Visual Administrator logs

Dear Experts
I am working in SAP XI and need to see some error logs. I know we can access it using SXMB_MONI, but I need to see it in Visual Administrator.
Can you please tell me where to find Visual Administrator?
Do I need an admin right to access it?
Points will be rewarded to satisfactory answers.

Hi,
Refer
http://help.sap.com/saphelp_nw04/helpdata/en/68/f4bc3deaf28d33e10000000a11405a/frameset.htm
Its built with SAP J2EE Web Application Server.
Its basically used to administrate the SAP J2EE WAS(Administration tool).
we can adimistrate SAP J2EE WAS in different ways.
this is one of the GUI tool used to administrate.
J2EE Engine Visual Administrator is a graphical user interface (GUI) that enables administration of the whole cluster, all cluster elements, and all modules running on them. It provides remote monitoring and management of managers, services, libraries, and interfaces working on each element in a single GUI.
this is described in detail in this link.
http://help.sap.com/saphelp_nw04/helpdata/en/39/83682615cd4f8197d0612529f2165f/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/23/fa1f1e5f6841cf92c64dc19d79f290/content.htm
USMM Equivalent thru Visual Administrator
Thanks
Swarup

Similar Messages

Can't Log into J2EE Engine Visual Administrator

I cannot get logged into our J2EE Engine Visual Administrator on our SAP Portal. After I enter my userid and password (which I know are valid) I get a progress bar which progresses to approx 50%, then errors out with the message: 'Error while connecting. Cannot open connection on host: <IP-address> and port: <port>'
I found this document to troubleshoot the problem:
https://cw.sdn.sap.com/cw/docs/DOC-29070?treeid=DOC-7447
It says the problem is likely that the P4 port is incorrect or the wrong transport layer is selected in my connection string. It suggests using the config tool to find the P4 port and has a diagram showing the port in the local properties. When I go to my config tool, I am missing the Local Properties box. My screen only shows the Global Properties. Is there somewhere else to check the port. I am pretty sure I have the right port because if I try to connect using an incorrect port I get the error message instantly.
The transport layer in my connection string is 'default'.
Can anyone help? Thanks.
Our Visual Administrator version is 6.40 Support Pack 22. The java version is 1.4.2_13.

Hi Kathryn,
P4 port is used for connecting to VA. P4 port will be 5<Inst no>04.
Please check if you have this port while connecting to VA. You can check this port in the index page of your portal.
Can you try restarting the portal instance ??
Also you need not enter userID for logging into VA. By default it uses "administrator" user.
You may also check if the administrator user is locked.
Revert if the issue persists.
Cheers.,
Raghu

Session Expired after logging on to Visual Administrator - SLD Config

Hey Guys,
I have a NW2004s installation, both ABAP and Java stack, with UME pointing to the ABAP stack.
I created a user in ABAP stack, and assigned the J2EE_ADMIN role to this user.
I try to log into the Visual Administrator with this user. The login is successful.
However right after I navigate to the sld data supplier node and click it, I get the error message, Session Expired.
I think it is because I am not authorized to configure SLD or something like that.
When I created the user in the ABAP stack I entered all the roles for the user with which I am logging on to the Visual Admin:
SAP_SLD_ADMINISTRATOR
SAP_SLD_CONFIGURATOR
Anyhelp so that I can get over this problem and configure the SLD in the system.
Thank You.
Sumit.

J2EE_ADMIN role has all the rights(configure SLD etc) , make sure you configure the SLD and import the CIM model content you can login to SLD at http://<host>:5XX00/SLD and then access the data supplier bridge
where XX is your instance number

Using certificates to log into Visual Administrator?

We have been asked to use certificates / SSL to log into the Visual Administrator as opposed to entering our usernames and passwords. Is this possible with the Visual Administrator and if so, are there any configuration guides, setup instructions or pointers to how to accomplish this? Has anyone else dones this type of configuration?
Any help would be gratly appreciated.
Thank-you,
Deb Nugent.

I am closing this question. Through another thread (SSO to the Visual Administrator itself) and additional information, I have been told that this is not possible within the Visual Administrator.
While this is not the response I had hoped for, I am considering this question answered.

Configure logs Visual Administrator

Hello all,
I have a problem related to the size of log files in XI environment.
I access to transaction al11 in XI environment. Then, I access to the folder /usr/sap/XIP/xxx/j2ee/cluster/server0 and I see that there are a lot of jrfc*.trc files of 0,5 GB of size.
I would like to know where can I define those files and how to manage them in order to optimize space in servers.
Thanks in advance.
Best regards,
Gemma

Can you please have a look, which errors are logged in the trace files. If possible, then fix the errors, this will reduce the amount of lines generated. It is possible that somebody activated a rfc trace, this can be done, where the rfc destination is specified. For example SM59, or visual admin -> server0 -> services -> destinations.
To configure the logging of the files in server0/log have a look at this thread: Re: Log file size in SAP Netweaver
Visual Administrator Tool -> Server -> KERNEL -> LogManager:
DefaultTraceFile_Count -> is the number of files
DefaultTraceFile_Limit -> is the size of the files in bytes
Be aware, that usually the log files are not overwritten. They are archived in ..log/archive. To turn this off you can do this here:
Visual Administrator Tool -> Server -> SERVICES-> Log Configurator -> Tab Properties
Regards, Michael
Edit: oh, too slow

