Vistex Set Up table content - DataSource /IRM/LIS_RM_IPBBITM

Hi Gang,
Our company is using Vistex, and we have installed the Business Content. I'm trying to initialize the delta process, but I am return no records. I am using the programs found in transaction code /IRM/IPBWSPRO to deleted and reload the set up table - still no records!
I'd like to confirm whether or not the set up tables are being filled.
Does any one know the technical name of the Vistx set up tables?
Or how to display the contents of the table?
Without an error message, it is very difficult to troubleshoot the problem.
John Hawk

Hi John,
Vistex, data sources, are provided as part of the LO Cockpit and you need to do the set up using a program, for filling set up tables and the rest is same as LO Cockpit data sources
In BW side, I dont think, we have any content delivered for Vistex Modelling. You may have to closely look at the Commission Management module which is delivered and utilise them for your BI Data Model for Billbacks. And theres going to be no issue with most of master data as the ECC ones are still in place for you Billback reports. and make sure that you set the Vistex namespace (Tx, SE06) before you go ahead for BI modelling.
Filling Setuptable :
Goto the transaction code /IRM/IPBWSPRO (Here you will fiind the Programs)to deleted and reload the set up table.
Regards
Ram.

Similar Messages

Extracting/Setting PDF Table contents using javascript

Hello,
Can you experts please let me know the following?
1. Is there a way to extract PDF table contents?
2. Can I set the row value via java script?
Bottom line is I need to implement editable table in PDF. What are the ways I can achieve this feat?
Thanking you in advance!
Best Regards

Hi PDL,
I am actually writing a piece (C++) of code that generates Acroform currently. It is still in the primitive stage, just provided support only for text fields, choice fields and buttons.
As I mentioned above, I have a requirement to generate a editable table...
Sure I can provide the PDF(acroform) that is generated by the code.
But how can I send the file to you? Can you share your email-Id? Or can I paste the content of the output here ?
%PDF-1.5
%%âãÏÓ
1 0 obj
<<
/Pages 2 0 R
/AcroForm 6 0 R
/Type /Catalog
>>
endobj
6 0 obj
<<
/CO []
/Fields [ 7 0 R 9 0 R 10 0 R 11 0 R ]
/NeedAppearances true
>>
endobj
2 0 obj
<<
/Type /Pages
/Count 1
/Resources
<<
/ProcSet 3 0 R
>>
/Rotate 0
/Kids [4 0 R ]
>>
endobj
7 0 obj
<<
/A 8 0 R
/BS <</W 1 /S /S>>
/DA (/Helv 12.00 Tf 0.00 0.00 0.00 rg 0 G)
/DR
<>
>>
/F 4
/FT /Btn
/Ff 65536
/H /P
/MK
<<
/BC[0.87 0.83 0.55]
/BG[1.00 0.94 0.55]
/CA(PDF Button)
>>
/P 4 0 R
/Rect [300.00 690.00 400.00 710.00]
/Subtype /Widget
/T (Button)
/TU (PDF Button)
/Type /Annot
>>
endobj
8 0 obj
<<
/S /JavaScript
/JS (if \(app.viewerVersion>=5\) {app.alert\("I-PDF 0.1 DEMO", 1\);})
>>
endobj
9 0 obj
<<
/BS <</W 1 /S /S>>
/DA (/Helv 12.00 Tf 0.00 0.00 0.00 rg 0 G)
/DR
<>
>>
/F 4
/FT /Tx
/Ff 12582912
/H /P
/MK
<<
/BC[0.00 0.00 0.00]
/BG[1.00 1.00 1.00]
>>
/MaxLen 45
/P 4 0 R
/Rect [200.00 750.00 400.00 770.00]
/Subtype /Widget
/T (Text Field1)
/Type /Annot
>>
endobj
10 0 obj
<<
/BS <</W 1 /S /S>>
/DA (/Helv 12.00 Tf 0.00 0.00 0.00 rg 0 G)
/DR
<>
>>
/F 4
/FT /Tx
/Ff 12591104
/H /P
/MK
<<
/BC[0.00 0.00 0.00]
/BG[1.00 1.00 1.00]
>>
/MaxLen 15
/P 4 0 R
/Rect [200.00 720.00 400.00 740.00]
/Subtype /Widget
/T (Text Field2)
/Type /Annot
>>
endobj
11 0 obj
<<
/DA (/Helv 10.00 Tf 0.00 0.00 0.00 rg 0 G)
/DR
<>
>>
/F 4
/FT /Ch
/Ff 67239936
/MK <</BG[0.87 0.83 0.55]>>
/Opt [[( )( )] [(AMX) (American Express)] [(CBL) (Carte Blanche)] [(DCL) (Diners club)] [(DSC) (Discover)] [(ENR) (EnRoute)] [(JCB) (JCB)] [(MSC) (Mastercard)] [(VIS) (Visa)]]
/P 4 0 R
/Rect [200.00 650.00 300.00 670.00]
/Subtype /Widget
/T (Choice)
/Type /Annot
/V (VIS)
>>
endobj
4 0 obj
<<
/Parent 2 0 R
/Annots [7 0 R 9 0 R 10 0 R 11 0 R ]
/MediaBox [0 0 595.00 842.00]
/Resources
<<
/ProcSet [/PDF /Text /ImageI /ImageC]
>>
/Contents 5 0 R
/Type /Page
>>
endobj
5 0 obj
<</Length 26>>
stream
q
BT
36 806 Td
ET
Q
0 0 m
endstream
endobj
3 0 obj
<<[/PDF /Text /ImageI /ImageC]>>
endobj
12 0 obj
<<
/BaseFont /Helvetica
/Subtype /Type1
/Encoding /WinAnsiEncoding
/Type /Font
>>
endobj
xref
0 13
0000000000 65535 f
0000000016 00000 n
0000000172 00000 n
0000002016 00000 n
0000001756 00000 n
0000001942 00000 n
0000000081 00000 n
0000000272 00000 n
0000000603 00000 n
0000000709 00000 n
0000001017 00000 n
0000001326 00000 n
0000002064 00000 n
trailer
<<
/Root 1 0 R
/Size 13
>>
startxref
2162
%%EOF

