Visual Adminstrator: can not create new users

Hi,
I've got a problem with my "Sneak Preview SAP NetWeaver 04 - Full Java Edition with Web AS Java 6.40, MaxDB, and Developer Studio" (NW04 SP15) installation. Whenever I start the visual administrator I can not create a new user. All buttons excepting the Refresh Button are disabled.
If I use the web (http://..../useradmin) I can create new users.
Now I want to change Security Policies in the Visual Administrator. But the problem is the same.
Does anyone know any solution?
Best Regards,
tobi

Hi Tobias,
In VA => Security Provider there is a change button ("pencil") in the top of the right frame. You should enable other buttons by clicking this one.
Regards,
Mike

Similar Messages

  • Master Data Services - Can not add new User and MDS can not Identify LOCAL Users

    Team,
    We are using  SQL Server 2008 R2 and system working since long and suddenly we observed mentioned two issues. The server MyServer is already restarted but did not help.  The MDS installed and configured on SAME Machine (MyServer).
      I  have two issues here.
    1. MDM website can not Identify the local Users (MyServer\MyUser).
    The User created on local Machine (MyServer\MyUser). I logged into MDM website using Admin login and click on User and Permission. Then I click on add and Text box appears to type UserName. Here I type "MyServer\MyUser" (MyServer\MyUser is already
    exists and working since long). Then click checkName; I received a message "No exact Match was found for MyServer\MyUser". Where as User from OTHER domain identified in MDM but could not identify ONLY the local users like "MyServer\MyUser".
    2. Can not add new user in Existing working MDM.
    I created windows user on machine (MyServer\MyUser1) and add it in UserGroup having an access to MDM. and then I tried to login to MDM using newly created user (MyServer\MyUser1) ; I see error Access Is Denied. The Permission assigned to UserGroup (not
    to individual user). The new User (MyUser1) should automatically get added in MDM once logged in. This is working for existing users in UserGroup; BUT NOT ONLY for new user (MyUser1).

    Now I Solved this problem in my case.
    I just grant again all permissions according http://msdn.microsoft.com/en-us/library/ff486994.aspx. Now all work fine.
    Hope, it will help 

  • Can't create new users after GroupWise is moved from NetWare to Linux

    Hi,
    I moved GroupWise (Version 6.5 SP 6, single domain and single office)
    from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
    GroupWise server is running oaky. Existing users are able to connect
    their mail box and send and receive messages. But I can't create new
    users on the GroupWise server.
    I used ConsoleOne installed on the Linux server to create new GroupWise
    users. It seemed that I was able to do it. The new users appear on the
    NDS and the GroupWise File IDs were assigned for these users. And I was
    able to add these new users to distribution lists. But the users DB
    files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
    server and they cannot connect to the server. Old users cannot find them
    in Novell GroupWise Address book.
    Does anyone how to fix the problem?
    Thanks in advance!
    Jinkang

    Hi,
    [email protected] wrote:
    >
    > Hi,
    >
    > I moved GroupWise (Version 6.5 SP 6, single domain and single office)
    > from NetWare 6.5 server to SUSE Linux Enterprise server 9. It seems the
    > GroupWise server is running oaky. Existing users are able to connect
    > their mail box and send and receive messages. But I can't create new
    > users on the GroupWise server.
    >
    > I used ConsoleOne installed on the Linux server to create new GroupWise
    > users. It seemed that I was able to do it. The new users appear on the
    > NDS and the GroupWise File IDs were assigned for these users. And I was
    > able to add these new users to distribution lists. But the users DB
    > files (userXXX.db) were not created under /grpwise/po/ofuser on the Linux
    > server and they cannot connect to the server. Old users cannot find them
    > in Novell GroupWise Address book.
    >
    > Does anyone how to fix the problem?
    This clearly sounds like your domain (which is the part of groupwise
    which you admin against) doesn't/can't talk to the postoffice, so the
    change you made (to the domain) does never get to the PO (which is where
    the addressbook of your other users come from, and is what is
    responsible for creating the user DB). This seems very likely to be
    caused by your move not being done properly, and old information (either
    path or IP address) for the PO still being in the domain and/or domain
    database.
    So how's the domain linked to the PO?
    CU,
    Massimo Rosen
    Novell Product Support Forum Sysop
    No emails please!
    http://www.cfc-it.de

  • Updated Mac Air to Mountain Lion and now I can not create new email in Hot Mail

    Updated Mac Air to Mountain Lion and now I can not create new email in Hot Mail

    Greetings,
         What you posted is rather vague. By doesn't work do you mean the applications don't open at all or are you getting a message stating that your product needs activation? If it's product activation then that is something that Microsoft will have to assist you with. If your problem is that the applications simply won't open you may have to uninstall and reinstall Office again. This is common on the Windows platform too. Rarely when you upgrade to a new OS Office sometimes has an issue with the upgrade and won't open correctly. I would suggest merely uninstalling and reinstalling. Nine times out of ten that helps.

