VISTA x64, BSOD and WUDFRD.SYS

saw the same problem on some threads from as far back as 1yr ago.why is nokia doing nothing to fix this?

It's not Nokia who is responsible for causing the blue screen, it's Microsoft.
WUDFRD.SYS = user mode driver.
Most of the time the blue screen will also show the errorcode: 4549bdbd
The solution:
Install service pack 1, it will solve this related BSOD.
With kind regards,
Bas van Beek
post edited by moderator *web link removed*
Message Edited by kladiron on 14-Apr-2008 10:41 AM
With kind regards,
Bas van Beek
www.fanaticwebservice.com

Similar Messages

Vista x64, CMSS, and Distortion Problems with Audigy Z

I have an Audigy ZS 2 Plantinum, and I recently upgraded from XP x86 to Vista x64. With XP, I had no problems with the most recent drivers. I used CMSS-3D to output to all my speakers, mainly to make my music sound better when I played it (so it surrounded me, not just in front, even though its just Stereo).
Well, after trying to install the drivers for Vista x64 and having a ton of difficulties getting it to even set to 5. speakers, whenever I have CMSS turned on, sounds within programs are scratchy/distorted (such as Aol Instant Messenger). Music is fine (I use MediaMonkey), and those sound .wav's from programs play fine when opened on their own in MM or WMP. When I turn CMSS off, there is no distortion.
Does anyone have a solution for this I would like to have music played through all my speakers, but I am always using other programs when listening to music and I don't want their sounds to be distorted.

If anyone else is having similar problems: For me it seems to be an incompatibility between Creative Audigy 2 ZS drivers and Philips amBX set drivers. I've started a thread on the amBX forums : http://ambx.com/forum/viewtopic.php?f=9&t=3797
I still need help to fix these problems.

Vista x64 and PCIe X-Fi Titanium Optical Problems

I am running Vista x64 SP and I have the 2.7.0004 drivers installed and when I try to use Dolby Li've or DTS, I can't use because everything says the current device is in use. I can't get optical to work with my Z-5500 speakers. It works fine on my XP SP3 though. I have dual boot XP/Vista x64.
E8400
ASUS Rampage Formula
4GB DDR 066MHz
HIS ATI HD4870
X-Fi Titanium
XP-32bit SP3/Vista Ultimate-64
Logitech Z-5500

something else to check even tho you maby already have done is checking if the checkboxes for full controll of the SPDIF is on in windows 7 (I dont know anything about 2008 so cant comment on that) but i know that that 2 checkboxes need to be checked for the digital sound to pass trough to the analog 6 channel wich is needed for your speakers.
just to be clear were talking about the same checkboxes as im not sure how its called in english exactly.
in windows 7 in the lower right? rightclick ont eh speaker and select playback devices
then select SPDIF out and select properties.
then go to advanced and make sure both checkboxes under exclusi've mode are checked.
from my experience it also highly depends on what program you use as not all movie/mediaplayers decode the digital signal to 6 channel analog correctly.
i myself prefer classic media player and in that program i had to rightclick the screen select the audio options and set to to decode to speakers from spdif.
i not sure how exactly your setup is set up but i know figuring out how everything should be set or even finding some settings is a massi've pain.

Vista X64 Drive Management Snap-In Error with SD Cards

I have someone with an W700, 2752-3KG, running Vista X64, raid 1 configuration with factory image. The system also has a VM with XPP X86 in case it proves relevant.
Everything works like a dream, except for one thing which has got us completely stumped. When an SD card is inserted it is recognized as new hardware as expected. There is no autorun, i.e. Open folder / play music window, as this was disabled when the VM was set up. In drive management the SD card will be shown, but alas not assigned a drive letter. Any attempt to assign a drive letter results in the following message; (translated from German to English using translate.google.com)
"The operation could not be completed because the view
of the Disk Management snap-ins is not current. Refresh your view with the
update task. If the problem persists, close the Disk Management snap-in, and
then restart the Disk Management snap-in or the computer."
[Original screenshot attached 203KB]
The usual routine of updating / rolling back of drivers, uninstalling the hardware etc. etc has been tried to no avail.
The SD cards work fine on other TPs including W700s with Vista X64, X86 and XPP X86, they also work fine on this system when using an USB card reader
What hasn't been tried is running a recovery to another hdd. As the system is used daily this would mean blowing part of a weekend. And if a weekend is going to be partly blown, then I'd rather blow it completely and reinstall everything from scratch which would be a shame because, as previously stated, everything else is running 110%.
Has anyone experienced similar? Any ideas? I've searched MS thoroughly without finding anything
Thanks in advance
Edit; Typo
Message Edited by andyP on 04-20-2009 10:10 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Attachments:
snapinerror.jpg ‏204 KB

You may want to try a few different SD cards, there are apparently some which do not play well with Vista.
Personally I haven't had any issues with a 2GB SanDisk SD card running as ReadyBoost in an X61 under Vista Ultimate x64.
Cheers,
Bill
I don't work for Lenovo

Windows Vista 64 Bit and Button Support - Qosmio G30?

