Vista x64 drivers for Broadcom BCM4311 wlan and touchpad

Hello!
Where to download a Vista x64 driver for a Broadcom BCM4311 wlan and touchpad for a Lenovo 3000 G410m-mm? A Windows update wlan driver allows a two times slower speed.
Regards,
Dmitry

Try this.
//help will save the world

Similar Messages

Anybody found Vista x64 drivers for nVidia GeForce 8600M GT (Macbook Pro)?

These guys at Apple are launching 64-bit Leopard and I still cannot find 64-bit graphics drivers for my laptop under Vista. It makes me sick. Their Boot Camp 1.4 vesion contains only 32-bit drivers.
It's the laptop manufacturer (Apple company) who are responsible for providing me with drivers, not the graphics card manufacturer (nVidia).
I have been waiting for 5 months already and will wait for another 1-2 months and if the drivers don't appear I'm going to sell the laptop because I simply cannot watch DVDs, I cannot play games without properly installed grahics card.
If you have the drivers, please let me know.
Best regards.
Message was edited by: Melnyk

first of all, I think apple will never really "support" windows 64bit...
anyway
try -> http://www.laptopvideo2go.com/
my vista 32bit works with the drivers from this page.
but u need to read the "Quickstart Guide" before you try installing the drivers
cheers

MSI XP Pro x64 / Vista x64 drivers

I was looking at upgrading from Windows XP Pro to Windows XP Pro x64 or Windows Vista Home Premium x64. I was wondering if there is x64 drivers for for either of these two operating systems. I have a RX2600XT Diamond 512DDR4 video card and a K9A2 Platinum Motherboard is on the way. I looked at the hardware driver download pages and I saw a few for the motherboard but video card only has XP/Vista listed. Does that include x64 versions or not?
Do both of these products support XP Pro x64 and/or Vista x64?

Yes.
K9A2 Platinum: http://global.msi.com.tw/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1332
VGA Drivers ==> http://game.amd.com/us-en/drivers_catalyst.aspx

Windows 7 x64 drivers for Hp ENVY 15 u010dx touchsmart

Winodws 7 x64 drivers for HP ENVY 15-u010dx needed.
This question was solved.
View Solution.

You're very welcome.
If the graphics driver works, it should install the drivers for the touchscreen too.
If not, try the one directly from Intel...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24245
I have never tried dual booting an operating system before, so I can't be of much help to you there.
You may however, find this 'how to' guide to dual boot of help.
http://www.pagestart.com/win8dbwin701181301.html

Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.

Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.

I wasn't aware that VueScan charged a yearly license.
You simply launch Image Capture and if the scanner is recognized it will be listed in the SHARED list in the left display column. Select the scanner name and the app will start an overview scan. You will also see a list of scanning options in the right display column (resolution, paper size, file output format, etc.
The above description is when everything is working correctly, which has been the case for me.
Good luck.

Drivers for hp photosmart d5360 and laserjet 4000 in windows 7,needed

i need the drivers for hp photosmart d5360 and laserjet 4000 in windows 7
i have install windows 7 ver 7260 and everything was working fine,,then i have updated to ver 7600
and now my computer does not want to install the drivers,,
any ideas why is not working?
thanks

It does not matter how we got Windows 7 RTM (7600). But if you have to know to answer the questions about drivers, then MSDN Subscribers and Technet Subscribers can download Windows 7 RTM as of August 7. I also have Windows 7 RTM and I now cannot install the HP Laserjet 4000N printer. It used to work with Windows 7 RC but now not with RTM. My printer is located on a Windows Server 2008 based computer. It properly browses and I I can select it from the server list of printers. But it then tells me that I dont have a driver. Where can we get a driver? HP will have the Windows 7 RTM version as well for their driver support.

