Visual Administrator hangs at 99 per cent

Netweaver 2004s SR2 MS Sql Server Unicode Windows Server 2003 edition installed successfully with usage types As Java and DI. Visual Administrator does nangs at 99 per cent. First time I got ping connection lost. Now it hangs at 99 per cent. SAP MMC all nodes are green. Can connect to the server using the URLs and can run the Java examples.
Visual Admin log says:
P4RuntimeException:java.net.SocketException:No bufferspace available(maximum connections reached?): recv failed.
Increased the number of jdbc connections to 50 and VA is not coming up.
Any help appreciated

Please check Re: visual administrator can connect to SAP j2EE engine Quite a long thread but you might find some useful clue from this. Long back I once faced this error and found some relevant note but could not check as the ServiceMarketPlace seems to be down now.
Regards
Nilay

Similar Messages

  • Visual administrator getting hanged

    HI all,
    I have given the login credentials for visual administrator but it hangs at 99%.I tried to follow the note 957355 but still the problem persists.Can anybody help me plz.

    Hi,
    I am requesting you to check the work arounds first in SDN, before posting the error messages.
    please have a look on the below links.
    Re: Login to Visual Administrator J2EE 6.30 SP 02 hangs on 99 %
    Re: Login to Visual Administrator J2EE 6.30 SP 02 hangs on 99 %
    -Srini

  • Unable to connect visual administrator SP09 99% hangs up

    Hello:
       I have portal SP09, java 1.4.2_12, and when I try to enter to the visual administrator it hangs up in 99%, and in the console it shows a java.lang.nullpointerexception,
    at com.sap.engine.services.adminadapter.gui.clustereview... etc
    Anybody knows how to fix this?
    Thanks
    Mario G

    Hi,
    Add the parameter <b>-DP4ClassLoad=P4Connection</b>  to your Go.bat file.
    This is a fix from SAP. In SP 19 and so the parameter is already added in the Go.bat file. Restar your Portal cluster and check if the VA works.
    Hope this helps.
    Regards,
    Mani.

  • Visual Administrator for XI hangs at 99%

    Hi All,
    My XI server was running fine. I was doing a SOAP to RFC scenario. Suddenly, it didnt respond(Donno the reason). So I restarted the server.
    After I restarted the XI machine, the status in SAP Management console is Green. But when I try to access the XI page, it doesn't come up. But the page "http://<host>:<port>/index.html" comes up. I tried to open up the Visual Administrator. But it stops at 99% while connecting.
    I looked at some of the log files. In the folder, \user\sap\SID\Instance\Work, I looked at std_server0.out file. Here I saw the error below:
    Service monitor started. (23984 ms).
    Mar 26, 2007 2:29:56 PM ...pl.j2ee.sapengine630.ServiceFrameImpl [SAPEngine_System_Thread[impl:5]_100] Fatal: Failed to initialize the CPA cache service. For more details please check the trace for location com.sap.aii.af.service.cpa.
    service com.sap.aii.af.cpa.svc ================= ERROR =================
    Cannot start service com.sap.aii.adapter.jms.svc; it has hard reference to service com.sap.aii.af.cpa.svc which is not started.
    Cannot start service com.sap.aii.adapter.mail.svc; it has hard reference to service com.sap.aii.af.cpa.svc which is not started.
    Cannot start service com.sap.aii.adapter.jdbc.svc; it has hard reference to service com.sap.aii.af.cpa.svc which is not started.
    Service tc.monitoring.logviewer started. (22203 ms).
    Cannot start service com.sap.aii.adapter.bc.svc; it has hard reference to service com.sap.aii.af.cpa.svc which is not started.
    Service com.sap.aii.af.ms.svc started. (20406 ms).
    Cannot start service com.sap.aii.adapter.rfc.svc; it has hard reference to service com.sap.aii.af.cpa.svc which is not started.
    Cannot start service com.sap.aii.adapter.file.svc; it has hard reference to service com.sap.aii.af.cpa.svc which is not started.
    Cannot start service com.sap.aii.af.security.service; it has hard reference to service com.sap.aii.af.cpa.svc which is not started.
    Cannot start service com.sap.aii.adapter.xi.svc; it has hard reference to service com.sap.aii.af.cpa.svc which is not started.
    Cannot start service com.sap.aii.af.ispeak.svc; it has hard reference to service com.sap.aii.af.cpa.svc which is not started.
    Service rfcengine started. (47109 ms).
    Timed out services:
    Service webdynpro.
    From the above error, it seems com.sap.aii.af.cpa.svc didn't start. But as the VIsual Admin is not, I am unable to start this service.
    FYI, the JDK installed on my XI machine is JDK_1.4.2_07.
    Someone please let me know, whats the problem behind this Visual Admin Start up?
    Regards,
    Vijay.