Error in logging using "Default" account to access visual administrator

Dear experts,
i had encountered the following error message when i tried to login to Visual Administrator using go.bat using default.
Unable to look up connection Default
http://L31021:8108/msgserver/text/logon returned empty list of connection parameters
and when i tried using another account and direct connect to a dispatcher node, they say error while connecting.
please give me advice on how to solve the problem.
thank you for the attention given and time.
with thanks,
kejun

Hello Tan,
The error from the first type of connection indicates that the message server list of registered nodes was empty. The list is empty when the server and the dispatcher nodes are not running or using different message server.
First check in the dev_server0 and dev_dispatcher files in the work directory that they are connection to the same message server. Then in std_server0.out and std_dispatcher.out try to find why the server and the dispatcher nodes didnu2019t register in the message server. Also check the default trace files of both nodes.
Regards,
Ventsi Tsachev
Technology Development Support (J2EE Engine)
SAP Labs, Palo Alto, Ca (USA)

Error in Starting Visual Administration - SSO Configuration

We have installed EP 7 SP 14 on Enterprise Linux 5.0
Initially, i.e. after installation, only the following login module stack was used under sap j2ee engine
BasicPasswordLoginModule - SUFFICIENT
To check the SSO with other nw 7 java system in our landscape, I have changed it to the following using Visual Administration
EvaluateTicketLoginModule - SUFFICIENT
BasicPasswordLoginModule - OPTIONAL
CreateTicketLoginModule - REQUISITE
I have restarted ep
Now, I am able to login to the system using Administrator login from the browser.
I checked the SSO. It was not working.
I tried to log in to Visual Administrator to make changes, its giving me the following error
Error while connecting
com.sap.engine.services.security.exceptions.BaseLoginException: Access Denied.
How do I proceed ?
Rgds,
Santosh

Given below is the output from the log file security.0.log available at
/usr/sap/DEP/JC00/j2ee/cluster/server0/log/system
#1.#00505696557D00650000002A0000779100045465B00B0CB5#1218695628786
#/System/Security/Authentication
#sap.com/irj
#com.sap.engine.services.security.authentication.logincontext
#P00101959#920##n/a##f3ef9d2069ca11ddcff800505696557d
#SAPEngine_Application_Thread[impl:3]_37##0#0#Info#1
#com.sap.engine.services.security.authentication.logincontext#Plain###LOGIN.OK
User: P00101959
Authentication Stack: ticket
Login Module                                                               Flag        Initialize Login      Commit     Abort      Details
1. com.sap.security.core.server.jaas.EvaluateTicketLoginModule             SUFFICIENT ok          false      false
2. com.sap.engine.services.security.server.jaas.BasicPasswordLoginModule   REQUISITE   ok          true       true
3. com.sap.security.core.server.jaas.CreateTicketLoginModule               OPTIONAL    ok          true       true
Central Checks                                                                                true                  #
#1.#00505696557D00650000002B0000779100045465B00B1048#1218695628787
#/System/Security/Audit#sap.com/irj
#com.sap.security.core.util.SecurityAudit
#P00101959#920##n/a##f3ef9d2069ca11ddcff800505696557d#SAPEngine_Application_Thread[impl:3]_37##0#0#Info#1
#com.sap.security.core.util.SecurityAudit#Plain###P00101959
| LOGIN.OK
| USER.CORP_LDAP.p00101959
|
| IP Address=[172.18.40.68]#
Rgds,
Santosh

