Vista X64 Drive Management Snap-In Error with SD Cards
I have someone with an W700, 2752-3KG, running Vista X64, raid 1 configuration with factory image. The system also has a VM with XPP X86 in case it proves relevant.
Everything works like a dream, except for one thing which has got us completely stumped. When an SD card is inserted it is recognized as new hardware as expected. There is no autorun, i.e. Open folder / play music window, as this was disabled when the VM was set up. In drive management the SD card will be shown, but alas not assigned a drive letter. Any attempt to assign a drive letter results in the following message; (translated from German to English using translate.google.com)
"The operation could not be completed because the view
of the Disk Management snap-ins is not current. Refresh your view with the
update task. If the problem persists, close the Disk Management snap-in, and
then restart the Disk Management snap-in or the computer."
[Original screenshot attached 203KB]
The usual routine of updating / rolling back of drivers, uninstalling the hardware etc. etc has been tried to no avail.
The SD cards work fine on other TPs including W700s with Vista X64, X86 and XPP X86, they also work fine on this system when using an USB card reader
What hasn't been tried is running a recovery to another hdd. As the system is used daily this would mean blowing part of a weekend. And if a weekend is going to be partly blown, then I'd rather blow it completely and reinstall everything from scratch which would be a shame because, as previously stated, everything else is running 110%.
Has anyone experienced similar? Any ideas? I've searched MS thoroughly without finding anything
Thanks in advance
Edit; Typo
Message Edited by andyP on 04-20-2009 10:10 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Attachments:
snapinerror.jpg 204 KB
You may want to try a few different SD cards, there are apparently some which do not play well with Vista.
Personally I haven't had any issues with a 2GB SanDisk SD card running as ReadyBoost in an X61 under Vista Ultimate x64.
Cheers,
Bill
I don't work for Lenovo
Similar Messages
-
I need vista x64 driver for my pc-cam 900
I have same problem with Mandaraku who posted 04-20-08. Please help me too.
I have a Camara PC CAM 900 since 2005. It lost the software installation. I can not download on the site CREATIVE. Urgently need to install this chamber in my new computer. How do I get to download installation of this driver? I use Windows XP. -
[ODBC Driver Manager] Function sequence error
Hi all,
i´m trying to built an webservice and if i try to run my code i get following
error: [ODBC Driver Manager] Function sequence error .CAn someone tell me what
this means?
Here comes my code:
static String Daten(int Nummer)
java.sql.Connection conn = null;
java.sql.Statement stmt = null;
try
Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,
"t3://localhost:7001");
// Get a context for the JNDI look up
ctx = new InitialContext(ht);
javax.sql.DataSource ds
= (javax.sql.DataSource) ctx.lookup ("webservice-data-source");
conn = ds.getConnection();
System.out.println("Making connection...\n");
// execute some SQL statements to demonstrate the connection.
stmt = conn.createStatement();
System.out.println("Vor ResultSet");
ResultSet result = stmt.getResultSet(); //Bringt Fehler
final Vector erstespalte = new Vector();
final Vector zweitespalte = new Vector();
final Vector drittespalte = new Vector();
final Vector Zeilen;
final Vector end = new Vector();
try {//2.Block
stmt.executeQuery("Select * from Person where Kundennummer=5");
while(result.next())
erstespalte.add(result.getObject(1));
zweitespalte.add(result.getObject(2));
drittespalte.add(result.getObject(3));
Zeilen = new Vector();
for(Enumeration a = erstespalte.elements() ; a.hasMoreElements()
for(Enumeration b = zweitespalte.elements() ;b .hasMoreElements()
for(Enumeration c = drittespalte.elements() ; c.hasMoreElements()
Zeilen.add(a.nextElement());
Zeilen.add(b.nextElement());
Zeilen.add(c.nextElement());
end.add(Zeilen);
}System.out.println(end);
result.close();
}//2.try-Block
catch (SQLException e) {
System.out.println(e);
}//1.try-Block schliessen
catch (Exception e) {
System.out.println("Exception was thrown: " + e.getMessage());
finally {
try {
if (stmt != null)
stmt.close();
if (conn != null)
conn.close();
catch (SQLException sqle) {
System.out.println("SQLException during close(): " + sqle.getMessage());
}//finally-Block schliessen
return ("HAllo");
}//Methode abschliessen
Thank you very much for helping !!!Please post this in the JDBC newsgroup: weblogic.developer.interest.jdbc
Also, please include your full error message.