  • Can't create new users in Administration Services Console

    Hi,
    I am following directions in the Essbase DBA guide for creating new users, as it says you must create a partition user to work with Samppart and Sampeast applications. It tells me to log on to Administration Services Console, go to the Administration Server, and right-click on users to create a new user. However, when I right-click, the option to Create New User is light grey and not clickable, neither is the option to refresh users. Can anyone tell me why I can't create a new user? I am logged in with the username: admin password: password that I set during configuration and that should be the Administrative account.

    Hi,
    What version are you using? If it is 9 then you need to create the user in shared services. I just checked and the option to create a user is greyed out for me too and I am an admin.
    It sounds like you haven't externalised the users which is why the option to do a refresh is not there.
    Thanks,
    Nathan

  • If you can't 'Create new user account' - try this!

    Over the last few days I've wasted many hours trying unsuccessfully to create a new user account so I can post to Apple Discussions. Kept going round an endless loop, back to the 'Create New User Account' form. Tried every possible solution I found through internet searches, to no avail.
    The answer, for me, turned out to be simply choosing a different alias - one that nobody else was using, presumably.
    Why, oh why, isn't there an error message that tells you this? It would have saved me so much time and frustration - and many other people too, I'm sure.

    Welcome, finally, to Discussions - you are not the first to complain about this, if you like, you can go to app.com/feedback and register your complain there as well.

  • Error in installing BAM, can not create orabam user

    Hi all,
    I tried install Oracle BAM and always getting the same problem. Error at creating orabam user.
    Any idea?
    Afonso

    hi all
    having same problem
    i can cannot create orabam user
    my oracle home is set
    i have also set my path ahead of oracle home
    C:\OracleBAM\ClientForBAM\bin in environmental variable..
    i can login into my database as sysdba also
    but when screen goes to create ORABAM USER it gives me the error cannot create the user
    kindly help pls
    CHeers

  • I can not create new bookmarks. New bookmarks don't show up in my bookmarks list.

    i have a list of about 20 bookmarks but i can not add new bookmarks to it.

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • Can't create new user account....

    Hi- I am trying to create a new user account so that I can see if some of the issues I am having with my G4 Mac also are issues under a different account. I have (several times) created a new account and assigned a password and also tried having no password. Either logging out or using Fast User Switching, I click on the new user icon and either type in the password (I know I have it correct since it's my default password) or not type it in if I have no password set, and click on login. That's when I get the shaking window. No matter what I do, I can't login!! I am at a loss of what to do or what could be causing this. Any help will make me a happy Mac user again! Judy
    PS- After I had this problem surface, I ran Monoligual and got rid of lots of language support and I also ran Font Nuke to clean out some font caches.... but these were run after I had problems setting up a new user account. I was having issues with the new upgrade for my genealogy program, Reunion (still having issues actually-they can't figure out what's causing the problem) and I removed some "things" from Login Items. Can't tell you what they were but I have some there still. I ran Disk Warrior and iDefrag also recently. Also have repaired permissions. The other issue I had (yesterday anyway-haven't used it much today yet) is that Safari was crashing when I was accessing my public library's online catalog............. I don't know if any of these are related to my inability to create a new user account or not but thought I'd throw that into the mix.

    You say a dialog comes up for you to enter a password when you don't have a password while using Fast User Switching. That should not happen.
    If you set up an account without setting the password, Fast User Switching won't bring up the password dialog for that account. Instead, it will instantly switch to that account when you choose it.
    Make sure there is nothing in the password field when you set up the account, or change the password and don't type anything in for either the new or verify fields. It'll ask you to confirm that you don't want a password and "Cancel" will be the default button. Choose the "Ok" button instead.
    That should do it. If not, then I have no idea.

