Visual Admin disappears after putting user credential

Hi,
We have applied SPS16 in XI (2004s) and after that Visual admin is not
coming up.
Now after applying the support pack in dev box, Visual admin is not
coming up. It ask for user id and password and after putting the
password it does not take you to another screen.The screen just disappears.
Please let me know if anybody came across such situation before.
Thanks for your help.
Suhas

Suhas,
Make sure your DB is online, P4 port/password is correct.
[http://help.sap.com/saphelp_nw04/helpdata/EN/71/540c404a435509e10000000a1550b0/content.htm]
Hope this helps.
Manoj

Similar Messages

Classic - Printer port (USB 1) disappears after switching User

I have used an Epson SP785EX on my iMac G5 under OSX 10.3 for months without trouble. I upgraded to OSX 10.4.8 and are constantly loosing this printer expecially when printing from Classic. After having tried everything including resetting the printing system it is still not clear what exactly causes the loss of the USB Port. However it may have to do with restarting or switching users. When in the chooser after selecting the original Epson Printer driver (which I have reinstalled many times) the Port (USB 1) does not show in the 'choose printer port list' (nothing at all shows). I have also tried the 'LaserWriter 8' solution which I do not understand. Perhaps someone can explain or point me to some literature. LaserWriter 8 shows in the Chooser but again nothing shows on the right pane of the Window. I am stabbing in the dark with this. Any help will be apprecated.
Thanks - Stefan
iMac G5 Mac OS X (10.4.8) Powerbook G4
iMac G5 Mac OS X (10.4.4) Powerbook G4

I have used an Epson SP785EX on my iMac G5 under OSX
10.3 for months without trouble. I upgraded to OSX
10.4.8 and are constantly loosing this printer
expecially when printing from Classic.
The printing subsystem changed considerably between Panther & Tiger. In Panther, you had to have a working OS 9 driver in order to print from Classic. This caused problems, particularly with certain HP printers which had OS 9 drivers which were not properly coded, and with newer printers which did not have and never would have OS 9 drivers.
In Tiger, things have changed. The default driver is the LaserWriter driver. You don't have to do anything, not even select the driver. The print system will print to the LaserWriter driver and the LaserWriter will print to the OS X driver for your printer. (This, of course, means that there must be an OS X driver for that printer...)
After having
tried everything including resetting the printing
system it is still not clear what exactly causes the
loss of the USB Port.
Classic does not have direct access to hardware, including USB ports.
However it may have to do with
restarting or switching users. When in the chooser
after selecting the original Epson Printer driver
(which I have reinstalled many times) the Port (USB
1) does not show in the 'choose printer port list'
(nothing at all shows).
This is normal.
I have also tried the
'LaserWriter 8' solution which I do not understand.
Just print, normally. The LW8 dialog box will pop up. You can then select the printer you want to use. (I have several printers on my system, two HP inkjets, a Brother laser, a label printer, a fax modem, and Adobe PDF)
1 type cmd-p or however you normally print
2 select the printer from the pull-down menu on the LW8 dialog
3 print
4 the system will hand off the print job to the proper OS X print queue, which will then print the file. If you're printing in color to a color printer, you'll get color output. If you're printing to Acrobat Distiller, you'll get a PDF. If you're faxing, you'll get the fax dialog so you can enter your dialing & cover sheet info.
Perhaps someone can explain or point me to some
literature. LaserWriter 8 shows in the Chooser but
again nothing shows on the right pane of the Window.
I am stabbing in the dark with this. Any help will be
apprecated.
Just print. That's all.
Thanks - Stefan
iMac G5
Mac OS X (10.4.8) Powerbook
G4
iMac G5
Mac OS X (10.4.4) Powerbook G4

Problem visual admin java parameters

Hi guys,
I just wanna know in the visual admin, how to put a new java parameters ?
I can't press enter and had a new line ... Can someone had a parameter ? Not a change but a new one ?
Thanks.

yes it is ! had a parameter in the config tool !
-Xbootclasspath
-Dcom.wily.introscope-agentProfile
-Dcom.wily.introscope
By the documentation Introscop Version 8 Installation Guide For sap June 2009 page 27
I can modify the parameters, but not had a new line, so not had a newx parameter

User settings suddenly disappeared after flashplayer update

my user settings suddenly disappeared after flashplayer update

You may have logged in as a different user, such as Guest. Open the Users & Groups pane in System Preferences. Your name should be at the top of the user list, under Current User. See also this support article.