Windows Vista 64 Bit and Button Support?

Everybody claiming that Vista x64 (or Ultimate) can't be used with FN keys or Flash Cards is utterly wrong!
I have a Qosmio G30 running Vista x64 Ultimate, and have both FN keys, Toshiba Flash Cards and (partly) the hardware buttons at the top working.
After a lot of research, I found that Toshiba has released a 64-bit version of VAP called util_tvap_27581D. If you google it, you might discover it...

Windows VISTA x64 ramdomly force-shut Premiere before it starts

Hi,
I just upgraded to Vista x64 Ultimate and all is updated and shiny new with Premiere CS2 and CS3 installed and Master COllection CS4 trial.
The problem is that Vista will sometimes runs CS3 well (always CS2), but it sometimes gives me the Windows will shut down the software.
At first I thought it was CS4 so I installed it but it still does it sometimes then stops and then again.
thank you for your help.

try opening the project, clicking OK when it tells you that the scratches are write protected, and then when it opens, go to the top menu bar and click Project > project settings > Scratch discs and re-point your scratches to the location you want them. Save, and you should be good to go.

Vista x64 bit GUI "Quirks"

Has anyone else running a 64 bit version of Vista experience weird GUI issues in iTunes 8? Mine range from disappearing minimize,maximize and close buttons to when iTunes loads up it's all black (issue was also in iTunes 7 as well).
Message was edited by: Gearz1701

Yes, I'm running version 8.0.1 of iTunes on Windows Vista x64 Ultimate and have a lot of problems like those you described. I haven't noticed such problems with earlier versions of iTunes.
-Steff1

Vista x64 drivers needed for Satellite U200

Hello,
has anyone installed Vista x64 on the satellite U200? I want to change now to 64 bit, will upgrade to 4 GB memory as well.
Has anyone experience with the drivers that work? For chipset, wireless and graphics there is no problem. For the fingerprint I have as well. But how is it with the Value Added Package? Is this compatible with x64 and the Flashcards as well? Someone tried to install??
Thanks for answers!
snipe

Hello again! I changed to Vista x64 now - and what shall I say!!! WOW! It is two times faster then the old x86! Cannot believe it!
And I got nearly everything working, except the toshiba value added package - so I do not have the flashcards and the wireless changer - but I can wait - hope they fix this. Everything else works:
-fingerprint
-graphicscard
-wireless
-lan
-logitech mouse
-bluetooth (even switched to windows stack now for compatiblity reasons with logitech and nokia suite)
-toshiba assist works
-touchpad works, with scroll and so on
yeah thats it so far - and I am happy - did not expect so much! Try it yourself!
Greetz
snipe