    you can find some information at XI installation problem
    Cheers,
    -Sunil

  • Visual Administrator - Login Problem

    hi all,
    I am having problem starting visual administrator.since i am a new user here, i am provided with the user id/password ( not Administrator UID/PW ) and told that it has necessary authorizations.
    when i try to start the VA by using my UID/PW and given connection paramters with the http port 55000,
    Getting an error- unable to look up a connection "name i gave"
                             unable to lookup connection with the parameters "name i gave : port"
    Lookup connection via message server - ( i chose this option while creating connetion paramters )
    Direct connection to a dispatcher node
    what am i doing wrong ? don't i have necessary permissions or i need to use the administrator and password ?
    And we have two instances ( MD1 & MD2 ) running on the same server..how do i get the diiferent instance in VA by giving the same http port 55000 ?
    I am not able to login..please help.
    Addy

    Nicholls,
    I mentioned it wrongly..The P4 port was 55004 only..but the message server port shows only 3960.
    > The Java message server port is normally 81xx, where xx is the instance number of SCS. I can't guess what that value is, but it is often 1  number higher than the CI number (in your case 50, which means SCS of 51).
    The CI is 50..but why do we calculate 81xx ? And i always check the system info page only for any port information..that shows me only 3960.
    Is it how we need to calculate for message port ( 81xx )...I was not knowing that..!
    Now, I tried with 8151 also as per your guidance..but, no luck..:-(
    Thanks!
    Addy

  • Visual administrator use remotely

    Dear Experts,
    How I can connect visual administrator and config tool through remote pc with using terminal server .Is there any separate utility available ?
    one more question - I want use user administration through UME brower but when I am creating any user it is giving error "user can not create" . As per the ADM 200 I have to add SAP_BC_JSF_COMMUNICATION role to the user SAPJSF through GUI, I have added this role to the user but it is stuck at user comparison , giving error "role is locked by sap* user" .
    pl. help , Is there any other process ? or where i am wrong .
    regards
    sonal.

    Hai,
    You can use Xmanager 3 which will help you in connecting to Visual admin and Config tool.
    You can download the Evaluation version from any site and after 30 days you can use the Xmanager -Passive option life long.
    Process to connect to Visual admin/Config tool from remote PC:
    Start Xmanager you will get 'X' icon in the system tray, then start your session and run the 'go' script from your OS level. Speed will be a bit on the lower side, since you are exporting the DISPLAY from your remote server.
    The role SAP_BC_JSF_COMMUNICATION has been locked by user SAP, ie,. somebody has been working with SAP user and editing or displaying the above said role. Due to this you are not able to compare the role.
    Edit role SAP_BC_JSF_COMMUNICATION in PFCG.
    1. Click authorization tab.
    2. Click Change Authorization Data Button.
    3. Expand all trees.
    4. Asign full authorization at all authorization object.
    After this try to create Users in UME.
    Regards,
    Yoganand.V
    Edited by: Yoganand Vedagiri on Dec 19, 2008 11:33 AM

  • How to import configuration in Visual Administrator

    Hello Experts
    In the Visual Administrator under "Tools" menu there is an "Export" option which exports the VA configuration.
    However - i can't find any "import" option.
    Does anybody have a clue how to import the exported configuration data back to the VA ?
    Regrads
    Adi J.