Ping time out, server connection is lost in visual administrator after java

Dear all,
Recently I have done system copy for XI system. I have imported the java import after importing the abap stack into the target system as java add in abap.The import phase finished successfully and java engine is also working well.
I have confirmed this by moving to the browser page " http://hostname:50000/ and XI system http://hostname:50000/rep ". Everything is working fine and in MMC console as well.
But while trying to log in to visual administrator i am getting the error message as " ping time out,connection to server is lost "
std_serverout.log
unrecoverable stack overflow has occurred.
An unexpected error has been detected by HotSpot Virtual Machine:
EXCEPTION_STACK_OVERFLOW (0xc00000fd) at pc=0x00000000080e3c66, pid=2940, tid=928
Java VM: Java HotSpot(TM) 64-Bit Server VM (1.4.2_16-b05 mixed mode)
Problematic frame:
V [jvm.dll+0xe3c66]
An error report file with more information is saved as hs_err_pid2940.log
stdout/stderr redirect
node name   : server0
pid         : 3060
system name : XIT
system nr. : 03
started at : Tue Feb 17 18:42:50 2009
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
SAP J2EE Engine Version 6.40   PatchLevel 100627.313 is starting...
Loading: LogManager ... 453 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 94 ms.
Loading: ThreadManager ... 31 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 219 ms.
Loading: LockingManager ... 93 ms.
Loading: ConfigurationManager ... 1502 ms.
Loading: LicensingManager ... 31 ms.
Loading: ServiceManager ...
6.226: [GC 6.226: [ParNew: 87040K->8544K(130560K), 0.0628724 secs] 87040K->8544K(1005056K), 0.0629982 secs]
Loading services.:
Service memory started. (16 ms).
Service cross started. (15 ms).
Service file started. (78 ms).
Service timeout started. (32 ms).
Service runtimeinfo started. (15 ms).
Service userstore started. (63 ms).
Service trex.service started. (94 ms).
Service jmx_notification started. (63 ms).
Service p4 started. (235 ms).
Service classpath_resolver started. (15 ms).
10.537: [GC 10.537: [ParNew: 95584K->16246K(130560K), 0.0776272 secs] 95584K->16246K(1005056K), 0.0777727 secs]
Service deploy started. (3926 ms).
Service log_configurator started. (4363 ms).
Service locking started. (0 ms).
Service http started. (172 ms).
Service naming started. (203 ms).
Service failover started. (78 ms).
Service appclient started. (110 ms).
Service javamail started. (140 ms).
Service jmsconnector started. (140 ms).
Service ts started. (125 ms).
Service licensing started. (16 ms).
Service connector started. (188 ms).
Service configuration started. (31 ms).
service MobileSetupGeneration ================= ERROR =================
Service MobileArchiveContainer started. (78 ms).
Service webservices started. (470 ms).
Service dbpool started. (1172 ms).
13.195: [GC 13.196: [ParNew: 103286K->20423K(130560K), 0.0478316 secs] 103286K->20423K(1005056K), 0.0489244 secs]
Service com.sap.security.core.ume.service started. (2596 ms).
Service security started. (2471 ms).
Service classload started. (78 ms).
Service applocking started. (141 ms).
Service shell started. (188 ms).
Service tceCATTPingservice started. (32 ms).
Service telnet started. (63 ms).
18.218: [GC 18.218: [ParNew: 107463K->25937K(130560K), 0.0545612 secs] 107463K->25937K(1005056K), 0.0546428 secs]
Service webdynpro started. (203 ms).
Service ejb started. (532 ms).
Service dsr started. (172 ms).
Service keystore started. (485 ms).
Service ssl started. (16 ms).
Service servlet_jsp started. (704 ms).
Service tcsecsecurestorage~service started. (63 ms).
Service jmx started. (391 ms).
Service tclmctcculculservice_sda started. (0 ms).
Service rfcengine started. (656 ms).
Service tcsecwssec~service started. (469 ms).
Service apptracing started. (360 ms).
19.355: [GC 19.355: [ParNew: 112977K->42681K(130560K), 0.0844669 secs] 112977K->47563K(1005056K), 0.0845476 secs]
Service tcsecdestinations~service started. (907 ms).
Service basicadmin started. (860 ms).
Service adminadapter started. (297 ms).
Service pmi started. (312 ms).
Service tclmctcculservice_sda started. (1251 ms).
Service tcsecvsi~service started. (438 ms).
Service monitor started. (407 ms).
Service sld started. (1721 ms).
20.296: [GC 20.296: [ParNew: 129721K->39952K(130560K), 0.1028212 secs] 134603K->50894K(1005056K), 0.1028881 secs]
Service tc.monitoring.logviewer started. (1704 ms).
21.584: [GC 21.584: [ParNew: 126992K->40823K(130560K), 0.0664458 secs] 137934K->58110K(1005056K), 0.0665026 secs]
Service jms_provider started. (3518 ms).
Service com.sap.aii.af.cpa.svc started. (2033 ms).
Service com.sap.aii.af.security.service started. (16 ms).
Service com.sap.aii.af.svc started. (157 ms).
22.873: [GC 22.873: [ParNew: 127863K->43238K(130560K), 0.0574693 secs] 145150K->65266K(1005056K), 0.0575210 secs]
Service com.sap.aii.af.ms.svc started. (407 ms).
Service com.sap.aii.adapter.marketplace.svc started. (47 ms).
Service com.sap.aii.adapter.bc.svc started. (47 ms).
Service com.sap.aii.adapter.xi.svc started. (47 ms).
Service com.sap.aii.adapter.jms.svc started. (79 ms).
Service com.sap.aii.adapter.mail.svc started. (63 ms).
Service com.sap.aii.adapter.jdbc.svc started. (156 ms).
Service com.sap.aii.adapter.rfc.svc started. (219 ms).
Service com.sap.aii.af.ispeak.svc started. (313 ms).
Service com.sap.aii.adapter.file.svc started. (2315 ms).
ServiceManager started for 22082 ms.
Framework started for 24772 ms.
SAP J2EE Engine Version 6.40   PatchLevel 100627.313 is running!
PatchLevel 100627.313 December 14, 2005 20:06 GMT
>26.086: [GC 26.086: [ParNew: 130278K->23111K(130560K), 0.0693509 secs] 152306K->68371K(1005056K), 0.0694372 secs]
32.059: [GC 32.059: [ParNew: 110151K->34716K(130560K), 0.0419854 secs] 155411K->79975K(1005056K), 0.0420301 secs]
32.608: [GC 32.608: [ParNew: 121756K->43497K(130560K), 0.0827214 secs] 167015K->105659K(1005056K), 0.0827638 secs]
38.688: [GC 38.688: [ParNew: 130537K->39986K(130560K), 0.0525517 secs] 192699K->106409K(1005056K), 0.0526114 secs]
41.615: [GC 41.615: [ParNew: 127026K->32598K(130560K), 0.0467433 secs] 193449K->103188K(1005056K), 0.0467930 secs]
44.298: [GC 44.298: [ParNew: 119638K->34820K(130560K), 0.0430069 secs] 190228K->105410K(1005056K), 0.0432422 secs]
46.443: [GC 46.443: [ParNew: 121860K->39729K(130560K), 0.0498349 secs] 192450K->110319K(1005056K), 0.0499023 secs]
48.656: [GC 48.656: [ParNew: 126769K->36669K(130560K), 0.0625983 secs] 197359K->112667K(1005056K), 0.0626567 secs]
52.243: [GC 52.243: [ParNew: 123709K->39589K(130560K), 0.0477260 secs] 199707K->115587K(1005056K), 0.0477793 secs]
115.241: [GC 115.241: [ParNew: 126629K->37429K(130560K), 0.0553704 secs] 202627K->118544K(1005056K), 0.0554346 secs]
118.096: [GC 118.096: [ParNew: 124469K->40865K(130560K), 0.0504829 secs] 205584K->121980K(1005056K), 0.0505322 secs]
120.589: [GC 120.589: [ParNew: 127905K->37247K(130560K), 0.0578313 secs] 209020K->123954K(1005056K), 0.0578734 secs]
122.573: [GC 122.573: [ParNew: 124287K->39626K(130560K), 0.0534208 secs] 210994K->126333K(1005056K), 0.0534640 secs]
124.070: [GC 124.077: [ParNew: 126666K->35377K(130560K), 0.0626490 secs] 213373K->128235K(1005056K), 0.0627628 secs]
126.103: [GC 126.103: [ParNew: 122417K->37886K(130560K), 0.0485833 secs] 215275K->130744K(1005056K), 0.0486433 secs]
128.251: [GC 128.251: [ParNew: 124926K->41258K(130560K), 0.0482213 secs] 217784K->134115K(1005056K), 0.0482675 secs]
130.792: [GC 130.792: [ParNew:
Due to this i am not able to log in visual adminsitrator.Kindly advice me for the same.
Thanks in advance
Vijay

