Visual Admin tool in Read only mode?
HI
is it possible to access the Visual Admin tool in Read only mode. if Yes then How? if No then why?
Regards
Shridhar Gowda
Hi,
check with links, you may get some info, but i am not sure.
Check some VC roles and assign those roles for perticular users for full and read only.
1. http://help.sap.com/saphelp_nw70/helpdata/EN/7a/a0e84240857076e10000000a1550b0/content.htm
2. https://admin.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/659c082e-0c01-0010-2e9f-ac674cfff2d2
3. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0bf413a-66a6-2a10-8eb7-91b9e99c4a97
Regards,
Srini Nookala
Edited by: Srini Nookala on Aug 26, 2008 4:02 PM
Similar Messages
-
Visual admin tool&configer tool
whta is main difference of visual admin tool&configer tool
Hi Raghava,
This is a post by some gentleman, I tried figuring out the thread but could not succeed.
VISUAL ADMINISTRATOR
The J2EE Engine Visual Administrator is a graphical user interface (GUI) that enables administration of the whole cluster, all cluster elements, and all modules running on them. It provides remote monitoring and management of managers, services, libraries, and interfaces working on each element in a single GUI
Visual Administrator includes functions for:
a) Obtaining general information about a service, manager, interface, or library (for example, its name, group, and so on).
b) Logging on to the J2EE Engine via the Visual Administrator tool
c) Administrating and changing the properties either specific or common for each service or manager
d) Configuring the global properties
e) Runtime administration and control.
Read out more about its features on VISUAL ADMINISTRATOR.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/39/83682615cd4f8197d0612529f2165f/frameset.htm
CONFIG TOOL :-
The Config Tool enables offline configuration of the J2EE Engine cluster elements. It is XML-based and allows exporting the system configuration for later use.
When you run the J2EE Engine Config Tool via a GUI or text-only interface, it connects to the database and scans the server configuration. The information provided is passed to the corresponding interface that is used for configuration.
Each change you can perform corresponds to a particular task in the Batch Config tool.
All modifications made using the J2EE Engine Config Tool can be exported to an XML file for later use.
two types:-
a) GUI Config tool :- The J2EE Engine GUI Config Tool enables offline configuration of J2EE Engine cluster elements concerning serviceu2019s and manageru2019s properties, adding new server processes, changing Java parameters, exporting the system configuration to an XML file, and so on.
After installing the SAP Web AS Java, a configtool directory is created, containing a configtool script file. Double clicking on this file starts the Config Tool.
b) Text Only Config tool:- The text-only Config Tool enables you configuration of J2EE Engine cluster elements using a text-only based interface. It enables you to change the cluster element properties, JVM settings, add new elements, export the system configuration to an XML file, and so on.
After installing SAP Web AS Java, a configtool directory is created under <SAP_install_dir>/<system_name>/<instance_name>/j2ee, containing a consoleconfig script file. Double clicking on this file starts the text-only Config Tool.
Read more about config tool on CONFIG TOOL
http://help.sap.com/saphelp_erp2005vp/helpdata/en/e8/f48b33f9a3423c9e688dfa56330e79/frameset.htm
Hope this helps.
Cheers,
Sandeep Tudumu -
HI
I have recently installed SAP ENTERPRISE PORTAL
Now,I need to do some changes in the visual admin tool
I browsed to following loaction in my personal computer where I have installed SAP EP
c:\usr\sap\CE1\J00\j2ee\JSPM
There I See the file go.bat Once I click on that I see blank command prompt window being get displayed.
What are the settings I need to perform inorder to open the VISUAL ADMIN TOOL
Thanks in advanceHi Rev,
1> Your Visual admin tool is located in folder
"C:\usr\sap\CE1\JC00\j2ee\admin".
JSPM is another tool used for upgrade or appling *.SDA or *.SCA files.
2> There is also web based tool called NetWeaverAdministrator located under alias http://<hostname>:<port no.>/nwa .
3> Also set the path for JAVA_HOME in environment variable.
4> If the locked account is the only administrators account, follow the instructions in note 669848.
