Vista x64, PC Suite 6.84.10.3 & Blue Soleil Blueto...

Under XP PCsuite supported the BlueSoleil Bluetooth Stack. I do not see this listed for support under Vista. Is there a way to get it working?
I have
* Vista x64
* PC Suite 6.84.10.3
* Blue Soleil Bluetooth 2.6.8 070517
* Nokia N80, v5 software
I see bluetooth listed in PCsuite, but attempts to use it result in
Cannot use the connection type. Check that all the needed hardware, software & drivers are available.
Frustratingly the BlueSoleil stack seems to work well - even under vista 64, so it's a shame I can't use it with PCsuite.
I'll try hunting for a way to use the MS stack, or else will look at widcomm, but is there a way to get this working first?

When you say only the MS stack is supported on x64, do you mean that PCsuite can only use the MS stack on x64 - as opposed to saying that BlueSoleil/WIDCOMM aren't supported on x64.
I ask because BlueSoleil definately is supported & works on Vista x64 -- very very recently.
I have found out that there are compatible drivers (from MSI) which should allow use of the MS stack, it's just that for broader purposes (including audio support) the BlueSoleil is more functional, supporting far far more bluetooth profiles, so I would prefer to get this working.

Similar Messages

PC Suite 6.84, Restore crash under Vista x64 Ultim...

Hello, there. I have PC Suite 6.84 and, of course contents copier V4.0 on Vista Ultimate x64. Backup went very well with both N73ME or 6267. However, on Restore part, when go to part that ask us which Backup you want to restore, it crashs and Windows has to close program.
PS. Not a problem with WinXP. All with USB connection.
What should I do? Any suggestion??
Also, N-Series PC suite have had the similar problem but right from start Contents Copier V3.0. Is there any bugs in program or it just Winows Vista?Message Edited by delixis on 28-Oct-200703:47 AM
C6-00 with 8GB MicroSD

There are no suggestions what so ever. This means I'm alone or no body here use Vista x64 Ultimate version. Please shade some light on me.
C6-00 with 8GB MicroSD

E71 + PC Suite rebot Vista x64 automatically

Just purchased an E71. Since I installed PC Suite 7.1, Vista X64 reboot automatically 5-10 Minutes after I shutdown my computer...
Does anyone have a remedy?
Thx

Hi,
I think that your older PC Suite version didn't support Windows Protable device driver (and thats why BSOD didn't happen).
I think that problem is in Microsoft's WUDFRD.SYS driver file, see this:
http://support.microsoft.com/kb/933607/en-us
(I don't know does this solve the problem but check that you have latest version of those WUDxx.xx files.)
Also, you can try to update PC Suite to version 6.85 or disable Windows Portable device driver support from register.

[Solved] Audition won't start with [...\Preferences.cpp-253] error on windows 7/vista x64.

Hi! You have really nice support for Audition - 3 pages of problems here and no solution. Just kidding
So i've decided to help those poor users, that encounter the following problem (it may (or may not) arise after installing Adobe CS* with Audition already installed on the system)):
Adobe Audition crashes at start with the following error:
[\premiere2.0\Backend\Src\Core\Preferences.cpp-253]
After applying the Windows XP compatibility mode error chages to:
Adobe Audition could not find a supported audio device. Please check your device settings.
Then it crashes like before.
Uninstalling Adobe Premiere won't help, by the way.
This problem is somehow related to the audition_settings.xml file in the Data folder and deleting this file solves the problem. You can aslo delete the whole folder - it will be created again on a next Adobe Audition start. Here is the path:
C:\Users\[Your Username]\AppData\Roaming\Adobe\Audition\3.0\audition_settings.xml
Some technical data on my system:
OS: Windows Server 2008 R2 (don't be confused - it is in every way identical to Windows 7 x64, at least for Adobe products). I have a strong feeling that Vista x64 users may encounter that too.
Installed Adobe products:
1. Adobe Audition
2. Adobe Master Suite CS5 (without premier)
3. Adobe Acrobat X
I hope that my post will help you solve the error in the next release!

the primary hard disk self test fail at 01%

Can't install Premiere Pro CS3 in vista x64!