Hello vamshi,
As you have suggeseted, I followed the notes and changed the following paramters.The system is 64bit and hence the values are adjusted according to the server.
-Djco.jarm=1
-Dsun.io.useCanonCaches=false
-Djava.awt.headless=true
-XX:SoftRefLRUPolicyMSPerMB=1
-verbose:gc
-XX:+PrintGCDetails
-XX:+PrintGCTimeStamps
-Xss2m
-Xms2048M
-Xmx2048M
-XX:MaxNewSize=320M
-XX:NewSize=320M
-XX:MaxPermSize=512M
-XX:PermSize=512M
-XX:SurvivorRatio=2
-XX:TargetSurvivorRatio=90
-XX:+UseParNewGC
-XX:+UseTLAB
-XX:+HeapDumpOnCtrlBreak
The heap size for java is 2048
But still i am getting the ping time out. Connection to server is lost.
Kindly let me know,
Regards
Vijay

Problem when login to Visual Administrator

Hi all,
Here is a problem while login into visual administrator.when i run go.bat file it is throwing a syntax error.
So,can anyone suggest me how to resolve.
As i need to active the services to run AE for Netweaver PI.
Thanks,
Kalyan.

Hi,
Try logging on the ABAP stack withthe J2EE_ADMIN and changing the password there.
Or you can update the password in the secure store area (admin/password<SID>)of the configtool.bat.
Try this very simple procedure and also try to check the below things also but try the first option.
Please follow steps one by one. it should resolve your issue.
Reasons for this issue; plz check it one by one.
1. Did you configure with ABAP? if yes, plz do below steps:
Plz assign SAP_J2EE_ADMIN role to J2EE_ADMIN user.
2. VA login dialog; Please check Port(5xx04) is right?
3. Admin password is wrong or lockecd.
If yes, Activate SAP* then reset or unlock it. For this jus follow below steps:
If you forgot or lock "Administrator or J2EE_ADMIN" password just follow below steps:
STEP-1: Enable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = TRUE"
4.Double-click on the property "ume.superadmin.password=<Enter any password ex: abc123>"
5.Save.
6.Restart the engine.
STEP-2: Login with "SAP*" into portal
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / password as" SAP* / <password ex: abc123>"
3. Search for "Administrator" user
4. Reset or change password for "Administrtor"
STEP-3: Disable "SAP*"
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2.Goto cluster-data --> Global server configuration --> services --> com.sap.security.core.ume.service
3.Double-click on the property "ume.superadmin.activated = FALSE"
4.Save.
5. Restart the engine.
STEP-4: Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please reward points if it helps
Thanks
Vikranth

User Authentication Failed via http BUT not with Visual Administrator !!?

OS : Win 2k3 Server UK * DB : SQL Server 2005
SAP Netweaver 2004s Application Java
Hi All,
Since a couple of days, I have a problem concerning authentication to the java apllication on a SAP Netweaver 2004s.
Using the user Administrator, I CAN logon the Visual Administrator tool, with the same user I tried to logon via http://host:port/nwa without success.
At the beginning, I was thinking about a problem of password then I enabled the emergency user SAP*, the problem was the same. Ok with Visual Administrator but not via http.
Here is two logs found in folder : D:\usr\sap\SID\JC02\j2ee\cluster\server0\log\system\
 security.3.log
 #1.5#001871E5EA3A00550000006D0000172800043B836D838427#1191335570983#/System/Security/Audit#sap.com/com.sap.security.core.admin#com.sap.security.core.util.SecurityAudit#Guest#0####5aac137070f411dcc513001871e5ea3a#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest | LOGIN.ERROR | null | | Login Method=[default], UserID=[Administrator], IP Address=[192.168.10.125], Reason=[Authentication did not succeed.]#
 server.0.log
 #1.5#001871E5EA3A0052000000130000172800043B835E3661D1#1191335314249#/System/Server/SLDService##com.sap.sldserv.SldServerFrame######c1a349a070f311dcaa68001871e5ea3a#SAPEngine_System_Thread[impl:5]_71##0#0#Warning#1#com.sap.sldserv.SldServerFrame#Plain###Failed to collect SLD data. Failed to send HTTP data: 401 : Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there.#
 I tried to connect http://host:port/sld same problem User Authentication Failed
Do you have an idea for me? Why a user can connect via Visual Administrator and not via the http interface?
Thanks in advance
Yves

