Visual basic iview in Portal
Dear Experts,
I have to bring a visual basic appilcation as iview in Portal. Can you please tell me whether there is a possibility to do that. If there is a possibility can you please tell me the procedure to create it.
Regards,
Bharath
Bharat,
This thread might be something you are looking for.
Re: Visual Basic application ivew
Good Luck!
Sandeep Tudumu
Similar Messages
-
Import Visual Composer iView to portal
Hi experts,
My question is: how can I import the VC generated iView into the portal as a fix iView?
To give you an example: When I am in the portal I would like to access the VC generated iView by clicking on a fix navigation item, in order to be able to open this iView(Report) anytime I want.
I would appreciate any suggestions
Thanks!
ThomasHi Thomas,
Follow the following steps:
1. When you are deploying from VC, click check button and noe down the name of the par file.
2. open your portal page using administrator credentials using the following link as example - http://<ip address>:50000/irj/portal
3. Click the tab Java Developer
4. Click the "PDK Component Starter&Viewer" link on the right-hand side frame.
5. Go to Overview tab.
6. Select your par, for example - com.autogen.guimachine.testbapi1.iView_GYI
7. Click Details link
8. Click Start link.
Check out the url in the browser, save it if you need that for future use.
Thanks in advance,
Deep. -
How do i add an iView to portal in Visual Composer 7.1
hello all,
how do i add an iView to portal in Visual Composer 7.1.
any documents related to it, will be very helpful.
thanks in advance.
Santhosh Guptha NHi Santhosh,
[Here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/visualcomposer/modeling%20portal%20content%20with%20visual%20composer.pdf] you go.
Good Luck,
Dharmi -
Export to PDF option in Visual Composer iView
Hi Expert,
I am using NW 7.0 .Want to develop a Visual Composer iView based on RFC function module to fetch the data from backend and publish in portal.
In that iView I want to give the Export to PDF option for the corresponding SAP data.
I am referring following link for the same.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123?QuickLink=index&overridelayout=true
But in my case our Visual Composer and BI-JAVA server are different. In this document it is clearly mention that the given code (Formula) is applicable only for the case where both VC and BI-JAVA server are same.
Specify this formula:
"pcd!3aportal_content!2fcom.sap.pct!2fplatform_a
dd_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.b
ex?QUERY=" & STORE@REPTNAME &
"&BI_COMMAND_1-
BI_COMMAND_TYPE=EXPORT&BI_COMMAND
1-EXPORTFORMAT=PDF&BI_COMMAND_1-
SHOW_EXPORT_DIALOG=X&BI_COMMAND_1-
null="
NOTE: This URL is for the Web
Analyzer PCD Location if Visual
Composer is on the same server as
BI-JAVA.
Can someone explain how to modify the above formula to give the export to PDF option in my iView where Visual Composer and BI-JAVA are different server?
Thanks & Regards,
KundanHi,
Sorry for late replay. Yes i tried complete URL .But i am getting error..
I am using ECC 6.O.Both VC and BI-JAVA are in same landscape. I am calling the FM ZBAPI_FM_TEST_APPLICATION.
I want to know the modified URL for giving the Export to PDF option in VC iView.
The document which i am following their it's URL for calling BI Quarry is
"pcd!3aportal_content!2fcom.sap.pct!2fplatform_a
dd_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.b
ex?QUERY=" & STORE@REPTNAME &
"&BI_COMMAND_1-
BI_COMMAND_TYPE=EXPORT&BI_COMMAND
1-EXPORTFORMAT=PDF&BI_COMMAND_1-
SHOW_EXPORT_DIALOG=X&BI_COMMAND_1-
null="
Thanks & Best Regards,
Kundan -
Using FLEX Visual Composer iViews in Guided Procedures and the UWL
Hello Experts,
I am trying to display a GP workitem and I am getting this error
"The portal page builder required to execute this callable object is not available."
I have a GP Process and it haves FLEX Visual Composer iView, it runs fine un the Runtime workbench from Guided procedures Role, but when I configure de GP UWL Connector and try to open a GP workitem with a VC FLEX iView i got the error "The portal page builder required to execute this callable object is not available." Guided procedures with webdynpro iView works fine.