Hi
I'm trying to install Adobe Premiere Pro CS3 trial version on my system Vista Ultimate X64, every time I run setup.exe that extracted on my desktop it load for few seconds, loading and then it close with no reason.
There's no error code or any message after it close. and I'm also pretty sure that my system met recommended requirements. I'll upload dxdiag anyway.
I just were on my way to buy this product but I said ill try it as long as there a trial version, thanks to "trial versions" idea that adobe presents to us.
Anyway, what is my problem, what's wrong?

I have to agree with Aanarav but I haven't suffered the same USB audio problem. My Rode mic works fine.
I've loaded CS3 Production Premium on Vista x64 and suffered no ill effects at all. My projects are longform (documentary) and the greatest benefit so far is the drastically reduced rendering times (mind you that's a quad core with 8Gb of memory.) Apart from the Adobe suite I can run GPU based programs like ProDad's Vitascene and many others concurrently without affecting processing speed all that much. For the first time I can actually run Prem Pro and Avid liquid at the same time (not too well mind you) and that's a feat.
As to all the "questions" Vista may ask the solution is simple - turn them off.
There's a lot of rumours about "lack" of drivers but this is changing daily and I don't have one piece of hardware/software from XP that can't run on Vista x64 including my 14 year old HP Laserjet 6p printer. The only hardware I needed to replace was my Lide30 Canon scanner (2 years old).
Oh! the nVidia x64 bit video drivers are a treat.
Vista x64 - faster than a speeding bullet (if you have a half decent machine)

BSOD Vista x64 After Waking from Sleep

Hi. I recently re-installed my OS after purchasing a new MB (ASUS P8277-M LGA 1155). I in stalled a fresh (/mbr format) copy of WIN Vista x64. After my computer awakens from sleep mode a BSOD occurs. I've tried troubleshooting the issue with winDBg; however,
I cannot resolve the issue. The output from my dump file is below. Please let me know the next steps I should take to resolve this issue.
Thanks,
Chris
Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Windows\Minidump\Mini021214-02.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack 2) MP (8 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 6002.18881.amd64fre.vistasp2_gdr.130707-1535
Machine Name:
Kernel base = 0xfffff800`01c15000 PsLoadedModuleList = 0xfffff800`01dd9e30
Debug session time: Wed Feb 12 19:04:50.893 2014 (UTC - 6:00)
System Uptime: 0 days 10:27:05.946
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck F4, {3, fffffa800c74a710, fffffa800c74a948, fffff80001ea5870}
Probably caused by : csrss.exe
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
CRITICAL_OBJECT_TERMINATION (f4)
A process or thread crucial to system operation has unexpectedly exited or been
terminated.
Several processes and threads are necessary for the operation of the
system; when they are terminated (for any reason), the system can no
longer function.
Arguments:
Arg1: 0000000000000003, Process
Arg2: fffffa800c74a710, Terminating object
Arg3: fffffa800c74a948, Process image file name
Arg4: fffff80001ea5870, Explanatory message (ascii)
Debugging Details:
PROCESS_OBJECT: fffffa800c74a710
IMAGE_NAME: csrss.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 0
MODULE_NAME: csrss
FAULTING_MODULE: 0000000000000000
PROCESS_NAME: csrss.exe
EXCEPTION_CODE: (NTSTATUS) 0x114adbb0 - <Unable to get error code text>
BUGCHECK_STR: 0xF4_114ADBB0
CUSTOMER_CRASH_COUNT: 2
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
CURRENT_IRQL: 0
STACK_TEXT:
fffffa60`023421a8 fffff800`01f6cb63 : 00000000`000000f4 00000000`00000003 fffffa80`0c74a710 fffffa80`0c74a948 : nt!KeBugCheckEx
fffffa60`023421b0 fffff800`01f1c380 : fffffa80`114adbb0 fffffa80`114adbb0 fffffa60`02342c20 fffffa60`02342a40 : nt!PspCatchCriticalBreak+0x93
fffffa60`023421f0 fffff800`01ec2a98 : fffffa80`114adbb0 00000000`00000008 fffffa60`02342c20 00000000`00000008 : nt! ?? ::NNGAKEGL::`string'+0x103a6
fffffa60`02342240 fffff800`01c6bbf3 : fffffa80`0c74a710 fffffa80`114adbb0 fffffa60`02342320 fffffa60`02342c20 : nt!NtTerminateProcess+0xd8
fffffa60`023422a0 fffff800`01c6c100 : fffff800`01cce59d fffffa60`02342b78 fffffa60`02342ca0 fffffa60`02342c20 : nt!KiSystemServiceCopyEnd+0x13
fffffa60`02342438 fffff800`01cce59d : fffffa60`02342b78 fffffa60`02342ca0 fffffa60`02342c20 00000000`014915a0 : nt!KiServiceLinkage
fffffa60`02342440 fffff800`01c6bfa9 : fffffa60`02342b78 00000000`00005d2c fffffa60`02342c20 00000000`01491ba8 : nt! ?? ::FNODOBFM::`string'+0x2942c
fffffa60`02342a40 fffff800`01c6ada5 : 00000000`00000000 fffffa60`02342ca0 00000000`00000001 00000000`00005d2c : nt!KiExceptionDispatch+0xa9
fffffa60`02342c20 00000000`7767320e : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x1e5
00000000`014914c0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7767320e
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
FAILURE_BUCKET_ID: X64_0xF4_114ADBB0_IMAGE_csrss.exe
BUCKET_ID: X64_0xF4_114ADBB0_IMAGE_csrss.exe
Followup: MachineOwner

