Vista x64 and Beamer (VGA)

Hi,
i tried to connect a Beamer over my "MiniDisplay Port -to- VGA" Cable but i only get a resolution of 640x480 ... i need 1024x768 ... can't change the res in the nivida nor the vista control planel..
..under macOS i have all resolutions aviable..
Are there any new nvidia drivers for vista x64 ... for the macbook's (late 2008) 9400M?

Sometimes there seems to be problems with upgrading firmware on 64bit Operation systems, I had the same problem with both my Logitech G5 and Razer Deathadder mouses. So my tip is you try upgrading it on Vista 32bit or Windows XP 32bit.

Similar Messages

Vista x64 and Microphone not work

Hi folks,I've installed and am running Vista x64 and the sound is working fine but the mic is misbehaving. In the 'Speakers Properties', 'Levels' tab, I have the microphone set to 85 and unmuted. This way the microphone works but I get bad feedback and I have to listen to myself droning on through the speakers. I've tried muting & unmuting this but nobody can hear me speaking in Teamspeak. Am I condemned to having to blast my neighbours with feedback or is there a way I can talk through the mic and have my voice come through on Teamspeak instead of coming through my speakers Many thanksPete P.S. System is a 4gig, dual core, Audigy 4Drivers are the latest Vista ones from the creative site.Oh and it all worked fine on XP by the way

Go to recording properties, select levels and increase mic to 85. Also add 20db boost.go to speaker properties, select levels tab and mute the microphone.....Fixed..

Vista x64 and fimware upd

I have Vista x64 and a Zen V
When I try to update the firmware of the player I get the massage that there is no Zen connected when it is and it is visible in explorer (as My Zen).
The driver seems OK
Anyone with an idea how to solve this problem?

Sometimes there seems to be problems with upgrading firmware on 64bit Operation systems, I had the same problem with both my Logitech G5 and Razer Deathadder mouses. So my tip is you try upgrading it on Vista 32bit or Windows XP 32bit.

Problem with Vista x64 and Audible in iTunes

I've made a clean install of Vista x64.
Installed iTunes and started it off reloading my music. When it came to .aa files from Audible it prompted me for my audible login - which I gave. It then rejected my login and skipped all my audible stuff.
I've now tried several times to completely wipe iTunes from my system and reinstall it (even tracking down all the config stuff it installs and doesn't remove on removal) and still have no luck. I've also tried the vista permissions fix.
Problem is iTunes seems to think it's authorized on Audible as I have a 'DeAuthorize Audible account' option under advanced. If I enter my login under this, or when prompted when trying to add an Audible file I get a "Could not authorize this computer because an error occurred (-44012)" error message.
Anybody have any clue about this, because google hasn't.

I believe that's just to fix permissions if you can't play back music you've purchased from the music store.
I did try running it anyway, just to see if it made any difference, it didn't.

Vista x64 and 4GB Issue resolved? nforc

Ok, i have a fatalty card and its in a 2nd computer since i got the popping noises with previos drivers, but now with this new one i have hope ^^
ok my question, has anyone tested the Fatalty (or any other X-Fi) on vista x64 with 4gb+ ram? on an nforce4 board?
i have an ASUS A8N SLi-SE board with 4gb of pc3200 (423 MHz) << i know its nforce4, but i want my 20$ inverstment to work
ps> first post here! im new woot ?
EDIT>> I dont have sli, i just have 8800gt xxx, and no nforce mobo drivers installed...
Thnks in Advance,
Munky
Message Edited by Munkypoo7 on 03-7-2008 05:27 PM

took the plunge, and the freaking drivers...
WORK!!!!!!!
Its amazing! i can play 242 and crysis without any pops! finally my 20$ invesment is back in order!!!!!
maybe since i never installed any nforce drivers it works for me perfectly?
Thank you Creative!!!!!! It took a while but i love my Sound Card!!!

Vista x64 and iPod Syncing Error (Error -81)

I have Vista x54 and the latest iTunes (7.1.1.5) and just got a brand-new 30GB Video 5.5 a few days ago. I started my sync on my library, but right in the middle I get this error - "Cannot Copy To Disk "IPOD" (-81)" I already restored my iPod several times and even completely removed all traces of iTunes, QT, etc and reinstalled, but to no avail... I've been using iTunes other functionalities for some time now on my Vista x64 just fine... What should I do? Is this a hardware problem - cause this iPod is spankin' new!!

Hmmm. You aren't getting the classic symptoms of the issue, but it might be worth checking for a Windows drive letter confusion on the PC, as per the following document:
Windows confuses iPod with network drive or hard drive and may keep iPod from mounting or songs may seem to disappear

Vista x64 and MacBook Pro 65nm

According to this article: http://support.apple.com/kb/HT1846
..this MacBook Pro 15" model is the only one with Vista x64 drivers: MacBook Pro (15-inch Early 2008).
I have the model from mid 2007, and am wondering why it is not supported?
As far as I can tell almost nothing has changed in regards to hardware, so why wouldn't it be supported?