    as per design, I guess.
    Maybe if import different J2ee configuration can somehow screw up a lot of things..so the feature is not available.
    Just my opinion..
    cheers,
    Vincent

  • Can't Log into J2EE Engine Visual Administrator

    I cannot get logged into our J2EE Engine Visual Administrator on our SAP Portal.  After I enter my userid and password (which I know are valid) I get a progress bar which progresses to approx 50%, then errors out with the message:  'Error while connecting. Cannot open connection on host: <IP-address> and port: <port>'
    I found this document to troubleshoot the problem:
    https://cw.sdn.sap.com/cw/docs/DOC-29070?treeid=DOC-7447
    It says the problem is likely that the P4 port is incorrect or the wrong transport layer is selected in my connection string.  It suggests using the config tool to find the P4 port and has a diagram showing the port in the local properties.  When I go to my config tool, I am missing the Local Properties box.  My screen only shows the Global Properties.  Is there somewhere else to check the port.  I am pretty sure I have the right port because if I try to connect using an incorrect port I get the error message instantly. 
    The transport layer in my connection string is 'default'. 
    Can anyone help?  Thanks.
    Our Visual Administrator version is 6.40 Support Pack 22.  The java version is 1.4.2_13.

    Hi Kathryn,
    P4 port is used for connecting to VA. P4 port will be 5<Inst no>04.
    Please check if you have this port while connecting to VA. You can check this port in the index page of your portal.
    Can you try restarting the portal instance ??
    Also you need not enter userID for logging into VA. By default it uses "administrator" user.
    You may also check if the administrator user is locked.
    Revert if the issue persists.
    Cheers.,
    Raghu

  • ARD Administrator hangs with "Spinning Wheel of Death" after Apple Updates

    Help! I added the required eight Apple Updates today (11/23/09) and Apple Remote Desktop (ARD) Administrator stopped working. The installed updates are iTunes, 9.0.3, Remote Desktop Client Update 3.3.1, Java for Mac OS X 10.5 Update 5 1.0, Security Update 2009-006 1.0, Bluetooth Firmware Update 2.0.1, Safari 4.0.4, Performance Update 1.0, and iMovie Update 8.0.5.
    Since these updates, the ARD Administrator hangs up (spinning wheel) when trying to activate it. I receive the error message:
    The Remote Desktop Administrator software failed to start due to an unexpected error. The Remote Desktop software may not be installed correctly, or the computer may require a restart. [Quit]
    I have tried restarts, poweroffs, etc., but the ARD Administrator stills hangs. What can I do to reverse the last ARD update?

    Without java, Safari is just as fast as Firefox. And if you do for some reason need java, you can use Firefox instead (as I had to, to log into the Apple Discussions" page.
    Safari is faster than Firefox. There are very few sites that need use Java, so unless you know a site uses it, it should always be disabled. And for clarification, no part of the Apple web site uses Java, so there's no reason to have it activated.

  • Error in Starting Visual Administration - SSO Configuration

    We have installed EP 7 SP 14 on Enterprise Linux 5.0
    Initially, i.e. after installation, only the following login module stack was used under sap j2ee engine
    BasicPasswordLoginModule - SUFFICIENT
    To check the SSO with other nw 7 java system in our landscape, I have changed it to the following using Visual Administration
    EvaluateTicketLoginModule - SUFFICIENT
    BasicPasswordLoginModule - OPTIONAL
    CreateTicketLoginModule - REQUISITE
    I have restarted ep
    Now, I am able to login to the system using Administrator login from the browser. 
    I checked the SSO.  It was not working.
    I tried to log in to Visual Administrator to make changes, its giving me the following error
    Error while connecting
    com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied.
    How do I proceed ?
    Rgds,
    Santosh