-- Rob
Hakan wrote:
Hi all,
i´m trying to built an webservice and if i try to run my code i get following
error: [ODBC Driver Manager] Function sequence error .CAn someone tell me what
this means?
Here comes my code:
static String Daten(int Nummer)
java.sql.Connection conn = null;
java.sql.Statement stmt = null;
try
Context ctx = null;
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFactory");
ht.put(Context.PROVIDER_URL,
"t3://localhost:7001");
// Get a context for the JNDI look up
ctx = new InitialContext(ht);
javax.sql.DataSource ds
= (javax.sql.DataSource) ctx.lookup ("webservice-data-source");
conn = ds.getConnection();
System.out.println("Making connection...\n");
// execute some SQL statements to demonstrate the connection.
stmt = conn.createStatement();
System.out.println("Vor ResultSet");
ResultSet result = stmt.getResultSet(); //Bringt Fehler
final Vector erstespalte = new Vector();
final Vector zweitespalte = new Vector();
final Vector drittespalte = new Vector();
final Vector Zeilen;
final Vector end = new Vector();
try {//2.Block
stmt.executeQuery("Select * from Person where Kundennummer=5");
while(result.next())
erstespalte.add(result.getObject(1));
zweitespalte.add(result.getObject(2));
drittespalte.add(result.getObject(3));
Zeilen = new Vector();
for(Enumeration a = erstespalte.elements() ; a.hasMoreElements()
for(Enumeration b = zweitespalte.elements() ;b .hasMoreElements()
for(Enumeration c = drittespalte.elements() ; c.hasMoreElements()
Zeilen.add(a.nextElement());
Zeilen.add(b.nextElement());
Zeilen.add(c.nextElement());
end.add(Zeilen);
}System.out.println(end);
result.close();
}//2.try-Block
catch (SQLException e) {
System.out.println(e);
}//1.try-Block schliessen
catch (Exception e) {
System.out.println("Exception was thrown: " + e.getMessage());
finally {
try {
if (stmt != null)
stmt.close();
if (conn != null)
conn.close();
catch (SQLException sqle) {
System.out.println("SQLException during close(): " + sqle.getMessage());
}//finally-Block schliessen
return ("HAllo");
}//Methode abschliessen
Thank you very much for helping !!! -
PROBLEM RESOLVED: SATA RAID Vista x64 Driver Errors on P45 Platinum
I have installed 5 WD 640GB SATA drives on my P45 Platinum PC build. Using the Intel Matrix Storage BIOS program, I configured them as RAID 0 (480 GB) and RAID 5 (2 TB) volumes.
Now I am trying to install Vista (x64)--as expected, the Windows installer prompts me for a RAID driver floppy. I have downloaded the latest ICH10R drivers from the MSI Website and copied them to a USB key--the installer detects the drivers on the key but when I click Next, I get the following error message: "No new devices could be found. make sure the driver files are correct and loaded on the driver installation media."
Can anybody help--I'm fresh out of ideas?
The P45 Platinum board is a rev 1.1. I have not flashed the BIOS so I suspect that it is v1.0 but am not sure how to confirm this.Quote from: Jack the Newbie on 30-October-08, 17:39:54
When one of the board's controllers is set to RAID mode, it does not even matter if there are actually hard drivers connected to it, or not. Vista is not attempting to locate a RAID volume but simply needs proper drivers to be able to initialize the controller.
OK, makes sense. So when Vista was prompting me for drivers it was actually looking for the JMicron RAID drivers NOT the Intel RAID drivers. When I tried to install the Intel RAID drivers it--naturally--gave an error message.