cperry11
9 of 11 were related to memory corruption. Please run these 2 tests
These crashes were related to memory corruption (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you dont
know what it is you probably are not overclocking.
1-Memtest. (You can read more about running memtest here)
Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
Boot from the CD, and leave it running for at least 5 or 6 passes.
Just remember, any time Memtest reports errors, it can be either bad RAM or a bad motherboard slot.
Test the sticks individually, and if you find a good one, test it in all slots.
If a known good stick fails in one motherboard slot but not another it is probably the slot.
2-Driver verifier (for complete directions see our wiki here)
Using Driver Verifier is an iffy proposition.
Most times it will crash and it will tell you what the driver is, but sometimes it will crash and won't tell you the driver.
Other times it'll crash before you can log in to Windows. If you can't get to Safe Mode, then you'll have to resort to offline editing of the registry to disable Driver Verifier.
I'd suggest that you first backup your data and then make sure you've got access to another computer so you can contact us if problems arise.
Then make a System Restore point (so you can restore the system using the Vista/Win7 Startup Repair feature).
Here is the procedure:
Go to Start and type in "verifier" (without the quotes) and press Enter
Select "Create custom settings (for code developers)" and click "Next"
Select "Select individual settings from a full list" and click "Next"
Select everything EXCEPT FOR "Low Resource Simulation"
For Win 8 dont check Concurrency stress test, and DDI compliance checking click "Next"
Select "Select driver names from a list" and click "Next"
Then select all drivers NOT provided by Microsoft and click "Next"
Select "Finish" on the next page.
Reboot the system and wait for it to crash to the Blue Screen.
Continue to use your system normally, and if you know what causes the crash, do that repeatedly.
The objective here is to get the system to crash because Driver Verifier is stressing the drivers out.
If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.
If you can't get into Windows because it crashes too soon, try it in Safe Mode.
If you can't get into Safe Mode, try using System Restore from your installation DVD to set the system back to the previous restore point that you created.
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Vista x64, PCsuite 6.84, N80, bluetooth - NoGo.