    Given below is the output from the log file security.0.log available at
    /usr/sap/DEP/JC00/j2ee/cluster/server0/log/system
    #1.#00505696557D00650000002A0000779100045465B00B0CB5#1218695628786
    #/System/Security/Authentication
    #sap.com/irj
    #com.sap.engine.services.security.authentication.logincontext
    #P00101959#920##n/a##f3ef9d2069ca11ddcff800505696557d
    #SAPEngine_Application_Thread[impl:3]_37##0#0#Info#1
    #com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
    User: P00101959
    Authentication Stack: ticket
    Login Module                                                               Flag        Initialize  Login      Commit     Abort      Details
    1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT  ok          false      false
    2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          true       true
    3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok          true       true
    Central Checks                                                                                true                  #
    #1.#00505696557D00650000002B0000779100045465B00B1048#1218695628787
    #/System/Security/Audit#sap.com/irj
    #com.sap.security.core.util.SecurityAudit
    #P00101959#920##n/a##f3ef9d2069ca11ddcff800505696557d#SAPEngine_Application_Thread[impl:3]_37##0#0#Info#1
    #com.sap.security.core.util.SecurityAudit#Plain###P00101959    
    | LOGIN.OK     
    | USER.CORP_LDAP.p00101959    
    |     
    | IP Address=[172.18.40.68]#
    Rgds,
    Santosh

  • TS3297 I have only a problem downloading the music porchased o. itunes on my min ipad? The file reach about 90 per cent and rhen it says error ..try later...what i have to do to solve it? Thank you in advance.

    Hi
    I have a problem when trying to download music or videos purchased on Itunes on my mini Ipad.
    When reaching about ninty per cent of download it says error end try later.
    What can I do to solve this?
    App store and book store work fine and I have no problem with them.
    Thank you for your help!
    My i Os is updated to the last version.

    Hello Theresa818,
    Thank you for using Apple Support Communities!
    It sounds like the cellular data will not activate for some reason on the iPad.
    I found this article that will help you resolve this issue here, named iPad (Wi-Fi + Cellular Models): Troubleshooting a cellular data connection, found here http://support.apple.com/kb/TS4249
    Check for a carrier settings update.
    Update your iPad.
    Toggle the Cellular Data setting off and on under Settings > Cellular Data.
    Restart your iPad.
    Tap Settings > General > About. Locate the Carrier entry and make sure that your carrier is correct.
    If your SIM card has SIM PIN enabled, try turning it off: Tap Settings > Cellular Data > SIM PIN.
    Make sure you're in an area of good coverage. If the cellular data connection works in another area, contact your carrier to report the original affected area.
    Reset network settings: Tap Settings > General > Reset > Reset Network Settings.
    Restore the iPad as new.
    If none of the above steps resolves the issue, make an appointment at an Apple Retail Store, contact your carrier, or contact AppleCare to troubleshoot further.
    I know you may have done one or two of the steps here, so you can skip those.
    Take care,
    Sterling

  • ERROR in Document Services Configuration through visual administrator

    Hi Experts,
                   I am using NETWEAVER 7.0 , I am getting error when i am trying to do 'Document Services Configuration' and 'Document Services License Service' through visual administrator message is
    "[permissions_collection_operator]: [permission_collection]:  domain's permissions: [
      standalone: [, ]
      collections:
    {(java.lang.RuntimePermission loadLibrary)(java.lang.RuntimePermission queuePrintJob)(java.lang.RuntimePermission stopThread)}
    {(java.net.SocketPermission localhost:1024- listen,resolve)(java.net.SocketPermission * connect,resolve)}
    {(java.util.PropertyPermission java.version read)(java.util.PropertyPermission java.vm.name read)(java.util.PropertyPermission java.vm.vendor read)(java.util.PropertyPermission os.name read)(java.util.PropertyPermission java.vendor.url read)(java.util.PropertyPermission java.vm.specification.vendor read)(java.util.PropertyPermission java.specification.vendor read)(java.util.PropertyPermission os.version read)(java.util.PropertyPermission java.specification.name read)(java.util.PropertyPermission java.class.version read)(java.util.PropertyPermission file.separator read)(java.util.PropertyPermission os.arch read)(java.util.PropertyPermission java.vm.version read)(java.util.PropertyPermission java.vm.specification.name read)(java.util.PropertyPermission java.specification.version read)(java.util.PropertyPermission java.vendor read)(java.util.PropertyPermission java.vm.specification.version read)(java.util.PropertyPermission * read)(java.util.PropertyPermission path.separator read)(java.util.PropertyPermission line.separator read)}
    {(java.io.FilePermission * read,write)}
    And error when double click on  ''Document Services License Service' message is -
    "Error while loading service Document Services License Service
    java.lang.ClassNotFoundException: com.adobe.service.sap.licensing.AdminUI"
    Thanks & Regards
    Anirudh Saini

