Vista x64, PCsuite 6.84, N80, bluetooth - NoGo.

I've mentioned this in a few place but here's a detailed report of my inability to connect to PCsuite over bluetooth
Phone: Nokia N80 5.0719.0.2
PC: Dell, Pentium 820D 3Gb ram, Vista x64
From "system info"
Operating system:
Microsoft Windows Vista
Build 6000
No service pack installed
Language: English
Language for non-Unicode programs: English
Locale: English
Input language: English
Nokia PC Suite:
Version 6.84.10.3
Language: English
Connectivity Cable Drivers:
Version 6.84.4.0
PC Connectivity Solution:
Version 7.22.7.1
Microsoft Outlook:
Version 12.0
Build 5000
No supported Bluetooth stack found
Now I disagree with that last statement since Microsoft Bluetooth is up and running!
I am able to pair via MS UI, but any attempt to pair with PCsuite results in
Select connection type -> bluetooth
NEXT
Detected Devices: N80 (with green handshake symbol) saying "phone needs to be authorized"
SELECT/NEXT
X Cannot authenticate the phone
I've tried unpairing, repairing the "connectivity" and "pcsuite" software items, rebooting pc, rebooting phone to no avail.
The same phone works ok on another Vista >>x86 PC, and this phone works ok with a serial connection.

When you say only the MS stack is supported on x64, do you mean that PCsuite can only use the MS stack on x64 - as opposed to saying that BlueSoleil/WIDCOMM aren't supported on x64.
I ask because BlueSoleil definately is supported & works on Vista x64 -- very very recently.
I have found out that there are compatible drivers (from MSI) which should allow use of the MS stack, it's just that for broader purposes (including audio support) the BlueSoleil is more functional, supporting far far more bluetooth profiles, so I would prefer to get this working.

Similar Messages

Vista x64, PC Suite 6.84.10.3 & Blue Soleil Blueto...

Under XP PCsuite supported the BlueSoleil Bluetooth Stack. I do not see this listed for support under Vista. Is there a way to get it working?
I have
* Vista x64
* PC Suite 6.84.10.3
* Blue Soleil Bluetooth 2.6.8 070517
* Nokia N80, v5 software
I see bluetooth listed in PCsuite, but attempts to use it result in
Cannot use the connection type. Check that all the needed hardware, software & drivers are available.
Frustratingly the BlueSoleil stack seems to work well - even under vista 64, so it's a shame I can't use it with PCsuite.
I'll try hunting for a way to use the MS stack, or else will look at widcomm, but is there a way to get this working first?

When you say only the MS stack is supported on x64, do you mean that PCsuite can only use the MS stack on x64 - as opposed to saying that BlueSoleil/WIDCOMM aren't supported on x64.
I ask because BlueSoleil definately is supported & works on Vista x64 -- very very recently.
I have found out that there are compatible drivers (from MSI) which should allow use of the MS stack, it's just that for broader purposes (including audio support) the BlueSoleil is more functional, supporting far far more bluetooth profiles, so I would prefer to get this working.

KeyAgent and MacHAL didn't install when installing Vista x64

Hi All,
I have seen a couple of sketchy posts about this, but nothing that really explains what's going on here.
I tried a clean install of Vista x64 last night on BootCamp, and I loaded the new Mac Pro BootCamp drivers than are available for download on the web (they are supposed to support x64 now).
I got two errors... KeyAgent and MacHAL wouldn't install. As some people have mentioned, the installation said I didn't have the correct permissions.
Anyway, the installation proceeded when I selected 'ignore' to these errors... and on the face of it, all seems well with my Vista installation.
However, question is, what do KeyAgent and MacHAL do...?? Do I need them...?? Is there a way I can get them installed...?? Etc..
Many Thanks

Hi, Just hit the same problem with installing Vista Ultimate x64. KeyAgent & MacHAL failed to start, did the ignore and everything looked OK. Installed the Mac drivers, but no Bluetooth, Airport etc, plus the BootCamp control panel and system tray were missing.....
Removed the BootCamp partition completely and reinstalled this time with x32 version of Vista,
no problems at all, Mac drivers load and everything works. Hate having to corrupt my first Mac in 8 years, but need Windows for specific PC applications.
As a side note. I had to create a 50Gb partition, due to file sizes. Downloaded MacDrive7 from MediaFour, absolutely brilliant. Lets me see the Mac Partition and my Mac 750Gb Seagate backup from Windows. One small issue, when you load software that has both Mac & PC installs, if MacDrive is turned on you can't see the PC install. Workaround - disable MacDrive7, reboot, PC version installs OK and then reset MacDrive7.
Cheers

4502 connects to wireless router but will not load as printer to Dell 1545 Vista x64 wireless

HP 4502 shows and active wireless connection to router and router shows 4502 is connected and has MAC pass-thru. HP software install on Dell 1545 computer under Vista x64 was fine until the connect wireless choice was selected. Result was printer was not loaded. Dell does not have bluetooth board so couldn't use wireless direct option on printer. Printer worked well wireless at one time but when internet connection to AOL was lost something went astray. Printing test page wireless while in HP printer control software on computer works fine but that is rather boring after a while, and very frustrating trying to understand why thats' possible when printer does not show as available for connection from any other program. Have uninstalled HP software, cleaned registry, set printer to factory default, powered down and unplugged all, reinstalled from scratch twice with same result. ANy suggestions?