I've mentioned this in a few place but here's a detailed report of my inability to connect to PCsuite over bluetooth
Phone: Nokia N80 5.0719.0.2
PC: Dell, Pentium 820D 3Gb ram, Vista x64
From "system info"
Operating system:
Microsoft Windows Vista
Build 6000
No service pack installed
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.84.10.3
Language: English
Connectivity Cable Drivers:
Version 6.84.4.0
PC Connectivity Solution:
Version 7.22.7.1
Microsoft Outlook:
Version 12.0
Build 5000
No supported Bluetooth stack found
Now I disagree with that last statement since Microsoft Bluetooth is up and running!
I am able to pair via MS UI, but any attempt to pair with PCsuite results in
Select connection type -> bluetooth
NEXT
Detected Devices: N80 (with green handshake symbol) saying "phone needs to be authorized"
SELECT/NEXT
X Cannot authenticate the phone
I've tried unpairing, repairing the "connectivity" and "pcsuite" software items, rebooting pc, rebooting phone to no avail.
The same phone works ok on another Vista >>x86 PC, and this phone works ok with a serial connection.

When you say only the MS stack is supported on x64, do you mean that PCsuite can only use the MS stack on x64 - as opposed to saying that BlueSoleil/WIDCOMM aren't supported on x64.
I ask because BlueSoleil definately is supported & works on Vista x64 -- very very recently.
I have found out that there are compatible drivers (from MSI) which should allow use of the MS stack, it's just that for broader purposes (including audio support) the BlueSoleil is more functional, supporting far far more bluetooth profiles, so I would prefer to get this working.

Vista x64 drivers needed for Satellite U200

Hello,
has anyone installed Vista x64 on the satellite U200? I want to change now to 64 bit, will upgrade to 4 GB memory as well.
Has anyone experience with the drivers that work? For chipset, wireless and graphics there is no problem. For the fingerprint I have as well. But how is it with the Value Added Package? Is this compatible with x64 and the Flashcards as well? Someone tried to install??
Thanks for answers!
snipe

Hello again! I changed to Vista x64 now - and what shall I say!!! WOW! It is two times faster then the old x86! Cannot believe it!
And I got nearly everything working, except the toshiba value added package - so I do not have the flashcards and the wireless changer - but I can wait - hope they fix this. Everything else works:
-fingerprint
-graphicscard
-wireless
-lan
-logitech mouse
-bluetooth (even switched to windows stack now for compatiblity reasons with logitech and nokia suite)
-toshiba assist works
-touchpad works, with scroll and so on
yeah thats it so far - and I am happy - did not expect so much! Try it yourself!
Greetz
snipe

X-FI XtremeMusic - Compatibility with Vista x64

Hi. I currently have the Audigy 2 ZS installed in the following system:
Intel Quad Core Q9300 (@ 2.5ghz)
4GB DDR2
ATI Radeon HD4650 GB
Nvidia 730i chipset
Yet installing the drivers provided on the website with the operating system of Windows Vista x64 gave me numerous problems (particuarly in games...no surround hearing or decent bass) so have decided to go for an 'assumed' more supported card - the XFI XtremeMusic.
Now, my question(s) is, when I receive the XFI will the drivers on the CD be Vista x64 be supported and if not does it matter (I needed the CD before for my Audigy 2 ZS on XP before installing the drivers on the Creative website).
Do I get all the GUI apps included
Am I going to get that surround-sound-like hearing back (DirectSound or something is it's - the game I'm particuarly talking about is Americas' Army here if that helps). Bass too
I need to ask these most probably obvious questions before I buy the product, just to save me the dissapointment.
Thanks,
Junkz.

Your question :
when I receive the XFI will the drivers on the CD be Vista x64 be supported
Answer :
No, most likely you will get an original Windows XP installation CD with Win XP drivers and the software suite for the X-Fi XtremeMusic Soundcard. The Windows XP installation CD for Win XP will not work in the any vista OS. Below is a weblink to get the X-Fi Installation CD for Windows Vista.
This vista installation CD will have all the drivers and software needed to operate the X-Fi ExtremeMusic Soundcard. Yes. the GUI apps are included on the vista installation CD and some upgrades are required.
Whats NOT included on the installation CD is the Dolby Digital Li've and DTS Connect Pack, If you want it you have to buy it separately, weblink below. Also, this vista installation CD does not have the up-to-date drivers and software.
Once you install the Vista installation CD completely, You must either download the updated drivers and software separately from Creative Labs download webpage or use "Creative Software AutoUpdate" to update to the latest drivers and software of your choice.
Sound Blaster X-Fi Installation CD for Windows Vista :
http://us.creative.com/products/prod...5&product=6743
Dolby Digital Li've and DTS Connect Pack :
http://buy.soundblaster.com/_creativ...DDN6Z2H2ADDEZD