Hi,
I found the solution this last week-end.
This behavior let's thinking to a problem of authentication.
But the problem was in SQL, an index was missing in table J2EE_CONFIG, called J2EE_CONFIG_I3
Cheers
Yves

Rfc adapter stops in j2ee visual administrator

Hi,expert:
The rfc adapter stops in j2ee visual administrator and i can't start it!
what's the matter?
regards
ming

can you check the logs in visual admin. restart your adapter engine and j2ee.
Regards
sreeram.g.reddy

Can not start Visual Administrator (halt at 99%)

Hi,
When I start Visual Administrator, its status halt at 99%.
Visual Administrator can not open normally.
The version is EP7.0 SP11.
Could anyone help me? thanks!

Hi Chai Ming,
Can you see anything in the log files? Perhaps it's a permissions issue?
Try creating a brand new connection from scratch rather than using the default and connect using that and generaly a server restart will do the trick in fixing it. Although clearly this is not a long term solution.
Visual Administrator is being replaced by the web administrator located http://<host>:<port>/nwa.
If you cannot restart or find a fix you might like to simply start using the webinterface when possible.
Not a solution I know, but thought the tip might help.
Cheers

Dispatcher - J2EE status unavailable, J2EE Visual Administrator unavailable

Greeting experts,
I present to you a problem that my company is having trying to get Portal and the WAS up and running. I was handed this box after a former employee left our company. There was no knowledge handover, so I am looking at a black box. The main problem we are having is our main server (double stack ABAP and J2EE) simply will not get the Java stack up and running no matter how much we tweak the profiles or play with the network. I have been searching these forums for answers, and while I have gained a great deal of knowledge form the very generous people on this site, my problem still eludes me. I hope I can provide enough technical answers to help anyone that might have an idea of what I can do.
SAP Management Console - disp+work.exe: Running but Dialog Queue info unavailable, J2EE status info unavailable.
J2EE Visual administrator - Unable to log onto localhoast
Windows Event Viewer: SAP-Basis System: Transaction Canceled ITS_P 001 ( )
Instance Profile:
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTI386
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
jstartup/trimming_properties = off
jstartup/protocol = on
jstartup/vm/home = D:\j2sdk1.4.2
jstartup/max_caches = 500
jstartup/release = 700
jstartup/instance_properties = $(jstartup/j2ee_properties);$(jstartup/sdm_properties)
j2ee/dbdriver = D:\sapdb\programs\runtime\jar\sapdbc.jar
PHYS_MEMSIZE = 2048
#old_value: 5
rdisp/wp_no_dia = 10
#old_value: 2
rdisp/wp_no_btc = 5
rdisp/j2ee_start_control = 1
rdisp/j2ee_start = 1
rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
#old_value: $(DIR_EXECUTABLE)\jcontrol$(FT_EXE)
exe/j2ee = $(DIR_EXECUTABLE)\jcontrol.exe
rdisp/j2ee_timeout = 600
rdisp/frfc_fallback = on
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
#old_value: PROT=HTTP,PORT=5$$80
icm/server_port_0 = PROT=HTTP, PORT=51080, TIMEOUT=900
SAP Messaging Service parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
rdisp/wp_no_enq = 2
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 1
rdisp/wp_no_spo = 1
rsdb/dbid = ERP
dbs/ada/schema = SAPERP
#old_value: 300000
abap/buffersize = 350000
login/no_automatic_user_sapstar = 0
login/password_history_size = 1
login/min_password_lng = 4
Jcontrol: Migrated Profile Parameter
 create at Wed Jun 06 06:43:16 2007
#old_value: 1039293
j2ee/instance_id = ID1039293
rdisp/max_wprun_time = 100000
Added by TH 21.06.07 (int. ITS, int. IPC)
ssl/ssl_lib = d:\usr\sap\ERP\DVEBMGS10\sec\sapcrypto.dll
sec/libsapsecu = d:\usr\sap\ERP\DVEBMGS10\sec\sapcrypto.dll
ssf/ssfapi_lib = d:\usr\sap\ERP\DVEBMGS10\sec\sapcrypto.dll
icm/host_name_full = iwdfvm2160.wdf.sap.corp
#old_value: PROT=HTTP, PORT=1080, TIMEOUT=900
icm/server_port_0 = PROT=HTTP, PORT=51080, TIMEOUT=900
#old_value: PROT=HTTPS,PORT=51081, TIMEOUT=900
icm/server_port_1 = PROT=HTTPS, PORT=51081, TIMEOUT=900
#old_value: PROT=SMTP,PORT=25001, TIMEOUT=900
icm/server_port_2 = PROT=SMTP, PORT=25001, TIMEOUT=900
vmcj/enable = on
#vmcj/option/ps = 512M
#vmcj/option/maxJavaHeap = 200M
login/accept_sso2_ticket = 1
#parameter created by: IDADMIN 27.04.2006 20:04:36
#em/global_area_MB = 384
#old_value: 1 changed: J2EE_ADMIN 11.08.2006 19:02:40
#old_value: 2 changed: J2EE_ADMIN 11.08.2006 19:11:41
#old_value: 1 changed: CHENW 11.08.2006 19:12:57
login/create_sso2_ticket = 2
icm/keep_alive_timeout = 900
#parameters added for xCQM / PDCE
enque/table_size = 8192
abap/shared_objects_size_MB = 200
Thanks for anyone that can help with this. It is much appreciated, as it has stumped our BASIS guys for weeks.
Cheers
Ryan Geiger

