Visual C++ error, CS5

I have been getting a Visual C++ error when I press the print button, sometimes. No info, just a window stating a Visual C++ error and an OK to close CS5. Have to reboot the PC to start CS5 again. My only solution is in sert the CS5 CD and re-install.
Any other suggestions, before I try the re-install.
thanks

Just an update. Sorry I forgot to mention that I share the Epson 3800 with my other computer. When I hit print it goes to the other PC and then to the printer. I have had this setup for several years with my 3800 and 2800.
Since the 3800 can be networked, I printed using the network by-passing the other PC. Everything worked fine.
I found a solution, but did not fix the problem. Oh well, whatever works.
Thanks for your suggestions.

Similar Messages

Windows Visual C++ error (?)

I've been burning discs via ITunes for six months w/o issue. I recently started having a problem: After the cd burning finishes I get a quick audio blast followed by a 'Windows Visual C++' error tab on my bottom toolbar, and a rotating blue hourglass. This rotating hourglass does not go away unless I restart my pc. I have ITunes 7.5 installed. Any ideas? Thank you.

Could you please paste the whole error message here or check the event viewer to find error information about office and windows explorer?
Please keep you win7 up-to-date, you can also try
Start your computer in safe mode
http://windows.microsoft.com/en-in/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7
If you issue persists, refer to this link (reply posted by Andre), then upload the crash dump file here.
http://social.technet.microsoft.com/Forums/windows/en-US/88c1f21d-7c04-4c59-aed3-d98fa674dfe7/explorer-crash-restart?forum=w7itproui
Regards
Yolanda
TechNet Community Support

Runtime visual C++ error related to nimxs.exe

Hi
I am getting a microsoft visual c++ error saying that this application has requested to be terminated in an unusal way and it points to nimxs.exe and mentions to contact applicatons support team. Everythingwas running fine one moment and then I had to reboot the system and this error mesaage pooped up and now I cann't open any VI or MAX. This machine was not connected to onternet and it doesn't have any anti virus software on it.
I am really confused how to fix this. I browsed some message about some people saying that they have seen similar problem but couldn't find a fix.
Software
Windows 2000
LabVIEW 7.0, 7.1
MAX 4.0
Any help would be appreciated. I have lots of important vis on this machine and I need them to work ASAP
Thanks
Ankit

Hello Ankit,
I would try to go back and see if your hardware and driver are actually working from MAX. From your message, looks like you are trying this already but MAX is closing on you! LabVIEW is also closing on you or just when you run VIs that call the hardware?
Make sure you do not have a corrupted file in MAX using this Knowledgebase: Why Do I Get a Measurement & Automation Explorer (MAX) Database Connection Error?
Finally, try to repair the driver and do not worry about the C++ program until you actually can see a working Test Panel in MAX. I think there is corruption in the driver and probably a repair will be needed.
Hope this helps for now,
Gerardo O.
RF Systems Engineering
National Instruments

Visual C++ Errors When trying to update ITunes on Win 8.1

Visual C++ Errors When trying to update ITunes on Win 8.1

Steve, glad that you solved it yourself, but it might be worth taking on board that the steps you mention have not been sufficient for many people which is why Apple and others like myself have been offering somewhat deeper advice. Perhaps reiterating what has often already been suggested in such threads is not really necessary.
Not that you've asked for a critique of your style, but the first sentence of your post above that you are copying elsewhere is appropriate in this thread where you are replying directly to me, anywhere else it perhaps suggests that others should have been able to do likewise and comes over a tad arrogant, though I'm sure that isn't the intention. I wouldn't include it...
All the best.
tt2

I am getting a Miscrosoft Visual Runtime Error. How do I fix it.

Here is the error screen that pops up when I open Photodhop Elements 10. When I click ok Photoshop closes and will not do anything.
Here is the Photoshop Window.
What can I do to fix this?
Thank You

Lots of info here:
https://www.google.com/search?q=Miscrosoft+Visual+Runtime+Error.&rlz=1C1_____enUS421US421& oq=Miscrosoft+Visual+Runtime+Error.&aqs=chrome..69i57&sourceid=chrome&es_sm=122&ie=UTF-8#q =photoshop+elements+Miscrosoft+Visual+Runtime+Error