The 2008 Mac Pro went from EFI32 to EFI64, not sure if that is the main or only reason.
I had to grab 64-bit BootCamp setup elsewhere, as Leopard 10.5.0 retail didn't include those and I wouldn't have support needed for HAL and such.
Apple started using new Intel chips, but that alone doesn't explain an even more glaring question: the latest 2008 iMac has Penryn cpu and would seem an excellent "candidate" for 64-bit Vista, but that model is excluded and not listed in that article.
No one of course that knows can say and just speculating out loud.
Can Vista 64-bit be installed? Probably yes and I think you can find some threads. I started with Vista x64 back in fall '06 pre-beta BootCamp with RC1 of Vista Ultimate but lacked a few things.
I suspect you have 32-bit EFI firmware is the only real reason.

Vista x64 and desktop manager

I had my phone (8100) hooked up and synched perfectly with XP Pro. I recently bought a new notebook with Vista x64. Although 4.2.2 supports Vista 64, the sync is not working. Clicking synchronize just causes the application to sit there. No progress bar or anything. Any input?

Hi and welvome to the forums!
Although you don't get an error message this is the same fix:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB13801&sliceId=SAL_Pub...
Thanks,
If you need more information, please ask!
If not, please resolve the post using the options by the kudos’ star.
Just check the post that had your answer!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Vista x64 and new Macbook..

hi,
i installed Vista x64 on my new ALU Macbook. I also manually installed all x64 drivers from the mac cd. everything fine so far...
i just got the problem that i cant "tab" and rightclick on the trackpad .. only move mousepointer und mechanical leftclick ..
are there any solutions yet?
(need x64 vista because 4gb ram ...)

Hey
Did you install only the drivers or the WHOLE bootcamp? Coz when you install bootcamp you can just double click the icon near the clock (sry I don't know exactly how it's called in English). There is a tab 'Trackpad' and you can change the properties (e.g. to finger right click, moving windows around, touch to do a left click....)

Vista x64 and PCIe X-Fi Titanium Optical Problems

I am running Vista x64 SP and I have the 2.7.0004 drivers installed and when I try to use Dolby Li've or DTS, I can't use because everything says the current device is in use. I can't get optical to work with my Z-5500 speakers. It works fine on my XP SP3 though. I have dual boot XP/Vista x64.
E8400
ASUS Rampage Formula
4GB DDR 066MHz
HIS ATI HD4870
X-Fi Titanium
XP-32bit SP3/Vista Ultimate-64
Logitech Z-5500

something else to check even tho you maby already have done is checking if the checkboxes for full controll of the SPDIF is on in windows 7 (I dont know anything about 2008 so cant comment on that) but i know that that 2 checkboxes need to be checked for the digital sound to pass trough to the analog 6 channel wich is needed for your speakers.
just to be clear were talking about the same checkboxes as im not sure how its called in english exactly.
in windows 7 in the lower right? rightclick ont eh speaker and select playback devices
then select SPDIF out and select properties.
then go to advanced and make sure both checkboxes under exclusi've mode are checked.
from my experience it also highly depends on what program you use as not all movie/mediaplayers decode the digital signal to 6 channel analog correctly.
i myself prefer classic media player and in that program i had to rightclick the screen select the audio options and set to to decode to speakers from spdif.
i not sure how exactly your setup is set up but i know figuring out how everything should be set or even finding some settings is a massi've pain.

What's going to happen to my X-Fi Platinum when I upgrade to Vista x64 and 4 gig of r

Need info fast. Am researching for my new system overhaul and read all the problems with Daniel K, driver support, July drivers, etc. I need to know if these problems have been addressed before i put my Platinum onto my new setup. x48 asus board, 4 gig ocz, vista x64, Radeon 4870x2, z5500. I love my X-Fi, but I won't even bother putting it back in if problems still exist and/or I'm told 'new drivers are on the way'; not an option for a component I paid $300 for.

Creative had nothing to do with DirectSound3D / surround sound issues in Vista. This was all MS. Microsoft removed the hardware layer for DirectSound3D, which prevents apps/games using DirectSound3D from accessing hardware directly. The result is that audio using DirectSound3D is processed on the CPU and will be limited to stereo-only.
Games that don't rely on DirectSound3D will still function normally in Vista. This limitation is for all sound devices, not just Creative.
Creative created a workaround for this so Vista users can still play DirectSound3D games with surround sound. This is ALchemy. ALchemy adds a .dll to each DirectSound3D game you select that will translate DirectSound3D instructions into OpenAL instructions.
OpenAL is an alternati've to DirectSound3D that has been used in games since 2003 or so. OpenAL on Vista is still allowed direct access to hardware and so will use your sound hardware for processing and speaker positioning.
Without something like ALchemy DirectSound3D games on Vista will be limited to stereo output only.
There are also games that use software-only audio rendering like the Miles Sound System that will be unaffected on Vista also. Only games that use DirectSound3D are affected.
EAX is a set of extensions to either DirectSound3D or OpenAL. EAX over OpenAL works fine in Vista, but DirectSound3D games won't be able to enable EAX effects because of Vista's removal of the DirectSound3D hardware abstraction layer.
ALchemy will allow you to enable EAX for these games as well.
For the most part ALchemy works pretty well. On a handful of games you need to do some tweaking (there are four settings you can change, although only two usually require any modification.) And fewer games are coming out that use DirectSound3D anyway, since Vista doesn't fully support it. More modern games are using OpenAL or software-based audio rendering.