(logs cont.)
dev_w0:
B Wed Jul 29 01:13:59 2009
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\ERP\DVEBMGS10\exe\dbsdbslib.dll' ...
B Library 'D:\usr\sap\ERP\DVEBMGS10\exe\dbsdbslib.dll' loaded
B Version of 'D:\usr\sap\ERP\DVEBMGS10\exe\dbsdbslib.dll' is "700.08", patchlevel (0.184)
B New connection 0 created
M sysno 10
M sid ERP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 185
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 8420
M
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 8420) [dpxxdisp.c 1347]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 34080 (1704)
M DpShMCreate: sizeof(tm_adm) 4415616 (21968)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1544)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06A60040, size: 5091280)
M DpShMCreate: allocated sys_adm at 06A60040
M DpShMCreate: allocated wp_adm at 06A62118
M DpShMCreate: allocated tm_adm_list at 06A6A638
M DpShMCreate: allocated tm_adm at 06A6A668
M DpShMCreate: allocated wp_ca_adm at 06EA06E8
M DpShMCreate: allocated appc_ca_adm at 06EA64E8
M DpShMCreate: allocated comm_adm at 06EA8428
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06F292E8
M DpShMCreate: allocated gw_adm at 06F29328
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06F29358
M DpShMCreate: allocated wall_adm at 06F29360
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Wed Jul 29 01:14:00 2009
M ThInit: running on host tx300-s4
M
M Wed Jul 29 01:14:01 2009
M calling db_connect ...
C
C DBSDBSLIB : version 700.08, patch 0.184 (Make PL 0.185)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.184) Create index serial for MaxDB 7.6 (note 1267841)
C (0.184) More trace in case of packed to string conversion error (note 1262799)
C (0.182) R3trans export aborts with signal 6 (note 1262245)
C (0.169) Support DB-Type 'SAP DB' by UPDSTAT (note 1225668)
C (0.167) DB2 - z/OS: performance improvement for long running LUWs (note 1179742)
C (0.158) No truncation warnings with tracelevel 1 (note 1164122)
C (0.152) Corrections of odbc-based dbsl (note 1135165)
C (0.144) MSSQL: ODBC fastload on separate connection (note 1131805)
C (0.144) I5/OS ldappasswd support for 5250 terminal. (note 1129573)
C (0.139) Return DS_SQLERR instead of DS_CONNECTERR (note 1121076)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 002-121-083-965
C SQLDBC Library Version : libSQLDBC 7.6.4 BUILD 016-123-191-583
C SQLDBC client runtime is MaxDB 7.6.4.016 CL 191583
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C
C Wed Jul 29 01:14:02 2009
C Attach to SAP DB : Kernel 7.6.04 Build 016-123-191-583
C Database release is SAP DB 7.6.04.016
C INFO : Database 'ERP' instance is running on 'iwdfvm2160'
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPERP'
C Command info enabled
C Now I'm connected to SAP DB
C 00: iwdfvm2160-ERP, since=20090729011401, ABAP= <unknown> (0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090729 011401 iwdfvm2160
C INFO : SAP RELEASE (DB) = 700
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Jul 29 01:14:04 2009
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0A590040, size: 4400000)
M SHM_ROLL_AREA (addr: 2C520040, size: 268435456)
M SHM_PAGING_AREA (addr: 12D70040, size: 131072000)
M SHM_ROLL_ADM (addr: 0A9D0040, size: 2678942)
M SHM_PAGING_ADM (addr: 0AC60040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0ACF0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 071B0040
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
B dbntab: NTAB buffers attached
B dbntab: Buffer FTAB(hash header) (addr: 0AE10088, size: 536)
B dbntab: Buffer FTAB(anchor array) (addr: 0AE102A0, size: 160036)
B dbntab: Buffer FTAB(item array) (addr: 0AE373C8, size: 720000)
B dbntab: Buffer FTAB(data area) (addr: 0AEE7048, size: 30720000)
B dbntab: Buffer IREC(hash header) (addr: 0CC40088, size: 536)
B dbntab: Buffer IREC(anchor array) (addr: 0CC402A0, size: 160036)
B dbntab: Buffer IREC(item array) (addr: 0CC673C8, size: 180000)
B dbntab: Buffer IREC(data area) (addr: 0CC932E8, size: 6144000)
B dbntab: Buffer STAB(hash header) (addr: 0D270088, size: 536)
B dbntab: Buffer STAB(anchor array) (addr: 0D2702A0, size: 160036)