    You have the ads_agent pw set incorrectly on the java side. -- I think

  • Ping time out, server connection is lost in visual administrator after java

    Dear all,
    Recently I have done system copy for XI system. I have imported the java import after importing  the abap stack into the target system as java add in abap.The import phase finished successfully and java engine is also working well.
    I have confirmed this by moving to the browser page  " http://hostname:50000/ and XI system  http://hostname:50000/rep ". Everything is working fine and in MMC console as well.
    But while trying to log in to visual administrator i am getting the error message as " ping time out,connection to server is lost "
    std_serverout.log
    unrecoverable stack overflow has occurred.
    An unexpected error has been detected by HotSpot Virtual Machine:
    EXCEPTION_STACK_OVERFLOW (0xc00000fd) at pc=0x00000000080e3c66, pid=2940, tid=928
    Java VM: Java HotSpot(TM) 64-Bit Server VM (1.4.2_16-b05 mixed mode)
    Problematic frame:
    V  [jvm.dll+0xe3c66]
    An error report file with more information is saved as hs_err_pid2940.log
    stdout/stderr redirect
    node name   : server0
    pid         : 3060
    system name : XIT
    system nr.  : 03
    started at  : Tue Feb 17 18:42:50 2009
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    SAP J2EE Engine Version 6.40   PatchLevel 100627.313 is starting...
    Loading: LogManager ... 453 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 94 ms.
    Loading: ThreadManager ... 31 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 219 ms.
    Loading: LockingManager ... 93 ms.
    Loading: ConfigurationManager ... 1502 ms.
    Loading: LicensingManager ... 31 ms.
    Loading: ServiceManager ...
    6.226: [GC 6.226: [ParNew: 87040K->8544K(130560K), 0.0628724 secs] 87040K->8544K(1005056K), 0.0629982 secs]
    Loading services.:
      Service memory started. (16 ms).
      Service cross started. (15 ms).
      Service file started. (78 ms).
      Service timeout started. (32 ms).
      Service runtimeinfo started. (15 ms).
      Service userstore started. (63 ms).
      Service trex.service started. (94 ms).
      Service jmx_notification started. (63 ms).
      Service p4 started. (235 ms).
      Service classpath_resolver started. (15 ms).
    10.537: [GC 10.537: [ParNew: 95584K->16246K(130560K), 0.0776272 secs] 95584K->16246K(1005056K), 0.0777727 secs]
      Service deploy started. (3926 ms).
      Service log_configurator started. (4363 ms).
      Service locking started. (0 ms).
      Service http started. (172 ms).
      Service naming started. (203 ms).
      Service failover started. (78 ms).
      Service appclient started. (110 ms).
      Service javamail started. (140 ms).
      Service jmsconnector started. (140 ms).
      Service ts started. (125 ms).
      Service licensing started. (16 ms).
      Service connector started. (188 ms).
      Service configuration started. (31 ms).
      service MobileSetupGeneration ================= ERROR =================
      Service MobileArchiveContainer started. (78 ms).
      Service webservices started. (470 ms).
      Service dbpool started. (1172 ms).
    13.195: [GC 13.196: [ParNew: 103286K->20423K(130560K), 0.0478316 secs] 103286K->20423K(1005056K), 0.0489244 secs]
      Service com.sap.security.core.ume.service started. (2596 ms).
      Service security started. (2471 ms).
      Service classload started. (78 ms).
      Service applocking started. (141 ms).
      Service shell started. (188 ms).
      Service tceCATTPingservice started. (32 ms).
      Service telnet started. (63 ms).
    18.218: [GC 18.218: [ParNew: 107463K->25937K(130560K), 0.0545612 secs] 107463K->25937K(1005056K), 0.0546428 secs]
      Service webdynpro started. (203 ms).
      Service ejb started. (532 ms).
      Service dsr started. (172 ms).
      Service keystore started. (485 ms).
      Service ssl started. (16 ms).
      Service servlet_jsp started. (704 ms).
      Service tcsecsecurestorage~service started. (63 ms).
      Service jmx started. (391 ms).
      Service tclmctcculculservice_sda started. (0 ms).