Set thesecond table content acording to the first table selected

Hi,
I have to table. Both table content will fill from SQL. My Question is How can i fill the second table content from the which value i select from first table. I have written code like this.
But when i click first element it will display the content in second table when i click next row it should change the content according to that. How can i do that.
Here is my code.
wdContext.currentContextElement().setVisiblity(WDVisibility.VISIBLE);
 int n = wdContext.nodeFirstTable().size();
 int leadSelected = wdContext.nodeFirstTable().getLeadSelection();
 for (int i=0;i<n;i++)
 if(leadSelected==i)
 IFirstTableElement ele=wdContext.nodeFirstTable().getFirstTableElementAt(i);
 Date datesec=ele.getMyDate();
 java.sql.Date datesec1=new java.sql.Date(datesec.getTime());
 wdComponentAPI.getMessageManager().reportSuccess(
 "lead selection " + i +"laed "+leadSelected);
 try{
 CallableStatement cStmt = con.prepareCall("{CALL Usp_TimeSheet_IUSDL1(?,?)}");
 wdComponentAPI.getMessageManager().reportSuccess(
 "lead selection " + datesec1.toString());
 cStmt.setInt(1,id);
 cStmt.setDate(2,datesec1);
 cStmt.execute();
 ResultSet rsDetail=cStmt.getResultSet();
 IPrivateEntryView.ISecTableElement sel=wdContext.nodeSecTable().createSecTableElement();
 while(rsDetail.next())
 wdComponentAPI.getMessageManager().reportSuccess("rsDetail first");
 String coun=rsDetail.getString(3);
 wdComponentAPI.getMessageManager().reportSuccess("Date "+coun);
 sel.setCountry(coun);
 String rdr=rsDetail.getString(5);
 wdComponentAPI.getMessageManager().reportSuccess("RDR "+rdr);
 sel.setBRR(rdr);
 String act=rsDetail.getString(6);
 wdComponentAPI.getMessageManager().reportSuccess("Act "+act);
 sel.setActivity(act);
 float hrs=rsDetail.getFloat(8);
 sel.setHrsWorked(hrs);
 String com=rsDetail.getString(10);
 sel.setComments(com);
 String sta=rsDetail.getString(15);
 sel.setStatus(sta);
 String appcom=rsDetail.getString(18);
 sel.setAppComments(appcom);
 wdContext.nodeSecTable().addElement(sel);
 rsDetail.close();
 catch(Exception e)
 wdComponentAPI.getMessageManager().reportSuccess(e.toString());
Regards,
H.V.Swathi

