Visual basic 6.0 source code for reading DAQ 6015 USB
I am doing a specific software in Visual Basic 6.0 to measure some characteristics of a filter.
To do that I use a NI DAQ 6015 for USB; I need to drive a pressure controller by an analogic output with an increasing (step by step) tension DC.
Can anyone give me the source code to do this.
It seems that I have another problem : the sensors give me a right tension DC, but after the MAX software gives me always +10 Volts : is it a malfunction of the card or of the software; in this last case, can anyone give me the good code.
Thanks a lot.
Hello!
Visual Basic 6.0 is now supported by NI-DAQmx 7.5, so you can directly use the NI-DAQmx drivers to use your DAQPad-6015.
You can find an analog output example in the following folder "C:\Program Files\National Instruments\NI-DAQ\Examples\Visual Basic 6.0\Analog Out\Generate Voltage\Cont Gen Volt Wfm-Int Clk". This will show you how to generate a continuous waveform.
Concerning the voltage that is at 10 volts, it looks like you misconfigure the external connection. You should take a look at the NI-DAQmx help file in the section "Measurement Fundamentals >> Signals >> Analog >> Connecting Analog Input Signals" to check that you use the correct configuration.
Best regards!
Similar Messages
-
How to get source code for WinCE 6.0 USB Camera Driver for ARM4I Processor
Hi,
I am implementing USB camera driver for my mini2440 board which has an ARM4I processor. The sample code
"Windows Embedded CE 6.0 USB camera Driver" downloaded from:
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2ef087c0-a4ae-42cc-abd0-c466787c11f2
does not support ARM4I processors. When trying to generate in VS2005 Platform Builder my WinCE 6.0
image for mini2440 with the Third party catalog items "MJPEG Decompression Filter" and "USB CameraDriver",
the linker giver errors. Please advise where to find a working source code for USB (now revision 1.1
("full-speed") is supported in my WinCE 6.0 image) camera for my ARM4I processor. The code should
be in C# but C++ will be fine also.
Thanks,
Pauli get this on the hyperterminal when i run the cameradshowapp.exe
Compulab Windows CE NAND X-Loader for CM-T35
Built Dec 20 2009 at 16:48:16
Version 1.01.222
Commit Date 16/12/09
Jumping to bootloader
Microsoft Windows CE Bootloader Common Library Version 1.4 Built Dec 20 2009 16:
46:16
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0x200b
Texas Instruments Windows CE EBOOT for CM-T35, Built Dec 20 2009 at 16:48:10
Version 1.01.222
OMAP3430 Version 0x4b7ae02f (Unknown)
TPS659XX Version 0x10 (ES2.x)
-OEMPinMuxSetup....
System ready!
Preparing for download...
INFO: Predownload
+FMD_Init
Checking bootloader blocks are marked as reserved (Num = 6)
+FMD_Init
WARN: Boot config wasn't found, using defaults
+FMD_Init
OALFlashStoreOpen: 4096 blocks, 64 sectors/block
OALFlashStoreOpen: 2048 bytes/sector, 14 reserved blocks
Calling LCD_TurnOn
+FMD_Init
+FMD_Init
BLConfigureFlashPartitions: dwBootPartitionSectorCount = 0x5fff, partition actua
l size =0x4d3a!!!
Hit space to enter configuration menu 5...
Hit space to enter configuration menu 4...
Hit space to enter configuration menu 3...
Hit space to enter configuration menu 2...
Hit space to enter configuration menu 1...
INFO: Boot Device location = 0x8000020
Load NK image from flash memory
+FMD_Init
ROMHDR (pTOC = 0x823b8c28) ---------------------
DLL First : 0x4001c001
DLL Last : 0x41c7c0d8
Physical First : 0x84001000
Physical Last : 0x863bbdec
Num Modules : 294
RAM Start : 0x863c0000
RAM Free : 0x863d5000
RAM End : 0x90800000
Num Copy Entries
Copy Entries Offset : 0x85256e38
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files : 116
Kernel Flags : 0x00000002
FileSys RAM Percent : 0x00000020
Driver Glob Start : 0x00000000
Driver Glob Length : 0x00000000
CPU : 0x01c2
MiscFlags : 0x0002
Extensions : 0x84002020
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
NK Image Loaded
Launch Windows CE image by jumping to 0x80001000...
Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
+OEMInit
ýSETDATAOUT access is OK....