5> If you no longer connect to the Visual admin it is better change the password of the user j2ee_admin as mentioned bellow
You have to change the J2EE Engine administrator password in the secure store as follows:
a. Start the Config Tool by executing the /usr/sap/<SID>/<Instance name>/j2ee/configtool/configtool script file.
b. Select secure store.
c. Select the admin/password/<SID> entry.
d. Enter the J2EE Engine administrator user new password in the Value field and choose Add.
e. Choose File -> Apply to save the data.
f. Restart the J2EE Engine
Regards,
Manomeet
Award points if helpful ** -
Querying up AR Customer OA page in read-only mode for a Single Customer
We are building a Custom Form in which associated Customer <defined in AR> would be queried up.
Now we want to give an option to the User to view the complete details of the Customer. We would be giving a menu option in Tools 'View Customer' thru which he would see the Full Customer Details. <AR Customer OA page>
We have two requirements
1> The Full Customer Details should show up in Standard OA Customer Page the moment page comes up. The user should not be required to query the details.
2> It should be read-only and user should not be able to update any field.
How can we achieve this requirement? I did some RnD but did not see any place in EBS where we display the Customer Page in read-only mode and that too quried up for one particular customer.
Thanks
ArunHi Arun,
Please let me know if find any solution for this. We have a similar scenario in which we need to call the customer Page with all the inforamtion populated, related to one customer.
Thanks in advance,
Mannuru -
Planning Webform IN Read Only Mode
Hi,
All the webforms that i created in Planning 11.1 is in read Only mode. Non of the webforms have"Make Read Only" Checked nor the members used are Dynamic calc. I tried logging in using admin but that not solve the issue either. I can send in the data using excell add in but not throught planning. I dont see any more option to adjust this.Hi,
Another thing to check is the plan type you have set the form against and the source plan type for the account member on the form.
For example if you have a form set against plan type 1 and the account on the form has a source plan type of plan type2 then the form will be read only.
Cheers
John
http://john-goodwin.blogspot.com/ -
Gurus,
I have three essbase databases in my environment, and I am planning to run a command to sync the three dataases.
During the sync process, I do not want the users to log in to any of the databases, meaning I dont want users to have access to any of them or change any data in the databases.
Is there a way where I can put the databases in 'read-only' mode so that I can run the command.
Or is there any other script or any process I can use so that users wont have access until I complete the sync process.
Any suggestion is appreciateD
ThanksMaxl would probably be your best bet since you are likely using it with the data migrations.
alter application "appName" disable connects; /* nobody lower than applciation manager can connect */
This has a number of options
- disable updates
- disable commands (Prevent all requests to databases in the application, including non-data-specific requests, such as viewing database information or changing database settings. All users are affected, including other administrators. Administrators are affected by this setting as a safety mechanism to prevent accidental updates to databases during maintenance operations.)
More detailed info is at http://docs.oracle.com/cd/E17236_01/epm.1112/esb_tech_ref/maxl_altapp.html.
Kyle Goodfriend
https://www.in2hyperion.com
EDITED
If this is a planning application, you will also want to deal with those connecting to Essbase through Planning. This is handled through the Application Mode (see http://in2hyperion.com/post/2012/09/26/Change-Application-Maintenance-Mode-via-Command-Line.aspx on automating). Keep in mind, any connection from Planning to Essbase uses an admin ID, not the user ID.
Edited by: Kyle Goodfriend on Oct 4, 2012 12:02 PM -
Write-protect mode is currently active. The editor is now in read-only mode
How do i get the portal out of write protect mode. No matter what i change to do, i get the message
Write-protect mode is currently active. The editor is now in read-only mode.
this shows up in the log
10/06/10 16:21:21 - ERROR: Not deployed. Deploy Service returned ERROR:
java.rmi.RemoteException: Cannot deploy application sap.com/com.sap.pct.bi.tct.BI_Administration..
Reason: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Exception during
deploy: Import aborted - write protect mode is active.Hi David,
Do the following steps:
1. Start the Visual Administrator .
2. Choose Global Configuration u2192Server u2192Services u2192com.sap.portal.pcd.gl .
The properties of the service are displayed:
a. Pcd.Pl.WriteProtectActivated defines whether or not write-protect mode is activated. By default it is set to false .
b. Pcd.Pl.WriteProtectCause describes the reason that write-protect mode is activated. This information appears in the log files.