Hi Swathi,
For your requirement you can create two table say TableA and TableB.In Which the TableB vivibility is set to blank or none.
So first the data gets popolated in TableA. Now on click of row from TableA create a action and pass the value you want to pass and populate the TableB with the required data and make the vivibility of TableB to visible.
Again say on click of Row 2 of TableA you need to show the diffrent data in TableB so for that every time you need to invalidate the node first in that method.
e.g Vn_TableB_Node.inValidate();
Hope this will help.
please revert if you need more info.
Regards
Narendra

BI content datasource stopped working - fields gone missing...

Hi everybody!
My customer is running a BI content version datasource 2LIS_02_ITM.
In BI, the transfer structure for this datasource has suddenly stopped working. It's claiming that three fields are not delivered by the datasource in the source system.
example:
"Field MCEX_UEBTO will not be delivered from DataSource 2LIS_02_ITM in source system SPPCLNT300"
So I look in SBIW in R/3. I go to BI Content Datasources and further in to 2LIS_02_ITM. There I can't see the fields that the transfer structure in BI are needing. But when I continue to the extract structure for the datasource, MC02M_0ITM, I can see the fields that I'm searching for. Somehow they can't be chosen in the datasource.
So this has previously worked for years. When I check the delta queue, I can actually see records which has my desired fields included. So somehow the extraction are still working - my setup in BI are still the same, but it seems that the three fields are no longer included in the delivered version of the datasource in R/3
Any ideas on how to fix this?

Solution:
I went in to table ROOSFIELD. There I found the same thing that I saw in RSA2. The three fields had the attribute 'A'
So after a little time googling how to change fields in ROOSFIELD - I found this piece of code:
REPORT ZTEST_ROOSFIELD.
TABLES: ROOSFIELD.
UPDATE ROOSFIELD CLIENT SPECIFIED SET SELECTION = u2018Pu2019
WHERE OLTPSOURCE = u2018<Data Source name>u2019
AND OBJVERS = u2018Au2019
AND FIELD = u2018<Field to be made visible>u2019.
WRITE SY-SUBRC.
Worked like a charm!
The fields are once again visible in the datasource - and thus BI is happy again!
Thanks everybody for contributing to the solution to this problem. Points have been awarded!
//Anders

Set up table data extracted from R/3 not visible in data target of BW

Hai friends,
         I am currently working on extracting data from R/3 to BW. I read the several docs given in the forum and did the following:
1) In the LBWE transaction, my extract structure is already active.
2) In SBIW, i went to the filling of set up tables for QM
3) I executed the set up table extraction
4) Then, i checked in RSA3. The extraction was successful.
5) In BW, i replicated the datasource, and in the infopackage, i selected in the
      PROCESSING TAB, "PSA and then into Data targets (Package by Package)
6) In UPDATE tab, i selected FULL UPDATE
7) And then i did immediate load.
8) In RSMO, it showed successful. (It showed the same number of records as in the
      RSA3 of R/3)
          But when i went into the data target (ODS) and checked for its contents, nothing is visible. Why is it so? HAve i skipped any step? Please help.
Regards,
Neha Solanki

Hai,
       U r rite. It is an NW2004 system.This is what is displayed in the status tab in RSMO.
Data successfully updated
Diagnosis
The request has been updated successfully.
InfoSource : 2LIS_05_QE2
Data type : Transaction Data
Source system: QAS678
   And i can find no such button as u said.
Regards,
neha Solanki

How to change the Safety Intervals for standard Content datasources

Go to RSA2->give your datasource name ->setting up GEN delta
It shows you whts the safety interval setting.