I have a NW 7.0 SP10
Could you please help me undertand what configuration I am missing??
Regards.Hi Daniel
Please go through the following link(looks like a helpful one):-
Link Between Visual Composer and Guided Procedure
Regards
Navneet -
Dear all:
when i previewed iView in the portal, i got some problems.
please give me some advices.Thanks~
1. Exception caught: com.sap.ip.bi.base.service.connection.ConnectionException: No connection exists for system "BP5"
com.sap.ip.bi.base.service.connection.ConnectionException: No connection exists for system "BP5"
at com.sap.ip.bi.base.portal.connection.PortalConnectionPool.getConnection(PortalConn... [see details]
2.Exception caught: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing
com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518)... [see details]Hi Aaron,
Check whether you have set all the following properties or not.
If not do this then you will be able to preview the iview in portal.
Connector - contains basic connectivty details
Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs,
Web Application Server - if you wish to access BSPs and/or Web Dynpro for ABAP and
User Management.
You also need at least one System Alias has to be defined from the Display drop down menu.
Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system.
Go through the below link which guides you in step-by-step creation.
https://wiki.sdn.sap.com/wiki/display/EP/HowtoConnecttoSAPR3SystemthroughEnterprisePortal7.0Usingan+iView.
Hope it helps you.
Regards,
Ponneswari.
Edited by: Ponneswari Adapa on Apr 15, 2010 6:15 AM -
Transporting VC Models and related pages and iviews across portals
Hi,
Hope you all are doing good.
We have a particular requirement, which i hope you will be able to give some inputs.
We have models for which we have .gml files. In addition we have the models deployed in Portal as iviews under Visual Composer folder.
Our requirements is to transport the models in VC and iviews in Portal to a new installation.
When we take the content dump from portal for the models and import into new installation it works fine.
But when we want to make changes in VC model (.gml) files and redeploy the VC application in Portal, it does not over write the existing iview for same VC application in Portal.
The ID's of the deployed iviews for same VC appls are getting changed and hence not updating the same one.
Any idea what we are missing ?
Appreciate your help
Regards
SumitHI Sumit,
Whenever you import .gml file in new Portal firstly one model name should be created then only we can import the existing model from Dev box at that time the package name differ in such case.
this may be a precaution from SAP
I also tried the same thing what you did but getting the same kind of deployment what you are getting.
Hope your doubt are clear
Swapnil -
Visual Basic UFLs pick is missing from the Additional Functions Tree
I am trying to add a custom function written in VB to a Crystal report. I have stepped through the entire process and have a dll ready to go. I cannot see the Visual Basic UFLs pick under Additional Functions in the Formula editor tree.
Details on Environment:
Windows 7 64 bit
Visual Studio Professional 2008
Crystal Reports 10
.NET 3.5 SP1
Any assistance would be greatly appreciated.
Thanks,
JemalHi Jemal,
It could be a bug. U2lcom is a legacy UFL bridge between COM and CR. Newer versions of CR has a new u212manager to manage UFL's in .NET and it' snot in CR Basic and version 10.5 runtime. It may be placed in the x64 folder but it may not work.
There was one [CR for .NET|https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe] patch that may have fixed the issue but if it doesn't your only option may be to upgrade to VS 2010 and CR for VS 2010 and then use this [UFL sample|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633303333333333383331%7D.do] and update your Project and UFL.
CR for VS 2010 is a full feature version and includes RAS which gives you much more functionality.
See this page for more info: http://www.sdn.sap.com/irj/boc/crystalreports-dotnet
It may be due to the 64 bit GAC is having problems find your dll. Try renaming the one in the x86 folder:
C:Program Files (x86)Business ObjectsCommon2.8 in
And see if it throws a new error, if it does then verify it is loading the dll from the x64 folder.