NVIDIA GeForce 8600M GT driver for Vista x64

Hello,
I have an issue with my new MacBook Pro 2.4Ghz 17" that was released on the 5th of June, 2007.
It has NVIDIA GeForce 8600M GT installed on it and I simply cannot find Vista 64 bit drivers for it.
I have tried the latest beta Vista x64 drivers (163.11) downloaded from nVidia's official website. I have tried several previous versions including 100.97 one, which contains drivers for 8600M GT model. But they don't work with me. All the driver installation programs allert the following error and quit:
'The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit'.
I also tried Vista 32-bit drivers for 8600M GT. The driver installation program claims the operation system is wrong and quits.
Anybody has the same issue?
Does a working driver of nVidia GeForce 8600M GT for Vista x64 exist at all?
MacBook Pro 2.4Ghz Windows Vista nVidia GeForce 8600M GT

There was one Apple's presentstion where they boot into Windows Vista. So if you claim you can do it why do you forget about Vista x64 customers? I reckon it is because of Leopard that is coming. But it's not an excuse.
I'm currently working in Vista x64 and everything is fine except one thing, I cannot find a working graphics card driver and it is manufacturer's responsibility to provide it. Apple knew there going to be customers who will install Vista x64 on their computers and they at Apple didn't care about it because I guess it's a lame war between you know who.
So why you don't make everything perfect to attract even more Windows customers but instead you hint that you don't care about Vista x64 as you are getting your own 64-bit OS soon. So now they are forcing me to wait having been announced that I can use Vista. But isn't that kind of lame that it's slightly tardy? Why I should wait for Leopard launch if I was insured that Windows will work on my Macbook Pro? Because Apple claim you can run Windows. And don't say it's not official. Who else if not Apple made it possible to run Windows on Mac.
Don't get me wrong, I'm not trying to insult you. I'm just angry that I cannot find a working driver.
Message was edited by: Melnyk

Bass Redirect in Vista x64 w/ XI-FI 2.13.0

Hi everyone,
My apologies if this question has already been answered (and often,) but I couldn't find it while searching.
Anyway, on my old PC with Windows XP (and then Vista) 32 bit, I was able to use my X-Fi's bass redirect function to spread out the bass over my front speakers. I've since moved my soundcard to a new PC featuring Windows Vista x64, and I can no longer find this feature.
Does anyone know if the latest Vista drivers (2.3.002) support bass redirect, and if so, how I might locate the feature?
My card is a Sound Blaster X-Fi Platinum Edition. Btw, I thankfully haven't experienced any other problems with the card / driver / OS combination. The card sits in an nForce 680i moBo and is situated in the lone PCI slot between the two PCI-E x6 slots.
Thanks,
Mark.

Hmm.. Very interesting. I'm downloading now (hopefully it will be finished by the time I arri've home from work -- it's a very sllllloooow download at 20 Kpbs.) Btw, does anyone know if this works on Vista x64 as well?
Mark.

ITunes will not work on Fresh INstall of Vista x64 SP1

I have a strange issue. I have a Windows Vista x64 with SP1 (Yes the DVD is a production DVD from Microsoft not a slip stream copy.) and I wanted to do a fresh install of Vista with SP1. Reinstalled OS and everything is running great but iTunes. When I start iTunes I get this error message about "mssip32.dll" being damaged or corrupt please reinstall the app. So I looked around good old Google and apple.com. I found several fixes about re-registering a set of dll files. So did them all, no change. Reinstalled Vista from scratch again, no change. So for the heck of it I reinstalled Vista with no SP1 installed and then applied SP1 and it works fine. I reinstalled Vista with SP1 and have been running it for over a week and everything on the system is tested and solid as a rock with no issues. The only program that will not work is iTunes. I have also tried all the way back to version 7.4 and no luck.
Any ideas on this?