Hi Sam_lost,
Thank you for your response! I have a few more solutions for you:
Please try going through this guide, An 'Unable to find printer' Error Displays for the HP ENVY 4500 e-All-in-One and HP Deskjet Ink Adva....
Try this Microsoft Fix It program. Fix problems that programs cannot be installed or uninstalled.
If those steps do not work then try the following:
Backup your files. Back up your files.
Re-install Windows Vista. Installing and reinstalling Windows.
Hope this helps, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

700p (Verizon) and Vista x64

I just bought me a new laptop that has Vista x64 on it. I've tried to sync via Bluetooth (which is the only option for Vista x64) and I get the following error message:
"Unable to initiate HotSync operation because the port is in use by another application."
Anyone have any suggestions?
Post relates to: Treo 700p (Verizon)

I got my WiFi hotsync to work fine on my Vista 64 system. The latest Palm Desktop versions did not work for me, only the original set up disk worked. Make sure all previous versions of Palm Desktop that you may have tried to install are uninstalled first and to be safe, reboot after the uninstall. Go to help and support in your start menu. Type "compatibility wizard in the search pane. Start the wizard. Follow the directions and select the Start with XP service pack option. Also choose the start with cd option. Insert the original Tungsten C installation disk. You may have to fool around with the various screens that come up next, but the bottom line is, install the original program from your installation disk under the run with XP option. You will then be able to hotsync with Wifi after you set up the wifi on your palm with the correct computer name and ip address. (VPN is not necessary.). I have not yet tried the USB as it is still set up on a backup computer with XP, but I suspect thet it will work. You may have to reboot before the hot sync after installation. Also you will note an icon in the taskbar that shows that there is a program that was blocked from startup by Vista. You have to click on the icon and open the blocked program which is Palm Desktop before each hotsync. (It opens the hotsync icon on the taskbar and then allows the options menu in the palm desktop program to work). Also you will probably have to open the hotsync icon on the taskbar and configure the setup before first hotsync.

Vista x64 drivers needed for Satellite U200

Hello,
has anyone installed Vista x64 on the satellite U200? I want to change now to 64 bit, will upgrade to 4 GB memory as well.
Has anyone experience with the drivers that work? For chipset, wireless and graphics there is no problem. For the fingerprint I have as well. But how is it with the Value Added Package? Is this compatible with x64 and the Flashcards as well? Someone tried to install??
Thanks for answers!
snipe

Hello again! I changed to Vista x64 now - and what shall I say!!! WOW! It is two times faster then the old x86! Cannot believe it!
And I got nearly everything working, except the toshiba value added package - so I do not have the flashcards and the wireless changer - but I can wait - hope they fix this. Everything else works:
-fingerprint
-graphicscard
-wireless
-lan
-logitech mouse
-bluetooth (even switched to windows stack now for compatiblity reasons with logitech and nokia suite)
-toshiba assist works
-touchpad works, with scroll and so on
yeah thats it so far - and I am happy - did not expect so much! Try it yourself!
Greetz
snipe

NVIDIA GeForce 8600M GT driver for Vista x64

Hello,
I have an issue with my new MacBook Pro 2.4Ghz 17" that was released on the 5th of June, 2007.
It has NVIDIA GeForce 8600M GT installed on it and I simply cannot find Vista 64 bit drivers for it.
I have tried the latest beta Vista x64 drivers (163.11) downloaded from nVidia's official website. I have tried several previous versions including 100.97 one, which contains drivers for 8600M GT model. But they don't work with me. All the driver installation programs allert the following error and quit:
'The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit'.
I also tried Vista 32-bit drivers for 8600M GT. The driver installation program claims the operation system is wrong and quits.
Anybody has the same issue?
Does a working driver of nVidia GeForce 8600M GT for Vista x64 exist at all?
MacBook Pro 2.4Ghz Windows Vista nVidia GeForce 8600M GT