Don -
EP tool - Visual Composer, iviews
Hi all,
I am a ABAPer..., very new in EP.
can anyone suggests me Book / Website,,, to get basic level EP - Visual Composer, Iviews and configuration genie..,Hi Rajasekaran,
this book by sap-press.de is verry good:
"SAP NetWeaver Visual Composer" ISBN 978-1-59229-099-4
and there are also eLearnings in sdn:
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/2e26bafe-0a01-0010-34b6-a3d3a4c1d217 [original link is broken]
Hope that will help you -
* How to Depoly NDWS Iview in Portal*
Hi
i got a very basic question
I am able to create a Iview in WebDynPro (NWDS)
and deploy it very comfortably.
Similarly,
I am able to create a Iview in PORTAL and check for the PreView.
Now Query Over this point is,
if i create a View in Dynpro , how to incorporate in Portal Page
or
how to incorporate it in Portal Workset.
and
How to assing a Role to the view that has been created in NWDS
Thanking in Advance.Hi Kumar,
Solution for your query is at the end but first let me focus on some terminologies -
1> Whenever you deply any application from NWDS it doesn't create any IView. IT just gived u a application URL nothing more than that.
Soltuion:
Just Deploy your application from NWDS
Go to portal>Content Administration> Create a Web dynpro IView--> whenever it will ask you for application name just specify the application name spo that this IView will get link to that application.
Finish it.
Create a page from Content Administrato. Assign this Iview to this Page.
No create a Workset from Content Administration--> assign this page to this Workset.
Create a role from Content Administration and assign this workset to this Role.
Now from UserAdminisstration assign this role to specific userid for whcihc you have to perform opertaions
Definintely this will work for you..
Regards,
Roshan -
Calling Visual Composer iview into WDA view???
Hello all,
Can we call a visual composer iview into WDA view? if YES, can someone let me know how to do that.Hi Govindu,
Thanks for the links.
1. We have created a new iView by the option Copy and Paste as Dela link in customer specific folder under PCD for the iView which is stored in standard PCD>Visual Composer>Models folder.
2. We can transport the content with export and import options but as per the SAP recommendation we should also need to transport the Localisation and Par files for the Model. But we are unable to find these. Could you please share your knowledge-------How to generate Localisation and Par files for a VC Model and collect these into a Portal transport.
Thanks again.
..Ravi -
URGENT HELP :WEBSERVICES - VISUAL BASIC/POWERBUILDER
CAN AN APPLICATION BUILT USING VISUAL BASIC(APP A) OR POWER BUILDER(APP B) MAKE A WEBSERVICE CALL TO A JAVA APPLICATION.THE REQUIREMENT IS..APP A & APP B SHOULD TALK TO A JAVA BASED APPLICATION BY PASSING INPUTS AND THE JAVA APP PROCESSES THE INPUTS AND SENDS BACK THE OUTPUT TO APP A & APP B.
IS THIS POSSIBLE USING JAVA WEBSERVICES? IF YES..HOW? ELSE ANY WAY OUTS?
-IKIK,
A new XML/JAVA adapter for Visual Basic and PowerBuilder (named ActiveEC) can accomplish the integration scenario you describe. From the product site:
"With no PB or VB code changes or migration, ActiveEC instantly creates XML ?black boxes? for existing PowerBuilder and Visual Basic applications, enabling them to communicate with portals, Web services, business process compositions and other applications. All PB/VB application security and integrity is maintained, and the existing applications can continue to be used through the native PB/VB interfaces. The unique part of the technology is that it requires no changes to the underlying application code, so it can be used easily and safely with "legacy" client/server apps. This technology instantly discovers all application and screen controls to deploy reliable, complete Web services. Once you deploy an ActiveEC service, you can invoke this service through the following standard interfaces: Web service, EJB, JMS, .NET assembly"
http://www.active-endpoints.com/products/activeec/index.html
HTH,
A.J. -
Hi,
I'm having a problem in calling the Java Applet's Function from Visual Basic. First, I'm getting the handle of the Java Applet and components of it using "Document.Applets(n)" which is a HTML function. I'm calling this function from Visual Basic. My code is something like this...
' // Web1 is IE Browser in my Form.
Dim Ap,Comp
Dim Bol as Boolean
Bol = true
Ap = Web1.Document.Applets(0).getWindow() ' \\ Gets the Parent Window.
