Visual Administrator limited access
Hi !
We want to be able to give our developers read only
access to J2EE Visual Admin of WebAS 6.40 to monitor
logs and look at configuration in our development system.
Is there standard soltuion for this ? We are using
ABAP UME for J2EE.
Thank you,
Forest.
Hi Forest,
As far I know there is no such provision till date SAP have given.
Well to exactly answer your question, Visual Admin as you know the online administration tool is meant for effectively administered by none other than administrator who installs the WebAS.If many users logs in Visual Admin even though they are not the adminstrator this will surely affects the performance of VA.If your concern is to monitor the log of the development system well then the administrator can monitor it and can share it with the team in many ways a typical example through collaboration by creating a room or even simply by emailing the group at regular intervals.
Hope it helps.
Regards,
Guru
Similar Messages
-
Visual Administrator - define custom properties
Hi,
Is it possible to define custom properties in Visual Administrator & to access these properties from an EJB?
Thanks,
JeroenHi
I think you can do it using Configuration Adapter service of visual administrator -
J2EE_Admin cannot access Visual Administrator
I hope all you gurus are doing well.
OK, so here is the issue, I am trying to configure Adobe Froms on one of our SAP systems. Part of the installation requiers me to access Visual Admin. I am able to access VA using the emergency user but I cannot make any changes to the settings. I am NOT able to access the VA using J2EE_ADMIN or any other user. I keep on getting the following error:
Caller Visual_Admin not authorized, only role administrators is allowed to access JMX
When I initially encountered the error I accessed VA using SAP* and there was no Administrators group. So I created the group but I am not sure if that made any difference. I've checked the roles in SAP and J2EE_ADMIN has the SAP_J2EE_ADMIN role assigned to it.
I have also created other users and assigned the SAP_J2EE_ADMIN role to them but it still is not working.
Other than that is there anything that needs to be done within VA to add certain privilages to a Group?
How do I create the Administrators group?
Is SAP* limited to what it can do in VA?Hi Glen
This forum is for Java EE 5 - which means that it's focused on NetWeaver 7.1 and up. These versions do not have Visual Administrator anymore. I think the default administrator is also now called "Administrator" (not "J2EE_Admin" anymore) - but I could be wrong on this last point.
Please could you clarify which version of NW you're using?
Thanks
Stuart -
How to remotely access visual administrator in AIX system
Hi Friends
i want to remotely access visual administrator of my client system which is on AIX platform,can any one please tell me the step by step procedure of connecting to that system and then which command to use to start Visual administrator.
Like the way we do in windows remote desktop and run the go.bat file in the admin folder of the j2ee,similarly wat should i do to start this go.bat in this AIX system.
Any help would be appreciated and rewarded with points
Thanks and Regards
RashmiJust found the apex_access_control table in my schema.
Guess I'll just use that. -
Visual administrator access problem
I'm trying to access the Visual Admin. I created an user with the SAP_J2EE_role, I'm able to access the sap GUI but not the Visual administrator.
ERror is: User authentication failed.
Thanks all,
VitoTry this steps
C:\usr\sap\J2E\JC01\j2ee\configtool->configtool.bat->open it
1. Click on Secure store
2. Right you will find :
admin/password/J2E->retype your admin passowrd which you gave during installation=>SAVE properly
Restart the server and try login visual admin
Regards
Suresh -
Cannot access key storage in Visual Administrator
Hi,
I cannot access the key storage node (==> Host ==> Server ==> Services ==> Key Storage) in Visual Administrator.
Everytime I click on the key storage node an error message pops up. It says:
<b>IAIK security library not found
java.lang.NoClassDefFoundError:iaik/security/provider/IAIK</b>
According to SAP (http://help.sap.com/saphelp_nw04/helpdata/en/e9/a1dd44d2c83c43afb5ec8a4292f3e0/content.htm) the SAP Cryptographic Toolkit has to be installed to use the Key Storage functionality of the Visual Administrator. The SAP Cryptographic toolkit has been deployed.
Does anyone know where I can get that library and where I am supposed to put it? We work with <b>SAP NetWeaver '04 WebAS Java 6.40 SP14</b>.
I appreciate any kind of help.
Regards,
MartinHi,
The missing class should be in the iaik_jce.jar
archive. This archive is present in folder \usr\sap\<SID>
\sys\global\security\lib\tools(or)engine.
Copying this archive to the visual admin's <j2ee-install>
\admin\lib folder, this workaround can solve your issue.
