? If so you should be able to use it to format and reinstall.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
My Photoshop Elements serial number is not working? The CD says it is for Windows XP/ WIndows VISTA...and my currest OS is Windows 7? Is that the issue?
This is a question for the Photoshop Elements forum: Photoshop Elements. A moderator may find and move this to the correct forum for you.
Benjamin -
Just downloaded Firefox 4 on Windows Vista 32-bit and its not working at all.
So I just downloaded Firefox 4 on Windows Vista 32-bit, and it's not working at all. I open up Firefox and there is not tab bar, and all the command buttons are repeated 3 times, and are on 3 different bars. This only happens with Firefox 4 and not Firefox 3.6.10. Also, when I go the menu bar and I try to click soething, nothing happens. I'm not sure why this is going on. Help anyone? Here is a link to a screenshot of my browser.
http://img683.imageshack.us/i/firefox4y.jpg/I have this too, but doesn't even startup now? I downgraded to the previous version and all is OK. I also have a 64 bit version of Vista and it seems to work "a-OK" on that machine.
Seems to me to be 32-bit issue.
Editing this post:
I just seen a possible answer...Do you have roboform installed (in the taskbar also)? If so, try disabling it or removing it and try to start again. I said above that I have 2 units and on the one (32-bit) I have Roboform installed and it crashes, but on the other one I don't...so go figure.
According to the report I read, if you upgrade Roboform it should be OK, although I have not tested as of yet...I am still at work...
Hope that helps...
Maybe you are looking for
-
Hi - I keep receiving the following error message on a song I purchased from itunes and am now trying to drag and drop to my iPad: "you must download items from icloud before you can copy then to iPad" what does this mean - please help! Thank you
-
Grey line and box won't go away
When I expand the content width of each page, the content space expands, but a gray line is left vertically down the entire length of the page where it previously ended. Also, there's a gray box at the bottom. I can't get rid of either of these...any
-
Set "E" for V1801 Message: Pricing error: Mandatory condition ZR01 missing
Dear All, I want to set below error message to appear as ERROR. Right now this message appear as a GREEN Color message. Therefore user can save the sales order without pricing. My requirement is to BLOCK the user from entering a sales order in to the
-
Hi All, Could any one throw some light on the paymnet method and the form details for effecting ACH and Wire Payment? Can I use the method under F110 Program ? Thanks, Chitra
-
Allowfullscreen & wmode="transparent" doesn't work together
allowfullscreen & wmode="transparent" doesn't work together with IE 6.0, fullscreen doesn't work anyone know why??