There was one Apple's presentstion where they boot into Windows Vista. So if you claim you can do it why do you forget about Vista x64 customers? I reckon it is because of Leopard that is coming. But it's not an excuse.
I'm currently working in Vista x64 and everything is fine except one thing, I cannot find a working graphics card driver and it is manufacturer's responsibility to provide it. Apple knew there going to be customers who will install Vista x64 on their computers and they at Apple didn't care about it because I guess it's a lame war between you know who.
So why you don't make everything perfect to attract even more Windows customers but instead you hint that you don't care about Vista x64 as you are getting your own 64-bit OS soon. So now they are forcing me to wait having been announced that I can use Vista. But isn't that kind of lame that it's slightly tardy? Why I should wait for Leopard launch if I was insured that Windows will work on my Macbook Pro? Because Apple claim you can run Windows. And don't say it's not official. Who else if not Apple made it possible to run Windows on Mac.
Don't get me wrong, I'm not trying to insult you. I'm just angry that I cannot find a working driver.
Message was edited by: Melnyk

Bass Redirect in Vista x64 w/ XI-FI 2.13.0

Hi everyone,
My apologies if this question has already been answered (and often,) but I couldn't find it while searching.
Anyway, on my old PC with Windows XP (and then Vista) 32 bit, I was able to use my X-Fi's bass redirect function to spread out the bass over my front speakers. I've since moved my soundcard to a new PC featuring Windows Vista x64, and I can no longer find this feature.
Does anyone know if the latest Vista drivers (2.3.002) support bass redirect, and if so, how I might locate the feature?
My card is a Sound Blaster X-Fi Platinum Edition. Btw, I thankfully haven't experienced any other problems with the card / driver / OS combination. The card sits in an nForce 680i moBo and is situated in the lone PCI slot between the two PCI-E x6 slots.
Thanks,
Mark.

Hmm.. Very interesting. I'm downloading now (hopefully it will be finished by the time I arri've home from work -- it's a very sllllloooow download at 20 Kpbs.) Btw, does anyone know if this works on Vista x64 as well?
Mark.

ITunes will not work on Fresh INstall of Vista x64 SP1

I have a strange issue. I have a Windows Vista x64 with SP1 (Yes the DVD is a production DVD from Microsoft not a slip stream copy.) and I wanted to do a fresh install of Vista with SP1. Reinstalled OS and everything is running great but iTunes. When I start iTunes I get this error message about "mssip32.dll" being damaged or corrupt please reinstall the app. So I looked around good old Google and apple.com. I found several fixes about re-registering a set of dll files. So did them all, no change. Reinstalled Vista from scratch again, no change. So for the heck of it I reinstalled Vista with no SP1 installed and then applied SP1 and it works fine. I reinstalled Vista with SP1 and have been running it for over a week and everything on the system is tested and solid as a rock with no issues. The only program that will not work is iTunes. I have also tried all the way back to version 7.4 and no luck.
Any ideas on this?

Read this scary microsoft support article on windows updates?

Vista X64 Drive Management Snap-In Error with SD Cards

I have someone with an W700, 2752-3KG, running Vista X64, raid 1 configuration with factory image. The system also has a VM with XPP X86 in case it proves relevant.
Everything works like a dream, except for one thing which has got us completely stumped. When an SD card is inserted it is recognized as new hardware as expected. There is no autorun, i.e. Open folder / play music window, as this was disabled when the VM was set up. In drive management the SD card will be shown, but alas not assigned a drive letter. Any attempt to assign a drive letter results in the following message; (translated from German to English using translate.google.com)
"The operation could not be completed because the view
of the Disk Management snap-ins is not current. Refresh your view with the
update task. If the problem persists, close the Disk Management snap-in, and
then restart the Disk Management snap-in or the computer."
[Original screenshot attached 203KB]
The usual routine of updating / rolling back of drivers, uninstalling the hardware etc. etc has been tried to no avail.
The SD cards work fine on other TPs including W700s with Vista X64, X86 and XPP X86, they also work fine on this system when using an USB card reader
What hasn't been tried is running a recovery to another hdd. As the system is used daily this would mean blowing part of a weekend. And if a weekend is going to be partly blown, then I'd rather blow it completely and reinstall everything from scratch which would be a shame because, as previously stated, everything else is running 110%.
Has anyone experienced similar? Any ideas? I've searched MS thoroughly without finding anything
Thanks in advance
Edit; Typo
Message Edited by andyP on 04-20-2009 10:10 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Attachments:
snapinerror.jpg ‏204 KB

You may want to try a few different SD cards, there are apparently some which do not play well with Vista.
Personally I haven't had any issues with a 2GB SanDisk SD card running as ReadyBoost in an X61 under Vista Ultimate x64.
Cheers,
Bill
I don't work for Lenovo