SP 2010-After adding user from IIS is not found in central admin

Hi Experts,
I am trying to configure my SP 2010 with Form Based Authentication.
After configuring WebSite, STS and Central Admin I added the user from IIS , But not able to found from central admin in Form Authentication.
I checked in database the user is added.
I followed the below blog .
http://jasear.wordpress.com/2012/03/16/sharepoint-2010-setting-up-form-based-authentication-fba-using-asp-net-sql-membership-provider/
Can experts help me how to get the added user to central admin.
Thanks
AshisK

I was finally able to get the FBA working. After many failed attempts, I knew there was a configuration issue which was causing the error.
I provided connection string and provider details at 4 places, instead of the 3 mentioned in various blogs around ->
1. Sharepoint Central Admin
2. Sharepoint Web Services
3. SecurityTokenServiceApplication
4. And finally the web application itself.
The connection string for 2nd and 3rd will remain same however, provider details need to be added.
After completing this step, I was able to login using Form Based Authentication without an issue.
AshisK

Visual Admin -- Granting login to other users

I want to be able to allow other user accounts to get into Visual Admin. I gave these user accounts the super_admin role, but I still get the Error while connecting. Can someone point me to documentation on doing this if it's possible. I search help.sap.com, notes on service.sap.com, and all of SDN but didn't find anything.
Thanks.
Regards,
Mel Calucin
Bentley Systems

Thanks! It works!
Regards,
Mel Calucin
Bentley Systems

After putting an entry into the calendar it disappears after a few seconds

Calendar entries disappear after a few second and do not sync between iPad and iPhone.

Hi,
Go to c: program files*86:common: adobe: sl cache, rename the sl cache
Go to c: program data: adobe: sl store: rename the sl store to old sl store.
Right click on premiere pro and run as admin.
Thank You
Arjun

Why does the pop up window for a printable coupon only appears briefly (in the upper left corner) and then disappear, even after putting the web site into the Tools,Options,Content,Pop-Up Exceptions?

I am at http://www.closys.com/samples_&_coupons/get_a_coupon.html and the pop up window for a printable coupon only appears briefly (in the upper left corner) and then disappears, even after putting the web site into the Tools,Options,Content,Pop-Up Exceptions. What gives and how can it be fixed. I have a time limit.
Thanks for your solution.
Dan

Mha007:
Sorry, but I have already tried this too and verified that the web addresses are listed as Allow, rather than Block. After restart there was no difference, I still get the disappearing pop-up windows.
Thanks for offering suggestions though.
Have you heard of any issues like this occurring based on the number of tabs that are open in Firefox?
Just a thought, even though I have not heard of this as an issue before. I keep about 80 tabs open regularly, because of research that I am always conducting (I am a blogger, a writer/author, a technophile-especially Green Tech.,), email, work, etc.?
I do have a check in the box for Firefox to let me know if the number of open tabs is causing slow down or other issues.
Thanks for any help.

Visual Admin: error on loading service Web Services Security ? HELP

I wanted to consume a webservice to a remote R3 ECC 5 webservice with Visual Composer.
I added a web service client for VComposer using visual admin as:
Cluster->services->webServicesSecurity->
SecurityConfiguration->WebServiceClients->DynamicWSProxies->New
Added the remote host to R3 ECC5
<b>http://<host>:8000/inspection.wsil</b>
I keyed in the SID, client and language as per /people/community.user/blog/2007/04/04/consuming-webservice-in-visual-composer-1 .
I changed the security authentication to Basic and keyed in right user and password, saved the data.
It worked fine.
After I changed few values for SID, user, password on this properties, it gave me ERROR on loading service Web Services Security.
Can you please help to reset and put back the old config.
Thanks;

Thanks, I restarted it after an hour, it is working fine.

Yosemite install has messed up my home folder after fixing user short name.

I just installed Yosemite 10.10.2 onto a new Mac Pro, replacing 10.9.5. After the installation completed, I allow my iCloud settings the set things up for Mail and my other general account settings. The only issue is that when I changed my short name from timjones to tjones, auto correct changed it to tones (as it has done in this post 2 times). Once I recognized this, I used the normal method for modifying a user account by logging in under another admin account, using ditto to copy the '/Users/tones' folder to '/Users/tjones', selecting the Tim Jones account in Users and Groups and using the Advanced Options to reset the short name to tjones. I then reassigned the home folder to /Users/tjones.
All seemed to go well and when I logged back in as tjones. However, I could no longer set up my preferences for apps nor could I access my mail. I then clicked on the 'tjones' home folder in Finder and was greeted with a dialog that said 'Preparing to duplicate items to "Users"'. It then spun for around 2 minutes and prompted me for my password. I entered it and the dialog changed to 'Duplicating 0 items to "Users"' and it's now been spinning for around 15 minutes.
What is this and am I back at square one and reinstalling (I have good backups...)?