Vista x64 drivers needed for Satellite U200

Hello,
has anyone installed Vista x64 on the satellite U200? I want to change now to 64 bit, will upgrade to 4 GB memory as well.
Has anyone experience with the drivers that work? For chipset, wireless and graphics there is no problem. For the fingerprint I have as well. But how is it with the Value Added Package? Is this compatible with x64 and the Flashcards as well? Someone tried to install??
Thanks for answers!
snipe

Hello again! I changed to Vista x64 now - and what shall I say!!! WOW! It is two times faster then the old x86! Cannot believe it!
And I got nearly everything working, except the toshiba value added package - so I do not have the flashcards and the wireless changer - but I can wait - hope they fix this. Everything else works:
-fingerprint
-graphicscard
-wireless
-lan
-logitech mouse
-bluetooth (even switched to windows stack now for compatiblity reasons with logitech and nokia suite)
-toshiba assist works
-touchpad works, with scroll and so on
yeah thats it so far - and I am happy - did not expect so much! Try it yourself!
Greetz
snipe

Where can I find XP x64 drivers for Portege R500 - hotkey / power management?

Where can I find downloads that will enable power management or hotkey support for my Portege R500?
I have already installed drivers for everything except fingerprint reader (don't want), tpm (really don't want), and hdd motion sensor (tos620a) (not bothered about right now). Most drivers are latest from original vendor websites, or, failing those, from Toshiba's Vista 64-bit download areas.
Everything else generally works: wifi, graphics & chipset, sound, lan, bluetooth stack, cardbus, card reader, etc.
However, having done this, the following issues remain:
FN hotkeys don't work for suspend to ram, suspend to disk, *screen* *brightness* - essential to extending lifetime; FN hotkeys for numeric/direction pad, external monitor toggle *do* work
Dedicated backlight toggle button doesn't do anything
However, in order to get battery lifetime beyond ~2.5 hours and closer to the rated 7.1 hours, I'll need to turn some things down / off occasionally. What software can help and where can I get it, such that it works on Windows XP x64 edition?
Note:
I have tried the xp 32-bit packages that Toshiba supplies, they don't appear to work on x64. The 'ctrls' package requires 'cmod', but 'cmod' gives this error:
TOSHIBA Common Modules Setup
Not an ACPI machine. Cannot install TOSHIBA ACPI Logical Device.
OK
I have tried the xp 32-bit package called 'pwrsav'; it installs a bad help link to my start menu, and adds a couple of exes, tpsmain and tpsoddctl, to my auto-runs. These 32-bit executables quit immediately after execution.
I would have tried to install Toshiba's Vista 64-bit packages for hotkeys / common modules / power management, but the only one of the three I can find via toshiba.co.uk are common modules, and unfortunately that zip file only contains .inf, .cat and .sys files, no installer.
Motivation:
I'm using a fresh install both because the default Vista install is unusable (900MB memory used on a fresh boot desktop, drive split into multiple partitions, trial, adware and broken software installed left and right)
I'm using x64 because I'm a software engineer whose next product needs to work on x64, and this new laptop was a likely first candidate

You didn't link to the tool you found. If you meant this tool then, you should be aware it doesn't work on x64 on R500:
Display Tuner
Cannot detect monitor!
Your monitor does not support DDC control or your videocard is not supported by Display Tuner.
You cannot use Display Tuner in this configuration.
OK
It would be unlikely to work in any case, as display driver brightness isn't normally the same as the screen's brightness (hence power usage).
Maybe it's a communication issue, but I *have* found +original+ drivers for all essential components, just not for things like screen brightness - something that, to be honest, I more expect to be handled in firmware / bios, as that's been my experience on previous laptops, and is more reliable in any case, considering I could be running an oddball Linux or a completely different OS, or a CPU-intensive high-priority task.
The R500 series seem to be scrimping on the firmware and expecting OS utilities and dedicate yet another system tray icon to take over that job.
It does look like x64 is a no-go for mobile use on this machine, due to lack of firmware power management, which is a great pity as the point of such a light machine is mobility. I'll wipe it and install XP 32-bit and see how that goes.

Where are Windows 7 x64 drivers for the 444635u?

I've looked around, all I can find are Vista/XP drivers.. I know there's lenovo's main support page, but there's also the consumer-support page.. Which one am I supposed to use??
Can someone link me to the latest drivers for Win7 x64 for the 444635u model?
Thanks
EDIT: By the way, I've also downloaded and installed the Think Vantage system update program for Windows 7, and it return no results...
Solved!
Go to Solution.

Hi CGBS,
Drivers for Lenovo G530
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD

Vista Beta Drivers for the Modem Blaster V.92 Serial DE5

I was wondering if there are any beta drivers available for the Modem Blaster V.92 Serial DE562? Thank You, Mike...