3. Deactivate write-protect mode by entering false as the value for Pcd.Pl.WriteProtectActivated .
4. C lick Update and then click Save .
A confirmation dialog box opens.
5. To apply the changes to all cluster elements, click Yes .
6. To reset the default values, click the Reset Default Global Properties icon .
This will deactivate the write protect mode.
Thanks and Regards,
Syam. -
How to modify edit/read mode pop up for documents in "SP2013" to open in only read only mode
Hi,
When opening a document the users of my site and including me are getting a pop up asking to open it in read only or edit mode. We want to disable the edit option for end users. Those are confidential doc's.
We want them to open only in read only mode. How can it be achieved.
Can we FORCE a read-only open of the document without giving anyone the option to open in edit mode? I don't have access to Central Admin. Hence kindly let me know if there is some javascript
code that i can use to do this from browser.
thank you !Hi Prajk,
If users have edit permission on the documents in this library, even if we disable this dialog (by disabling the add-on "SharePoint OpenDocuements class" from IE browser), the users sitll could download the documents to local machine, and
edit the documents in client Office application, then sync to library.
If you want the users to read these confidential documents only, you can only grant the users read-only permission on the document items or on library level, then they could unable to edit these confidential docs, note to give proper users
proper permissions.
If you also want that the confidential docs could be opend and read-only in client Office application, you can configure the IRM (implemented by RMS) for SharePoint server, then set the document items in the library read-only for
some users.
https://technet.microsoft.com/en-us/library/hh545607%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
https://support.office.com/en-in/article/Apply-Information-Rights-Management-to-a-list-or-library-6714cfe3-ef39-43b0-bb65-a887726bb63c?CorrelationId=ebcf6a01-1d3c-4b75-86ae-c11322065be6&ui=en-US&rs=en-IN&ad=IN
Thanks
Daniel Yang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Virsa application components not found in Visual Admin tool (GRC AC 5.3)
Hi experts,
I have this weird issue. I was trying to run the background job to synch the backend roles, users and profiles in CC. But when I checked the background job deamon through this link
http://209.207.245.71:50000/sap/CCADStatus.jsp , the screen was blink.
I searched and found this note #999785.
When I looked for the " virsa/ccxsysbgear application" through the Visual Administrator, I could not find any of the Virsa components application in our GRC server under this path:
Visual Admin --> cluster tab --> deploy folder --> virsa/* (all components)
We have AE, FF configured and running in our development server. Now I am configuring the CC and found all the virsa application services are missing.
We are implemented GRC Access control 5.3 . Any ideas how to get these components deployed and running in the Visual Admin tool??
Some of the sample deployed components are
1. virsa/ccxsysbgear application '
2. virsa/ccume
3. virsa/AEume
4. virsa/ccxsysbher etc
Greatly appreciate your help!
Thanks
SiriI found these files with the new name.. There is no virsa tag for these files.
-
Problem:Member is Read only Mode after login with other user
Dear,
I am facing problem to enter the data in member. i.e Read only. but same member is fine with login with admin user.
I also assign the security with write permission to user. but the only that member "X" is in read only mode..
Is task list can effect on that??? as i am also using task list. Becoz when i add another member that is not member of that hirechiary its fine.
I am working on hyperion version 11.1.2.1..
Regards,
AMSIThanks, Problem has been solved myself becoz when i add new member in the form as this form is already part of Planning Unit Hierarchy , that's why the newly added member in the form can't be write only till up to when u add this member into Planning Unit Hierarchy.
Regards,
AMSI -
How to provide a LINK on normal TEXT field in read only mode
Hi,
I have a TEXT item and that is used for only url purpose.
so a user can enter something like http://www.abc.com in that field.