It seems that it is no longer necessary to install Intel RAID drivers when you install Vista as these are already available to the OS (must be on the DVD). -
WD Drive Manager Services component error message MyBook Studio Edition II 2TB on iMac
For five months I have been using a WD MyBook Studio Edition II 2TB in RAID 1 mode on a 27" iMac i7, 2.93 GHz, running Mac OS X 10.6.7, as a Time Machine connected via FW800. Initial installation and operation was all good.
Recently, the blue WD logo disappeared from the menu bar. I reinstalled the WD Drive Manager version 2.25 from the installation disk. The logo reappeared, however when selecting Launch WD RAID Manager from the menu an error message appears:
"The WD Drive Manager Services component could not be found. Make sure the Drive Services component is running first."
I removed the WD Drive Manager with the installation disk and reinstalled and tried again. No good.
Tried again, this time using the USB connection with the same result. No joy.
Tried using the downloadable version (2.25) from the WD website with same results.
Searching Google lead to no hits on anything remotely related for a solution.
So, at this point, I cannot confirm that the drive is actually in RAID 1 mode. It shows up in the Finder as a 1TB drive with 268 GB used.
How can I restore a working version of the WD Drive Manager?
WD Tech Support has escalated the issue to programmer level but without a successful solution. They suggested I post here as well to see if any other Mac users may have had this problem and have found a solution.
Thanks for any assistance or referral.Unfortunately you probably will not find very many if anyone using WD Drive Manager here, most of us are using a variety of backup strategies that include Time Machine, an on-line backup and a Bootable Clone made with CarbonCloner or SuperDuper.
The no-worry backup plan | Business Center | Working Mac | Macworld
Dennis -
Satelite A300-1GN and Vista x64 driver support
Hi,
I am (happy?) owner of this model for 2 days.
However it seemes logically that if this notebook can support up to 8GB RAM (i bought with 4GB) there should be possibility to install x64 operating system.
It seems, but it's not like I see. There are no drivers for x64 MS Systems on Toshiba official website to download.
Well, I am able to understand you do not want to support Win XP x64, because this system is getting older.
I can not understand how it's possible that every large company supports Vista x64 for their devices and Toshiba do not.
It seems perverse that you do not deliver suitable drivers and I really can't believe that.
I am wonder and i hope the main reason is that product I own is a new model and the drivers appears soon.
E.g. Satelite A200 has x64 support despite its a lower and weaker model...
I hope we can expect that our doubts will be explaining, and Toshiba will not slight their custommers longer, but will incline to our requests.
If I am mistaking of looking for needed drivers, then want to apologize for my post,
but if I am not wrong I will be satisfied to hear rational answer and ensure that the drivers will comming soon!
regards
KubaWell I really hope it will be.
Mabye can you tell me how long does it usually take to support the drivers for 64bit systems for new model by toshiba?
If I will have to wait e.g. 2 years there will be no sense to wait for them. If does it usually take about few months I will be waiting carefully.
Or mabye somebody can give me advice if there is a sense trying to find needed drivers on devics producers sites?
Finally my question is, if models having nearly the same devices and configurations like sat a300-1GN and sat a300-15B are probably using the same drivers?
If there are the same graphic cards the same webcam the same loudspeaker? :)
Is there any sense to try drivers for this devices for sat a200 series?
I am sure i will try to install Vista x64 for few days so i am satisfied for all tips i will get here.
Greetings,
Kuba -
I'm getting a new motherboard tomorrow so I'll need to reinstall Windows. ive been using Vista 32 off and on since Feb 07, and after SP and the March 08 Creative drivers it's been good enough for my needs that I haven't needed to boot XP. There are still warts, but no showstoppers for my needs.
If I'm going to reinstall I'd like to go x64. ive got 4GB RAM, and I'd like to be able to use it. I really don't need it since all my programs that matter (games mostly) are still 32 bit. It's mostly because I can and I don't really want to reinstall again soon should a 64 bit capable game I want comes out in the near future. I have no 6 bit stuff that matters, so thats not an issue.
Most of my games use OpenAL, otherwise I'd just use the motherboard sound. I play the Battlefield games, WoW, GRAW, UT, All the Half-Life games, Quake series... you get the idea.