B dbntab: Buffer STAB(item array) (addr: 0D2973C8, size: 180000)
B dbntab: Buffer STAB(data area) (addr: 0D2C32E8, size: 3072000)
B dbntab: Buffer TTAB(hash header) (addr: 0D5C0088, size: 2616)
B dbntab: Buffer TTAB(anchor array) (addr: 0D5C0AC0, size: 160036)
B dbntab: Buffer TTAB(item array) (addr: 0D5E7BE8, size: 480000)
B dbntab: Buffer TTAB(data area) (addr: 0D65CEE8, size: 5840000)
B db_con_shm_ini: WP_ID = 0, WP_CNT = 20, CON_ID = -1
B dbstat: TABSTAT buffer attached (addr: 1AA8F048)
B dbtbxbuf: Buffer TABL (addr: 0DBF00C8, size: 30000000, end: 0F88C448)
B dbtbxbuf: Buffer TABLP (addr: 108F00C8, size: 10240000, end: 112B40C8)
B dbexpbuf: Buffer EIBUF (addr: 0F8900D0, size: 4194304, end: 0FC900D0)
B dbexpbuf: Buffer ESM (addr: 112C00D0, size: 4194304, end: 116C00D0)
B dbexpbuf: Buffer CUA (addr: 0FCA00D0, size: 3072000, end: 0FF8E0D0)
B dbexpbuf: Buffer OTR (addr: 116D00D0, size: 4194304, end: 11AD00D0)
B dbcalbuf: Buffer CALE (addr: 11AE0040, size: 500000, end: 11B5A160)
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 05E06C90
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 126500A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 126505F0
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2236 bytes
S immediate print option for implicitely closed spool requests is disabled
A **GENER Trace switched on ***
A
A -PXA--
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 23068kb, dir_size: 22988kb.
A Attached to PXA (address 3C550040, size 350000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=5D44C000 leng=209698816 end=69C48000)
A >> Shm MMADM area (addr=5FEFAC30 leng=1278592 end=60032EB0)
A >> Shm MMDAT area (addr=60033000 leng=163659776 end=69C47000)
A RFC Destination> destination tx300-s4_ERP_10 host tx300-s4 system ERP systnr 10 (tx300-s4_ERP_10)
A RFC Options> H=tx300-s4,S=10,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 41588 bytes at 071D0040
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\ERP\DVEBMGS10\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...completed with return code 5.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:700.08]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.185.20050900]
W ITS Plugin: Int.version, [33]
W ITS Plugin: Feature set: [19]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
A
A Wed Jul 29 01:14:05 2009
A **GENER Trace switched off ***
M SosICreateNewAnchorArray: sos_search_anchor_semantics = 1
B
B Wed Jul 29 01:14:09 2009
B table logging switched off for all clients
M
M Wed Jul 29 01:14:25 2009
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 06A30040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 06A307A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 06A307E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 06A307EC
M *** ERROR => SosIAnchorArrayCreatable: T21/M0 in state cancel [thxxtool2.c 947]
W
W Wed Jul 29 01:15:06 2009
W *** ERROR => plugin: Invalid request method (ICMTRGURLUPLD). Request aborted. [itsphttp.cpp 618]
M ***LOG W08=> ICMTRGURLUPLD& [itsphttp.cpp 619]
W *** ERROR => plugin: ItspAgat_InitContext failed, rc = 1 [itspxkrn.cpp 174]
W *** ERROR => Failed to create new session, rc: 0x1 [itspxx.cpp 712]
W *** ERROR => itsp_OpenSession failed rc = 1, send icf error page [itsplxx.c 878]
M ***LOG W03=> [itsplxx.c 879]
W *** ERROR => ipl_OpenSession returns 1(ITSPE_FAILURE) [itsplxx.c 881]
W *** ERROR => Raise Last error:[1 from: itspxx.cpp :713] [itsplxx.c 1216]
W *** ERROR => RaiseError(sapdext) ITS_P:01 [itspxx.cpp 713]
W
W Wed Jul 29 01:16:06 2009
W *** ERROR => plugin: Invalid request method (ICMTRGURLUPLD). Request aborted. [itsphttp.cpp 618]
M ***LOG W08=> ICMTRGURLUPLD& [itsphttp.cpp 619]
W *** ERROR => plugin: ItspAgat_InitContext failed, rc = 1 [itspxkrn.cpp 174]
W *** ERROR => Failed to create new session, rc: 0x1 [itspxx.cpp 712]
W *** ERROR => itsp_OpenSession failed rc = 1, send icf error page [itsplxx.c 878]
M ***LOG W03=> [itsplxx.c 879]
W *** ERROR => ipl_OpenSession returns 1(ITSPE_FAILURE) [itsplxx.c 881]
W *** ERROR => Raise Last error:[1 from: itspxx.cpp :713] [itsplxx.c 1216]
W *** ERROR => RaiseError(sapdext) ITS_P:01 [itspxx.cpp 713]