BSOD Vista x64 After Waking from Sleep

Hi. I recently re-installed my OS after purchasing a new MB (ASUS P8277-M LGA 1155). I in stalled a fresh (/mbr format) copy of WIN Vista x64. After my computer awakens from sleep mode a BSOD occurs. I've tried troubleshooting the issue with winDBg; however,
I cannot resolve the issue. The output from my dump file is below. Please let me know the next steps I should take to resolve this issue.
Thanks,
Chris
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\Mini021214-02.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6002.18881.amd64fre.vistasp2_gdr.130707-1535
Machine Name:
Kernel base = 0xfffff800`01c15000 PsLoadedModuleList = 0xfffff800`01dd9e30
Debug session time: Wed Feb 12 19:04:50.893 2014 (UTC - 6:00)
System Uptime: 0 days 10:27:05.946
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck F4, {3, fffffa800c74a710, fffffa800c74a948, fffff80001ea5870}
Probably caused by : csrss.exe
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa800c74a710, Terminating object
Arg3: fffffa800c74a948, Process image file name
Arg4: fffff80001ea5870, Explanatory message (ascii)
Debugging Details:
PROCESS_OBJECT: fffffa800c74a710
IMAGE_NAME: csrss.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MODULE_NAME: csrss
FAULTING_MODULE: 0000000000000000
PROCESS_NAME: csrss.exe
EXCEPTION_CODE: (NTSTATUS) 0x114adbb0 - <Unable to get error code text>
BUGCHECK_STR: 0xF4_114ADBB0
CUSTOMER_CRASH_COUNT: 2
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
CURRENT_IRQL: 0
STACK_TEXT:
fffffa60`023421a8 fffff800`01f6cb63 : 00000000`000000f4 00000000`00000003 fffffa80`0c74a710 fffffa80`0c74a948 : nt!KeBugCheckEx
fffffa60`023421b0 fffff800`01f1c380 : fffffa80`114adbb0 fffffa80`114adbb0 fffffa60`02342c20 fffffa60`02342a40 : nt!PspCatchCriticalBreak+0x93
fffffa60`023421f0 fffff800`01ec2a98 : fffffa80`114adbb0 00000000`00000008 fffffa60`02342c20 00000000`00000008 : nt! ?? ::NNGAKEGL::`string'+0x103a6
fffffa60`02342240 fffff800`01c6bbf3 : fffffa80`0c74a710 fffffa80`114adbb0 fffffa60`02342320 fffffa60`02342c20 : nt!NtTerminateProcess+0xd8
fffffa60`023422a0 fffff800`01c6c100 : fffff800`01cce59d fffffa60`02342b78 fffffa60`02342ca0 fffffa60`02342c20 : nt!KiSystemServiceCopyEnd+0x13
fffffa60`02342438 fffff800`01cce59d : fffffa60`02342b78 fffffa60`02342ca0 fffffa60`02342c20 00000000`014915a0 : nt!KiServiceLinkage
fffffa60`02342440 fffff800`01c6bfa9 : fffffa60`02342b78 00000000`00005d2c fffffa60`02342c20 00000000`01491ba8 : nt! ?? ::FNODOBFM::`string'+0x2942c
fffffa60`02342a40 fffff800`01c6ada5 : 00000000`00000000 fffffa60`02342ca0 00000000`00000001 00000000`00005d2c : nt!KiExceptionDispatch+0xa9
fffffa60`02342c20 00000000`7767320e : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x1e5
00000000`014914c0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7767320e
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
FAILURE_BUCKET_ID: X64_0xF4_114ADBB0_IMAGE_csrss.exe
BUCKET_ID: X64_0xF4_114ADBB0_IMAGE_csrss.exe
Followup: MachineOwner

cperry11
9 of 11 were related to memory corruption. Please run these 2 tests
These crashes were related to memory corruption (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you dont
know what it is you probably are not overclocking.
1-Memtest. (You can read more about running memtest here)
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
Boot from the CD, and leave it running for at least 5 or 6 passes.
Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.
Test the sticks individually, and if you find a good one, test it in all slots.
If a known good stick fails in one motherboard slot but not another it is probably the slot.
2-Driver verifier (for complete directions see our wiki here)
Using Driver Verifier is an iffy proposition.
Most times it will crash and it will tell you what the driver is, but sometimes it will crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).
Here is the procedure:
Go to Start and type in "verifier" (without the quotes) and press Enter
Select "Create custom settings (for code developers)" and click "Next"
Select "Select individual settings from a full list" and click "Next"
Select everything EXCEPT FOR "Low Resource Simulation"
For Win 8 dont check Concurrency stress test, and DDI compliance checking click "Next"
Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
Select "Finish" on the next page.
Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

ITunes and Windows 7 (or Vista) x64

Hey there,
the current state with syncing my iPod under Windows Vista x64 and Windows 7 (RC) x64 is horrible. iTunes locks itself up for several minutes, syncing large Music libraries takes hours - and might break halfway through the progress. It's a shame that I have to experience such lacky behaviour from Apple Products.
Having ordered an iPhone 3Gs, I wonder if I'll experience the same trouble with it.
Will Apple make it to provide a working sync solution for Windows 7 x64?
Windows 7 is no longer pre release, so it's time to take some action. You should've downloaded the RTM copy of Windows 7 x64 already, MobileDeviceDriver Team.
Pretty Disappointed
Stefan

Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
what typically works with the 2380s on 64-bit OSs (it hits XP too) is reinstalling the 64-bit version of the GEAR drivers that iTunes uses for burning and importing.
the GEAR drivers are available from the following page. note that there are two different versions of the 64-bit driver, so be sure to get the one that matches your hardware:
GEAR drivers

Webcam NX and Windows Vista x64

To whom who can solve this problem,?I have now been testet the Vista x86 and Vista x64. In the x64 it doesn't install my Creative Webcam NX camera. It just finds it as an "unknown device", but in the x86 version it finds it during install and it works fine. Anyone who can help me out here? Because it seems like there will be no development of specific x64 vista drivers for this products. Thanks in advanced?\Thomas Hansen

I sadly have the same issue. It appears that there will be no x64 driver for the Creative Webcam NX. Due to the lack of support, I plan on purchasing 35?different BRAND of webcams for my new computer lab. Creative has lost my business.