So when I am in read only mode for that item, I want a link also on that text..
how can I do that.
thanks,
DeepakYou could create a pl/sql expression computation on the TEXT item which will convert the value shown for the field to be a HTML link
'<a href="http:// ' || :PXX_TEXT || '">' || :pXX_TEXT || '</A>';Make the computation conditional using the same condition as is used to render the item as read-only
varad -
Issue regarding open word file and read only mode using c# & MS-word interop
i am programmatically open a word file for search and highlight keyword. my routine is working fine. the problem is when i am opening the file programmatically then a dialog come and ask me to open file in read only mode. the dialog look like below one
actually i do not want to open the file in read only mode because people can open and like to change and save. so guide me what i can do to not to open the file in read only mode.
here is my full code. just have a look and tell me what is wrong in my code or tell me any trick as a result i can open the file not in read only mode. here is my code.
private void button1_Click(object sender, EventArgs e)
object fileName = "";
string filePath = "";
string strSaveasPath = "";
DialogResult result = openFileDialog1.ShowDialog();
if (result == DialogResult.OK)
fileName = openFileDialog1.FileName;
//strSaveasPath = Path.GetDirectoryName(path.ToString());
//fileName = "Z:\\C0000000003.doc";
List<string> _list = new List<string>();
_list.Add("tridip");
_list.Add("arijit");
//object fileName = "D:\\CVArchievePath\\C0000000001.doc";
object textToFind = "test";
object readOnly = false;
Word.Application word = new Word.Application();
Word.Document doc = new Word.Document();
object missing = Type.Missing;
try
doc = word.Documents.Open(ref fileName, ref missing, ref readOnly,
ref missing,
ref missing, ref missing,
ref missing,
ref missing, ref missing,
ref missing,
ref missing, ref missing,
ref missing,
ref missing, ref missing,
ref missing);
doc.Activate();
object matchPhrase = false;
object matchCase = false;
object matchPrefix = false;
object matchSuffix = false;
object matchWholeWord = false;
object matchWildcards = false;
object matchSoundsLike = false;
object matchAllWordForms = false;
object matchByte = false;
object ignoreSpace = false;
object ignorePunct = false;
object highlightedColor = Word.WdColor.wdColorGreen;
object textColor = Word.WdColor.wdColorLightOrange;
object missingp = false;
Word.Range range = doc.Range();
foreach (string line in _list)
textToFind = line;
bool highlighted = range.Find.HitHighlight(ref textToFind,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing,
ref missing);
System.Diagnostics.Process.Start(fileName.ToString());
catch (Exception ex)
Console.WriteLine("Error : " + ex.Message);
//Console.ReadKey(true);
finally
//doc.Close(missing, missing, missing);
if(doc!=null)
System.Runtime.InteropServices.Marshal.ReleaseComObject(doc);
if (word != null)
System.Runtime.InteropServices.Marshal.ReleaseComObject(word);
word = null;
doc = null;
GC.Collect();
GC.WaitForPendingFinalizers();I know it's a very old issue and I reached to this page looking for a solution. Finally, I have found a fix to this problem.
The problem is that we create an instance of Word and do not close it correctly. This makes program believe that the file is already open and hence you're getting the respective message of file being locked by you.
Set the visibility of your application to true and then when you close it both file and instance should close and you will not get the problem again. -
I would like to use Firefox with Sharepoint.
However, I am only able to open a file in "read only" mode whch means I cannot edit the document and save it. I am also not able to "check-out" a document in Sharepoint and edit it at the same time.This may not work for everyone, but I solved this problem by clicking on the file name in sharepoint, not the document icon to the left of the name. This then brought up the various options, including checking out, editing, version history etc. It seems obvious but I have only just realised this!
-
ALV: columns in read-only mode look like editable columns in edit mode
Hi,
My application contains an ALV table which should be toggled between display and edit mode like the rest of the fields.
The evident solution was to use
if_salv_wd_table_settings~set_read_only( abap_true or abap_false)
However, unlike the rest of the fields, when the application changes into display mode and the fields get grey like in any SAP application, the columns in the table which were editable remain white, and those which were not editable and thus grey, get now white, too, instead of the other way round. So it will look to the normal user, as if now all columns would be editable!
Of course, he would realize that they are not when he tries to edit them, but this is irritating.
See following link with screenshots (only active for 3 weeks from now on):
[Link to my webmail space/SDN: .|https://businesswebmail.telekom.at/filestorage/MzYxMTk1OTMx/]
I have looked
through my books ("Einstieg in Web Dynpro for ABAP", "Praxisbuch Webdynpro for ABAP", ...)
through the wiki for Webdynpro for ABAP here in SDN as well as through this forum (by searching with "ALV edit")
through the notes in BC-WD-CMP-ALV
but could not find any solution. Most tables in those PDF articles found here in the WD4A wiki also show white cells although they are probabliy in read-only mode (e.g. the imitation of the SE16N browser article).