      Service rfcengine started. (656 ms).
      Service tcsecwssec~service started. (469 ms).
      Service apptracing started. (360 ms).
    19.355: [GC 19.355: [ParNew: 112977K->42681K(130560K), 0.0844669 secs] 112977K->47563K(1005056K), 0.0845476 secs]
      Service tcsecdestinations~service started. (907 ms).
      Service basicadmin started. (860 ms).
      Service adminadapter started. (297 ms).
      Service pmi started. (312 ms).
      Service tclmctcculservice_sda started. (1251 ms).
      Service tcsecvsi~service started. (438 ms).
      Service monitor started. (407 ms).
      Service sld started. (1721 ms).
    20.296: [GC 20.296: [ParNew: 129721K->39952K(130560K), 0.1028212 secs] 134603K->50894K(1005056K), 0.1028881 secs]
      Service tc.monitoring.logviewer started. (1704 ms).
    21.584: [GC 21.584: [ParNew: 126992K->40823K(130560K), 0.0664458 secs] 137934K->58110K(1005056K), 0.0665026 secs]
      Service jms_provider started. (3518 ms).
      Service com.sap.aii.af.cpa.svc started. (2033 ms).
      Service com.sap.aii.af.security.service started. (16 ms).
      Service com.sap.aii.af.svc started. (157 ms).
    22.873: [GC 22.873: [ParNew: 127863K->43238K(130560K), 0.0574693 secs] 145150K->65266K(1005056K), 0.0575210 secs]
      Service com.sap.aii.af.ms.svc started. (407 ms).
      Service com.sap.aii.adapter.marketplace.svc started. (47 ms).
      Service com.sap.aii.adapter.bc.svc started. (47 ms).
      Service com.sap.aii.adapter.xi.svc started. (47 ms).
      Service com.sap.aii.adapter.jms.svc started. (79 ms).
      Service com.sap.aii.adapter.mail.svc started. (63 ms).
      Service com.sap.aii.adapter.jdbc.svc started. (156 ms).
      Service com.sap.aii.adapter.rfc.svc started. (219 ms).
      Service com.sap.aii.af.ispeak.svc started. (313 ms).
      Service com.sap.aii.adapter.file.svc started. (2315 ms).
    ServiceManager started for 22082 ms.
    Framework started for 24772 ms.
    SAP J2EE Engine Version 6.40   PatchLevel 100627.313 is running!
    PatchLevel 100627.313 December 14, 2005 20:06 GMT
    >26.086: [GC 26.086: [ParNew: 130278K->23111K(130560K), 0.0693509 secs] 152306K->68371K(1005056K), 0.0694372 secs]
    32.059: [GC 32.059: [ParNew: 110151K->34716K(130560K), 0.0419854 secs] 155411K->79975K(1005056K), 0.0420301 secs]
    32.608: [GC 32.608: [ParNew: 121756K->43497K(130560K), 0.0827214 secs] 167015K->105659K(1005056K), 0.0827638 secs]
    38.688: [GC 38.688: [ParNew: 130537K->39986K(130560K), 0.0525517 secs] 192699K->106409K(1005056K), 0.0526114 secs]
    41.615: [GC 41.615: [ParNew: 127026K->32598K(130560K), 0.0467433 secs] 193449K->103188K(1005056K), 0.0467930 secs]
    44.298: [GC 44.298: [ParNew: 119638K->34820K(130560K), 0.0430069 secs] 190228K->105410K(1005056K), 0.0432422 secs]
    46.443: [GC 46.443: [ParNew: 121860K->39729K(130560K), 0.0498349 secs] 192450K->110319K(1005056K), 0.0499023 secs]
    48.656: [GC 48.656: [ParNew: 126769K->36669K(130560K), 0.0625983 secs] 197359K->112667K(1005056K), 0.0626567 secs]
    52.243: [GC 52.243: [ParNew: 123709K->39589K(130560K), 0.0477260 secs] 199707K->115587K(1005056K), 0.0477793 secs]
    115.241: [GC 115.241: [ParNew: 126629K->37429K(130560K), 0.0553704 secs] 202627K->118544K(1005056K), 0.0554346 secs]
    118.096: [GC 118.096: [ParNew: 124469K->40865K(130560K), 0.0504829 secs] 205584K->121980K(1005056K), 0.0505322 secs]
    120.589: [GC 120.589: [ParNew: 127905K->37247K(130560K), 0.0578313 secs] 209020K->123954K(1005056K), 0.0578734 secs]
    122.573: [GC 122.573: [ParNew: 124287K->39626K(130560K), 0.0534208 secs] 210994K->126333K(1005056K), 0.0534640 secs]
    124.070: [GC 124.077: [ParNew: 126666K->35377K(130560K), 0.0626490 secs] 213373K->128235K(1005056K), 0.0627628 secs]
    126.103: [GC 126.103: [ParNew: 122417K->37886K(130560K), 0.0485833 secs] 215275K->130744K(1005056K), 0.0486433 secs]
    128.251: [GC 128.251: [ParNew: 124926K->41258K(130560K), 0.0482213 secs] 217784K->134115K(1005056K), 0.0482675 secs]
    130.792: [GC 130.792: [ParNew:
    Due to this i am not able to log in visual adminsitrator.Kindly advice me for the same.
    Thanks in advance
    Vijay