How to change the Safety Intervals for standard Content datasources since when I go to RSA2 edit and change options are always greyed out. let me know if there is any other transaction code or table to do this.
Thanks
Soniya Kapoor

Hi Soniya,
1) try RSA6.....also RSA8 for additional info.
2) useful link:
http://help.sap.com/saphelp_nw04/helpdata/en/d0/4cc138944cfa06e10000000a11405a/content.htm
Good luck, BB

Unable to load Set up tables

Hi Guys,
while we are loading the set up tables we are getting the following error in OLIBW7 transaction "Error determining rate: foreign curr. MYR local curr. PHP date 23.02.2007"
I asked around the functional consultants and they informed that Currency Exchange Rate is not being loaded to D53 at all.
Can any one let me know how to fix this problem....
Thanks in advance

- Go to Transaction LBWE (LO Customizing Cockpit)
1). Select Logistics Application
       SD Sales BW
            Extract Structures
2). Select the desired Extract Structure and deactivate it first.
3). Give the Transport Request number and continue
4). Click on `Maintenance' to maintain such Extract Structure
       Select the fields of your choice and continue
             Maintain DataSource if needed
5). Activate the extract structure
6). Give the Transport Request number and continue
- Next step is to Delete the setup tables
7). Go to T-Code SBIW
8). Select Business Information Warehouse
i. Setting for Application-Specific Datasources
ii. Logistics
iii. Managing Extract Structures
iv. Initialization
v. Delete the content of Setup tables (T-Code LBWG)
vi. Select the application (01 Sales & Distribution) and Execute
- Now, Fill the Setup tables
hope this helps!!!

Not getting set up record in Set up tables

Hi ,
I am able to see revaluation records in MB5B (Stock on posting date) for one perticular posting date. but this record i am not able to see in Bw side ,even its not avail in RSA3 level.
So wat cud be the reason its avail in data base table but not filled in Set up tables ?
regards
raja

Hi vishwanath,
This is bcoz of
U have not done the delte delta queue( In LBWQ "MCEX03" entries).
first U have to delete the MCEX03 Entries ---> then only u have to do fill the setup tables.
follow these steps:
1.First goto LBWQ --> delete the MCEX03 Entries.
2.Refresh .
3.Check the datasources in RSA3 ( Datasources Should show Zero Records )
4.Do the Fill setup table.
5.Then check once again LBWQ ---> It should not have MCEX03 Entries.
6. Check Datasources in RSA3 ( Datasources should have data).
7.Do replication & Extarct data.
for ur problem this is the solution ( I have faced this).
Thanks,
kiran.

How to extract data into the set-up table for 2LIS_06_INV LIS structure

We are using ECC 6.0 and SAP BI NW 2004S. I activated the 2LIS_06_INV (Invoice Verification) structure. Interestingly, I don't see any Events under this structure (MC06M_0ITM) - my understanding is the events usually determine what type of data is generated for a given structure.
I see Invoice Verification when I use the Inventory Management -Perform Setup option when doing the set-up tables. However, when I use this option, I get a message saying " No extraction structure active or no BW connected".
Can someone list the pre-requisites and the steps to load the set-up table for the 2LIS_06_INV structure.
Thanks,
Sanjay

1: RSA5 Activate Data Source
2: LBWE Activate datasource again
3: SBIW Fill setup table 'Settings for Application-Specific DataSources (PI)'-> 'Initialization'->'Filling in the Setup Table'->'Application-Specific Setup of Statistical Data'->'Invoice Verification - Execute Reconstruction'