  • Can't create new user, Permission Errors in Console

    I just purchased a new 2013 iMac with a 3TB Fusion Drive. I'm trying to dig and fing out why I'm currently unable to create and log in to another user account. I haven't manually changed any permissions in the terminal, and I've booted into recovery mode and attempted restore all Disk Permissions (my next step is to run Onyx). After creating a new user account, when attempting to log into it, the log in screen hangs and just loads endlessly. The console output is as follows:
    3/8/13 9:23:00.852 PM
    SecurityAgent[417]
    Login Window login proceeding
    3/8/13 9:23:01.010 PM
    loginwindow[79]
    ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    3/8/13 9:23:01.034 PM
    WindowServer[110]
    Session 257 retained (2 references)
    3/8/13 9:23:01.034 PM
    WindowServer[110]
    Session 257 released (1 references)
    3/8/13 9:23:01.062 PM
    loginwindow[420]
    Login Window Application Started
    3/8/13 9:23:01.072 PM
    WindowServer[110]
    _CGXNewConnectionPort: Call from workspace.  Updating audit session 100000 -> 100014
    3/8/13 9:23:01.073 PM
    loginwindow[420]
    **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    3/8/13 9:23:01.090 PM
    WindowServer[110]
    Created shield window 0x74 for display 0x41dc9d00
    3/8/13 9:23:01.091 PM
    WindowServer[110]
    Display 0x41dc9d00: VirtualDisplay Unit 0; ColorProfile { 1, "Default(sRGB IEC61966-2.1)"}; TransferFormula (1.000000, 1.000000, 1.000000)
    3/8/13 9:23:01.109 PM
    launchctl[422]
    com.apple.findmymacmessenger: Already loaded
    3/8/13 9:23:01.127 PM
    com.apple.SecurityServer[16]
    Session 100014 created
    3/8/13 9:23:01.128 PM
    hidd[84]
    CGSShutdownServerConnections: Detaching application from window server
    3/8/13 9:23:01.128 PM
    hidd[84]
    CGSDisplayServerShutdown: Detaching display subsystem from window server
    3/8/13 9:23:01.129 PM
    WindowServer[110]
    _CGXNewConnectionPort: Call from workspace.  Updating audit session 100014 -> 100014
    3/8/13 9:23:01.134 PM
    loginwindow[420]
    Login Window Started Security Agent
    3/8/13 9:23:01.150 PM
    airportd[424]
    _doAutoJoin: Already associated to “Network Name”. Bailing on auto-join.
    3/8/13 9:23:01.176 PM
    SecurityAgent[431]
    MacBuddy was run = 0
    3/8/13 9:23:01.183 PM
    SecurityAgent[431]
    User info context values set for NewUserAccount
    3/8/13 9:23:01.212 PM
    UserEventAgent[426]
    cannot find useragent 1102
    3/8/13 9:23:01.372 PM
    loginwindow[420]
    Login Window - Returned from Security Agent
    3/8/13 9:23:01.375 PM
    loginwindow[420]
    ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    3/8/13 9:23:01.378 PM
    loginwindow[420]
    USER_PROCESS: 420 console
    3/8/13 9:23:01.381 PM
    loginwindow[420]
    Can not connect to /var/run/systemkeychaincheck.socket: Permission denied
    3/8/13 9:23:01.384 PM
    com.apple.launchd[1]
    (com.apple.launchd.peruser.504[434]) Job failed to exec(3) for weird reason: 13
    3/8/13 9:23:01.385 PM
    com.apple.launchd[1]
    (com.apple.launchd.peruser.504) Throttling respawn: Will start in 10 seconds
    3/8/13 9:23:01.395 PM
    airportd[424]
    _doAutoJoin: Already associated to “Network Name”. Bailing on auto-join.
    3/8/13 9:23:11.386 PM
    com.apple.launchd[1]
    (com.apple.launchd.peruser.504[436]) Job failed to exec(3) for weird reason: 13
    3/8/13 9:23:11.386 PM
    com.apple.launchd[1]
    (com.apple.launchd.peruser.504) Throttling respawn: Will start in 10 seconds
    3/8/13 9:23:20.987 PM
    warmd[63]
    [_bootcachectl_playlist_dir_for_user:2529] Assertion failed: ((*__error()) == 2): stat'ing /var/db/BootCaches/106DB82C-37AE-44CC-B0B9-6CA37911832C failed: 13 Permission denied
    3/8/13 9:23:21.387 PM
    com.apple.launchd[1]
    (com.apple.launchd.peruser.504[438]) Job failed to exec(3) for weird reason: 13
    3/8/13 9:23:21.387 PM
    com.apple.launchd[1]
    (com.apple.launchd.peruser.504) Throttling respawn: Will start in 10 seconds
    3/8/13 9:23:31.389 PM
    com.apple.launchd[1]
    (com.apple.launchd.peruser.504[445]) Job failed to exec(3) for weird reason: 13
    3/8/13 9:23:31.389 PM
    com.apple.launchd[1]
    (com.apple.launchd.peruser.504) Throttling respawn: Will start in 10 seconds
    Does anyone know what's causing the issue?