Holly cow... a v.92 modem! Christ that's from like, the 90's! You an old timer/ludite by any chance
You could probably get broadband for less.
Regardless, i very much doubt you'll ever find drivers for this piece of kit.
I think it's amazing creative have stated they'll develop Vista drivers for such old hardware.
If you're using the x86 (32bit) version of Vista then the Win XP drivers might work.
If, however, you're using x64 (64bit) you're stuffed. On top of that if you take a look at the manual selection bit down the bottom f the page on the left, you'll see Vista's just not a selectable option.
But it REALLY is time for you to jump on the broadband train man! Low end connections are so cheap and still would be a gazillion times faster than what you're currently using.

X64 Drivers for 1820m

Installed the 1820m last night and upon reboot XP x64 recognized the card and automatically installed drivers for it. This surprized me! But no ASIO drivers were installed.
Tried running the latest downloaded drivers but they wouldn't install because it said my drivers were newer. So I uninstalled the drivers and rebooted. Cancelled the automatic installation of the existing drivers and ran the downloaded drivers. Was stupid enough to allow the install to overwrite one of the drivers.
After checking the dates it does appear that x64 had newer WDM drivers. x64's driver was dated 12/8/2005 with a version of 5.12.8.1164 and the downloaded drivers are 10/22/2005 version 5.12.5.1104 for the E-Mu E-DSP.
Haven't had time to get much more than system sounds and sound\video apps setup to use the basic card.
So the question is am I possibly going to run into problems with these drivers. I can't seem to get x64 to find the initial drivers it installed on reboot. Where can I get the 12/8/2005 drivers? As the Emu website seems to only have the 10/22 drivers for XP x64.
Thanks!

Hey mscheidell,
Ideally you should install the card with the drivers supplied or the ones downloaded from www.emu.com as they tend to be the most up-to-date drivers.
I can't envisage you experiencing any problems with the built in drivers as they would have been submitted to MS from E-MU in the first place.
What is the entry in Device Manager for the 1820M?
Have you installed the supplied software in order to check if there is an ASIO driver available?
ATB,
- Jen -

[Vista x64] Microphone problems with X-Fi and 2.15 drive

Hi guys,?I'm having a problem with the 2.5 drivers on my X-Fi Platinum card, under Vista x64. It seems the microphone inputs (both on the card and on the breakout box) have problems, any recordings stutter and pop rapidly, making any recordings (or voice chat)?quite useless. This issue doesn't occur with the 2.3 drivers. Is there any known solution to this problem yet?My system: e6600 CPU, Asus P5W-DH motherboard (975X chipset), 4GB RAM, 8800GTX, X-Fi Platinum. Thanks.

hey Darkman,
since I never had this problem with installing this software, I cant really tell whats wrong, but you dont need it anyway to use the x-fi.
but you may want to try one thing, since it crashes at 27% something may still be in use, so check your task manager and close everything that has CT in its name. then try reinstalling again. If that still doesnt work, try to empty your temp folder, its located in documents and settings/user you are/local settings/temp
if that still doesnt work, try maybe something stupid, wait a bit longer than usual and keep the install window in the front to watch the process, maybe your pc is just a bit slowed down by other software so it may take longer than normal

X64 drivers for RS480M2-IL

Hello all,
Anyone knows when the drivers for Windows x64 will come out ?
It's hard to believe that they sell a 64 bit motherboard without any drivers for it.
Thanks
Lorenz

Quote from: Sept1967 on 08-April-05, 22:13:40
ATI already has Catalyst 5.4 for x64
https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folderID=27
Realtek has x64 Audio drivers
http://www.realtek.com.tw/downloads/dlac97-2.aspx?lineid=5&famid=12&series=8&Software=True
Most companies are releasing x64 beta drivers, before x64 Windows is even out. Like someone said, give it some time.
I simply don't think this is right. Windows 64 has been in beta for a longgg time, and Athlon 64 CPUs have been selling very well for a longggg time. There's no excuse for ATI to drag their feet like this, no excuse. I want my Windows 64 drivers. If they don't come out soon my next motherboard will not be an ATI based board, as much as I like ATI I'll go elsewhere. The reason I'm annoyed is I built a new system with this board and need to purchase an OS (currently re-loading Windows XP Pro every 30 days using the CD for my other system). I'd like to go directly to Windows 64, I do not want to have to buy Windows XP and THEN Windows 64.