The "Duplication" finished finally and my home folder has now disappeared from the /Users folder in Finder. If I check in a Terminal, there are now 2 folders - 'tjones' which is set to tjones:wheel and 'tjones copy' which is set to tjones:admin. As mentioned, neither is visible in Finder.

LCRSAPRFC is missing in Visual Admin (JCo RFC Provider)

H y,
I'm facing a problem while connecting our SolMan via RFC to SLD.
Found documents explainig how to set up connection to SLD.
SAPSLDAPI (was present in Abap and Java - wrong credentials - repaired)
LCRSAPRFC (only present as RFC CONN in ABAP, but missing in Java, Visual Administrator JCo RFC Provider
How can be the LCRSAPRFC added to JCo RFC Providers?
Do I have to create the RFC Conn LCRSAPRFC again in Abap/SM59 to get the LCRSAPRFC visible again in Visual Admin?
Thanks in advance
Tom

Hi,
Do I have to create the RFC Conn LCRSAPRFC again in Abap/SM59 to get the LCRSAPRFC visible again in Visual Admin?
Not Required.
LCRSAPRFC (only present as RFC CONN in ABAP, but missing in Java, Visual Administrator JCo RFC Provider
Usual Process
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination:LCRSAPRFC
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: LCRSAPRFC_<SID>
where <SID> is the SAP system ID of your Integration Server host.
Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host.
To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and
gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in
Target System.
8. Save your settings.
Java Stack
SAP J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the SAP J2EE
Engine administration tool.
If you do not know how to start, see section How to start the SAP J2EE Administration Tool .
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for LCRSAPRFC that you used in the step Maintaining the RFC connection above.
Additionally, set the number of processes to 3.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client
and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
Testing
After you have maintained an RFC destination in both the ABAP and Java environment,
you can check it as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection.
No error should be displayed.
Regards,
Rao.Mallikarjuna
Edited by: Rao Mallikarjuna on May 31, 2008 11:40 AM

Error in connecting Visual Admin.

Hi all , postong a new therad.
after appying some of the patches we are unable to connect into Visual administrator.The Pop up says:
com.sap.engine.services.security.except
ions.BaseLoginException: Can not
create new Remote LoginCOntext.
Any clue on this :
Thanks.

Hi,
If you no longer connect to the Visual admin it is better change the password of the user j2ee_admin as mentioned bellow
You have to change the J2EE Engine administrator password in the secure store as follows:
1. Start the Config Tool by executing the /usr/sap/<SID>/<Instance name>/j2ee/configtool/configtool script file.
2. Select secure store.
3. Select the admin/password/<SID> entry.
4. Enter the J2EE Engine administrator user new password in the Value field and choose Add.
5. Choose File -> Apply to save the data.
6. Restart the J2EE Engine
Also check this PAG for java Problems.
[http://help.sap.com/saphelp_nw04s/helpdata/en/6C/7FFB3F6C78EE28E10000000A1550B0/frameset.htm]
Regards,
Dhruv Shah

Visual Admin: Log Viewer not opening

Hello all,
I have logged in to Visual Admin with J2ee_admin user, the Log viewer service is not working properly.
As I am clicking Log viewer, the Visual admin getting hang.
Regrads,
Shanker C
Edited by: shanker c on Jul 29, 2009 8:25 AM

Thanks to all,
Solution is given in above suggested SAP note.
There are huge number of archives in cluster nodes and dispatcher. after removing it the Log Viewer is working fine.
Thanks,
Shanker C

Visual Admin Issue

Experts ,
I want to know about Visual Admin and ConFig Tool and in How many ways they are used
list out all briefly ,
Thanks in Advance,
Phani