    Well, the possible fixes I tried ended up hosing my permissions (somehow considering they shouldn't have an I was re establishing root user permissions where they belonged). I had to boot into recovery mode and reinstall Mountain Lion (thank god that it keeps all of my files) and that pretty much corrected everything on it's own. Does anyone know of the exact reasoning for the above issue? Which file or folder it's coming from?

  • Can't create new user accounts

    I somehow lost the ability to create a new user account. I currently have two admin accounts and would like to create another account. I can go through the setup with name, password, etc but when i hit create i get the spinning loading sign and a beach ball for minutes. Finally, with me force quiting system prefs.
    I've run permission and disk check and everything came back fine. Is there anything i can do?
    Message was edited by: jrsz24

    If installing the COMBO didn't do the trick, then start over, reinstalling SL from the install disc, and see if that fixes the issue. If so, rerun Software Update, installing everything that pops up, repeating until your software's up to date, repair permissions, and restart. If not, then I'm out of ideas and you need to contact AppleCare or take the machine into an Apple repair station.

  • I CAN'T CREATE NEW USER!!!!

    in HTMLDB v.1 I have users in "flows010600.wwv_flows_fnd_users"
    now I have apex 3.1.
    I create a new user with plsql statment and I see new user in Apex_Workspace_apex_users. but i can't login.
    then I try to create user with "manage application express users".
    when I try to login, the error is "ORA-20001: Unauthorized access (security group package variable not set)".
    thanks

    Please tell us your first name and put it into your handle and/or profile to help us.
    I create a new user with plsql statment and I see new user in Apex_Workspace_apex_users.
    Please show the PL/SQL.
    but i can't login.
    What does that mean? What were you trying to login to?
    when I try to login, the error is "ORA-20001: Unauthorized access (security group package variable not set)".
    What were you trying to login to? What page? What application?
    The subject of your post says you cannot create a new user but everything you said suggests that that is not true.
    Scott

  • Can not create new page from template

    I have been working on a new site for the last couple of
    weeks and have created several pages using a basic template.
    All of the child pages of this template still update when
    changes are made to it, however I can no long create new children
    from this template.
    Any ideas as to what the problem might be.
    THanks
    Clint

    > It is basically just creating a copy of my template, and
    not linking to it in
    > any way.
    > This allows me to change any section of the html.
    my guess is that you are opening the .dwt template file and
    doing a "Save
    As". That page is not a "child" page of the template.
    >
    > I want to be able to create new pages off this template
    and have it work like
    > all of the first pages I created.
    dw menu-->File-->New
    in the new files dialog box, click the Templates tab
    from list in left, click This Site Name
    from list in right, pick This Template
    make sure x is in box to Update if template changes
    click okay
    save file with filename you want to within this local site
    folder.
    add content to within the editable areas
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Open Directory Error -14136 occurred - Can't Create New User

    I am trying to create a new user account so a contract employee and I am repeatedly getting this error.
    The Server Reported the Error "Open Directory Error -14136 occurred" while trying to create this user.
    I've done a search for this error code and no dice. Any ideas. Is something hosed in my Directory file?
    I am hoping not to have to redo the whole lot as we are on a deadline.
    Any help would be appreciated.

    Check out this tread, you are not alone but there doesn't seem to be a single solution...
    http://discussions.info.apple.com/thread.jspa?threadID=2262981
    I had this code and MY solution came from the fact that I had turned OFF DNS because I couldn't see that "I" was using it. turning it back on and ensuring that it was correctly configured solved it for me!

  • User can't log in / Server can't create new users

    I recently updated to OS X Server 10.5.5. Now one of my users can't log in. Wrong username or password the system says. I've reset the password but it doesn't help.
    When creating a new user I get this error:
    "The server reported the error '-14120' while trying to create the user."
    How can I fix this?

    Well, to move the stuff, make a New Account, log into a different admin account & get BatchMod, it's much better/easier than the Finder for recursive Permission changes...
    http://www.lagentesoft.com/batchmod/index.html
    Now careful with BatchMod, it's crazy powerful, but easier than Command Line.
    Oh, this bad user isn't using FileVault I hope???
    OK, once BatchMod is loaded, you can drag the whole bad user's folder to it's icon and set the Ownership/permissions to the new replacement user, check Apply to Enclosed items, go.
    Oh, if you have room you might make a copy of that User's folder first & use the copy.
    Then open the bad User's folder, Select All, drag to new replacement User's folder.

Maybe you are looking for