Forcing clean boot
MainMemoryEndAddress = 0x90800000
-OEMInit
+FMD_Init
Dumping registry defined VK
Row 0: 0x18 0x9 0x25 0x0 0x0 0x0
Row 1: 0x26 0xd 0x28 0x0 0x0 0x0
Row 2: 0x27 0x24 0x23 0x0 0x0 0x0
Row 3: 0x0 0x0 0x0 0x0 0x0 0x0
Row 4: 0x0 0x0 0x0 0x0 0x0
Row 5: 0x0 0x0 0x0 0x0 0x0 0x0
SMSC922x: Core Ethernet Init.
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:0a:a0:db
Lan9220 identified. ID_REV = 0x92200000
SMSC922x: MAC address = 00:01:c0:09:88:80
SDIO8686: Loading Driver [version = 38.p44]
SDIO8686: Reset with TPS GPIO 2 --> done
!!!Kernel mode PSL 'PRdr' de-registered!!!
!!!Kernel mode PSL 'HRdr' de-registered!!!
!!!Kernel mode PSL 'FRdr' de-registered!!!
EHCI USB Host: HcdPdd_Init+
[OTG] OMAPMHSUSBOTG::Init()+
OMAPMHSUSBOTG::PostInit(): Start.
DSPLINK Module (1.61.04) created on Date: Jun 24 2009 Time: 16:30:52
Display parameters:
Height = 0x280
Width = 0x1e0
HSW = 0x20
HFP = 0x8
HBP = 0x17
VSW = 0x1
VFP = 0x4
VBP = 0x3
DVI is not enabled
PixelClkDiv = 0x7
LogClkDiv = 0x1
ClkSelDSS = 0x5
TD035:: LCDTurnOn
TD035STEE1: Turned display on.
TD035:: Finished LCD VGA init
AUTOLAUNCH: Checking HKEY_LOCAL_MACHINE\Startup key for programs to run.
Can't open HKEY_LOCAL_MACHINE\Startup key.
[WiFi]: Firmware Version: 9.70.3.23
CCaptureFramework: Failed setting up the camera data.
CameraDShowApp: Initializing the camera driver list failed.CameraDShowApp: Retri
eving the driver list failed.CameraDShowApp: Selecting the camera device failed.
CameraDShowApp: Selecting the camera device failed.CameraDShowApp: Selecting the
camera device failed.CameraDShowApp: Selecting the camera device failed.CCaptur
eFramework: Retrieving the still stream config failed.
CameraDShowApp: Initializing the capture graph failed. -
Source code for "Creating an Extended Web Dynpro Application"?
Hello!
I'm a rookie in the field of SAP Netweaver and I'm justing getting started with some tutorials. My problems with "Creating an Extended Web Dynpro Application" are to massive to be posted on this forum in this stage. What I want to have some help with is to find the source code for that tutorial so I can get som guidence from there.
Following text is cut out of this page:
http://help.sap.com/saphelp_nw70/helpdata/EN/5d/f42fef2eec724597a03b6bcc670c2c/frameset.htm
Creating an Extended Web Dynpro Application
You can download the Web Dynpro project for the current tutorial from the Software Developer Network SDN (http://sdn.sap.com -> Web Application Server -> Web Dynpro -> Sample Applications and Tutorials) in two versions: one skeleton version you can use for exercises and one final version (solution) for an immediate build, deployment and run on the Java engine of the SAP Web Application Server.
How hard I try I can't find the specific source code on sdn.sap.com
Does anyone have a clue where it is?
Thanks!
Best regards
/Johan Månsson LindströHi!
I did what you said but I seem to miss the IDE folder. This is what it looks in my Explorer
C: > Program Files > SAP > IDE > CE > eclipse > (no folder called "examples")
I also did a search in this eclipse folder for "examples" but I did'nt find the example I'm looking for
I am running a newer version of NWDS:
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP03 PAT0000
Maybe that's why things don't look the same? -
Need sample source code for calling stored procedure in Oracle
Hi.
I try to call stored procedure in oracle using JCA JDBC.
Anybody have sample source code for that ?
Regards, Arnold.Thank you very much for a very quick reply. It worked, but I have an extended problem for which I would like to have a solution. Thank you very much in advance for your help. The problem is described below.
I have the Procedure defined as below in the SFCS1 package body
Procedure Company_Selection(O_Cursor IN OUT T_Cursor)
BEGIN
Open O_Cursor FOR
SELECT CompanyId, CompanyName
FROM Company
WHERE CompanyProvince IN ('AL','AK');
END Company_Selection;
In the Oracle Forms, I have a datablock based on the above stored procedure. When I execute the form and from the menu if I click on Execute Query the data block gets filled up with data (The datablock is configured to display 10 items as a tabular form).