    Hello vamshi,
    As you have suggeseted, I followed the notes and changed the following paramters.The system is 64bit and hence the values are adjusted according to the server.
    -Djco.jarm=1
    -Dsun.io.useCanonCaches=false
    -Djava.awt.headless=true
    -XX:SoftRefLRUPolicyMSPerMB=1
    -verbose:gc
    -XX:+PrintGCDetails
    -XX:+PrintGCTimeStamps
    -Xss2m
    -Xms2048M
    -Xmx2048M
    -XX:MaxNewSize=320M
    -XX:NewSize=320M
    -XX:MaxPermSize=512M
    -XX:PermSize=512M
    -XX:SurvivorRatio=2
    -XX:TargetSurvivorRatio=90
    -XX:+UseParNewGC
    -XX:+UseTLAB
    -XX:+HeapDumpOnCtrlBreak
    The heap size for java is 2048
    But still i am getting the ping time out. Connection to server is lost.
    Kindly let me know,
    Regards
    Vijay

  • What is the default port on visual administrator with 2004s

    Hi
    I just finished the install of Netweaver 2004s and oracle is up and running and the j2ee engine as well.
    I want to lauch the visual administrator but unable to connect
    its saying cannont connect to ip and port....
    What is the default port for the first time login
    Also,
    went threw my web browser was able to access the portal page of the Netweaver... I tried the sap* user name but doesn't work
    JF

    Hi Jean
    The default port for VA is 5XX04 (where XX is the instance number)
    the user for the portal is Administrator (not sap*) and the password is the one you used on the installation.
    Hope this help
    Juan
    Please reward with points if helpful

  • Error when connecting to Visual Administrator

    Hi Experts,
         Im getting this error when trying to connect to visual administrator...
    Im basis, and already ask to the IT team to open the port 50004 so the Visual administrator can connect. Their answer was that the port is open waiting for a tool to ask to connect to it. I´ve been looking for info in regards this issue unsuccessfully, can't find anything. Any ideas????
    Thanks in advance...

    Hi,
    Administrator user may be locked you can unlock and then try to connect Visual Administrator and please read below link
    Visual Administrator: Logon Failure (SAP Library - SAP NetWeaver? Problem Analysis Guide (PAG))
    Thanks
    Brahma.

Maybe you are looking for