Solution for OPML error in SOA suite Startup (Win Vista x64 and older)

h1. Hi Folks!
When installing SOA suite on Vista 64 bit I encountered lots of problems. One of them was the following upon starting the SOA suite:
At 33% in the progress bar, the starter gives an error, returning a question about OPMN.
Caused by: oracle.ias.opmn.optic.OpticBadConnectException: Error connecting to OPMN (is it running?): Connection refused: connect
Being a newbie in this field, I resisted to learn everything (Oracle as part of a course of Busines Process Integration Laboratories at the University) about the works behind the package. Unfortunately, OPMN drove me crazy for days!
The main problem for OPMN is the unability for the system to handle certain issues.
One of the issues: When in a testing environment that is unstable (i.e. a laptop) some issues occur:
* sleep resume is not supported
* hibernation resume is not supported
* restart is not always working for all processes
(tested this with XP32 & XP64 SP2; SP 3; Vista 32 and Vista 64)
The main issue is with OPMN and the services that are started and controlled through it.
A solution for our workgroup has been made:
-create a reset.bat file
-use the following code:
+@echo off+
ECHO Step 1 in the server reset is running: Shutdown OPMN processes
D:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl shutdown
ECHO Please continue the reset sequence by pressing any key
pause
ECHO Step 2 in the server reset is running: Restarting OPMN processes
D:\product\10.1.3.1\OracleAS_1\opmn\bin\opmnctl startall
END
The commands regarding ECHO and the pause break can be omitted, but for supervision it is better to see if all processes are started in working order.
Please note the absolute paths, these are from my personal setup as they are the default from the manual. Adjust if necessary.
As User Account Control (UAC) does interfere a lot with programs in Vista (32 & 64) and from SP3 also with XP, please assign administrator rights to the reset.bat file.
This solution should take care of the "OPMN (is it running?)" issue, without rebooting or cold restarting the server.
Edited by: user10221595 on Oct 6, 2008 9:18 AM

-- self found answer

Vista x64 and ASIO support - X-Fi titanium

Can anyone else verify that ASIO support for the X-Fi Titanium Fatalty card is not currently available for Vista x64? This appears to be the case, contrary to what the product marketing literature suggests.
Thanks.

Is there a walkaround for the Titanium, maybe with a older driver?
There are several walkarounds for XFI. I tried one with my driverpackage, but it didn't work.
No Singature here.

Vista x64 and 6GB RAM?

Howdy,
I've had the new 2.8GHz 8 Core Mac Pro since launch, and only, today, got another 4GB of RAM for it, bringing it to a total of 6GB.
Well upon installing the RAM, OS X saw all 6GB of ram which was great, but my Boot Camp installation of Windows Vista Ultimate 32bit only saw 2GB. I didn't know about this issue originally, but found out about it then
I have the Retail copy of Vista Ultimate, therefore I have the 64bit version sitting here, but my question is, how much of my 6GB ram would I see if I installed the 64bit version of Vista? Would I still only see 2GB... or may I even see the full 6GB?
Any help will be appreciated, I don't want to waste time installing the 64bit version, if it will only see what the 32bit version does!
ta
Steve

See http://discussions.apple.com/thread.jspa?messageID=6245994&#6245994
But all I know is that XP Pro (32 bit) sees 3 of my 4GB on my MBP.

Trouble with USB Printer/Scanner on Vista x64 and Airport Extreme

I recently just purchased the Airport Extreme and set up my wireless network. I had a little trouble setting up my printer on my PC workstation, but finally realized I needed to download Bonjour for Windows 64-bit to get it working since I was using Vistax64. So now its working. However, I have an HP PSC 2510 Photosmart all-in-one printer/fax which also containes a scanner. Is there any way to get the scanner working on this for either my MacBook Pro or preferably on my Win Vista PC? I see no option to allow for this. If anyone can help or point me in the right direction, I would very much appreciate it. Thank you.

Hello Ambien. Welcome to the Apple Discussions!
Is there any way to get the scanner working on this for either my MacBook Pro or preferably on my Win Vista PC? I see no option to allow for this. If anyone can help or point me in the right direction, I would very much appreciate it.
Unfortunately, none of the "advanced" functions (scanning, copying, faxing, etc.) of multi-function printers are supported by the USB port of any of the AirPort base stations.

Vista x64 and Beamer (VGA)

Similar Messages

Maybe you are looking for