Problem in page overflow with table contents having control level

Hello members,
My scenario is to display table contents from (Master Page)MP1 and then overflow to MP2 and use the MP2 for the rest of the overflowed pages too. In the form context, the table has control level grouping on a field(F1), which is set in context, because of which we can sub total for the group of records based on field F1.
Take the scenario that the content area(CA1) of MP1 fits only 10 records and content area(CA2) of MP2 fits only 20 records.
Test scenario 1:
If the table contents have records upto 20, then MP1 gets filled with first 10 records and then MP2 with rest of the 10 records. This scenario works fine.
Test scenario 2:
If the table contents have records upto 5, then only MP1 with current 5 records gets filled. This scenario also works fine.
Test scenario 3:( ISSUE BEING FACED)
If the table contents have records upto 50,(which are more than the combined number of rows of MP1 and MP2) then no data is displayed on MP1 and data starts filling in next MP2 and only approx 22 records are visible where few even cross the content area of the MP2. And no over flow for the rest of the records happen.
We use SFP Transaction in SAP to modify the layouts of the forms. Please let us know if the table having group set by control level causes any issue in this scenarion Test scenario 3.
Thanks
Vivek
[email protected]

Hi,
master pages don't support page breaks. Those pages are only used for the background things of body pages like page numbers, company logs or letter head layouts.
Don't use repeating objects on masterpages that may overflow its content area, this will always end up with unexpected results.
Put all those objects on a regular page (body page) which allows page breaks.

Reinstallation of Business Content DataSource in SAP R/3

Hi All,
For one of the BCT (busines content) DataSource 2LIS_04_P_MATNR, we notice in our system that the Delta process has been changed from 'ABR' in the delivered version to 'D' in the active version due to which we are not able to have delta loads from this DataSource into an ODS.
We would like to change this back to the BCT delivered version, i.e. revert to the delta process 'ABR'. After we compare the active version with the delivered version in RSA5 the only difference is in the delta process and some field descriptions. Does anyone have any information on:
1. How we can reinstall the BCT provided DataSource?
2. How much time would this take?
3. Would it impact the current delta process whereby this DataSource is feeding various InfoCubes?
4. Would we need a reinitalization of delta for the current InfoCubes that this DataSource is feeding?
Appreciate your inputs.
Thanks,
-Rakhi

Hi Ashwin,
I was looking through many documents in search of answers to my questions so I do not remember which one I had looked at.
But, I guess I understood what I read incorrectly. I now manually changed the ROOSOURCE setting for delta process in the development system to 'D' (here the active and delivered version were 'ABR') and then did a 'Transfer DataSource', it changed the ROOSOURCE entry back to ABR!
So I guess you were right, I will go ahead with this approach.
Many Thanks for your help...you get my points
BTW, how does one uninstall the BCT DataSource in SAP R/3?
Cheers,
-Rakhi

API or Trick to Access Decision Table Content

Hi,
I am modeling a BPM process which calls web services based on a BRM rule with a decision table. In the beginning I need to read the decision table content into the BPM process context (in order to get the selection condition for reading objects from an SCM system). Is there a way I can access the content of this BRM decision table (via web service, java or any other way)?
Thanks,
Eduard

Hi Eduard,
From what I understand(from the post and my brief discussion with Michael Hill few days back), there are a set of work orders in the SCM system that you want to read and see if they meet the scrap tolerance level. But the Decision Table doesnt have scrap tolerance level defined for all combinations of product type/date etc.
So you want to
(1)initially get the parameters for which scrap tolerance is defined (read the contents of decision table)
(2)get only those work orders from the SCM (filter outside rules)
(3)check if these work orders satisfy the scrap tolerance level (rule execution)
Please correct me if I am wrong.
Can we remove the steps (1) and (2) and instead get all the work orders from the SCM system and see if they satisfy the scrap tolerance level(only rule execution, filtering is also done in rule). For work orders whose scrap tolerance is not defined, the decision table will not return the default value. So if the default value is returned(filtering), no check is made if scrap is within tolerance.
Please let me know your opinion.
Regards,
Sowmya

Problem about fill set up table

Hi all,
I got a problem when I run the fill set up table for sales billing data source. what I did is:
first delete the setup table then oli9bw->type in a sales document no.(as I only want this order data), then give a run name, last execute, but I got the message as follow:
Data source 2LIS_13_VDITM contains data still to be transferred
Could you pls explain what this means, and what should I do to solve the problem
Thanks