At this point in time, I want to automate the process of displaying the data, hence I created a button and from there I want to call this stored procedure. So, in the button trigger I have the following statements
DECLARE
A SFCS1.T_Cursor;
BEGIN
SFCS1.Company_Selection(A);
go_Block ('Block36');
The cursor goes to the corresponding block, but does not display any data. Can you tell me how to get the data displayed. In the future versions, I'm planning to put variables in the WHERE clause. -
How to view the source code for Native Method
hi
i am using some native methods in to my code ;
can anybody tell me how to view the source code for the same ;
nikBuy/acquire a C/C++/assembly code disassembler and run the shared library through it.
-
Source Code for Business Package Assets
If anyone customized I would like to know how to get to the Java source code for Asset Business Package
Regards
MikeAugustine Vinish wrote:
Hi Team ,
I have find out the source code of the Package from dba_source at text column .
How can I find out
*1 .where the Database is mounted ie Server information and*
*2 .Name of the Sql file contains the package body*
*3 .location of the file in the Server*
Regards ,
AugustineHi - the source code isn't read in from a file by the database, it's actually stored in the database itself (have a look at the user_source view). Now you may have text files backups of your source code, that have been used previously to create the packages, but the database won't store any info about the file used to do this. -
How do I see the source code for 'NI Example Finder'?
At the LabView Express demo, the rep showed us how to view the source code for 'NI Example Finder' (started with Help, Find Examples...). Please refresh my memory.
--toddThere are a couple of VI's that shipped with LabView 7.0, but you can't see the diagrams.
C:\Program Files\National Instruments\LabVIEW 7.0\resource\system\HelpServer.llb\Run Example Finder__NATIONAL INSTRUMENTS.vi
Press Ctrl-E on this VI and it prompts you for a password.
This VI is run by C:\Program Files\National Instruments\LabVIEW 7.0\resource\system\HelpServer.llb\HelpServer__NATIONAL INSTRUMENTS.vi
There's also C:\Program Files\National Instruments\LabVIEW 7.0\help\_exfinder.llb\Example Finder Launcher.vi.
Tyring to open this VI starts the NI Example Finder. Note the taskbar icon which is different from the normal VI icon.
It seems like NI is trying to keep us out, even if it used LabView to develop the Example Finder. -
Where can I get the source code for sun classes?
Hello,
When ever you download sun's j2sdk, the archive always contains the source code for the entire sdk in a zip file called src.zip except the sun.xxx classes like sun.awt.print.PrintDialog or sun.awt.font.FontResolver.
For debugging purposes I need, if availabe, the source code of these classes which are not present in the src.zip.
Please can someone tell me if theses classes are available as source and can point me where I can find it cause I am searching for it but can't find it on the net.
Thank you
CarolinHey ChuckBing
And your way is the only way, right? No.What on earth is eating you? Highly sensitive today?
Where is the problem? There are two solutions of the question.
The one link I posted points directly to the sun source download link. The "readme" explains, yippie, the sun sources are contained. Easy, isn't it?
With the other one, you have to navigate at least through two other pages before you might find the link and only if you recognize that "Download JDK 5.0 source via SCSL/JRL" means the sun source code and not the sources contained in the JDK download. This is what I thought as I've seen this link the first time. Unfortunately there is no "readme".
I prefer the easy way, I dont want to earn a doctorate. Ok, you can say dont "play the woman", but I'm a woman and a blonde too;-)
But, let us stop the idle discussion here, please!
Nevertheless, thanks to you and [email protected] for answering. -
Html code(source code) for a web page
hi all
i want to get the source code for a web page throgh
my java program .please can you tell me how to do it.
thanksgive this a try.
import java.awt.*;
import javax.swing.*;
import java.net.*;
import java.io.*;
public class JApplet1 extends JApplet
public void init()
getContentPane().setLayout(null);
setSize(470,391);
JButton1.setText("google.com");
getContentPane().add(JButton1);
JButton1.setBounds(12,12,120,24);
getContentPane().add(JScrollPane1);
JScrollPane1.setBounds(12,48,444,336);
JScrollPane1.getViewport().add(JTextArea1);
JTextArea1.setBounds(0,0,440,332);
SymMouse aSymMouse = new SymMouse();
JButton1.addMouseListener(aSymMouse);
javax.swing.JButton JButton1 = new javax.swing.JButton();
javax.swing.JScrollPane JScrollPane1 = new javax.swing.JScrollPane();
javax.swing.JTextArea JTextArea1 = new javax.swing.JTextArea();
class SymMouse extends java.awt.event.MouseAdapter
public void mouseClicked(java.awt.event.MouseEvent event)
Object object = event.getSource();
if (object == JButton1)
JButton1_mouseClicked(event);
URL u;
URLConnection conn;
InputStreamReader in;
BufferedReader data;
String line;
StringBuffer buf = new StringBuffer();
void JButton1_mouseClicked(java.awt.event.MouseEvent event)
try{
u = new URL("http://www.google.com");
conn = u.openConnection();
in = new InputStreamReader(conn.getInputStream());
data = new BufferedReader(in);
while((line = data.readLine()) != null)
buf.append(line + "\n");
JTextArea1.setText(buf.toString());
}catch(Exception e){}
} -
Does anybody have the source code for playing video..?