Visual Studio Error in UNIX FTP for AIX

I am using a VS2010 Web Site Project to access files on our
AIX server (Unix). (Pre-compiled website).
Using Add > Existing Web Site, I have established an FTP session within my project which shows all of the Unix files and folders.
We just found out that there were two folders on the AIX side with the same name, differing case:
/MDM/Custom & /MDM/custom
On the Unix side:
To fix this, I edited the folders to move all of the stuff within /MDM/Custom into
/MDM/custom, then I deleted /MDM/Custom entirely.
So back to VS2010 on the Windows side:
I deleted the website from the project and exited VS.
I deleted all the files in %TEMP% and restarted VS.
I restarted VS and recreated the web site in the project using Add > Existing Web Site.
The only folder showing is /MDM/Custom which has nothing in it.
Refreshing the folders produces error 550. (No such file or directory).
How do I recover from this situation? Where is VS storing the bogus folder name?
P.S.: This is a pre-compiled web project
ProjectSection(WebsiteProperties) = preProject
~ Shaun
~ Shaun

Hello Shaun,
Welcome to MSDN forum.
Your issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because you are working with ASP.NET website, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Adobe media encoder components have different versions error CS5 (32 bit)

I updated the CS5 suite the other day and all the updates installed fine, except adobe media encoder which said "done with errors" (no indication of what the errors were mind you).
Now, when I open Adobe Media Encoder (CS5) it pops up saying "Adobe Media Encoder components have different versions. Please update Adobe Media Encoder."
This is the 32 bit v of CS5 (so no Premiere or AE) but Adobe Media Encoder is still used to encode flv etc for the web (Flash and Dreamweaver).
The CS4 suite version of Adobe Media Encoder (that does have Premiere and AE) works the same as always. Has anyone else noticed this?

This was a problem with the installer.
We have updated and posted a new version to Adobe.com.
If you still get error on launch, you can download the new patch and install it to fix this issue:
1.       Go to http://www.adobe.com/support/downloads/detail.jsp?ftpID=4869
2.       Download the patch and save it on your Hard drive.
3.       Unzip the file.
After unzipping the file, you should end up with one installer and two folders:
4.       Dbl-click on “AdobePatchInstaller.exe”.
This will over write the previous 5.01 patch you installed with new one.
Since we didn't actually change the files inside the patch, but basically fixed the installer, this update has the same update number 5.0.1.
We have also updated the update manager and future automated updates won't have this issue.

Received notice from Apple to upgrade iTunes on my Dell PC running windows 7 Ultra. Update failed numerous times with error message R6034 Microsoft visual C error. Apple instructions to remove itunes and reinstall. Reinstall failed (same Err). HELP!

Received notice from Apple to upgrade iTunes with 11.1.4 on my Dell PC running Win 7 Ultra.During upgrade got error message R6034 several tries (app's attempt to load C runtime library incorrectly in Visual C + + runtime library). Apple's suggestion to uninstall iTunes and reinstall with ver. 11.1.4. Tried that, it failed too. Now have no iTunes, think I have lost all saved podcasts and music, and get no help from Apple. What to do?

Try this: Troubleshooting issues with iTunes for Windows updates.
tt2

BI Integration Wizard in Visual Composer Error

Hi Experts,
I try to run BI run BI Integration Wizard in Visual Composer.
It is displaying me an error
Warning 2005:There are no BI systems defined in portal.In order to use the BI Integration Wizard,You must first define atlease one BI system based on BI Java Connector BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector.
Before i contact my Basis/Portal team i would like to know what does it mean
Could you please update me what does creating a BI system in portal based on BI Java Connector BI XMLA, BI ODBO, BI JDBC, or BI SAP Query Connector.
Thanks

Hi,
Yes ,Even you have the BI system in portal the Connector for
that sytem is RFC not Other connectors
you can check for the type of connector in the portal click on the system open its properties there you find the Connector type
go for connection properties option.
see for more details.
[https://www.sdn.sap.com/irj/sdn/wiki]
Regards,
Goivndu

Solution for Visual composer error: 32k span and 64k byte limit

Dear friends,
I am getting the error in visual composer 32k span and 64k byte limit since last half year,
some time error will get resolved by adding layer in to model OR adding some table and form to model OR reduce the animation effect OR even by doing tab strip view for layer model, doing nested ivew.
but this solution not usefull for every time.
what should we do for this error(32k span and 64k byte limit),
is it solved by updating EP version or by EP java stack or any other updates which will solve the This VC error.
64k error i am getting is:
+Error in compiling Flex application: Error: A function in the code exceeds the 64K byte limit (actual size = '65570'). Since the problem occurs in the compiler-generated deferred instantiation code, please refactor/componentize portions of this document.
(/usr/sap/IBD/DVEBMGS10/j2ee/cluster/server0/GUIMachine_Business_Packages/Managment_cockpit11_31066/FLEX_COMPILATION_FOLEDR/AADCDM.mxml:19)
Failed to compile AADCDM.mxml+
hope to get answer form you,
Thanks and Regards,
Dushyant.