My Question is pretty simple, albeit subjective. How are the Creative drivers for Vista x64. It's an Intel P35 chipset, GeForce 9600GT video, and X-Fi Gamer. Any specific gotchas on the new Beta drivers I understand Cmss3d is an issue, but if thats really the only thing I can probably deal with that for a while assuming it'll be fixed (leap of faith there).
Kind of a vague question, and definately subjective. I'm just fishing for experiences before I reformat. Bonus cookie for anyone running dual-boot x86 and x64 on the same computer with a story.Ellimist wrote:
vista x64 drivers are far and ahead of 32bit drivers as they have to be signed and they are alot more controlled.
That's just BS. Just because they have to be signed doesn't make them any better.
Ellimist wrote:
I've found as long as all your hardware is recent then theres no issue with x64 os's its when u want weird stuff that you will get problems. the creative drivers are stable
l myself still have problems with the microphone not working in game mode.
Ellimist wrote:
use Daniel_K vista drivers cd if u can as theres some enhancements there. that and they can also be made to do DDL
DDL was removed from the Daniel_K drivers AFAIK.
Ellimist wrote:
nVIDIA drivers are quite stable on x64 i've found and usually the few bugs i've encountered have now all been fixed with the latest release. i never noticed bluescreens in x64 so i can't comment on the nVIDIA drivers causing them.
l often get bluescreens in DX0 games.
Message Edited by heftig on 06-04-2008 06:42 AM -
I have found a person who has a driver software to connect Labview with a general PCI card. But he says that i need to download a freeware software from NI website to configure the PCI card. But you have mentioned that freeware is for GPIB boards. Is it correct ?? Is there any other way out ??
I would ask the person who told you about the freeware software to help you find exactly where it is. I am not aware of any freeware software for configuring motion PCI cards but maybe the person you know might be able to help you locate it.
-
Error with Credit Card Address
Whenever I try to log onto the itunes store and set up an account to buy music it says my credit card doesn't match my address when it does, I have sent tech support e-mails, but of course they are useless.
One reply by e-mail said to change my info on the myinfo site, but everytime I try to do that it says there was an error, so I can't change the information there either.
It's pretty bad I am wanting to spend money for stuff and the tech support is horrible.I have already checked with the company to make sure the address is the same and it is.
As for the error message, there is no number but I get.
"There was an unexpected error with the application.
This problem has been noted, and an email has been sent to the
administrators.
Please continue with the application.
Thank you for your understanding."
I tried editing my profile several days in a row and I still get this, over and over. -
I tried this morning to download the Macklemore album twice. both times with a card error. However it has posted in my bank account as if the transaction was successful both times. So i was charged twice for the same album of which i never received. Will i be refunded for this "purchase"?
What was the error that you got ?
Does anything show on your account's purchase history ? If you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases (the most recent is above the list).
If you have been charged twice then try the 'report a problem' link to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If you haven't then they might just be temporary store holding charges - from http://support.apple.com/kb/HT3702 :
As with many other merchants, the iTunes Store and Mac App Store places an authorization hold on your payment card account for the approximate amount of any purchase you make.
Authorization holds are removed by your financial institution shortly after your purchase clears. The time it takes to remove authorization requests varies by financial institution. -
I was upgrade to SQL Server 2012 and Visual Studio 2010 was upgraded with SP1 the same day. This is x64 machine.
Microsoft SQL Server Management Studio 11.0.2100.60
Microsoft .NET Framework 4.0.30319.261
Operating System 6.1.7601
Problem 1) With SQL Server Management Studio, selecting "New Query" a warning box is displayed: "The 'Microsoft.Practices.EnterpriseLibrary.Configuration.Design.VisualStudioIntegration2010Package, Microsoft.Practices.EnterpriseLibrary.Configuration.Design.VisualStudioIntegration2010,
Version=1.0.0.0, Culture=netutral, PublicKeyToken=null' package did not load correctly. The problem mayhave been cuased by a configuration change or by the installation of another extension. You can get more information by running the
application together with the /log parameter on the command line, and then examining the file ...\AppDate\Roaming\Microsoft\AppEnv\10.0\ActivityLog.xml'. Continue to show this error message?