Hi i am new to J2ME. Does any body have the source code for playing video?
The WTK includes a video player example. I would start by looking there. In addtion SE and Nokia (if I remember correctly) both have video examples on their developer web sites.
The developer sites are
http://forum.nokia.com
http://developer.sonyericsson.com
For some of my midlets I use a utility class. You can view the source here:
http://hostj2me.cliqcafe.com/www/forumtopicview.html?fid=46&categoryId=36&fpn=0
Works for my needs; -
i am struggling to find the page where EE provide the source code for their own branded devices.Devices such as the EE Rook, EE Harrier, EE Harrier Mini and Kestrel. these are just examples but the kernel source should be released of every device that you produce under GPL.whilst i understand this may not be for everyone, it is still a legal requirement that you upload these and any changes you make to the kernel thereafter. i have even seen Virginmedia supply source code that they used for their samsung set top box, so why can't you provide this?
HI,
It is unlikely you will get this information on this customer forum so I suggest you contact EE direct and ask them.
Thanks, -
Need to view source code for API classes
Any tips on where to find the .java files or source code for Java 2 5.0 classes?
With Java being open source, you'd think that it woud be easy to find this. But I've tried doing a few searches but te results haven't been helpful.
Cheers!Yeah I think I found it. Unfortunately there's a problem with downloading from Sun at the moment; fatal exceptions on every attempt.
Wait and try later, I guess. -
Where's the source code for the MIDP 2.0
Hi
does anybody know if the source code for the MIDP 2.0 is available anywhere, if so please give me the link, I've searched for it but couldn't find. I need it to create a custom class based on the Command class, but need to have a look at the source code of the "Command" to make the appropriate changes to my extending class, so I can't do it without a look under the hood.
Any help would be greatly appreciatedYou can find reference implementations at http://java.sun.com/products/midp/index.jsp
But they are only to assist manufacturers in implementing their own versions, and do not necessarily reflect the code running on a given device. All you can assume is what is stated in the MIDP specification. However, reading the RI code may help you better understand the spec. -
Where's the source code for the JavaFX 8 Samples?
Hi,
I just downloaded the samples for JavaFX 8 and the menu popup on the top left really caught my attention.
I'd like to study the source code for it. Does anyone know where I can find it?
I expected it here http://hg.openjdk.java.net/openjfx/8/master/rt/file but it seems it's not there.
Alternatively: Jasper Potts presented a Kiosk App at Devoxx 2012 (Antwerp), which was also used at JavaOne. I think this app uses the same Menu. And he said sources are available. But I can't remember the link.Oh, too obvious. They are directly included into the zip. My bad I didn't notice them. I had expected them to be online somewhere. Thanks!
-
Where is java source code for TitledBorder
Where is java source code for TitledBorder?
I don't want to decompile it, as it may be slightly different than the original.
Is it in some jar file on my computer?
ThanksIt's different from the original because the names of objects are different. I decompiled them, because I didn't feel like paging through that URL to find them.
I was trying to fix the TitledBorder, because it leaves like 2 pixels of padding outside of the border, but all the variables I change in that class don't seem to correct that.
Maybe you are looking for
-
How do I set up my Home Page to open when I open a new tab?
I want my home page to appear when I open a new tab but I only get a blank screen... is there anyway to fix this?
-
We have an app that cant pass valid oracle dates. They have to pass YYYYMMDD. So there is a view on a LARGE partitioned table based on dates. Problem is the query doesnt see the date, they see the function on the date. create view x as select to_char
-
Fan for a macbook 13" (Jan 2008 model)
This is the fan installed in my apple macbook 13inch - Jan 2008 2.3Ghz Core duo. I've now bought three replacement fans supposedly for this model macbook and ALL THREE are smaller than the one illustrated (installed in my macbook) All of the ones tha
-
I have a case where I have several components in a grid panel all in one column. These components are stacked one on top of the other. Most of the components I can size the width to what I want, but I am not able to set the width of the drop down com
-
None of the Album Artwork is displaying in the iTunes store?
I opened Itunes to search for the new Michael Jackson song, and noticed that ALL of the album artwork in the iTunes store is not displaying. All of my music in my personal iTunes library is displaying artwork correctly. In the iTunes store, all the m