You may also need unlimited strength jurisdiction
policy depending on your JDK version. For more info:
http://help.sap.com/saphelp_nw04/helpdata/en/e9/a1dd44d2c83c43afb5ec8a4292f3e0/content.htm ->
Deploying SAP Java Cryptographic Toolkit.
Also check SAP Note: 891666
Hope it helps..
Regards
Srikishan -
Access visual administrator from the desktop
Hi,
Can anyone tell me if it is possible to access the visual administrator of the XI server from a PC in the network by downloading the go.bat file from the marketplace?
Thanks.Hi,
You need Xterm/X-windows to access Visual Admin of your remote server with in the network.
I think we can access the PI server,by just download the go.bat file from service market place..
cheers
deepu -
Error in logging using "Default" account to access visual administrator
Dear experts,
i had encountered the following error message when i tried to login to Visual Administrator using go.bat using default.
Unable to look up connection Default
http://L31021:8108/msgserver/text/logon returned empty list of connection parameters
and when i tried using another account and direct connect to a dispatcher node, they say error while connecting.
please give me advice on how to solve the problem.
thank you for the attention given and time.
with thanks,
kejunHello Tan,
The error from the first type of connection indicates that the message server list of registered nodes was empty. The list is empty when the server and the dispatcher nodes are not running or using different message server.
First check in the dev_server0 and dev_dispatcher files in the work directory that they are connection to the same message server. Then in std_server0.out and std_dispatcher.out try to find why the server and the dispatcher nodes didnu2019t register in the message server. Also check the default trace files of both nodes.
Regards,
Ventsi Tsachev
Technology Development Support (J2EE Engine)
SAP Labs, Palo Alto, Ca (USA) -
Visual Administrator access error!
Hi,
I am not sure wether this is the correct forum. I was trying to login my Visual Administrator of my XI development server using the Xmanager software.
I am getting an error like :
Calling the BSP page was terminated due to an error.
Exception Class CX_FQDN
Error Name
Program CX_FQDN=======================CP
Include CX_FQDN=======================CM002
ABAP Class CX_FQDN
Method CHECK
Line 10
Long text -
Error type: Exception
Your SAP Business Server Pages Team.
Experts,
I need your comments !
Regards,
Arnab .Hi...
Refer this link to get an idea.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/54c79490-0201-0010-3db9-f46c112569e8
Regards,
Leela -
Error in Starting Visual Administration - SSO Configuration
We have installed EP 7 SP 14 on Enterprise Linux 5.0
Initially, i.e. after installation, only the following login module stack was used under sap j2ee engine
BasicPasswordLoginModule - SUFFICIENT
To check the SSO with other nw 7 java system in our landscape, I have changed it to the following using Visual Administration
EvaluateTicketLoginModule - SUFFICIENT
BasicPasswordLoginModule - OPTIONAL
CreateTicketLoginModule - REQUISITE
I have restarted ep
Now, I am able to login to the system using Administrator login from the browser.
I checked the SSO. It was not working.
I tried to log in to Visual Administrator to make changes, its giving me the following error
Error while connecting
com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied.
How do I proceed ?
Rgds,
SantoshGiven below is the output from the log file security.0.log available at
/usr/sap/DEP/JC00/j2ee/cluster/server0/log/system
#1.#00505696557D00650000002A0000779100045465B00B0CB5#1218695628786
#/System/Security/Authentication
#sap.com/irj
#com.sap.engine.services.security.authentication.logincontext
#P00101959#920##n/a##f3ef9d2069ca11ddcff800505696557d
#SAPEngine_Application_Thread[impl:3]_37##0#0#Info#1
#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
User: P00101959
Authentication Stack: ticket
Login Module Flag Initialize Login Commit Abort Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule SUFFICIENT ok false false
2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule REQUISITE ok true true
3. com.sap.security.core.server.jaas.CreateTicketLoginModule OPTIONAL ok true true
Central Checks true #
#1.#00505696557D00650000002B0000779100045465B00B1048#1218695628787
#/System/Security/Audit#sap.com/irj
#com.sap.security.core.util.SecurityAudit
#P00101959#920##n/a##f3ef9d2069ca11ddcff800505696557d#SAPEngine_Application_Thread[impl:3]_37##0#0#Info#1
#com.sap.security.core.util.SecurityAudit#Plain###P00101959
| LOGIN.OK
| USER.CORP_LDAP.p00101959
|
| IP Address=[172.18.40.68]#
Rgds,
Santosh -
What is the default port on visual administrator with 2004s
Hi
I just finished the install of Netweaver 2004s and oracle is up and running and the j2ee engine as well.