Ap.setTitle("My Java Applet") ' \\ Sets the Title of the window.
msgbox Ap.getVisibility() ' \\ This will return a Java boolean ( true or false )
Ap.setVisibility(Bol) ' \\ Function Syntax is : void setVisibility(boolean b)
Here in my code , i'm able to call any function that which accepts Integer or String but not boolean. So, i m facing problem with Ap.setVisibility() function. It gives me a "Type mismatch error" while executing it. Can you please tell me a way to do this from Visual Basic !
I'm using Visual Basic 6.0, Windows 2000 , J2SDK 1.4.2_05.
Please help me Friends.
Thanks and Regards,
Srinivas Annam.Hi
I am not sure about this solution. try this
Declare a variable as variant and store the boolean value in that variable and then use in ur method.
Post ur reply in this forum.
bye for now
sat -
I have a copy of Labview base package version 5.1.1 and Microsoft Visual Basic 6.0 in my PII 333 128M PC. I like to use the NI-VISA feature to develope my own testing program by using Visual Basic. However, the NI-VISA library (i.e. visa32.dll) can not be found from the Visual Basic reference library.
Go PROJECT | REFERENCES menu. In the list, look for "VISA library".
If the list does not show it, then BROWSE the visa32.dll located in the
WinNT\SYSTEM32 folder.
If the VISA library is earlier than V2.x, there is no TypeLib supported.
Makoto
"rfan99" wrote in message
news:506500000008000000B6180000-984882144000@quiq.com...
> I have a copy of Labview base package version 5.1.1 and Microsoft
> Visual Basic 6.0 in my PII 333 128M PC. I like to use the NI-VISA
> feature to develope my own testing program by using Visual Basic.
> However, the NI-VISA library (i.e. visa32.dll) can not be found from
> the Visual Basic reference library. -
Error on Visual Basic 6.0 and Crystal Reports 9.2 on XP SO
We need support to resolve an error on a system made with Visual Basic 6.x and Crystal Reports 9.2.
Error '-2147417848 (80010108)'
Automation Error
Not always give these errors.
Often occurs after request two reports followed and SO is XP
When SO is Windows 2000 professional this error not occurs.
These are versions of the products used:
Versión Visual Basic: 6.0.9782
Versión Cristal Reports: 9.2.0.448Hello,
This forum is for community use and is not considered a support site. For assistance you need to purchase a case from our support site. But 9 is no longer a supported version so this is your only place to get assistance.
Try downloading the only patches available from:
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90actxwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90dbexwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90devwin_en.zip
ftp://ftp1.businessobjects.com/outgoing/CHF/cr90mainwin_en.zip
Thank you
Don
Maybe you are looking for
-
Mid 2014 13" rMBP full charge gives 4:49 minutes of use
Hello- This is my first Macbook purchase. It is 2 weeks old, refurbished from Apple. rMBP 13" 3.0 GHz i7 16gb 128. I received it and it was at 53% with 4 cycles. It adds cycles without even being plugged in to charge. It looses about 1% a minute. I h
-
Snow Leopard install doesn't recognize system disk
I'm trying to upgrade a MacPro1,1 running Leopard 10.5.8 to Snow Leopard. The system has 3 hard drives, two striped RAID sets, each made with two physical drives and an external hard drive enclosure used for Time Machine. When I run the SL installer,
-
Xcelsius 2008 Engage Won't Install in Windows 7
The installation of Xcelsius 2008 Engage completes but the program cannot be used at all because the license key is stated to be missing or invalid. This is a common problem on other systems but it can be worked around in various ways. However the wo
-
Additional Extended Withholding Tax for Chile.
Dear Gurus, I've received a request for an additional WIthholding tax used in chile for Foreigner which are not living at chile. The description I've received was as follows. If a Downpayment is applied the Withholding Tax should be set at the Downpa
-
How do i get my moives off my ipod to my new computer?
i got a new computer and i cant get my moives off my old computer to this one. but there all on my ipod can i pull them off my ipod to my new computer? im wanting to get rid of my ipod cuz i just dont use it at all, but i dont wanna lose the data off