Error in Visual Administrator

Hi...
I'm creating a jCo RFC Provider, in my Visual Administrator.
I put the parameters, but, when I try to start my jCo RFC provider, I've recieving this message:
Error starting bundle, see LOG for details!
So, my question is:
-> Where is my "LOG file, for details"?!
Thanx!

Well... now I'm getting this error messages:
#1.5 #0019B9D7727100720000000C00026AF8000453CAF55BFD6B#1218031071812#/System/Server##com.sap.engine.services.rfcengine.Bundle.initialize()#Administrator#93####270d9d9063bf11ddab6c0019b9d77271#SAPEngine_Application_Thread[impl:3]_8##0#0#Error#1#com.sap.engine.services.rfcengine#Java###Failed to create a repository for RFCEngine Bundle MY_PROVIDER##
#1.5 #0019B9D7727100720000001000026AF8000453CAF55C05D8#1218031071812#/System/Server##com.sap.engine.services.rfcengine.RFCRuntimeInterfaceImpl.addBundle(BundleConfiguration conf)#Administrator#93####270d9d9063bf11ddab6c0019b9d77271#SAPEngine_Application_Thread[impl:3]_8##0#0#Error#1#com.sap.engine.services.rfcengine#Java###Bundle can not be added MY_PROVIDER##
#1.5 #0019B9D7727100720000001200026AF8000453CAF55C3545#1218031071828#/System/Server##com.sap.engine.services.rfcengine.RFCRuntimeInterfaceImpl.addBundle(BundleConfiguration conf)#Administrator#93####270d9d9063bf11ddab6c0019b9d77271#SAPEngine_Application_Thread[impl:3]_8##0#0#Error#1#com.sap.engine.services.rfcengine#Java###Error changing bundle MY_PROVIDER#1#MY_PROVIDER#
What is happening?
Thanx!

Unable to connect to NWA and Visual administrator

HI all - I have Java stack installed i at its own database which coexists with another ABAP stack on same virtual machine.
I am not able to connect to Visual administrator to install the saplicens. connection error is as follow
Unable to connect to hostname:50104.
I have checked the value of p4 using configtool and it is 50104.
I have 2 extra emergency users that I have created to make sure if do not face user errors. Since DNS is not resolving FQHN, I have updates /etc/hosts file in my pc to make sure there are no network issues.
The only error I see is in ms_dev which is indicating saplicense has been expired.
Any idea, how to solve this problem?
DB= Oracle 10.2.0.2
CRM JAVA 7.0 EHP1
CRM ABAP 7.0 EHP1
Instances CJX(Java instance) and CSX (ABAP)
Tnsnames Listener and tnscsx
Your help is appreciated.
Regards
K

Hi Sunny, Thx for taking a look. I think I am in right direction after checking the logs. I did not have a chance to configure UME afterthe install. I am not sure if I should use APAP stack as the source. In the same time, My license is expired and can not connect to NWA or Visual admin.
Here are the logs
System trace:
#1.#C0000A6717E800020000000001762FC700047ECE97733050#1265325676114#/System/Serve
r/VisualAdministrationTool##com.sap.engine.services.adminadapter.gui.tasks.Login
Task#######Thread[Thread-9,6,main]##0#0#Error#1#/System/Server/VisualAdministrat
ionTool#Plain###Error while trying to login to localhost: Cannot create new Remo
teLoginContext.#
Trace files:
#1.#C0000A6717E800010000000101762FC700047ECE910D3800#1265325568767#com.sap.engin
e.services.adminadapter.gui.tasks.LoginTask##com.sap.engine.services.adminadapte
r.gui.tasks.LoginTask#######Thread[Thread-5,6,main]##0#0#Error#1#/System/Server/
VisualAdministrationTool#Java###Error while trying to login to localhost: Cannot
create new RemoteLoginContext.
[EXCEPTION]
#1#com.sap.engine.services.security.exceptions.BaseLoginException: Cannot cr
eate new RemoteLoginContext.
 at com.sap.engine.services.security.remote.login.RemoteLoginContext.<ini
t>(RemoteLoginContext.java:71)
 at com.sap.engine.services.adminadapter.gui.tasks.LoginTask.connectActio
n(LoginTask.java:98)
 at com.sap.engine.services.adminadapter.gui.tasks.LoginTask.run(LoginTas
k.java:81)
 at java.lang.Thread.run(Thread.java:534)
Caused by: com.sap.engine.services.rmi_p4.P4IOException: Cannot open connection
on host: 10.103.23.232 and port: 50104
 at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(
P4ObjectBrokerClientImpl.java:706)
 at com.sap.engine.services.rmi_p4.ConnectionManager.getConnection(Connec
tionManager.java:257)
 at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitia
lReference(P4ObjectBrokerClientImpl.java:154)
 at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitia
lReference(P4ObjectBrokerClientImpl.java:113)
 at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.resolveInitia
lReference(P4ObjectBrokerClientImpl.java:109)
 at com.sap.engine.services.security.remote.login.RemoteLoginContext.<ini
t>(RemoteLoginContext.java:60)
 ... 3 more
Visualadmin console:
log generation timestamp : 2010_02_04_at_07_55_27
Feb 4, 2010 7:56:45 AM [1265291805268]:Error : Thread[Thread-9,5,main]
 com.sap.engine.services.rmi_p4: com.sap.engine.services.
rmi_p4.Parser newRequest MSG:The possible problem is that there is no correctly
working server node available. Check your working servers
Feb 4, 2010 8:02:41 AM [1265292161634]:Error : Thread[Thread-23,6,main]
 com.sap.engine.services.rmi_p4: com.sap.engine.services.
rmi_p4.Parser newRequest MSG:The possible problem is that there is no correctly
working server node available. Check your working servers

Visual Administrator logs

Similar Messages

Maybe you are looking for