The attributes to the LO_CELL_EDITOR for both Inputfields and textview columns contain exactly the same values when toggling between display and edit mode (read-only in table settings), so also no chance to change here anything.
Also changing the cell design is not a solution as there is no design that looks like grey for not editable according to WDUI_TABLE_CELL_DESIGN ([SAP Help - WDUI_TABLE_CELL_DESIGN|http://help.sap.com/saphelp_nw2004s/helpdata/en/56/5e9041d3c72e7be10000000a1550b0/frameset.htm].
I do not know if I have made an error, as this is my 3rd Web Dynpro (after the first 2 of the introduction book), or SAP is really inconsistent in User interface between "normal" fields and ALV table fields.
Can you please help me?
Thanks in advance,
ErlendHi,
In my application aslo, i have 30 columns out of which 10 are input fields. But, i'm showing the table as ABAP_TRUE incase of Non-editable otherwise to abap_false. Now i'm getting everything as in WHITE cells.
Do you want to show it is Grey mode with Non-editable feature. Is that so.
How many columns are there which has Input fields.
Get the column references.
Now, based on the mode of display create the object as Input or Textview field.
For that column -
If mode eq 'D'.
Create an object for Textview(cl_salv_wd_uie_text_view)
else.
Create an Object for Inputfield(cl_salv_wd_uie_input_field)
endif.
The Append row is a standard button or custom one on ALV toolbar.
Do you want to hide the toolbar or just disable these buttons.
If you want to hide the toolbar then refer my wiki -
http://wiki.sdn.sap.com/wiki/display/WDABAP/NullreferenceforUPDATETOOLBARerrorsofALVinthewebdynpro+ABAP
Regards,
Lekha.
Edited by: Lekha on Sep 30, 2009 8:06 PM -
How to display the "display values" in READ Only mode for a SHUTTLE
Hi,
I have a form item of type *'Shuttle'* and using the following LOV.
select DEPTNAME d, DEPTNO r
from DEPTIn normal mode..it displays the department name and internally store the Deptno..
Now I converted this item to Read Only mode using Read Only Condition Type
the problem is as soon as it becomes read only...it displays the deptno....not the department name
Department- 10:20:30How can I display the "display values" i.e the actual department name in read only mode..
Department- Department1:Department2:Department3Thanks,
DeepakHi,
It seems feature. Shuttle is span tag when it is read only.
Work around could be that
you compute display as text item with LOV display value according shuttle session state and show shuttle and this item conditionally depend case
Br, JAri
Maybe you are looking for
-
Verizon Wireless False Advertising on Family of 4 More Everything Plan
I am trying to take advantage of the heavily advertised $160 family plan for 4 lines 10 GB of data. I have 4 lines and have upgraded my data to 10 GB. I need to be enrolled in Edge to get the $25 discount per line to actually get the deal. Three o
-
Firefox 5 and 6 both are crippling auto-player scripts, why?
I use a number of greasemonkey scripts. Once I updated to 5 these scripts, while still working partially, were no longer working completely in "Mafia Wars". I'd say they were less than 50% functional and were essentially useless to me. Upgrading furt
-
Uploading music CD's to itunes
Two issues. The first one is that when I upload some music cd's into my itunes library, itunes wants to place the songs in a compilations folder. Sometimes this occurs even with a 2 or 3 cd set. One CD will be filed under the artists name and the
-
What are the best quality settings in encore for DVD production?
Hello everyone, I'm Paul. I was working on a HD PROJECT 1920 by 1080 30p 50mbps. I export it is using h.264 codec which produce mp4 file in pr pro cs6. When I import it in encore and export to DVD. The quality gets so dull and blurry compare to other
-
Oracle Performace Management link to Payroll
Hi, I wish to get a better understanding of how Oracle Performance management can be linked to Oracle payroll. I am reading the Oracle manual which states the Performance management workflow process can: 'creates or updates the appraisee's learning p