Black screen with blinking cursor when installing win 7/vista x64 osx 10.6

i am using bootcamp 3 to install windows 7/vista x64 on osx 10.6.6.when i select install mac reboots and then all i get is a black screen with white cursor.
i have created a 20gb partition with disk utility in fat32 and i had installed windows successfully when i was on osx 10.5.i tried erasing and creating new partition but same problem.
any help will be appreciated

This solved it for me!
From another forum:
"1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
2. Hold down Option key till all available disks are displayed and select DVD. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
5. Click Repair your computer.
6. Click the operating system that you want to repair, and then click Next.
7.In the System Recovery Options dialog box, click Command Prompt.
Type (these commands are safe)
Code: Bootrec.exe /FixMbr
Code: Bootrec.exe /FixBoot
Code: Bootrec.exe /RebuildBcd
*Press ENTER after each command.*
*Restart your computer.* "

ITunes and Windows 7 (or Vista) x64

Hey there,
the current state with syncing my iPod under Windows Vista x64 and Windows 7 (RC) x64 is horrible. iTunes locks itself up for several minutes, syncing large Music libraries takes hours - and might break halfway through the progress. It's a shame that I have to experience such lacky behaviour from Apple Products.
Having ordered an iPhone 3Gs, I wonder if I'll experience the same trouble with it.
Will Apple make it to provide a working sync solution for Windows 7 x64?
Windows 7 is no longer pre release, so it's time to take some action. You should've downloaded the RTM copy of Windows 7 x64 already, MobileDeviceDriver Team.
Pretty Disappointed
Stefan

Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
what typically works with the 2380s on 64-bit OSs (it hits XP too) is reinstalling the 64-bit version of the GEAR drivers that iTunes uses for burning and importing.
the GEAR drivers are available from the following page. note that there are two different versions of the 64-bit driver, so be sure to get the one that matches your hardware:
GEAR drivers

Webcam NX and Windows Vista x64

To whom who can solve this problem,?I have now been testet the Vista x86 and Vista x64. In the x64 it doesn't install my Creative Webcam NX camera. It just finds it as an "unknown device", but in the x86 version it finds it during install and it works fine. Anyone who can help me out here? Because it seems like there will be no development of specific x64 vista drivers for this products. Thanks in advanced?\Thomas Hansen

I sadly have the same issue. It appears that there will be no x64 driver for the Creative Webcam NX. Due to the lack of support, I plan on purchasing 35?different BRAND of webcams for my new computer lab. Creative has lost my business.

Daqmx 9.02 on windows vista x64

I tried to install the latest daqmx drivers but it gave me a bunch of errors while installing NI-VISA and a bunch of other products. Eventually it finished installation but now nidevmon.exe does not start.
Here's what I'm trying to do:
I already have Labview 8.6 with daqmx 8.7 installed. I upgraded my application to Labview 2009 with daqmx 9.02 on another machine. Now I want to transfer that application to this Vista x64 computer. I also want to be able to run the older application (built using 8.6). I was hoping I could install 32-bit version of Labview 2009 along with the latest version daqmx and visa and then the upgraded application will work. Is it possible that the installation files were just corrupted? Can I install 32-bit daqmx on x64 vista? I don't really care about the memory usage limit right now.
Solved!
Go to Solution.

Hi abdel2,
DAQmx 9.0.2 should work just fine on Vista
x64. Are you getting an error about nidevmon.exe? Were you getting
these errors on the 64 bit machine? It sounds like you might have a
bad installation. Have you tried reinstalling DAQmx? Have you
restarted since you installed?
Installing LabVIEW on Windows Vista x64 Edition
Regards,
Jim Schwartz

No Audio - External Speakers - Running VISTA x64 Ultimate

I have seen numerous references to this problem in the forum archives... but no solutions yet.
I run Vista x64 Ultimate natively on the Mac Pro - no VMware or other emulation software.
Everything works great EXCEPT audio: I have searched and searched and need an expert.
All OSX, Firmware, and Bootcamp drivers are up to date.
Realtek Audio doesn't not recognize the rear external audio port. I plugged in / out / in etc., nothing. All audio comes from the internal tower speaker.
My speakers use the standard analog jack, they are new Bose MusicMonitor speakers.
Things I have done:
Vista Audio Settings - all ok, all set to max, double checked - nothing.
New Realtek Audio Drivers - tried installing newer version - nothing.
Reinstalled Bootcamp Drivers - nothing.
Reinstalled Bootcamp Drivers (original disk) + Bootcamp Vista Drivers (new release) - nothing.
BTW - the speakers work just great under OSX - they produce awesome sound - so it's not a hardware issue.
Thanks - I hoping someone has discovered a solution!

P.S. I have the X-Fi Platinum.
I left that out in my original post.

Vista x64, PCsuite 6.84, N80, bluetooth - NoGo.

Similar Messages

Maybe you are looking for