Windows 7 RTM drivers for sound control buttons and quick launch buttons on TX2

In the past two days this forum has helped me find several drivers for the TX2-1027CA tablet. Now I'd like to try to get two more - and I expect this will be more difficult to find, but here goes....
Is there a driver for the sound buttons (sound down, sound up, and mute) on the body of the tablet? Currently, with no driver, it has no effect to push them.
Is there a driver for the quick launch buttons (mediasmart, screen orientation, and so on) on the screen of the tablet? Pushing these also has no effect. Even better would be drivers that allow me to assign my own program choices, but I'll settle for the basic original functions.
Looking forward to any links as this software appears!

Hi Daniel. You seem to know what you're talking about, so perhaps you can help me. I bought my Pavilion dv7-1260us a mere 5 weeks before HP began offering its Windows 7 upgrade offer. Consequently, I had to purchase a retail version to upgrade. Now, I cannot reinstall the original programs and features my laptop came with (specifically, the MediaSmart soft-touch button above my keyboard will not work, and I've lost the Cyberlink DVD Suite 6 program entirely).
Do you happen to know how I may reinstall the Cyberlink DVD Suite 6 program and get my MediaSmart soft-touch key to work again? No one at HP Customer Care (including their Case Managers) can help. When I contacted Cyberlink, they told me I had to contact HP (vicious circle there), OR I have to purchase the program ($120 I don't have). I bought my laptop for school, and had to upgrade to Windows 7 because Vista Home Premium kept crashing (usually right in the middle of an online exam).
I would really like to have ALL of the programs and features working properly, but HP Customer Care will not help me unless I revert back to the unstable Vista Home Premium.
I greatly appreciate your assistance and hope you have a solution for me.
Sincerely,
Michael Walker
Albuquerque, NM

MOVED: Vista RAID drivers for K8N Diamond Plus?

This topic has been moved to Vista problems.
https://forum-en.msi.com/index.php?topic=104872.0

yOu needseperate drivers for NV raid and Sil raid.
you need seperate drivers for xp and 64 bit xp
msi diamond plus driver page.
http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=710&kind=1
Nv raid
xp64
javascript:void(window.open('/program/support/download/dld/spt_dld_file_record.php?folder=2&kind=1&name=NVRAID_XP64bit.zip','open','width=550,height=250,scrollbars=yes,resizable=no'))
xp
javascript:void(window.open('/program/support/download/dld/spt_dld_file_record.php?folder=2&kind=1&name=NVRAID_32bit(XP).zip','open','width=550,height=250,scrollbars=yes,resizable=no'))
sil
xp64bit
javascript:void(window.open('/program/support/download/dld/spt_dld_file_record.php?folder=2&kind=1&name=Sil3132WHQL(64bit).zip','open','width=550,height=250,scrollbars=yes,resizable=no'))
xp
javascript:void(window.open('/program/support/download/dld/spt_dld_file_record.php?folder=2&kind=1&name=Sil3132_NM3001.zip','open','width=550,height=250,scrollbars=yes,resizable=no'))
save apropriate drivers to the floppy disk provided. mark on the disk which version they are and when they were released.
1st enable all sata devices in bios. Enable NV raid and sil raid in bios if nessisary.
2nd set boot priority to dvd/cd.
3 save and exit
4 put in xp/xp64 bit install disk
5 as it boots up the lower left hand screen will say "hit f6 for additional drivers" or something similar. Hit f6
6 press S to load drivers from the floppy.
7 put correct disk in.
8 Select the nessisary drivers. For NVraid there are 2 drivers to load from the disk. I did it by loading (1) then (2)
9 It will eventually reboot. when it does hit f10 to enter nvraids config. Set up your raid set up. exit out
10 continue with xp/xp64 bit install.
I've used sil in the past and it was nearly identicle. Have fun

Vista x64 drivers for Broadcom BCM4311 wlan and touchpad

Similar Messages

Maybe you are looking for