Hi,
I think it's better to post this question into the Visual Composer forum. Anyway, the 32k/64k bug is solved with the flex2 server which is already released.
Also have a look into the [Wiki page|https://wiki.sdn.sap.com/wiki/display/VC/64Kbytelimit].
Hope that helps!
Best Regards,
Marcel

Microsoft Visual C + + Error Message

When I open Adobe Photoshop Elements 11 I get a run time error with the heading "Microsoft Visual C + + Runtime Library". I have tried uninstalling all Visual C + + files and reinstalling the latest one and this hasnt worked. Please help.

Hi,
Please see if this helps:
http://helpx.adobe.com/photoshop-elements/kb/microsoft-c-runtime-error-launcing.html
Thanks,
Anwesha

Visual report error on master project

Hi,
I've created 2 distinct projects with custom fields, filled-in with a macro based on resource pool custom fields. Works fine.
For these projects, I've created an Excel visual reports that uses the custom fields (as dropdown lists). Also OK on both projects.
When I just insert both projects as sub-projects of a master projects (with same custom fields imported in the master project), I receive an "unknown error" when running the visual report. Any hint ?
Thanks

Thanks a lot Don for your valuable suggestions.
We have already taken care of the points which you mentioned in your reply on development side. Also, we have downloaded crystal report from the link which you posted but on DEPLOYMENT side we are unable to run reports from our application.
It gives the notification when we try to install crystal report on a target machine as "You must have visual studio 2010 installed in order to install the crystal report".
The DEPLOYMENT problem we are facing is in RUNTIME environment on TARGET machine. Our TRAGET machine has properly installed Win 7 Professional 64 bit, .NET Framework Ver 4 and CRforVS_redist_install_64bit_13_0_1 . We also have properly installed application on this machine. We got no errors while installing any of the above. The problem starts when we fire a report on target machine from the application.
We get the error as "The type initializer for 'CrystalDecisions.CrystalReports.Engine.ReportDocument' threw an exception"
So, we are looking for an appropriate RUN TIME version of Crystal Report which can be installed on the target machine to fire reports (where visual studio 2010 is not installed).
Please help suggest an exact version to download for target machine and the steps if it has a specific procedure.
Thank you!
Ruchir

Runtime error CS5.1

We are getting this message on both computors we use when we try to create a new file in encore CS5.1. Old files can be reused. runtime error Program :C:\PR... program has asked runtime to terminate in an unusual way.

http://helpx.adobe.com/x-productkb/global/troubleshoot-c-runtime-errors-products.html
Also http://www.microsoft.com/en-us/download/details.aspx?id=14632 for a Microsoft download
Also search http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US for Microsoft help articles

Visual Admin: error on loading service Web Services Security ? HELP

I wanted to consume a webservice to a remote R3 ECC 5 webservice with Visual Composer.
I added a web service client for VComposer using visual admin as:
Cluster->services->webServicesSecurity->
SecurityConfiguration->WebServiceClients->DynamicWSProxies->New
Added the remote host to R3 ECC5
<b>http://<host>:8000/inspection.wsil</b>
I keyed in the SID, client and language as per /people/community.user/blog/2007/04/04/consuming-webservice-in-visual-composer-1 .
I changed the security authentication to Basic and keyed in right user and password, saved the data.
It worked fine.
After I changed few values for SID, user, password on this properties, it gave me ERROR on loading service Web Services Security.
Can you please help to reset and put back the old config.
Thanks;

Thanks, I restarted it after an hour, it is working fine.

C RunTime Error CS5.5?

Hi,
When I try to start any program from my Adobe CS5.5 I suddenly got the error-message "C++ RunTime Error", what´s the solution for this message?
/Micke

Troubleshoot C++ runtime errors | Adobe products | Windows

Visual C++ error, CS5

Similar Messages

Maybe you are looking for