Problem 2) In a Query Initellisense works intermittently but most of the time it will not display anything. I have tried Edit|Intellisense|Refresh Cach size and also seperately, Edit | Intellisense | List Members but neither has helped. Also
tried different selections for Tools|options| T-SQL | Intellisense| Maximum Script Size; no luck either.Hi WallyJim,
For your first problem, possible workaround:
In Programs and Features (or Add/Remove Programs), right click the Microsoft Enterprise Library 5.0 Optional Update 1 program and select change. Remove the VisualStudio2010 integration.
Then, install the EnterpriseLibrary Configuration extension from Microsoft via the Extension Manager in VS2010. This will allow you to launch the configuration editor from VS2010, but will not be installed for SSMS.
For more information, please refer to
https://connect.microsoft.com/SQLServer/feedback/details/620532/error-message-on-new-query-window-opening.
For your second problem, the following conditions might affect the behavior of IntelliSense:
There is a code error above the cursor.
The insertion point is inside a code comment.
The insertion point is inside a string literal.
The automatic options are turned off.
For more information, refer to Troubleshooting IntelliSense (SQL Server Management Studio):
http://msdn.microsoft.com/en-us/library/ms173434.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread. -
Xboard 61 and Vista x64 driver problems
I cannot install the driver for my Xboard 61 without this happening. I've done the following:
-run as administrator
-changed the integrity setting to "ON" using BCDEDIT
-run driver setup in an unpacked driver application folder
-checked to see that emuumidi.sys is installed in system32 folder
-re-checked to see that the same Xboard works on my extant XP x32 system (and it does)
I'm at a loss for what to do. Emu has email support now and its hasn't provided any answers.
Here is a copy of what happens to my system. Any suggestions are welcome.
"Creative Device Driver Installation Program has stopped working."
Problem signature:
Problem Event Name: APPCRASH
Application Name: ctzapxx.exe
Application Version: 0.81.2.256
Application Timestamp: 45f79285
Fault Module Name: StackHash_0e2d
Fault Module Version: 6.0.6000.16386
Fault Module Timestamp: 4549d372
Exception Code: c0000374
Exception Offset: 00000000000c87b7
OS Version: 6.0.6000.2.0.0.768.2
Locale ID: 1033
Additional Information 1: 0e2d
Additional Information 2: 543715ab55e3b1a278bfe6a23c62098f
Additional Information 3: 714e
Additional Information 4: 4310375efff8b83f31abee24c8585510Do you have vista service pack 1 installed? That will do it, I think. http://www.microsoft.com/downloads/details.aspx?FamilyId=C21C3978-3B7D-4D64-873B-3C9D26982D7A&displa...
If the link doesn't work, search the microsoft site for update KB936330 (x64 version).
I had many driver problems with all kinds of hardware on my computer with vista x32. I downloaded SP1 (but for x32 version) and all those problems were solved. -
AMS Setup Manager Diagnostics Test erroring with "invalid snapshot" error
While running the Diagnostic Test for Setup Manager on the AMS, it's failing with errors in the below stages.
* Testgroup: CheckEBSHome
* Testgroup: CheckAgentStage
* Testgroup: CheckAgentHome
with below error
Snapshot information is not populated
Any idea?
Regards
SreeOID Setup Diagnostics Test failing due to this 11510 Home Page is redirecting to SSO page, if give login details, i am not able to login to 11510 instance.i created OID user same as 11510 user. i am getting internal server error in the browser.
Thanks,
Panneer. -
The problem we’re having has to do with transitioning our existing Easter I Tunes U site over to an iTunes U Public site as the instructions below tell us to do.
- I can access the itunes U Public Site Manager fine with my ID.
- I was able to make some changes to our existing site to get it ready for publishing it to the iTunes U public site format.
- I can preview our existing site as a new Public Site fine from within the Public Site Manager application.
- However, when I try to Publish it I get an error that says : An error has occurred during the publishing of your content. Try again
Looking for some support to tell me what we’re not doing correctly to migrate our existing site over.