Hi Phani,
The J2EE Engine Visual Administrator is a graphical user interface (GUI) that enables administration of the whole cluster, all cluster elements, and all modules running on them. It provides remote monitoring and management of managers, services, libraries, and interfaces working on each element in a single GUI
Visual Administrator includes functions for:
a) Obtaining general information about a service, manager, interface, or library (for example, its name, group, and so on).
b) Logging on to the J2EE Engine via the Visual Administrator tool
c) Administrating and changing the properties either specific or common for each service or manager
d) Configuring the global properties
e) Runtime administration and control.
Read out more about its features on [VISUAL ADMINISTRATOR|http://help.sap.com/saphelp_nw04/helpdata/en/39/83682615cd4f8197d0612529f2165f/frameset.htm]
CONFIG TOOL :-
The Config Tool enables offline configuration of the J2EE Engine cluster elements. It is XML-based and allows exporting the system configuration for later use.
When you run the J2EE Engine Config Tool via a GUI or text-only interface, it connects to the database and scans the server configuration. The information provided is passed to the corresponding interface that is used for configuration.
Each change you can perform corresponds to a particular task in the Batch Config tool.
All modifications made using the J2EE Engine Config Tool can be exported to an XML file for later use.
two types:-
a) GUI Config tool :- The J2EE Engine GUI Config Tool enables offline configuration of J2EE Engine cluster elements concerning serviceu2019s and manageru2019s properties, adding new server processes, changing Java parameters, exporting the system configuration to an XML file, and so on.
After installing the SAP Web AS Java, a configtool directory is created, containing a configtool script file. Double clicking on this file starts the Config Tool.
b) Text Only Config tool:- The text-only Config Tool enables you configuration of J2EE Engine cluster elements using a text-only based interface. It enables you to change the cluster element properties, JVM settings, add new elements, export the system configuration to an XML file, and so on.
After installing SAP Web AS Java, a configtool directory is created under <SAP_install_dir>/<system_name>/<instance_name>/j2ee, containing a consoleconfig script file. Double clicking on this file starts the text-only Config Tool.
Read more about config tool on [CONFIG TOOL|http://help.sap.com/saphelp_nw04/helpdata/en/e8/f48b33f9a3423c9e688dfa56330e79/frameset.htm]
Hope this helps,
Regards,
Shailesh

Visual admin tool&configer tool

whta is main difference of visual admin tool&configer tool

Hi Raghava,
This is a post by some gentleman, I tried figuring out the thread but could not succeed.
VISUAL ADMINISTRATOR
The J2EE Engine Visual Administrator is a graphical user interface (GUI) that enables administration of the whole cluster, all cluster elements, and all modules running on them. It provides remote monitoring and management of managers, services, libraries, and interfaces working on each element in a single GUI
Visual Administrator includes functions for:
a) Obtaining general information about a service, manager, interface, or library (for example, its name, group, and so on).
b) Logging on to the J2EE Engine via the Visual Administrator tool
c) Administrating and changing the properties either specific or common for each service or manager
d) Configuring the global properties
e) Runtime administration and control.
Read out more about its features on VISUAL ADMINISTRATOR.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/39/83682615cd4f8197d0612529f2165f/frameset.htm
CONFIG TOOL :-
The Config Tool enables offline configuration of the J2EE Engine cluster elements. It is XML-based and allows exporting the system configuration for later use.
When you run the J2EE Engine Config Tool via a GUI or text-only interface, it connects to the database and scans the server configuration. The information provided is passed to the corresponding interface that is used for configuration.
Each change you can perform corresponds to a particular task in the Batch Config tool.
All modifications made using the J2EE Engine Config Tool can be exported to an XML file for later use.
two types:-
a) GUI Config tool :- The J2EE Engine GUI Config Tool enables offline configuration of J2EE Engine cluster elements concerning serviceu2019s and manageru2019s properties, adding new server processes, changing Java parameters, exporting the system configuration to an XML file, and so on.
After installing the SAP Web AS Java, a configtool directory is created, containing a configtool script file. Double clicking on this file starts the Config Tool.
b) Text Only Config tool:- The text-only Config Tool enables you configuration of J2EE Engine cluster elements using a text-only based interface. It enables you to change the cluster element properties, JVM settings, add new elements, export the system configuration to an XML file, and so on.
After installing SAP Web AS Java, a configtool directory is created under <SAP_install_dir>/<system_name>/<instance_name>/j2ee, containing a consoleconfig script file. Double clicking on this file starts the text-only Config Tool.
Read more about config tool on CONFIG TOOL
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e8/f48b33f9a3423c9e688dfa56330e79/frameset.htm
Hope this helps.
Cheers,
Sandeep Tudumu

Visual Admin disappears after putting user credential

Similar Messages

Maybe you are looking for