Another CS4 and Vista x64 GPU SLi Support Question

After reading some of the forums I could not really find a clear answer on the following:
I am running Vista x64 Ultimate on a QX6850 system with 8GB of RAM. I also have 2x XFX8800GT graphics cards running in SLi with the latest Nvidia drivers (181.20). Dxdiag testing provides no errors.
The GPU support features in CS4 x64 (and x32) is greyed out with the text wording of no support in Photoshop standard. Based on some of the threads posted here, I tried enabling or disabling some settings in the Nvidia control panel, but the only one that seem to enable the GPU support is to deactivate SLi completely (which sort of defeats the purpose in 3D graphics).
Does CS4 support an SLi setup? If not, will there be any difference in performance with SLi disabled and using the CS4 GPU support vs the other way around?
Thank you for your assistance.

Negitive. It is written on the CS4 requirements section. Only 1 GPU.

IPhone 3G and Outlook 2007 sync Vista x64

Hi,
I pre-ordered two iPhone 3G a week ago (still not received them) and then went online to read user opinions about it. and, honestly, the scared me.
First, battery life. I'm Samsung SCH-i760 (Verizon) smartphone user and I'm pretty happy with it. With small battery it last the whole day - some browsing, some phone calls and some software which I have installed on it like my database application which syncs with my PC (CodeWallet). I red that iPhone 3G should be charged at least twice a day otherwise you'll risk to stay without it in the afternoon.
and
Second, most important for business-oriented user like me - I'm Outlook-addicted and use it all the time for contacts, tasks and appointments, and I do it on both smartphone and my PC with Vista 64-bit.
So my question is does anybody tested it on Vista x64? Does the Outlook problem with sync exists on this OS version also? Although MS Office 2007 is 32-bit application it work on 64-bit OS and uses different drivers/application to communicate with devices. I simply cannot spent days playing with issues like this....and will stay probably with my existing provider (Samsung is Windows Mobile 6 device and there is no problems sync anything with any Windows).
Thanks.

Sorry, I can't help with Outlook 2007 although I use MS Exchange with Outlook 2003 SP3 with not troubles.
You cannot save files to the iPhone and I wouldn't expect this in the new 3.0 firmware. There are several apps that allow you to save/access files from your home computer or a cloud server. I use Box.net.
Message was edited by: paulcb
Message was edited by: paulcb

Problem with Vista x64 and Audible in iTunes

I've made a clean install of Vista x64.
Installed iTunes and started it off reloading my music. When it came to .aa files from Audible it prompted me for my audible login - which I gave. It then rejected my login and skipped all my audible stuff.
I've now tried several times to completely wipe iTunes from my system and reinstall it (even tracking down all the config stuff it installs and doesn't remove on removal) and still have no luck. I've also tried the vista permissions fix.
Problem is iTunes seems to think it's authorized on Audible as I have a 'DeAuthorize Audible account' option under advanced. If I enter my login under this, or when prompted when trying to add an Audible file I get a "Could not authorize this computer because an error occurred (-44012)" error message.
Anybody have any clue about this, because google hasn't.

I believe that's just to fix permissions if you can't play back music you've purchased from the music store.
I did try running it anyway, just to see if it made any difference, it didn't.

KeyAgent and MacHAL didn't install when installing Vista x64

Hi All,
I have seen a couple of sketchy posts about this, but nothing that really explains what's going on here.
I tried a clean install of Vista x64 last night on BootCamp, and I loaded the new Mac Pro BootCamp drivers than are available for download on the web (they are supposed to support x64 now).
I got two errors... KeyAgent and MacHAL wouldn't install. As some people have mentioned, the installation said I didn't have the correct permissions.
Anyway, the installation proceeded when I selected 'ignore' to these errors... and on the face of it, all seems well with my Vista installation.
However, question is, what do KeyAgent and MacHAL do...?? Do I need them...?? Is there a way I can get them installed...?? Etc..
Many Thanks

Hi, Just hit the same problem with installing Vista Ultimate x64. KeyAgent & MacHAL failed to start, did the ignore and everything looked OK. Installed the Mac drivers, but no Bluetooth, Airport etc, plus the BootCamp control panel and system tray were missing.....
Removed the BootCamp partition completely and reinstalled this time with x32 version of Vista,
no problems at all, Mac drivers load and everything works. Hate having to corrupt my first Mac in 8 years, but need Windows for specific PC applications.
As a side note. I had to create a 50Gb partition, due to file sizes. Downloaded MacDrive7 from MediaFour, absolutely brilliant. Lets me see the Mac Partition and my Mac 750Gb Seagate backup from Windows. One small issue, when you load software that has both Mac & PC installs, if MacDrive is turned on you can't see the PC install. Workaround - disable MacDrive7, reboot, PC version installs OK and then reset MacDrive7.
Cheers

VISTA x64, BSOD and WUDFRD.SYS

Similar Messages

Maybe you are looking for