Set up table definition
Setup table is store the historical data, where as the delta records are updated in delta queue not to set up table.
So once historical data is loaded you can delete the contents of the set up table.
name is extract sturcture of your data source + setup
also data is taken from setup table when an init / full/ full repair load is done.
so in order to take ur records from the table delete the setup table(LBWG) and initialize it with ur records.
You can find the contents SE16
Filling set up tables
transac LBWG
+ SBIW -> Logistics -> Managing Transfer Information Structures-> Setup of Statistical Data-> Application-Specific Setup of Statistical Data
set up tables
Set up tables
Set up tables
view of set up tables data in se11??????????
Set Up tables..
lo: delete set up tables: DOUBT
LBWQ is the extraction queue and RSA7 is delta queue. Data is sent to delta queue from extraction queue through collective job scheduled in transaction LBWE.
when we want to extract the data using LO Cockpit, the data will be come to the extraction queue first and from there it will processed to the delta queue. SO lbwq works as a outbound queue.
If the update mode is Unserialised V3 then as soon as the document is posted it comes update table which you can see in Tr. Code SM13. After the jonb is scheduled the records come to RSA7 i.e delta queue from which BW pulls the data
If you use u201CQueued Deltau201Dupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
So in If you are going to do Setup table filling, delete the data from LBWQ.
The usage of Extraction queue(LBWQ) comes in to picture in delta loading. But actually system starts collecting the data (whenever there is document creation in R/3) after activating the EXtraction structure.
Steps to Be Performed
We know that there are 4 types of delta extraction that are available in LO. If you use u201CQueued Deltau201Dupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
Here is Roberto's weblog:
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
check this out...
LBWQ - T code is for what?
Ttransaction LBWQ
What is LBWQ?
Assign points if it helps
Hope it helps
regards
Bala

Purchasing set up table

hello,
i am customizing the lo cockpit for purchasing in the following datasources:
2lis_02_hdr
2lis_02_itm
2lis_02_scl
the problem lies when i am filling the set up table using oli3bw. i get the following message:
"DataSource 2LIS_02_HDR contains data still to be transferred"
this activity was performed 3 days back & that point of time i had given the next day as the termination date.
can anyone help me out on this issue?
any help would be greatly appreciated.

"DataSource 2LIS_02_HDR contains data still to be transferred"
this means that there is data in the update queue or delta queue for this extractor. if your in production follow the exact guidelines that you can find on this forum. you have to do this in the weekend. stop the v3 update job (run it one last time manually), extract your delta twice and transport the modifications.
if you don't care too much about your data cause you have to reinit anyway, just kill the delta queue

Read SAP table content through VBA why Chinese characters display as '#'

Hi ,
I meet a problem . I want to get sap table content through RFC in excel VBA. now i have solve it . It can got table content . when i change a new system , it can get table content ,but chinese characters display as '#' ( it works well in sap 4.6c Chinese characters can display , when upgrate to ecc 6.0 it can't works well )
some VBA code as below :
Set ofun = CreateObject("SAP.FUNCTIONS") ' create a FUNCTION object
   ' Connect has create and conneted to SAP system
Set ofun.Connection = Connect                     ' "connect"has create connetion sucess
Set func = ofun.Add("RFC_READ_TABLE")    ' set RFC object to call function
    func.Exports("QUERY_TABLE") = "T179T"   ' set table name for get table content
    func.Tables("OPTIONS").DATA = "SPRAS   =   'ZH'"    ' set condition of language of 'ZH'
If func.Call = True Then
        Set oline = func.Tables.Item("DATA")       ' set table content which get from table T179T to object "oline"
endif
who can give me some suggestion about this ? Thanks .
Edited by: Chris Xu on Oct 31, 2008 6:51 AM

Hi Chirs,
I am facing the same problem but i am using c sharp and this is a windows application.
I tried to change the CodePage attribute by simply setting connection.codepage = "8040";
But i get an exception.
attempted to read or write protected memory.
I cant seem to change this. What should i do. Also do we have to set this at the point of connecting to the Sap system or when i'm calling the RFC. I tried both instances but none worked. Could you please help me out.
i am using VS 2008.
Thanks,
Yohan

Vistex Set Up table content - DataSource /IRM/LIS_RM_IPBBITM

Similar Messages

Maybe you are looking for