Read this scary microsoft support article on windows updates?

Vista X64 Drive Management Snap-In Error with SD Cards

I have someone with an W700, 2752-3KG, running Vista X64, raid 1 configuration with factory image. The system also has a VM with XPP X86 in case it proves relevant.
Everything works like a dream, except for one thing which has got us completely stumped. When an SD card is inserted it is recognized as new hardware as expected. There is no autorun, i.e. Open folder / play music window, as this was disabled when the VM was set up. In drive management the SD card will be shown, but alas not assigned a drive letter. Any attempt to assign a drive letter results in the following message; (translated from German to English using translate.google.com)
"The operation could not be completed because the view
of the Disk Management snap-ins is not current. Refresh your view with the
update task. If the problem persists, close the Disk Management snap-in, and
then restart the Disk Management snap-in or the computer."
[Original screenshot attached 203KB]
The usual routine of updating / rolling back of drivers, uninstalling the hardware etc. etc has been tried to no avail.
The SD cards work fine on other TPs including W700s with Vista X64, X86 and XPP X86, they also work fine on this system when using an USB card reader
What hasn't been tried is running a recovery to another hdd. As the system is used daily this would mean blowing part of a weekend. And if a weekend is going to be partly blown, then I'd rather blow it completely and reinstall everything from scratch which would be a shame because, as previously stated, everything else is running 110%.
Has anyone experienced similar? Any ideas? I've searched MS thoroughly without finding anything
Thanks in advance
Edit; Typo
Message Edited by andyP on 04-20-2009 10:10 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Attachments:
snapinerror.jpg ‏204 KB

You may want to try a few different SD cards, there are apparently some which do not play well with Vista.
Personally I haven't had any issues with a 2GB SanDisk SD card running as ReadyBoost in an X61 under Vista Ultimate x64.
Cheers,
Bill
I don't work for Lenovo

Black screen with blinking cursor when installing win 7/vista x64 osx 10.6

i am using bootcamp 3 to install windows 7/vista x64 on osx 10.6.6.when i select install mac reboots and then all i get is a black screen with white cursor.
i have created a 20gb partition with disk utility in fat32 and i had installed windows successfully when i was on osx 10.5.i tried erasing and creating new partition but same problem.
any help will be appreciated

This solved it for me!
From another forum:
"1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
2. Hold down Option key till all available disks are displayed and select DVD. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
5. Click Repair your computer.
6. Click the operating system that you want to repair, and then click Next.
7.In the System Recovery Options dialog box, click Command Prompt.
Type (these commands are safe)
Code: Bootrec.exe /FixMbr
Code: Bootrec.exe /FixBoot
Code: Bootrec.exe /RebuildBcd
*Press ENTER after each command.*
*Restart your computer.* "

ITunes and Windows 7 (or Vista) x64

Hey there,
the current state with syncing my iPod under Windows Vista x64 and Windows 7 (RC) x64 is horrible. iTunes locks itself up for several minutes, syncing large Music libraries takes hours - and might break halfway through the progress. It's a shame that I have to experience such lacky behaviour from Apple Products.
Having ordered an iPhone 3Gs, I wonder if I'll experience the same trouble with it.
Will Apple make it to provide a working sync solution for Windows 7 x64?
Windows 7 is no longer pre release, so it's time to take some action. You should've downloaded the RTM copy of Windows 7 x64 already, MobileDeviceDriver Team.
Pretty Disappointed
Stefan

Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
what typically works with the 2380s on 64-bit OSs (it hits XP too) is reinstalling the 64-bit version of the GEAR drivers that iTunes uses for burning and importing.
the GEAR drivers are available from the following page. note that there are two different versions of the 64-bit driver, so be sure to get the one that matches your hardware:
GEAR drivers

Vista x64, PC Suite 6.84.10.3 & Blue Soleil Blueto...

Similar Messages

Maybe you are looking for