I want to lauch the visual administrator but unable to connect
its saying cannont connect to ip and port....
What is the default port for the first time login
Also,
went threw my web browser was able to access the portal page of the Netweaver... I tried the sap* user name but doesn't work
JFHi Jean
The default port for VA is 5XX04 (where XX is the instance number)
the user for the portal is Administrator (not sap*) and the password is the one you used on the installation.
Hope this help
Juan
Please reward with points if helpful -
Error in security provider logon stack: no logon to visual administrator
Probably i made a mistake in configuring SAP-J2EE-Engine security provider login modules.
Now i cannot logon to Visual Administrator, it tells me
"Error while connecting
com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied."
Is there a way to reset login module stack from configtool or in some config file?
Many thanks in advance.
Simone ZaffalonHi
you can configure your login stack configuration using config tool. Config tool works locally against the server's database, thus no authentication is required.
1. Be sure that your server is not running! (shutdown SAP J2EE processes)
2. Launch config tool ("use default db settings").
3. switch to configuration editor mode (the most-right icon in the icon toolbar)
4. navigate to security-->configurations
Here you find your logon stacks and the login modules contained within them. Click on the "pencil" icon for changing your current configuration.
See the thread below .It will resolve your issue
Unable to access Visual Admin
Points are welcome if it is helpful
Koti Reddy -
Regarding J2EE Visual Administrator
Hi,
I am new to the World of Web Dynpro in Java. I have developed a small Web Dynpro Application to access ABAP R/3 Backend. I have to check connection parameters for the used SLD, which are defined in the J2EE Visual Administrator.. Kindly tell me where is the J2EE Visual Administrator located.. How to check those parameters?
Thank You.
Regards,
DhanaOpen the Visual Administrator by double-clicking the file go.bat in the local file directory of the Java engine of the SAP Web Application Server:
\usr\sap\<System ID>\<System Number>\j2ee\admin
The follow <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/15/b4ba8f207a40ab8d28165cf3b04de4/frameset.htm">Setting Up the SLD Data Supplier for J2EE-Based Systems</a>
Bala -
How to user Create ID/Passrod in Visual Administrator
Hi All
I don't want to share J2EE admin ID/Password. How can i create a user and assign access to Visual administrator.
ThanksHi,
Please login to Visual Admin using an user id and pwd which has administration authorisation of J2ee engine with the P4 port and go to security provider under cluster configuration and you would find a tab on the right hand side for user management under which you would find an option for creation of users and groups.
Hope this helps. pls reward points if useful.
Regards
Sree -
Visual Administrator canu00B4t be connected
Hi,
i´ve installed a sandbox CRM 4.0 on Win2003.
Now i installed the web applications, connected the IPC to the R/3.
Yesterday i tried to start the visual administrator but the errormessage
"unable to lookup connection default."
"http://:8101/msgserver/text/logon returned emtpy list of connection parameters".
where can i set these connection parameters?
2. problem:
i can´t connect to the J2EE-URL:
http://localhost:50000/
returns the error "Dispatcher running, but no server connected!"
Who can help?
Thanx in advance!It seems that the server is not registered to Dispatcher. Please check it by accessing http://localhost:50000 again. If you get the message Dispatcher running but no server connected, there is some problem in the installation.
Regards,
Vivek
Maybe you are looking for
-
How do I display on-the-fly generated XML on a web page using DW CS4 Spry regions?
On a main web page I'm trying to display formatted data from an ASP page that generates XML on-the-fly from a query. When I run the ASP page from the browser, the XML formatting of the data works. But when I run the main web page, the data doesn't di
-
I just downloaded iCloud on my MacBook Pro and iPhone. How do I download it to my MacBook Air from either of these devices?
-
30 GB video iPod memory question
Ok, I just got the 30 GB video iPod a few days ago. Before I bought it when I was looking at the specifications on the apple store, it said that it could hold 75 hours of video. I would like to know if this could possibly be correct, because when I l
-
ERS indicator of PO item is not checked for Contract assigned SRM POs.
Hi Team We have SRM PO which is assigned to contract as source of supply and vendor for the contract document is assigned with ERS functionality (Aut. setlement in vendor master) for Invoice settlement. Issue faced: When the contract is selected as s
-
For the "jdbc:odbc:<driver> ... what is the correct specification for <driver> when trying to connect to a MS Access 2007 database? WORKING example, please! the more detail, the better ... thanks!