Nick
From: Jay McSweeney [mailto:[email protected]]
Sent: Monday, October 10, 2011 9:07 PM
To: Messina, Nicholas A. (Media Services)
Subject: Re: iTunes U
Nick
Here are the answers
Eastern CT State University is no longer in the iTunes U directory . r
The have not migrated their site to iTunes U Public Site Manager. Starting June 2010 we notified all iTunes U site administrators for any site in the iTunes store that they would need to migrate their existing site to iTunes U Public Site Manager in the future. In Feb. 2011 we notified them that the deadline for migration would be April 2011 and that if they had not migrated their site would no longer appear on the list.
For Eastern CT State University to return to the list, they just need to transition over to an iTunes U Public Site Manager based site. Information on how to do so can be found here -http://deimos.apple.com/rsrc/doc/UsingiTunesUPublicSiteManager/CommonQuestions/c hapter_14_section_2.html#//apple_ref/doc/uid/iTUPSM-CH5-SW2Nick Good ?uestion!
I am the New Admin for The University of New Orleans, and after reading the response to your initial question I think we fall into the category of needing to migrate to Public site manager. But looking at the tutorial which is mainly text, I cannot follow the instructions. Do you have a screen shot of what step two because I cannot find the " iTunes U Public Site Manager in the Tools area."
Thank you!
Message was edited by: LimonNoire -
Promise T3 SATA RAID controller Vista x64 driver OK for W7 x64?
Before I walk down the path of tears again, or at least roll the dice, has anyone used the Vista 64bit drivers for the Promise T3 controller that comes with the K9A2 Platinum on W7 64 bit? And if so, did they work?
From here: http://www.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1332
Thanks,
Anthony
Specs:
Operating System
MS Windows 7 Ultimate 64-bit
CPU
AMD Phenom X4 9550 28 °C
Agena 65nm Technology
RAM
8.0GB Dual-Channel DDR2 @ 333MHz 5-5-5-13
Motherboard
MICRO-STAR INTERNATIONAL CO.,LTD MS-7376 (CPU 1)
Graphics
Generic PnP Monitor on ATI Radeon HD 3870
ATI Radeon HD 3870 (VISIONTEK) 47 °C
ATI Radeon HD 3870 (VISIONTEK) 47 °C
Hard Drives
1000GB MICRONET FANTOM DRIVE IEEE 1394 SBP2 Device (1394)
749GB ATI 1X2 Mirror/RAID1 SCSI Disk Device (SCSI)
Optical Drives
ATAPI DVD A DH20A4P ATA Device
Audio
High Definition Audio Deviceexecutivetechnology, if you have a problem please start you're own new topic instead or resurrecting an old one from 1 1/2 years ago.
>> Please read and comply with the Forum Rules <<
>> Posting Guide <<
Maybe you are looking for
-
My iPod Touch 4g keeps getting a 3194 error when updating to IOS5
I am running the 4.3.3 software on the iPod touch 4g. Tried updating and it download the update perfectly....but when I applied the update it gets to the extraction point but then says Error 3194 and trouble restoring iPod. I tried shift+restore to m
-
Device no longer appears in finder window
When I connect a memory card from a camera to the computer using a card reader connected to a USB port, what used to happen is it would automatically launch iPhoto for possibly importing some or all of the pictures and would the card would also appea
-
How to change AppStore for my iphone4 & ipad2?
Hi, I want to change AppStore to buy apps which are not available in US AppStore. What are the available options with me? Thanks
-
Changing Lighthammer Home in BLS (xMII 11.5)
Hi, I incorrectly set "Lighthammer Home" from BLS>Transactions>System menu, to a server in which i don't have access. So now xMII is not allowing me to login to BLS Transaction editor(or CMS Logic Editor). How to reset "Lighthammer Home" to the previ
-
SAP F&R:: Forecasting at any level other than LOCATION/ PRODUCT- LOCATION
Hi, I am trying to check if F&R has the capability to let me plan the forecasting process at any level other than Location-Product. For example, I wish to execute a WEEKLY FORECAST only at the MERCHANDISE CATEGORY level, for all products defined unde